The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemic...The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemical and discharge tests. Results show that the synergetic effects of the dissolved Mn and Mn-modifying Al_(3)Fe intermetallic decrease the weight loss and inhibit the hydrogen evolution of commercial purity Al in Na OH solution when minor Mn is introduced. However, more Mn addition leads to the formation of Al_6Mn intermetallic,which has little effect on the weight loss, but accelerates the hydrogen evolution. Mn introduction plays a positive role in activating Al anodes, resulting in a decrease in the anodic polarization and an increase in the discharge voltage. Among all the commercial purity Al-x Mn anodes, 0.1 wt% Mn addition exhibits the best discharge efficiency for Al-air battery.展开更多
A novel type nano TiN/Ti composite grain refiner （TiN/Ti refiner） was prepared by high energy ball milling, and its effect on as-cast and hot-working microstructure of commercial purity aluminum （pure Al） was inve...A novel type nano TiN/Ti composite grain refiner （TiN/Ti refiner） was prepared by high energy ball milling, and its effect on as-cast and hot-working microstructure of commercial purity aluminum （pure Al） was investigated. The results show that TiN/Ti refiner exhibits excellent grain refining performances on pure Al. With an addition of 0.2% TiN/Ti refiner, the average grain size of pure Al decreases to 82 μm, which is smaller than that of pure Ti and Al 5Ti 1B master alloy as refiners. The microstructure of weld joint of pure Al with 0.1% TiN/Ti refiner is fine equiaxed grains and the hardness of weld joint is higher than that of the base metal. For pure Al with 40% cold deformation and recrystallization at 250 °C for 1.0 h, the grains of the sample added 0.1% Ti powder have an obvious grain growth behavior. In contrast, oriented grains caused by deformation have been eliminated, and there is no obvious grain growth in pure Al refined with 0.1% TiN/Ti refiner, indicating that nano TiN in the refiner inhibits the growth of grain during recrystallization.展开更多
In this work,the microstructure of titania coating fabricated on the surface of hydrostatically extruded titanium grade 4 with the use of the micro-arc oxidation method was studied.The surface topography and microstru...In this work,the microstructure of titania coating fabricated on the surface of hydrostatically extruded titanium grade 4 with the use of the micro-arc oxidation method was studied.The surface topography and microstructure investigations performed with atomic force microscopy and scanning and transmission electron microscopy revealed that,by using an Na_(2)HPO_(4)electrolyte,a well-adherent porous coating is produced on the top surface and side walls of the extruded rod.The distribution of chemical elements was analyzed by using energy dispersive X-ray spectroscopy.The chemical elements dissolved in the electrolyte(Na,P and O)incorporated into the coating.Sodium locates preferentially in the outer part of the coating,while phosphorus and oxygen are distributed throughout the whole coating.The most relevant finding shows that a grain refinement caused by a hydrostatic extrusion provoked an increase in density of high-angle grain boundaries(HAGB),which in turn secured the formation of a continuous amorphous layer close to the substrate.The presence of this layer compensates for the effect of anisotropic substrate,producing a comparable and homogenous microstructure with a large number of micropores.展开更多
Modifying effect and mechanism of trace rare earth on Fe(Si) rich impurity phases in commercial purity aluminum were studied with the aids of SEM, EDAX, TEM, etc. It is found that Ce rich mixed rare earth (RE) is an...Modifying effect and mechanism of trace rare earth on Fe(Si) rich impurity phases in commercial purity aluminum were studied with the aids of SEM, EDAX, TEM, etc. It is found that Ce rich mixed rare earth (RE) is an effective modifying agent, which makes the coarse Fe rich impurity phases transform into complex compounds of tiny, sphere/short stick form, thus improving mechanical properties of this material; its modifying mechanism is in that RE gathering in front of solid/liquid interface enters into the impurity phases, forming complex (AlFeSiRE) compounds; or is adsorbed in the impurity phases surface, impeding the growth of impurity phases; however, excessive RE will result in the increasing of RE compounds (secondary phases), and plasticity reduction of this material. Therefore, its addition amount should be less than 0 07% (mass fraction).展开更多
For further knowledge about the refining performance of AlTiC master alloys, Al5.5Ti0.25C and Al6.5Ti0.5C master alloys containing high Ti and C content were prepared and used in grain refining experiments of 99.8% co...For further knowledge about the refining performance of AlTiC master alloys, Al5.5Ti0.25C and Al6.5Ti0.5C master alloys containing high Ti and C content were prepared and used in grain refining experiments of 99.8% commercial pure aluminum(CPAl). Their performance was compared with two types of Al5Ti1B refiners whose performance was nowadays considered to be the best. These two types of master alloys show similar refining efficiency at the addition level of 0.2%. However, at the addition level of 0.5%, there still exists great performance difference between AlTiC and Al5TiB alloys in grain refinement of 99.98% and 99.995% high purity aluminum(HPAl). The growth of columnar grains is fully suppressed due to the refinement of AlTiC at the addition level of 0.5%. Also, at the same addition level, the grain refining experiments of Al3Ti0.15C and Al5Ti0.2C master alloys which have found initial commercial applications are conducted in the above-mentioned three types of pure aluminum. According to the experimental results, these two refiners of different compositions are both nonideal. The second phase particles extracted from each refiner were observed through TEM, while the nuclei of grains after grain refinement were observed through SEM. The results were analyzed through computation and comparison of the constitutional-supercooling parameter and the growth-restriction parameter whose values were determined by solute element in aluminum melt with different purity. Apparently, AlTiC master alloys with high content of Ti and C element have great refining potential.展开更多
基金financially supported by Anhui Provincial Natural Science Foundation (No. 1808085ME123)the Projects of International Cooperation and Exchanges in Anhui Provincial Key Project of Research and Development Plan (No.1804b06020363)the Priority Funding Scheme for Innovative Projects for Overseas Chinese Students in Anhui Province。
文摘The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemical and discharge tests. Results show that the synergetic effects of the dissolved Mn and Mn-modifying Al_(3)Fe intermetallic decrease the weight loss and inhibit the hydrogen evolution of commercial purity Al in Na OH solution when minor Mn is introduced. However, more Mn addition leads to the formation of Al_6Mn intermetallic,which has little effect on the weight loss, but accelerates the hydrogen evolution. Mn introduction plays a positive role in activating Al anodes, resulting in a decrease in the anodic polarization and an increase in the discharge voltage. Among all the commercial purity Al-x Mn anodes, 0.1 wt% Mn addition exhibits the best discharge efficiency for Al-air battery.
