By overcoming fabrication limitations, we have successfully fabricated silica toroid microcavities with both large diameter(of 1.88 mm) and ultra-high-Q factor(of 3.3 × 10~8) for the first time, to the best of ou...By overcoming fabrication limitations, we have successfully fabricated silica toroid microcavities with both large diameter(of 1.88 mm) and ultra-high-Q factor(of 3.3 × 10~8) for the first time, to the best of our knowledge. By employing these resonators, we have further demonstrated low-threshold Kerr frequency combs on a silicon chip,which allow us to obtain a repetition rate as low as 36 GHz. Such a low repetition rate frequency comb can now bedirectly measured through a commercialized optical-electronic detector.展开更多
The results of an optoelectronic system—frequency-shifted feedback(FSF)laser experimental examination are presented.The considered FSF laser is seeded only with optical amplifer spontaneous emission(ASE)and operates ...The results of an optoelectronic system—frequency-shifted feedback(FSF)laser experimental examination are presented.The considered FSF laser is seeded only with optical amplifer spontaneous emission(ASE)and operates in the mode-locked regime,whereby the output radiation is sequence of short pulses with a repetition rate determined by the delay time in its optical feedback circuit.In the frequency domain,the spectrum of such a pulse sequence is an optical frequency comb(OFC).These OFCs we call initial.We consider the possibility of tunable acousto-optic(AO)dual and quad-comb frequency spacing downconversion in the FSF laser seeded with ASE and operating in the mode-locked regime.The examined system applies a single frequency shifting loop with single AO tunable flter as the frequency shifter that is fed with several radio frequency signals simultaneously.The initial OFCs with frequency spacing of about 6.5 MHz may be obtained in the wide spectral range and their width,envelope shape and position in the optical spectrum may be tuned.The dual-combs are obtained with a pair of initial OFCs aroused by two various ultrasound waves in the acousto-optic tunable flter(AOTF).The dual-combs frequency spacing is determined by the frequency diference of the signals applied to the AOTF piezoelectric transducer and can be tuned simply.The quad-combs are obtained with three initial OFCs,forming a pair of dual-combs,appearing when three ultrasound frequencies feed the AOTF transducer.The quad-combs frequency spacing is defned by the diference between the frequency spacing of dual-combs.Quad-combs with more than 5000 spectral lines and tunable frequency spacing are observed.The successive frequency downconversion gives the possibility to reduce the OFC frequency spacing form several MHz for initial OFC to tens of kHz for quad-combs.展开更多
Self-referencing turns pulsed laser systems into self-referenced frequency combs.Such frequency combs allow counting of optical frequencies and have a wide range of applications.The required optical bandwidth to imple...Self-referencing turns pulsed laser systems into self-referenced frequency combs.Such frequency combs allow counting of optical frequencies and have a wide range of applications.The required optical bandwidth to implement self-referencing is typically obtained via nonlinear broadening in optical fibers.Recent advances in the field of Kerr frequency combs have provided a path toward the development of compact frequency comb sources that provide broadband frequency combs,exhibit microwave repetition rates and are compatible with on-chip photonic integration.These devices have the potential to significantly expand the use of frequency combs.Yet to date,self-referencing of such Kerr frequency combs has only been attained by applying conventional,fiber-based broadening techniques.Here we demonstrate external broadening-free self-referencing of a Kerr frequency comb.An optical spectrum spanning two-thirds of an octave is directly synthesized from a continuous wave laser-driven silicon nitride microresonator using temporal dissipative Kerr soliton formation and soliton Cherenkov radiation.Using this coherent bandwidth and two continuous wave transfer lasers in a 2f–3f self-referencing scheme,we are able to detect the offset frequency of the soliton Kerr frequency comb.By stabilizing the repetition rate to a radio frequency reference,the self-referenced frequency comb is used to count and track the continuous wave pump laser’s frequency.This work demonstrates the principal ability of soliton Kerr frequency combs to provide microwave-to-optical clockworks on a chip.展开更多
Based on a semiconductor laser （SL） with incoherent optical feedback, a novel all-optical scheme for generating tunable and broadband microwave frequency combs （MFCs） is proposed and investigated numerically. The ...Based on a semiconductor laser （SL） with incoherent optical feedback, a novel all-optical scheme for generating tunable and broadband microwave frequency combs （MFCs） is proposed and investigated numerically. The results show that, under suitable operation parameters, the SL with incoherent optical feedback can be driven to operate at a regular pulsing state, and the generated MFCs have bandwidths broader than 40 GHz within a 10 dB amplitude variation. For a fixed bias current, the line spacing （or repetition frequency） of the MFCs can be easily tuned by varying the feedback delay time and the feedback strength, and the tuning range of the line spacing increases with the increase in the bias current. The linewidth of the MFCs is sensitive to the variation of the feedback delay time and the feedback strength, and a linewidth of tens of KHz can be achieved through finely adjusting the feedback delay time and the feedback strength. In addition, mappings of amplitude variation, repetition frequency, and linewidth of MFCs in the parameter space of the feedback delay time and the feedback strength are presented.展开更多
