Recovery of waste heat from boiler flue gas is an effective way to improve energy utilization efficiency.Taking a heating station heating project as an example,the existing heating system of this heating station was a...Recovery of waste heat from boiler flue gas is an effective way to improve energy utilization efficiency.Taking a heating station heating project as an example,the existing heating system of this heating station was analyzed for its underutilized flue gas waste heat and low energy utilization rate.Rankine cycle is an effective waste heat recovery method,and a steam boiler organic Rankine cycle(ORC)cogeneration waste heat utilization method is proposed.The system model simulation is constructed and verified.First,a thermodynamic model was constructed in MATLAB and five suitable work gases were selected to analyze the effects of evaporation temperature and condensation temperature on the network and thermal efficiency of the waste heat cycle power system.Secondly,the ORC model is invoked in TRNSYS to construct the improved cogeneration system,and the rationality of the remaining heat utilization methods is determined by calculating and analyzing the thermal performance,economy,and environmental protection of the improved system.The simulation results show that the system can generate about 552,000 kWh of electricity per year,and improving the energy utilization rate from 0.72 to 0.78.展开更多
Industrial applications that require steam for their end-use generally utilize steam boilers that are typically oversized,citing operations flexibility.Similarly,gas turbine-based power plants corroborate a gas turbin...Industrial applications that require steam for their end-use generally utilize steam boilers that are typically oversized,citing operations flexibility.Similarly,gas turbine-based power plants corroborate a gas turbine system that may eventually relieve the usable exhaust into the atmosphere.This study explores the economic and technical feasibility of a topping cycle combined heat and power(CHP)system.It does so by leveraging a partially loaded boiler or gas turbine by increasing its unused load to generate steam and heat for subsequent usage.To this end,a decision support tool(COGENTEC)was developed,which emulates a given facility’s boiler or gas-turbine system,and its operational parameters with the application of steam turbines.The tool provides necessary insights into the most appropriate parameters that enable a CHP system to be technically and economically advantageous.Based on input variables such as boiler-rated capacity,steam pressure,steam temperature,and existing boiler load,among others,COGENTEC designs a topping cycle CHP system to inform a user whether this system is feasible in their facility or not.If applicable,the tool assists the user to realize the point of break-even(fuel cost incurred and cost savings)at the desired steam flow rate.It also conducts sensitivity analyses between energy usage,cost savings,and payback on the investment of the operating parameters to understand the relationship between relevant variables.By utilizing parameters from a pulp and paper manufacturing facility,the research determines that the fuel cost,electricity cost,and steam flow rate are the most important parameters for the feasibility of the system with a desirable payback on the investment.展开更多
Waste heat recovery(WHR)is one of the most useful ways to improve the efficiency of internal combustion engines,and an electricity-cooling cogeneration system(ECCS)based on Rankin-absorption refrigeration combined cyc...Waste heat recovery(WHR)is one of the most useful ways to improve the efficiency of internal combustion engines,and an electricity-cooling cogeneration system(ECCS)based on Rankin-absorption refrigeration combined cycle for the WHR of gaseous fuel engines is proposed in the paper.This system can avoid wasting the heat in condenser so that the efficiency of the whole WHR system improves,but the condensing temperature of Rankin cycle(RC)must increase in order to use absorption refrigeration system,which leads to the decrease of RC output power.Therefore,the relationship between the profit of absorption refrigeration system and the loss of RC in this combined system is the mainly studied content in the paper.Because the energy quality of cooling and electricity are different,cooling power in absorption refrigeration is converted to corresponding electrical power consumed by electric cooling system,which is defined as equivalent electrical power.With this method,the effects of some important operation parameters on the performance of the ECCS are researched,and the equivalent efficiency,exergy efficiency and primary energy rate are compared in the paper.展开更多
A novel power and cooling cogeneration system which combines a supercritical CO_(2) recompression cycle(SCRC), an ammonia-water absorption refrigeration cycle(AARC) and a Kalina cycle(KC) is proposed and investigated ...A novel power and cooling cogeneration system which combines a supercritical CO_(2) recompression cycle(SCRC), an ammonia-water absorption refrigeration cycle(AARC) and a Kalina cycle(KC) is proposed and investigated for the recovery of medium-temperature waste heat. The system is based on energy cascade utilization, and the waste heat can be fully converted through the simultaneous operation of the three sub-cycles. A steady-state mathematical model is built for further performance study of the proposed system. When the exhaust temperature is 505℃, it is shown that under designed conditions the thermal efficiency and exergy efficiency reach 30.74% and 61.55%, respectively. The exergy analysis results show that the main exergy destruction is concentrated in the heat recovery vapor generator(HRVG). Parametric study shows that the compressor inlet pressure, the SCRC pressure ratio, the main compressor and the turbine I inlet temperature, and the AARC generator pressure have significant effects on thermodynamic and economic performance of the combined system. The findings in this study could provide guidance for system design to achieve an efficient utilization of medium-temperature waste heat(e.g., exhaust heat from gas turbine, high-temperature fuel cells and internal combustion engine).展开更多