文摘A novel type nano TiN/Ti composite grain refiner （TiN/Ti refiner） was prepared by high energy ball milling, and its effect on as-cast and hot-working microstructure of commercial purity aluminum （pure Al） was investigated. The results show that TiN/Ti refiner exhibits excellent grain refining performances on pure Al. With an addition of 0.2% TiN/Ti refiner, the average grain size of pure Al decreases to 82 μm, which is smaller than that of pure Ti and Al 5Ti 1B master alloy as refiners. The microstructure of weld joint of pure Al with 0.1% TiN/Ti refiner is fine equiaxed grains and the hardness of weld joint is higher than that of the base metal. For pure Al with 40% cold deformation and recrystallization at 250 °C for 1.0 h, the grains of the sample added 0.1% Ti powder have an obvious grain growth behavior. In contrast, oriented grains caused by deformation have been eliminated, and there is no obvious grain growth in pure Al refined with 0.1% TiN/Ti refiner, indicating that nano TiN in the refiner inhibits the growth of grain during recrystallization.
基金financially supported by the Institute of Metallurgy and Materials Science of the Polish Academy of Sciences within the statutory work Z-4/2021partly supported by the EU Project POWR.03.02.00–00-I004/16。
文摘In this work,the microstructure of titania coating fabricated on the surface of hydrostatically extruded titanium grade 4 with the use of the micro-arc oxidation method was studied.The surface topography and microstructure investigations performed with atomic force microscopy and scanning and transmission electron microscopy revealed that,by using an Na_(2)HPO_(4)electrolyte,a well-adherent porous coating is produced on the top surface and side walls of the extruded rod.The distribution of chemical elements was analyzed by using energy dispersive X-ray spectroscopy.The chemical elements dissolved in the electrolyte(Na,P and O)incorporated into the coating.Sodium locates preferentially in the outer part of the coating,while phosphorus and oxygen are distributed throughout the whole coating.The most relevant finding shows that a grain refinement caused by a hydrostatic extrusion provoked an increase in density of high-angle grain boundaries(HAGB),which in turn secured the formation of a continuous amorphous layer close to the substrate.The presence of this layer compensates for the effect of anisotropic substrate,producing a comparable and homogenous microstructure with a large number of micropores.
文摘Modifying effect and mechanism of trace rare earth on Fe(Si) rich impurity phases in commercial purity aluminum were studied with the aids of SEM, EDAX, TEM, etc. It is found that Ce rich mixed rare earth (RE) is an effective modifying agent, which makes the coarse Fe rich impurity phases transform into complex compounds of tiny, sphere/short stick form, thus improving mechanical properties of this material; its modifying mechanism is in that RE gathering in front of solid/liquid interface enters into the impurity phases, forming complex (AlFeSiRE) compounds; or is adsorbed in the impurity phases surface, impeding the growth of impurity phases; however, excessive RE will result in the increasing of RE compounds (secondary phases), and plasticity reduction of this material. Therefore, its addition amount should be less than 0 07% (mass fraction).
基金Project (51074033) supported by the National Natural Science Foundation of China
文摘For further knowledge about the refining performance of AlTiC master alloys, Al5.5Ti0.25C and Al6.5Ti0.5C master alloys containing high Ti and C content were prepared and used in grain refining experiments of 99.8% commercial pure aluminum(CPAl). Their performance was compared with two types of Al5Ti1B refiners whose performance was nowadays considered to be the best. These two types of master alloys show similar refining efficiency at the addition level of 0.2%. However, at the addition level of 0.5%, there still exists great performance difference between AlTiC and Al5TiB alloys in grain refinement of 99.98% and 99.995% high purity aluminum(HPAl). The growth of columnar grains is fully suppressed due to the refinement of AlTiC at the addition level of 0.5%. Also, at the same addition level, the grain refining experiments of Al3Ti0.15C and Al5Ti0.2C master alloys which have found initial commercial applications are conducted in the above-mentioned three types of pure aluminum. According to the experimental results, these two refiners of different compositions are both nonideal. The second phase particles extracted from each refiner were observed through TEM, while the nuclei of grains after grain refinement were observed through SEM. The results were analyzed through computation and comparison of the constitutional-supercooling parameter and the growth-restriction parameter whose values were determined by solute element in aluminum melt with different purity. Apparently, AlTiC master alloys with high content of Ti and C element have great refining potential.