Optical spectral measurements are crucial for optical sensors and many other applications,but the prevailing methods,such as optical spectrum analysis and tunable laser spectroscopy,often have to make compromises amon...Optical spectral measurements are crucial for optical sensors and many other applications,but the prevailing methods,such as optical spectrum analysis and tunable laser spectroscopy,often have to make compromises among resolution,speed,and accuracy.Optical frequency combs are widely used for metrology of discrete atomic and molecular spectral lines.However,they are usually generated by optical methods and have large comb spacing,which limits the resolution for direct sampling of continuous spectra.To overcome these problems,this paper presents an original method to digitally generate an ultrafine optical frequency comb(UFOFC)as the frequency ruler for spectral measurements.Each comb line provides one sampling point,and the full spectrum can be captured at the same time using coherent detection.For an experimental demonstration,we adopted the inverse fast Fourier transform to generate a UFOFC with a comb spacing of 1.46 MHz over a 10-GHz range and demonstrated its functions using a Mach–Zehnder refractive index sensor.The UFOFC obtains a spectral resolution of 0.01 pm and response time of 0.7 μs;both represent 100-fold improvements over the state of the art and could be further enhanced by several orders of magnitude.The UFOFC presented here could facilitate new label-free sensor applications that require both high resolution and fast speed,such as measuring binding kinetics and single-molecule dynamics.展开更多
Lightweight structures are widely used across different industry sectors.However,they get easily excited by external influences,such as vibrations.Undesired high vibration amplitudes can be avoided by shifting the str...Lightweight structures are widely used across different industry sectors.However,they get easily excited by external influences,such as vibrations.Undesired high vibration amplitudes can be avoided by shifting the structural eigenfrequencies,which can be achieved adapting the structural design considering optimisation procedures and structures primarily inspired by diatoms.This procedures has been applied to the development process of a girder structure installed in a synchrotron radiation facility to support heavy magnets and other components.The objective was to design a 2.9 m long girder structure with high eigenfrequencies,a high stiffness and a low mass.Based on a topology optimisation result,a parametric beam–shell model including biologically inspired structures(e.g.,Voronoi combs,ribs,and soft and organic-looking transitions)was built up.The subsequent cross-sectional optimisation using evolutionary strategic optimisation revealed an optimum girder structure,which was successfully manufactured using the casting technology.Eigenfrequency measurements validated the numerical models.Future changes in the specifications can be implemented in the bio-inspired development process to obtain adapted girder structures.展开更多
A magnonic counterpart to optical frequency combs is vital for high-precision magnonic frequency metrology and spectroscopy.Here,we present an efficient mechanism for the generation of robust magnonic frequency combs ...A magnonic counterpart to optical frequency combs is vital for high-precision magnonic frequency metrology and spectroscopy.Here,we present an efficient mechanism for the generation of robust magnonic frequency combs in a yttrium iron garnet(YIG)sphere via magnetostrictive effects.We show that magnonic and vibrational dynamics in the ferrimagnetic sphere can be substantively modified in the presence of magnetostrictive effects,which results in degenerate and non-degenerate magnonic four-wave mixing and frequency conversion.Particularly,resonantly enhanced magnetostrictive effects can induce phonon laser action above a threshold,which leads to significant magnonic nonlinearity and enables a potentially practical scheme for the generation of robust magnonic frequency combs.Numerical calculations of both magnonic and phononic dynamics show excellent agreement with this theory.These results deepen our understanding of magnetostrictive interaction,open a novel and efficient pathway to realize magnonic frequency conversion and mixing in a magnonic device,and provide a sensitive tool for precision measurement.展开更多