In this paper,the operation perfonnance of three novel kinds of cogeneration systems under design and off-design condition was investigated.The systems are MGT(micro gas turbine)+ORC(organic Rankine cycle)for electric...In this paper,the operation perfonnance of three novel kinds of cogeneration systems under design and off-design condition was investigated.The systems are MGT(micro gas turbine)+ORC(organic Rankine cycle)for electricity demand,MGT+ERC(ejector refrigeration cycle)for electricity and cooling demand,and MGT+ORC+ERC for electricity and cooling demand.The effect of 5 different working fluids on cogeneration systems was studied.The results show that under the design condition,when using R600 in the bottoming cycle,the MGT+ORC system has the lowest total output of 117.1 kW with a thermal efficiency of 0.334,and the MGT+ERC system has the largest total output of 142.6 kW with a thermal efficiency of 0.408.For the MGT+ORC+ERC system,the total output is between the other two systems,which is 129.3 kW with a thermal efficiency of 0.370.For the effect of different working fluids,R123 is the most suitable working fluid for MGT+ORC with the maximum electricity output power and R600 is the most suitable working fluid for MGT+ERC with the maximum cooling capacity,while both R600 and R123 can make MGT+ORC+ERC achieve a good comprehensive performance of refrigeration and electricity.The thermal efficiency of three cogeneration systems can be effectively improved under oredesign condition because the bottoming cycle can compensate for the power decrease of MGT.The results obtained in this paper can provide a reference for the design and operation of the cogeneration system for distributed energy systems(DES).展开更多
基金supported by research funds from Shanghai’s 2020 Annual Science and Technology Innovation Action Plan:Social development and Science&Technology Project(No.20dz1205302).
文摘Recovery of waste heat from boiler flue gas is an effective way to improve energy utilization efficiency.Taking a heating station heating project as an example,the existing heating system of this heating station was analyzed for its underutilized flue gas waste heat and low energy utilization rate.Rankine cycle is an effective waste heat recovery method,and a steam boiler organic Rankine cycle(ORC)cogeneration waste heat utilization method is proposed.The system model simulation is constructed and verified.First,a thermodynamic model was constructed in MATLAB and five suitable work gases were selected to analyze the effects of evaporation temperature and condensation temperature on the network and thermal efficiency of the waste heat cycle power system.Secondly,the ORC model is invoked in TRNSYS to construct the improved cogeneration system,and the rationality of the remaining heat utilization methods is determined by calculating and analyzing the thermal performance,economy,and environmental protection of the improved system.The simulation results show that the system can generate about 552,000 kWh of electricity per year,and improving the energy utilization rate from 0.72 to 0.78.
基金funded in part by the IndustrialAssessmentCenter Project,supported by grants fromthe US Department of Energy and by theWest Virginia Development Office.
文摘Industrial applications that require steam for their end-use generally utilize steam boilers that are typically oversized,citing operations flexibility.Similarly,gas turbine-based power plants corroborate a gas turbine system that may eventually relieve the usable exhaust into the atmosphere.This study explores the economic and technical feasibility of a topping cycle combined heat and power(CHP)system.It does so by leveraging a partially loaded boiler or gas turbine by increasing its unused load to generate steam and heat for subsequent usage.To this end,a decision support tool(COGENTEC)was developed,which emulates a given facility’s boiler or gas-turbine system,and its operational parameters with the application of steam turbines.The tool provides necessary insights into the most appropriate parameters that enable a CHP system to be technically and economically advantageous.Based on input variables such as boiler-rated capacity,steam pressure,steam temperature,and existing boiler load,among others,COGENTEC designs a topping cycle CHP system to inform a user whether this system is feasible in their facility or not.If applicable,the tool assists the user to realize the point of break-even(fuel cost incurred and cost savings)at the desired steam flow rate.It also conducts sensitivity analyses between energy usage,cost savings,and payback on the investment of the operating parameters to understand the relationship between relevant variables.By utilizing parameters from a pulp and paper manufacturing facility,the research determines that the fuel cost,electricity cost,and steam flow rate are the most important parameters for the feasibility of the system with a desirable payback on the investment.
