Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, su...Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction （XRD）, high-resolution transmission electron microscope （HRTEM）, in situ Fourier transform infrared spectroscopy （in situ FT-IR） and temperature-programmed reduction （TPR） and their catalytic activities were evaluated with the selective catalytic reduction （SCR） of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window （below 120 ℃）. Among the tested catalysts, Mn-Fe- Cr （2 ： 2 ： 1） catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that （1） the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; （2） Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate （-NH3＋）, which favored the low-temperature SCR reaction.展开更多
Dual-atom catalysts(DACs) afford promising potential for oxygen reduction electrocatalysis due to their high atomic efficiency and high intrinsic activity.However,precise construction of dual-atom sites remains a chal...Dual-atom catalysts(DACs) afford promising potential for oxygen reduction electrocatalysis due to their high atomic efficiency and high intrinsic activity.However,precise construction of dual-atom sites remains a challenge.In this work,a post-modification strategy is proposed to precisely fabricate DACs for oxygen reduction electrocatalysis.Concretely,a secondary metal precursor is introduced to the primary single-atom sites to introduce direct metal-metal interaction,which ensures the formation of desired atom pair structure during the subsequent pyrolysis process and allows for successful construction of DACs.The as-prepared FeCo-NC DAC exhibits superior oxygen reduction electrocatalytic activity with a half-wave potential of 0,91 V vs.reversible hydrogen electrode.Zn-air batteries equipped with the FeCo-NC DAC demonstrate higher peak power density than those with the Pt/C benchmark.More importantly,this post-modification strategy is demonstrated universal to achieve a variety of dual-atom sites.This work presents an effective synthesis methodology for precise construction of catalytic materials and propels their applications in energy-related devices.展开更多
The solar-driven reduction of CO_(2) into valuable products is a promising method to alleviate global environmental problems and energy crises.However,the low surface charge density limits the photocatalytic conversio...The solar-driven reduction of CO_(2) into valuable products is a promising method to alleviate global environmental problems and energy crises.However,the low surface charge density limits the photocatalytic conversion performance of CO_(2).Herein,a polymeric carbon nitride(PCN)photocatalyst with Zn single atoms(Zn1/CN)was designed and synthesized for CO_(2) photoreduction.The results of the CO_(2) photoreduction studies show that the CO and CH_(4) yields of Zn1/CN increased fivefold,reaching 76.9 and 22.9μmol/(g·h),respectively,in contrast to the unmodified PCN.Ar+plasma-etched X-ray photoelectron spectroscopy and synchrotron radiation-based X-ray absorption fine structure results reveal that Zn single atom is mainly present in the interlayer space of PCN in the Zn–N_(4) configuration.Photoelectrochemical characterizations indicate that the interlayer Zn–N_(4) configuration can amplify light absorption and establish an interlayer charge transfer channel.Light-assisted Kelvin probe force microscopy confirms that more photogenerated electrons are delivered to the catalyst surface through interlayer Zn–N_(4) configuration,which increases its surface charge density.Further,in-situ infrared spectroscopy combined with density functional theory calculation reveals that promoted surface charge density accelerates key intermediates(*COOH)conversion,thus achieving efficient CO_(2) conversion.This work elucidates the role of internal single atoms in catalytic surface reactions,which provides important implications for the design of single-atom catalysts.展开更多
Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocata...Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocatalytic CO_(2)reduction reaction(PCO_(2)RR)relies on the semiconductor photocatalysts that suffer from high recombination rate of the photo-generated carriers,low light harvesting capability,and low stability.This review explores the recent discoveries on the novel semiconductors for PCO_(2)RR,focusing on the rational catalyst design strategies(such as surface engineering,band engineering,hierarchical structure construction,single-atom catalysts,and biohybrid catalysts)that promote the catalytic performance of semiconductor catalysts on PCO_(2)RR.The advanced characterization techniques that contribute to understanding the intrinsic properties of the photocatalysts are also discussed.Lastly,the perspectives on future challenges and possible solutions for PCO_(2)RR are presented.展开更多