Based on the nonlinear Schr?dinger equation(NLSE) with damping, detuning, and driving terms describing the evolution of signals in a Kerr microresonator, we apply periodic nonlinear Fourier transform(NFT) to the study...Based on the nonlinear Schr?dinger equation(NLSE) with damping, detuning, and driving terms describing the evolution of signals in a Kerr microresonator, we apply periodic nonlinear Fourier transform(NFT) to the study of signals during the generation of the Kerr optical frequency combs(OFCs). We find that the signals in different states, including the Turing pattern, the chaos, the single soliton state, and the multi-solitons state, can be distinguished according to different distributions of the eigenvalue spectrum. Specially, the eigenvalue spectrum of the single soliton pulse is composed of a pair of conjugate symmetric discrete eigenvalues and the quasi-continuous eigenvalue spectrum with eye-like structure.Moreover, we have successfully demonstrated that the number of discrete eigenvalue pairs in the eigenvalue spectrum corresponds to the number of solitons formed in a round-trip time inside the Kerr microresonator. This work shows that some characteristics of the time-domain signal can be well reflected in the nonlinear domain.展开更多
We present our state-of-the-art version of a frequency comb for calibration of astronomical spectrographs. The mode spacing of the frequency comb can be designed to match the resolution of a spectrograph. Combined wit...We present our state-of-the-art version of a frequency comb for calibration of astronomical spectrographs. The mode spacing of the frequency comb can be designed to match the resolution of a spectrograph. Combined with its excellent accuracy and stability, the spectral coverage of more than 70% of the whole visible spectrum range makes the frequency comb an ideal calibration source. In addition, the new version introduces the automatic start-up function that brings convenience to the astronomers.展开更多
A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simult...A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization rates in several columns (matrix) of test tubes, enabling fast studies of obtaining crystals. This low-budget, portable device (i.e. adjustable airstream with more simple control options), can also be applied in tube and chamber furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.展开更多
Dual-pumped microring-resonator-based optical frequency combs(OFCs) and their temporal characteristics are numerically investigated and experimentally explored. The calculation results obtained by solving the driven a...Dual-pumped microring-resonator-based optical frequency combs(OFCs) and their temporal characteristics are numerically investigated and experimentally explored. The calculation results obtained by solving the driven and damped nonlinear Schr?dinger equation indicate that an ultralow coupled pump power is required to excite the primary comb modes through a non-degenerate four-wave-mixing(FWM) process and, when the pump power is boosted, both the comb mode intensities and spectral bandwidths increase. At low pump powers, the field intensity profile exhibits a cosine variation manner with frequency equal to the separation of the two pumps, while a roll Turing pattern is formed resulting from the increased comb mode intensities and spectral bandwidths at high pump powers. Meanwhile, we found that the power difference between the two pump fields can be transferred to the newly generated comb modes, which are located on both sides of the pump modes, through a cascaded FWM process. Experimentally, the dual-pumped OFCs were realized by coupling two self-oscillating pump fields into a microring resonator. The numerically calculated comb spectrum is verified by generating an OFC with 2.0 THz mode spacing over 160 nm bandwidth. In addition, the formation of a roll Turing pattern at high pump powers is inferred from the measured autocorrelation trace of a 10 free spectral range(FSR) OFC. The experimental observations accord well with the numerical predictions. Due to their large and tunable mode spacing, robustness,and flexibility, the proposed dual-pumped OFCs could find potential applications in a wide range of fields,including arbitrary optical waveform generation, high-capacity optical communications, and signal-processing systems.展开更多
The calcium fluoride(CaF_(2))whispering gallery mode crystalline resonator is an excellent platform for nonlinear optical applications because of the decreasing in threshold caused by ultrahigh quality(Q)factor.In thi...The calcium fluoride(CaF_(2))whispering gallery mode crystalline resonator is an excellent platform for nonlinear optical applications because of the decreasing in threshold caused by ultrahigh quality(Q)factor.In this paper,we achieved the observation of Raman lasing,first-order Raman comb,and second-order Raman lasing in a CaF_(2)disk resonator with a diameter of 4.96 mm and an ultrahigh-Q of 8.43×10^(8)at 1550-nm wavelength.We also observed thermal effects in CaF_(2)disk resonator,and the threshold of thermo-optical oscillation is approximately coincident with Raman lasing,since the intracavity power increases rapidly when the power reaches the threshold,and higher input pump power results in longer thermal drift and higher Raman emission power.With a further increase in pump power,the optical frequency combs range is from 1520 nm to 1650 nm,with a wavelength interval of 4×FSR.It is a promising candidate for optical communication,biological environment monitoring,spectral analysis,and microwave signal sources.展开更多