基金supported by the National Basic Research Program of China("973"Project)(Gran No.2011CB707201)
文摘Waste heat recovery(WHR)is one of the most useful ways to improve the efficiency of internal combustion engines,and an electricity-cooling cogeneration system(ECCS)based on Rankin-absorption refrigeration combined cycle for the WHR of gaseous fuel engines is proposed in the paper.This system can avoid wasting the heat in condenser so that the efficiency of the whole WHR system improves,but the condensing temperature of Rankin cycle(RC)must increase in order to use absorption refrigeration system,which leads to the decrease of RC output power.Therefore,the relationship between the profit of absorption refrigeration system and the loss of RC in this combined system is the mainly studied content in the paper.Because the energy quality of cooling and electricity are different,cooling power in absorption refrigeration is converted to corresponding electrical power consumed by electric cooling system,which is defined as equivalent electrical power.With this method,the effects of some important operation parameters on the performance of the ECCS are researched,and the equivalent efficiency,exergy efficiency and primary energy rate are compared in the paper.
基金supported by the Shandong Provincial Natural Science Foundation of China(No.ZR2019MEE045)the National Natural Science Foundation of China(No.51776203)the Key Project of National Natural Science Foundation of China(No.61733010)。
文摘A novel power and cooling cogeneration system which combines a supercritical CO_(2) recompression cycle(SCRC), an ammonia-water absorption refrigeration cycle(AARC) and a Kalina cycle(KC) is proposed and investigated for the recovery of medium-temperature waste heat. The system is based on energy cascade utilization, and the waste heat can be fully converted through the simultaneous operation of the three sub-cycles. A steady-state mathematical model is built for further performance study of the proposed system. When the exhaust temperature is 505℃, it is shown that under designed conditions the thermal efficiency and exergy efficiency reach 30.74% and 61.55%, respectively. The exergy analysis results show that the main exergy destruction is concentrated in the heat recovery vapor generator(HRVG). Parametric study shows that the compressor inlet pressure, the SCRC pressure ratio, the main compressor and the turbine I inlet temperature, and the AARC generator pressure have significant effects on thermodynamic and economic performance of the combined system. The findings in this study could provide guidance for system design to achieve an efficient utilization of medium-temperature waste heat(e.g., exhaust heat from gas turbine, high-temperature fuel cells and internal combustion engine).
文摘In this paper,the operation perfonnance of three novel kinds of cogeneration systems under design and off-design condition was investigated.The systems are MGT(micro gas turbine)+ORC(organic Rankine cycle)for electricity demand,MGT+ERC(ejector refrigeration cycle)for electricity and cooling demand,and MGT+ORC+ERC for electricity and cooling demand.The effect of 5 different working fluids on cogeneration systems was studied.The results show that under the design condition,when using R600 in the bottoming cycle,the MGT+ORC system has the lowest total output of 117.1 kW with a thermal efficiency of 0.334,and the MGT+ERC system has the largest total output of 142.6 kW with a thermal efficiency of 0.408.For the MGT+ORC+ERC system,the total output is between the other two systems,which is 129.3 kW with a thermal efficiency of 0.370.For the effect of different working fluids,R123 is the most suitable working fluid for MGT+ORC with the maximum electricity output power and R600 is the most suitable working fluid for MGT+ERC with the maximum cooling capacity,while both R600 and R123 can make MGT+ORC+ERC achieve a good comprehensive performance of refrigeration and electricity.The thermal efficiency of three cogeneration systems can be effectively improved under oredesign condition because the bottoming cycle can compensate for the power decrease of MGT.The results obtained in this paper can provide a reference for the design and operation of the cogeneration system for distributed energy systems(DES).