Transition metal-based layered double hydroxides(LDHs)have been capable of working efficiently as catalysts in the basic oxygen evolution reaction(OER)for sustaining hydrogen production of alkaline water electrolysis....Transition metal-based layered double hydroxides(LDHs)have been capable of working efficiently as catalysts in the basic oxygen evolution reaction(OER)for sustaining hydrogen production of alkaline water electrolysis.Nevertheless,exploring new LDH-based electrocatalysts featuring both remarkable activity and good stability is still in high demand,which is pivotal for comprehensive understanding and impressive improvement of the sluggish OER kinetics.Here,a series of bimetallic(Co and Mo)LDH arrays were designed and fabricated via a facile and controlled strategy by incorporating a Mo source into presynthesized Co-based metal-organic framework(MOF)arrays on carbon cloth(CC),named as ZIF-67/CC arrays.We found that tuning the Mo content resulted in gradual differences in the structural properties,surface morphology,and chemical states of the resulting catalysts,namely CoMox-LDH/CC(x representing the added weight of the Mo source).Gratifyingly,the best-performing CoMo_(0.20)-LDH/CC electrocatalyst demonstrates a low overpotential of only 226 mV and high stability at a current density of 10 mA·cm^(−2),which is superior to most LDH-based OER catalysts reported previously.Furthermore,it only required 1.611 V voltage to drive the overall water splitting device at the current density of 10 mA·cm^(−2).The present study represents a significant advancement in the development and applications of new OER catalysts.展开更多
NH_(3)-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method.Due to its st...NH_(3)-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method.Due to its strong oxidation performance,Sn-MnO_(x) was prone to side reactions between NO,NH_(3)and O_(2),resulting in the generation of more NO_(2)and N_(2)O,here most of N_(2)O was driven from the non-selective oxidation of NH_(3),while a small part generated from the side reaction between NH_(3)and NO_(2).Co or Ni doping into Sn-MnO_(x) as solid solution components obviously stronged the electronic interaction for actively mobilization and weakened the oxidation performance for signally reducing the selective tendency of side reactions to N_(2)O.The optimal modification resulted in improving the surface area and enhancing the strong interaction between polyvalent cations in Co/Ni-Mn-SnO_(2)to provide more surface adsorbed oxygen,active sites of Mn^(3+) and Mn^(4+),high-content Sn^(4+) and plentiful Lewis-acidity for more active intermediates,which significantly broadened the activity window of Sn-MnOx,improved the N^(2) selectivity by inhibiting N_(2)O formation,and also contributed to an acceptable resistances to water and sulfur.At low reaction temperatures,the SCR reactions over three catalysts mainly obeyed the typical Elye-rideal(E-R)routs via the reactions of adsorbed L-NH_(x)(x=3,2,1)and B-NH_(4)^(+) with the gaseous NO to generate N_(2) but also N_(2)O by-products.Except for the above basic E-R reactions,as increasing the reaction temperature,the main adsorbed NO_(x)-species were bidentate nitrates that were also active in the Langmuir-Hinshelwood reactions with adsorbed L-NH_(x) species over Co/Ni modified Mn-SnO_(2) catalyst.展开更多
The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to ...The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to aromatics.The rational design of MoS_(2)-based catalyst greatly depends on the comprehensive understanding of its structure-activity relationship.However,an intensive summary and critical analysis are still scarce to date.In this review,we attempt to provide an in-depth understanding of the interplay of structure,catalysis,and stability of MoS_(2)-based catalysts for lignin hydrodeoxygenation.The recognition of intrinsic active sites on MoS_(2) structure was firstly discussed,followed by the illustration of MoS_(2)-catalyzed hydrodeoxygenation structural models.Afterward,based on the studies on the MoS_(2)-catalyzed lignin model compounds hydrodeoxygenation,the current active site modification strategies including structural modification of monometallic MoS_(2) catalysts and collaborative modification were summarized and emphatically discussed,which aims to elucidate the structure-activity relationship at the atomic-level.The deactivation mechanism and stabilization strategies were also illustrated to provide instructive suggestion for the rational design of efficient and stable MoS_(2)-based catalysts.Finally,the real lignin depolymerization over MoS_(2)-based catalysts was summarized to point out the advantages and difficulties.This review attempts to highlight the remaining challenges and provide some perspectives for the future development of MoS_(2)-based catalysts for lignin hydrodeoxygenation.展开更多