The optical injection locking of semiconductor lasers to dual-frequency lasers is studied by numerical simulations.The beat-note signals can be effectively transformed to optical frequency combs due to the effective f...The optical injection locking of semiconductor lasers to dual-frequency lasers is studied by numerical simulations.The beat-note signals can be effectively transformed to optical frequency combs due to the effective four wave-mixing in the active semiconductor gain medium. The low-noise Gaussian-like pulse can be obtained by locking the relaxation oscillation and compensating the gain asymmetry. The simulations suggest that pulse trains of width below 30 ps and repetition rate in GHz frequency can be generated simply by the optical injection locking of semiconductor lasers. Since the optical injection locking can broaden the spectrum and amplify the optical power simultaneously, it can be a good initial stage for generating optical frequency combs from dual-frequency lasers by multi-stage of spectral broadening in nonlinear waveguides.展开更多
Semiconductor mode-locked lasers(MLLs)can provide coherent optical frequency combs(OFCs)with high repetition rates and output power,which have been recognized as potential multi-wavelength sources used in optical comm...Semiconductor mode-locked lasers(MLLs)can provide coherent optical frequency combs(OFCs)with high repetition rates and output power,which have been recognized as potential multi-wavelength sources used in optical communication field due to their compactness,high-efficiency,and low-cost properties.In this article,we have reviewed recent development of semiconductor MLL-based frequency comb generation.Different approaches of semiconductor MLLs for OFC generation are synoptically summarized based on various material platforms.The representative progress of III-V semiconductor MLLs on III-V platform and especially on Si substrates is both discussed for the applications in integrated silicon photonics.展开更多
Optical frequency combs, which are generated by the cascade of a phase modulator and a Mach–Zehnder intensity modulator, are used as a polychromatic signal source in the terahertz imaging system to improve imaging qu...Optical frequency combs, which are generated by the cascade of a phase modulator and a Mach–Zehnder intensity modulator, are used as a polychromatic signal source in the terahertz imaging system to improve imaging quality. The interference effect caused by the monochromatic wave has been greatly suppressed.The required optical power in the presented system is as low as～30% of that in the system using the Er-doped fiber amplifier as a source, which can reduce cost and protect photodiodes from damage. This work provides an effective, low power consumption, low cost, and easy way to realize terahertz imaging with high quality and can be used in future security inspections.展开更多
Frequency combs[1, 2] consisting of equally-spaced frequencylines can be fully described by two frequencies, i.e., carrieroffset (fCEO) and repetition rate (frep). Once the two frequenciesare stabilized, the frequency...Frequency combs[1, 2] consisting of equally-spaced frequencylines can be fully described by two frequencies, i.e., carrieroffset (fCEO) and repetition rate (frep). Once the two frequenciesare stabilized, the frequency comb is well defined. Frequencycombs can be used for various applications, i.e., metrology,spectroscopy, timing, communications, absolute distancemeasurements, and so on, due to their two importantcharacteristics, i.e., stabilized frequency lines and ultra-shortoptical pulses (if the mode-locking is obtained) as shown inFig. 1.展开更多
Octave-spanning frequency comb generation in microresonators is promising, but strong spectral losses caused by material absorption and mode coupling between two polarizations or mode families can be detrimental. We e...Octave-spanning frequency comb generation in microresonators is promising, but strong spectral losses caused by material absorption and mode coupling between two polarizations or mode families can be detrimental. We examine the impact of the spectral loss and propose robust comb generation with a loss of even 300 dB/cm.Cavity nonlinear dynamics show that a phase change associated with spectral losses can facilitate phase matching and Kerr comb generation. Given this unique capability, we propose a novel architecture of on-chip spectroscopy systems.展开更多
基金National Key R&D Program of China(2017YFA0303703,2016YFA0302500)National Natural Science Foundation of China(NSFC)(61435007,11574144,61475099)+1 种基金Natural Science Foundation of Jiangsu Province,China(BK20150015)Fundamental Research Funds for the Central Universities(021314380086)
文摘By overcoming fabrication limitations, we have successfully fabricated silica toroid microcavities with both large diameter(of 1.88 mm) and ultra-high-Q factor(of 3.3 × 10~8) for the first time, to the best of our knowledge. By employing these resonators, we have further demonstrated low-threshold Kerr frequency combs on a silicon chip,which allow us to obtain a repetition rate as low as 36 GHz. Such a low repetition rate frequency comb can now bedirectly measured through a commercialized optical-electronic detector.
