The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in...The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in this research.The unconfined compression tests and one-dimensional oedometer swelling were performed after 7 d of curing to understand the influence of addition of 1%of RC material in the stabilised soils with the cement partially replaced by 49%,59%and 69%of ground granulated blast furnace slag(GBBS)or pulverised fuel ash(PFA).The moisture retention capacity of the stabilised clays was also explored using the soil-water retention curve(SWRC)from the measured suctions.Results confirmed an obvious effect of the use of RC with the obtained strength and swell properties of the stabilised clays suitable for road application at 50%replacement of cement.This outcome is associated with the in-depth and penetrating hydration of the cementitious materials by the RC and water which results in the production of needle-like matrix with interlocking filaments e a phenomenon referred to as the‘wrapping’effect.On the other hand,the SWRC used to describe the water holding capacity and corresponding swell mechanism of clays stabilised by a proportion of RC showed a satisfactory response.The moisture retention of the RC-modified clays was initially higher but reduced subsequently as the saturation level increased with decreasing suction.This phenomenon confirmed that clays stabilised by including the RC are water-proof in nature,thus ensuring reduced porosity and suction even at reduced water content.Overall,the stabilised clays with the combination of cement,GGBS and RC showed a better performance compared to those with the PFA included.展开更多
The partial substitution of clinker by mineral additions offers very significant, both economical and environmental benefits. This adds value to industrial waste, and contributes also in the preservation of natural re...The partial substitution of clinker by mineral additions offers very significant, both economical and environmental benefits. This adds value to industrial waste, and contributes also in the preservation of natural resources, like clay and limestone, as well as the reduction of greenhouse gas emissions （CO2）. This study is interested in the simultaneous effect of BFS （blast furnace slag） and SF （silica fume） on setting time and water requirement of cement paste. The volumetric variations are tested in mortars, prepared in the same mixture of pastes, and the tests indicate that the addition of slag increase the fluidity, reduce the water demand, shrinkage and expansion, compared to the mortar, containing ten percent （10%） of Silica Fume only. The images of pastes obtained by SEM （scanning electron microscopy）, are indicated an improvement of the microstructure of the paste with a large amount of slag, which leads to improve durability.展开更多
文摘The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in this research.The unconfined compression tests and one-dimensional oedometer swelling were performed after 7 d of curing to understand the influence of addition of 1%of RC material in the stabilised soils with the cement partially replaced by 49%,59%and 69%of ground granulated blast furnace slag(GBBS)or pulverised fuel ash(PFA).The moisture retention capacity of the stabilised clays was also explored using the soil-water retention curve(SWRC)from the measured suctions.Results confirmed an obvious effect of the use of RC with the obtained strength and swell properties of the stabilised clays suitable for road application at 50%replacement of cement.This outcome is associated with the in-depth and penetrating hydration of the cementitious materials by the RC and water which results in the production of needle-like matrix with interlocking filaments e a phenomenon referred to as the‘wrapping’effect.On the other hand,the SWRC used to describe the water holding capacity and corresponding swell mechanism of clays stabilised by a proportion of RC showed a satisfactory response.The moisture retention of the RC-modified clays was initially higher but reduced subsequently as the saturation level increased with decreasing suction.This phenomenon confirmed that clays stabilised by including the RC are water-proof in nature,thus ensuring reduced porosity and suction even at reduced water content.Overall,the stabilised clays with the combination of cement,GGBS and RC showed a better performance compared to those with the PFA included.
文摘The partial substitution of clinker by mineral additions offers very significant, both economical and environmental benefits. This adds value to industrial waste, and contributes also in the preservation of natural resources, like clay and limestone, as well as the reduction of greenhouse gas emissions （CO2）. This study is interested in the simultaneous effect of BFS （blast furnace slag） and SF （silica fume） on setting time and water requirement of cement paste. The volumetric variations are tested in mortars, prepared in the same mixture of pastes, and the tests indicate that the addition of slag increase the fluidity, reduce the water demand, shrinkage and expansion, compared to the mortar, containing ten percent （10%） of Silica Fume only. The images of pastes obtained by SEM （scanning electron microscopy）, are indicated an improvement of the microstructure of the paste with a large amount of slag, which leads to improve durability.