A novel selective catalytic reduction(SCR)catalyst with high catalytic activity on chloroaromatic organics at lower temperatures(160-180℃)is critical for municipal solid waste incineration(MSWI)plants.This study prep...A novel selective catalytic reduction(SCR)catalyst with high catalytic activity on chloroaromatic organics at lower temperatures(160-180℃)is critical for municipal solid waste incineration(MSWI)plants.This study prepares a series of honeycomb-type VO_(x)/TiO_(2) catalysts and finally develops a new low-temperature catalyst with high catalytic activity in eliminating chloroaromatic organics.Based on the conversion efficiency(CE)of 1,2-dichlorobenzene(1,2-DCB)and CO_(2) selectivity,the optimal VO_(x) content of 4.06%(in weight)in VO_(x)/TiO_(2) catalyst is first confirmed.By modifying CeO_(x) and WO_(x),a novel honeycomb-type catalyst of VO_(x)-CeO_(x)-WO_(x)/TiO_(2) achieves the highest CE(93.1%-93.6%)and CO_(2) selectivity(40.9%-60.7%)at 150-200℃.It was found that the CeO_(x) and WO_(x) can improve the catalytic activity by enriching the surface content of V and O,increasing the proportion of V5+and Osurf,enlarging the supply source of reactive oxygen species and their storage capacity,and accelerating the redox cycle of VO_(x),CeO_(x),WO_(x),and reactive oxygen species.This study can guide the development of monolithic low-temperature catalysts with high catalytic activity in eliminating chloroaromatic organics in MSWI flue gas.展开更多
Nano ZrO2 and MgO-ZrO2 were prepared by a self-assembly route and were employed as the support for Ni catalysts used in hydrogen production from glycerol reforming in supercritical water （SCW）. The reforming experim...Nano ZrO2 and MgO-ZrO2 were prepared by a self-assembly route and were employed as the support for Ni catalysts used in hydrogen production from glycerol reforming in supercritical water （SCW）. The reforming experiments were conducted in a tubular fixed-bed flow reactor over a temperature range of 600-800 ℃. The influences of process variables such as temperature, contact time, and water to glycerol ratio on hydrogen yield were investigated and the catalysts were charactered by ICP, BET, XRD and SEM. The results showed that high hydrogen yield was obtained from glycerol by reforming in supercritical water over the Ni/MgO-ZrO2 catalysts in a short contact time. The MgO in the catalyst showed significant promotion effect for hydrogen production likely due to the formation of the alkaline active site. Even when the glycerol feed concentration was up to 45 wt%, glycerol was completely gasified and transfered to the gas products containing hydrogen, carbon dioxide, and methane along with small amounts of carbon monoxide. At a diluted feed concentration of 5 wt%, near theoretical yield of 7 mole of H2/mol of glycerol could be obtained.展开更多
基金supported by Jiangsu Natural Science Foundation (No. BK2012347)the National High Technology and Development Program of China (863 Programs, No.2007AA061802)
文摘Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction （XRD）, high-resolution transmission electron microscope （HRTEM）, in situ Fourier transform infrared spectroscopy （in situ FT-IR） and temperature-programmed reduction （TPR） and their catalytic activities were evaluated with the selective catalytic reduction （SCR） of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window （below 120 ℃）. Among the tested catalysts, Mn-Fe- Cr （2 ： 2 ： 1） catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that （1） the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; （2） Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate （-NH3＋）, which favored the low-temperature SCR reaction.
基金This work was supported by the National Natural Science Foundation of China(22279008 and 22109082)the Beijing Institute of Technology Research Fund Program for Young Scholarsthe Tsinghua University Initiative Scientific Research Program。
文摘Dual-atom catalysts(DACs) afford promising potential for oxygen reduction electrocatalysis due to their high atomic efficiency and high intrinsic activity.However,precise construction of dual-atom sites remains a challenge.In this work,a post-modification strategy is proposed to precisely fabricate DACs for oxygen reduction electrocatalysis.Concretely,a secondary metal precursor is introduced to the primary single-atom sites to introduce direct metal-metal interaction,which ensures the formation of desired atom pair structure during the subsequent pyrolysis process and allows for successful construction of DACs.The as-prepared FeCo-NC DAC exhibits superior oxygen reduction electrocatalytic activity with a half-wave potential of 0,91 V vs.reversible hydrogen electrode.Zn-air batteries equipped with the FeCo-NC DAC demonstrate higher peak power density than those with the Pt/C benchmark.More importantly,this post-modification strategy is demonstrated universal to achieve a variety of dual-atom sites.This work presents an effective synthesis methodology for precise construction of catalytic materials and propels their applications in energy-related devices.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences,China(Nos.XDA23010300 and XDA23010000)the National Natural Science Foundation of China(Nos.51878644 and 41573138)the CAS Youth Interdisciplinary Team.