基金Russian Science Foundation.Sections 1,2,and 3.3 were supported by Grant 23-12-00057,Sects.3.1 and 3.2 were supported by Grant 20-12-00344.
文摘The results of an optoelectronic system—frequency-shifted feedback(FSF)laser experimental examination are presented.The considered FSF laser is seeded only with optical amplifer spontaneous emission(ASE)and operates in the mode-locked regime,whereby the output radiation is sequence of short pulses with a repetition rate determined by the delay time in its optical feedback circuit.In the frequency domain,the spectrum of such a pulse sequence is an optical frequency comb(OFC).These OFCs we call initial.We consider the possibility of tunable acousto-optic(AO)dual and quad-comb frequency spacing downconversion in the FSF laser seeded with ASE and operating in the mode-locked regime.The examined system applies a single frequency shifting loop with single AO tunable flter as the frequency shifter that is fed with several radio frequency signals simultaneously.The initial OFCs with frequency spacing of about 6.5 MHz may be obtained in the wide spectral range and their width,envelope shape and position in the optical spectrum may be tuned.The dual-combs are obtained with a pair of initial OFCs aroused by two various ultrasound waves in the acousto-optic tunable flter(AOTF).The dual-combs frequency spacing is determined by the frequency diference of the signals applied to the AOTF piezoelectric transducer and can be tuned simply.The quad-combs are obtained with three initial OFCs,forming a pair of dual-combs,appearing when three ultrasound frequencies feed the AOTF transducer.The quad-combs frequency spacing is defned by the diference between the frequency spacing of dual-combs.Quad-combs with more than 5000 spectral lines and tunable frequency spacing are observed.The successive frequency downconversion gives the possibility to reduce the OFC frequency spacing form several MHz for initial OFC to tens of kHz for quad-combs.
基金supported by the European Space Agency(ESA)contract ESTEC CN 4000108280/12/NL/PAthe Defense Advanced Research Projects Agency(DARPA)contract W911NF-11-1-0202(QuASAR)+4 种基金the Swiss National Science Foundationsupported by the Air Force Office of Scientific Research,Air Force Material Command,under award FA9550-15-1-0099support from the ESA via contract ESTEC CN 4000105962/12/NL/PAsupport by the Marie Curie IIF Fellowshipsupport from the Hasler foundation and support from the‘EPFL Fellows’fellowship program co-funded by Marie Curie,FP7 Grant agreement no.291771。
文摘Self-referencing turns pulsed laser systems into self-referenced frequency combs.Such frequency combs allow counting of optical frequencies and have a wide range of applications.The required optical bandwidth to implement self-referencing is typically obtained via nonlinear broadening in optical fibers.Recent advances in the field of Kerr frequency combs have provided a path toward the development of compact frequency comb sources that provide broadband frequency combs,exhibit microwave repetition rates and are compatible with on-chip photonic integration.These devices have the potential to significantly expand the use of frequency combs.Yet to date,self-referencing of such Kerr frequency combs has only been attained by applying conventional,fiber-based broadening techniques.Here we demonstrate external broadening-free self-referencing of a Kerr frequency comb.An optical spectrum spanning two-thirds of an octave is directly synthesized from a continuous wave laser-driven silicon nitride microresonator using temporal dissipative Kerr soliton formation and soliton Cherenkov radiation.Using this coherent bandwidth and two continuous wave transfer lasers in a 2f–3f self-referencing scheme,we are able to detect the offset frequency of the soliton Kerr frequency comb.By stabilizing the repetition rate to a radio frequency reference,the self-referenced frequency comb is used to count and track the continuous wave pump laser’s frequency.This work demonstrates the principal ability of soliton Kerr frequency combs to provide microwave-to-optical clockworks on a chip.