文摘The solar-driven reduction of CO_(2) into valuable products is a promising method to alleviate global environmental problems and energy crises.However,the low surface charge density limits the photocatalytic conversion performance of CO_(2).Herein,a polymeric carbon nitride(PCN)photocatalyst with Zn single atoms(Zn1/CN)was designed and synthesized for CO_(2) photoreduction.The results of the CO_(2) photoreduction studies show that the CO and CH_(4) yields of Zn1/CN increased fivefold,reaching 76.9 and 22.9μmol/(g·h),respectively,in contrast to the unmodified PCN.Ar+plasma-etched X-ray photoelectron spectroscopy and synchrotron radiation-based X-ray absorption fine structure results reveal that Zn single atom is mainly present in the interlayer space of PCN in the Zn–N_(4) configuration.Photoelectrochemical characterizations indicate that the interlayer Zn–N_(4) configuration can amplify light absorption and establish an interlayer charge transfer channel.Light-assisted Kelvin probe force microscopy confirms that more photogenerated electrons are delivered to the catalyst surface through interlayer Zn–N_(4) configuration,which increases its surface charge density.Further,in-situ infrared spectroscopy combined with density functional theory calculation reveals that promoted surface charge density accelerates key intermediates(*COOH)conversion,thus achieving efficient CO_(2) conversion.This work elucidates the role of internal single atoms in catalytic surface reactions,which provides important implications for the design of single-atom catalysts.
基金This work was supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)。
文摘Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocatalytic CO_(2)reduction reaction(PCO_(2)RR)relies on the semiconductor photocatalysts that suffer from high recombination rate of the photo-generated carriers,low light harvesting capability,and low stability.This review explores the recent discoveries on the novel semiconductors for PCO_(2)RR,focusing on the rational catalyst design strategies(such as surface engineering,band engineering,hierarchical structure construction,single-atom catalysts,and biohybrid catalysts)that promote the catalytic performance of semiconductor catalysts on PCO_(2)RR.The advanced characterization techniques that contribute to understanding the intrinsic properties of the photocatalysts are also discussed.Lastly,the perspectives on future challenges and possible solutions for PCO_(2)RR are presented.
基金the financial support of the Fundamental Research Funds for the Central Universities(No.40120631)the National Natural Science Foundation of China(No.52202291)for the support.+1 种基金C.C.acknowledges the financial support of Natural Science Foundation of Hubei Province(No.2022CFB388)the Natural Science Foundation of Hainan Province of China(No.623MS068).
文摘Transition metal-based layered double hydroxides(LDHs)have been capable of working efficiently as catalysts in the basic oxygen evolution reaction(OER)for sustaining hydrogen production of alkaline water electrolysis.Nevertheless,exploring new LDH-based electrocatalysts featuring both remarkable activity and good stability is still in high demand,which is pivotal for comprehensive understanding and impressive improvement of the sluggish OER kinetics.Here,a series of bimetallic(Co and Mo)LDH arrays were designed and fabricated via a facile and controlled strategy by incorporating a Mo source into presynthesized Co-based metal-organic framework(MOF)arrays on carbon cloth(CC),named as ZIF-67/CC arrays.We found that tuning the Mo content resulted in gradual differences in the structural properties,surface morphology,and chemical states of the resulting catalysts,namely CoMox-LDH/CC(x representing the added weight of the Mo source).Gratifyingly,the best-performing CoMo_(0.20)-LDH/CC electrocatalyst demonstrates a low overpotential of only 226 mV and high stability at a current density of 10 mA·cm^(−2),which is superior to most LDH-based OER catalysts reported previously.Furthermore,it only required 1.611 V voltage to drive the overall water splitting device at the current density of 10 mA·cm^(−2).The present study represents a significant advancement in the development and applications of new OER catalysts.
基金financially supported by National Natural Science Foundation of China (Nos. U20A20130, 21806009)China Postdoctoral Science Foundation (2019T120049)Fundamental Research Funds for the Central Universities (No. 06500152).
文摘NH_(3)-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method.Due to its strong oxidation performance,Sn-MnO_(x) was prone to side reactions between NO,NH_(3)and O_(2),resulting in the generation of more NO_(2)and N_(2)O,here most of N_(2)O was driven from the non-selective oxidation of NH_(3),while a small part generated from the side reaction between NH_(3)and NO_(2).Co or Ni doping into Sn-MnO_(x) as solid solution components obviously stronged the electronic interaction for actively mobilization and weakened the oxidation performance for signally reducing the selective tendency of side reactions to N_(2)O.The optimal modification resulted in improving the surface area and enhancing the strong interaction between polyvalent cations in Co/Ni-Mn-SnO_(2)to provide more surface adsorbed oxygen,active sites of Mn^(3+) and Mn^(4+),high-content Sn^(4+) and plentiful Lewis-acidity for more active intermediates,which significantly broadened the activity window of Sn-MnOx,improved the N^(2) selectivity by inhibiting N_(2)O formation,and also contributed to an acceptable resistances to water and sulfur.At low reaction temperatures,the SCR reactions over three catalysts mainly obeyed the typical Elye-rideal(E-R)routs via the reactions of adsorbed L-NH_(x)(x=3,2,1)and B-NH_(4)^(+) with the gaseous NO to generate N_(2) but also N_(2)O by-products.Except for the above basic E-R reactions,as increasing the reaction temperature,the main adsorbed NO_(x)-species were bidentate nitrates that were also active in the Langmuir-Hinshelwood reactions with adsorbed L-NH_(x) species over Co/Ni modified Mn-SnO_(2) catalyst.
基金supported by the National Natural Science Foundation of China(22178258,21975181)。
文摘The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to aromatics.The rational design of MoS_(2)-based catalyst greatly depends on the comprehensive understanding of its structure-activity relationship.However,an intensive summary and critical analysis are still scarce to date.In this review,we attempt to provide an in-depth understanding of the interplay of structure,catalysis,and stability of MoS_(2)-based catalysts for lignin hydrodeoxygenation.The recognition of intrinsic active sites on MoS_(2) structure was firstly discussed,followed by the illustration of MoS_(2)-catalyzed hydrodeoxygenation structural models.Afterward,based on the studies on the MoS_(2)-catalyzed lignin model compounds hydrodeoxygenation,the current active site modification strategies including structural modification of monometallic MoS_(2) catalysts and collaborative modification were summarized and emphatically discussed,which aims to elucidate the structure-activity relationship at the atomic-level.The deactivation mechanism and stabilization strategies were also illustrated to provide instructive suggestion for the rational design of efficient and stable MoS_(2)-based catalysts.Finally,the real lignin depolymerization over MoS_(2)-based catalysts was summarized to point out the advantages and difficulties.This review attempts to highlight the remaining challenges and provide some perspectives for the future development of MoS_(2)-based catalysts for lignin hydrodeoxygenation.
基金supported by the National Key Research and Development Program of China (No.2020YFC1910100).
文摘A novel selective catalytic reduction(SCR)catalyst with high catalytic activity on chloroaromatic organics at lower temperatures(160-180℃)is critical for municipal solid waste incineration(MSWI)plants.This study prepares a series of honeycomb-type VO_(x)/TiO_(2) catalysts and finally develops a new low-temperature catalyst with high catalytic activity in eliminating chloroaromatic organics.Based on the conversion efficiency(CE)of 1,2-dichlorobenzene(1,2-DCB)and CO_(2) selectivity,the optimal VO_(x) content of 4.06%(in weight)in VO_(x)/TiO_(2) catalyst is first confirmed.By modifying CeO_(x) and WO_(x),a novel honeycomb-type catalyst of VO_(x)-CeO_(x)-WO_(x)/TiO_(2) achieves the highest CE(93.1%-93.6%)and CO_(2) selectivity(40.9%-60.7%)at 150-200℃.It was found that the CeO_(x) and WO_(x) can improve the catalytic activity by enriching the surface content of V and O,increasing the proportion of V5+and Osurf,enlarging the supply source of reactive oxygen species and their storage capacity,and accelerating the redox cycle of VO_(x),CeO_(x),WO_(x),and reactive oxygen species.This study can guide the development of monolithic low-temperature catalysts with high catalytic activity in eliminating chloroaromatic organics in MSWI flue gas.
基金supported by the National Natural Science Foundation (21076047 and 21276054)the Natural Science Foundation of Zhongkai University of Agriculture and Engineering (G3100026)
文摘Nano ZrO2 and MgO-ZrO2 were prepared by a self-assembly route and were employed as the support for Ni catalysts used in hydrogen production from glycerol reforming in supercritical water （SCW）. The reforming experiments were conducted in a tubular fixed-bed flow reactor over a temperature range of 600-800 ℃. The influences of process variables such as temperature, contact time, and water to glycerol ratio on hydrogen yield were investigated and the catalysts were charactered by ICP, BET, XRD and SEM. The results showed that high hydrogen yield was obtained from glycerol by reforming in supercritical water over the Ni/MgO-ZrO2 catalysts in a short contact time. The MgO in the catalyst showed significant promotion effect for hydrogen production likely due to the formation of the alkaline active site. Even when the glycerol feed concentration was up to 45 wt%, glycerol was completely gasified and transfered to the gas products containing hydrogen, carbon dioxide, and methane along with small amounts of carbon monoxide. At a diluted feed concentration of 5 wt%, near theoretical yield of 7 mole of H2/mol of glycerol could be obtained.