基金supported by the National Natural Science Foundation of China(Grant Nos.61178011,11204248,61475127,and 61275116)the Natural Science Foundation of Chongqing City,China(Grant Nos.2012jj B40011 and 2012jj A40012)the Open Fund of the State Key Lab of Millimeter Waves of China(Grant No.K201418)
文摘Based on a semiconductor laser （SL） with incoherent optical feedback, a novel all-optical scheme for generating tunable and broadband microwave frequency combs （MFCs） is proposed and investigated numerically. The results show that, under suitable operation parameters, the SL with incoherent optical feedback can be driven to operate at a regular pulsing state, and the generated MFCs have bandwidths broader than 40 GHz within a 10 dB amplitude variation. For a fixed bias current, the line spacing （or repetition frequency） of the MFCs can be easily tuned by varying the feedback delay time and the feedback strength, and the tuning range of the line spacing increases with the increase in the bias current. The linewidth of the MFCs is sensitive to the variation of the feedback delay time and the feedback strength, and a linewidth of tens of KHz can be achieved through finely adjusting the feedback delay time and the feedback strength. In addition, mappings of amplitude variation, repetition frequency, and linewidth of MFCs in the parameter space of the feedback delay time and the feedback strength are presented.
基金Zhaohui Li acknowledges the support of the National Basic Research Programme of China(973)(Project No.2012CB315603)National High Technology 863 Research and Development Program of China(Nos.2013AA013300 and 2013AA013403)+5 种基金the Research Fund for the Doctoral Program of Higher Education of China(20124401110003)National Natural Science Foundation of China(NSFC)(Grant No.61435006)the Program for New Century Excellent Talents in University(NCET-12-0679)in ChinaXuming Zhang acknowledges the NSFC(Grant No.61377068)the Hong Kong Research Grant Council(Grant Nos.PolyU 5327/11E and N_PolyU505/13)the Hong Kong Polytechnic University(Grant Nos.G-YN07,4-BCAL and G-YBBE).
文摘Optical spectral measurements are crucial for optical sensors and many other applications,but the prevailing methods,such as optical spectrum analysis and tunable laser spectroscopy,often have to make compromises among resolution,speed,and accuracy.Optical frequency combs are widely used for metrology of discrete atomic and molecular spectral lines.However,they are usually generated by optical methods and have large comb spacing,which limits the resolution for direct sampling of continuous spectra.To overcome these problems,this paper presents an original method to digitally generate an ultrafine optical frequency comb(UFOFC)as the frequency ruler for spectral measurements.Each comb line provides one sampling point,and the full spectrum can be captured at the same time using coherent detection.For an experimental demonstration,we adopted the inverse fast Fourier transform to generate a UFOFC with a comb spacing of 1.46 MHz over a 10-GHz range and demonstrated its functions using a Mach–Zehnder refractive index sensor.The UFOFC obtains a spectral resolution of 0.01 pm and response time of 0.7 μs;both represent 100-fold improvements over the state of the art and could be further enhanced by several orders of magnitude.The UFOFC presented here could facilitate new label-free sensor applications that require both high resolution and fast speed,such as measuring binding kinetics and single-molecule dynamics.
基金This study was financially supported by the Innovationsfonds from the Alfred Wegener Institute,Helmholtz Centre for Polar andMarine Research(AWI)and by the Deutsches Elektronen-Synchrotron(DESY),a research centre of the Helmholtz Association,christian.hamm@awi.de。
文摘Lightweight structures are widely used across different industry sectors.However,they get easily excited by external influences,such as vibrations.Undesired high vibration amplitudes can be avoided by shifting the structural eigenfrequencies,which can be achieved adapting the structural design considering optimisation procedures and structures primarily inspired by diatoms.This procedures has been applied to the development process of a girder structure installed in a synchrotron radiation facility to support heavy magnets and other components.The objective was to design a 2.9 m long girder structure with high eigenfrequencies,a high stiffness and a low mass.Based on a topology optimisation result,a parametric beam–shell model including biologically inspired structures(e.g.,Voronoi combs,ribs,and soft and organic-looking transitions)was built up.The subsequent cross-sectional optimisation using evolutionary strategic optimisation revealed an optimum girder structure,which was successfully manufactured using the casting technology.Eigenfrequency measurements validated the numerical models.Future changes in the specifications can be implemented in the bio-inspired development process to obtain adapted girder structures.
文摘A magnonic counterpart to optical frequency combs is vital for high-precision magnonic frequency metrology and spectroscopy.Here,we present an efficient mechanism for the generation of robust magnonic frequency combs in a yttrium iron garnet(YIG)sphere via magnetostrictive effects.We show that magnonic and vibrational dynamics in the ferrimagnetic sphere can be substantively modified in the presence of magnetostrictive effects,which results in degenerate and non-degenerate magnonic four-wave mixing and frequency conversion.Particularly,resonantly enhanced magnetostrictive effects can induce phonon laser action above a threshold,which leads to significant magnonic nonlinearity and enables a potentially practical scheme for the generation of robust magnonic frequency combs.Numerical calculations of both magnonic and phononic dynamics show excellent agreement with this theory.These results deepen our understanding of magnetostrictive interaction,open a novel and efficient pathway to realize magnonic frequency conversion and mixing in a magnonic device,and provide a sensitive tool for precision measurement.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61475099 and 61922040)Program of State Key Laboratory of Quantum Optics and Quantum Optics Devices,China(Grant No.KF201701)the Key R&D Program of Guangdong Province,China(Grant No.2018B030325002)。
文摘Based on the nonlinear Schr?dinger equation(NLSE) with damping, detuning, and driving terms describing the evolution of signals in a Kerr microresonator, we apply periodic nonlinear Fourier transform(NFT) to the study of signals during the generation of the Kerr optical frequency combs(OFCs). We find that the signals in different states, including the Turing pattern, the chaos, the single soliton state, and the multi-solitons state, can be distinguished according to different distributions of the eigenvalue spectrum. Specially, the eigenvalue spectrum of the single soliton pulse is composed of a pair of conjugate symmetric discrete eigenvalues and the quasi-continuous eigenvalue spectrum with eye-like structure.Moreover, we have successfully demonstrated that the number of discrete eigenvalue pairs in the eigenvalue spectrum corresponds to the number of solitons formed in a round-trip time inside the Kerr microresonator. This work shows that some characteristics of the time-domain signal can be well reflected in the nonlinear domain.
文摘We present our state-of-the-art version of a frequency comb for calibration of astronomical spectrographs. The mode spacing of the frequency comb can be designed to match the resolution of a spectrograph. Combined with its excellent accuracy and stability, the spectral coverage of more than 70% of the whole visible spectrum range makes the frequency comb an ideal calibration source. In addition, the new version introduces the automatic start-up function that brings convenience to the astronomers.
文摘A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization rates in several columns (matrix) of test tubes, enabling fast studies of obtaining crystals. This low-budget, portable device (i.e. adjustable airstream with more simple control options), can also be applied in tube and chamber furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.
基金Strategic Priority Research Program of the Chinese Academy of Sciences(CAS)(XDB 24030600)National Key Research and Development Program of China(2016YFF0200702)+1 种基金National Natural Science Foundation of China(NSFC)(61690222,61308037,61635013)CASSAFEA International Partnership Program for Creative Research Teams
文摘Dual-pumped microring-resonator-based optical frequency combs(OFCs) and their temporal characteristics are numerically investigated and experimentally explored. The calculation results obtained by solving the driven and damped nonlinear Schr?dinger equation indicate that an ultralow coupled pump power is required to excite the primary comb modes through a non-degenerate four-wave-mixing(FWM) process and, when the pump power is boosted, both the comb mode intensities and spectral bandwidths increase. At low pump powers, the field intensity profile exhibits a cosine variation manner with frequency equal to the separation of the two pumps, while a roll Turing pattern is formed resulting from the increased comb mode intensities and spectral bandwidths at high pump powers. Meanwhile, we found that the power difference between the two pump fields can be transferred to the newly generated comb modes, which are located on both sides of the pump modes, through a cascaded FWM process. Experimentally, the dual-pumped OFCs were realized by coupling two self-oscillating pump fields into a microring resonator. The numerically calculated comb spectrum is verified by generating an OFC with 2.0 THz mode spacing over 160 nm bandwidth. In addition, the formation of a roll Turing pattern at high pump powers is inferred from the measured autocorrelation trace of a 10 free spectral range(FSR) OFC. The experimental observations accord well with the numerical predictions. Due to their large and tunable mode spacing, robustness,and flexibility, the proposed dual-pumped OFCs could find potential applications in a wide range of fields,including arbitrary optical waveform generation, high-capacity optical communications, and signal-processing systems.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51727808,51922009,52005457,and 62004179)the Fund from the Key Laboratory of Quantum Sensing and Precision Measurement of Shanxi Province,China(Grant No.201905D121001)。
文摘The calcium fluoride(CaF_(2))whispering gallery mode crystalline resonator is an excellent platform for nonlinear optical applications because of the decreasing in threshold caused by ultrahigh quality(Q)factor.In this paper,we achieved the observation of Raman lasing,first-order Raman comb,and second-order Raman lasing in a CaF_(2)disk resonator with a diameter of 4.96 mm and an ultrahigh-Q of 8.43×10^(8)at 1550-nm wavelength.We also observed thermal effects in CaF_(2)disk resonator,and the threshold of thermo-optical oscillation is approximately coincident with Raman lasing,since the intracavity power increases rapidly when the power reaches the threshold,and higher input pump power results in longer thermal drift and higher Raman emission power.With a further increase in pump power,the optical frequency combs range is from 1520 nm to 1650 nm,with a wavelength interval of 4×FSR.It is a promising candidate for optical communication,biological environment monitoring,spectral analysis,and microwave signal sources.
基金Project supported by the National Natural Science Foundation of China(Grant No.62005215)。
文摘The optical injection locking of semiconductor lasers to dual-frequency lasers is studied by numerical simulations.The beat-note signals can be effectively transformed to optical frequency combs due to the effective four wave-mixing in the active semiconductor gain medium. The low-noise Gaussian-like pulse can be obtained by locking the relaxation oscillation and compensating the gain asymmetry. The simulations suggest that pulse trains of width below 30 ps and repetition rate in GHz frequency can be generated simply by the optical injection locking of semiconductor lasers. Since the optical injection locking can broaden the spectrum and amplify the optical power simultaneously, it can be a good initial stage for generating optical frequency combs from dual-frequency lasers by multi-stage of spectral broadening in nonlinear waveguides.
基金supported by the National Natural Science Foundation of China(61975230 and 62008308)the National Key Research and Development Program of China(2021YFB2800400)Ting Wang was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2018011)。
文摘Semiconductor mode-locked lasers(MLLs)can provide coherent optical frequency combs(OFCs)with high repetition rates and output power,which have been recognized as potential multi-wavelength sources used in optical communication field due to their compactness,high-efficiency,and low-cost properties.In this article,we have reviewed recent development of semiconductor MLL-based frequency comb generation.Different approaches of semiconductor MLLs for OFC generation are synoptically summarized based on various material platforms.The representative progress of III-V semiconductor MLLs on III-V platform and especially on Si substrates is both discussed for the applications in integrated silicon photonics.
基金supported by the 973 Program of China(No.2014CB339803)the National Natural Science Foundation of China(Nos.61574155 and 61404149)+2 种基金the Major National Development Project of Scientific Instrument and Equipment(No.2011YQ150021)the National Science and Technology Major Project(No.2011ZX02707)the Shanghai Municipal Commission of Science and Technology(Nos.14530711300,15560722000,14ZR1447500,15YF1414400,15JC1403800,and 15DZ0500103)
文摘Optical frequency combs, which are generated by the cascade of a phase modulator and a Mach–Zehnder intensity modulator, are used as a polychromatic signal source in the terahertz imaging system to improve imaging quality. The interference effect caused by the monochromatic wave has been greatly suppressed.The required optical power in the presented system is as low as～30% of that in the system using the Er-doped fiber amplifier as a source, which can reduce cost and protect photodiodes from damage. This work provides an effective, low power consumption, low cost, and easy way to realize terahertz imaging with high quality and can be used in future security inspections.
基金supported by the "Hundred-Talent" Program of Chinese Academy of Sciencesthe National Natural Science Foundation of China(61875220,61575214,61404150,61405233,and 61704181)+1 种基金the National Key R&D Program of China(2017YFF0106302 and 2017YFA0701005)Shanghai Municipal Commission of Science and Technology(17YF1430000)
文摘Frequency combs[1, 2] consisting of equally-spaced frequencylines can be fully described by two frequencies, i.e., carrieroffset (fCEO) and repetition rate (frep). Once the two frequenciesare stabilized, the frequency comb is well defined. Frequencycombs can be used for various applications, i.e., metrology,spectroscopy, timing, communications, absolute distancemeasurements, and so on, due to their two importantcharacteristics, i.e., stabilized frequency lines and ultra-shortoptical pulses (if the mode-locking is obtained) as shown inFig. 1.
基金National Basic Research Program of China(973)(2014CB340104/3,61775164,61335005,61377076,61575142,61431009)Advanced Integrated Optoelectronics Facility at the Tianjin University
文摘Octave-spanning frequency comb generation in microresonators is promising, but strong spectral losses caused by material absorption and mode coupling between two polarizations or mode families can be detrimental. We examine the impact of the spectral loss and propose robust comb generation with a loss of even 300 dB/cm.Cavity nonlinear dynamics show that a phase change associated with spectral losses can facilitate phase matching and Kerr comb generation. Given this unique capability, we propose a novel architecture of on-chip spectroscopy systems.
