The feasibility of paigeite ore treatment with iron nugget making process is proved. The isothermal reduc- tion experiments at laboratory scale were carried out, using carbon bearing pellets which were made of boron c...The feasibility of paigeite ore treatment with iron nugget making process is proved. The isothermal reduc- tion experiments at laboratory scale were carried out, using carbon bearing pellets which were made of boron contai- ning iron concentrate and pulverized coal mainly, from 1 623 to 1 723 K with different heating time. The results indi- cated that iron nugget making process depends mainly on heating time and temperature. And the iron nugget and slag can separate in a clean manner at 1 673 K for 15 min. For the iron nugget, the C content is 3.57% （mass percent） and B is 0. 065~ （mass percent）. The B203 content of slag is 20.01~/00, and the boron was concentrated into one phase which is identified as suanite （Mg2BaOs） during the solidification. With an extraction ratio of 80~ under the atmospheric conditions, the activity of boron in slag is good. The boron-rich slag can be used to extract boric or boric acid and alleviate the shortage of boron resource. Through series of calculation and analysis related, it can be conclu- ded that the recovery ratio of Fe and boron are about 98% and 97% respectively. The results show that this method is feasible and effective on the utilization of paigeite ore.展开更多
The mechanism of improving compressive strength of magnetite pellet by adding boron-bearing iron concentrate was studied. Boron-bearing iron concentrate and magnetite were mixed, pelletized and roasted under differ en...The mechanism of improving compressive strength of magnetite pellet by adding boron-bearing iron concentrate was studied. Boron-bearing iron concentrate and magnetite were mixed, pelletized and roasted under differ ent roasting conditions. Then, compressive strength of pellets was tested, and polished sections of the roasted pellets were analyzed from the perspective of mineralogy. Finally, the effects of different proportions, roasting temperatures and roasting time of boron-bearing iron concentrate on the compressive strength of magnetite pellets were investigated and explained.展开更多
Realizing the boron and iron separation through selective reduction and melting separation of boron-bearing iron con- centrate is of great significance for the utilization of crude ludwigite. The reduction and melting...Realizing the boron and iron separation through selective reduction and melting separation of boron-bearing iron con- centrate is of great significance for the utilization of crude ludwigite. The reduction and melting separation mechanism of boron-bearing iron concentrate/coal composite pellet was systematically investigated. The reduction and melting separation test of small size pellet was performed to reveal the evolution of slag and iron in the melting separation process. The isothermal reduction experiment showed the relationship between reduction stage and melting separation stage, and the step reduction and melting separation was perfectly achieved. Coal particles existed through the reduction and melting separation process and finally formed brown residue around the separated product. The pellet could not realize melting separation when the B2O3 content in the concentrate was lower than 6.00 wt%.展开更多
基金Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China (2008BAB32B05)
文摘The feasibility of paigeite ore treatment with iron nugget making process is proved. The isothermal reduc- tion experiments at laboratory scale were carried out, using carbon bearing pellets which were made of boron contai- ning iron concentrate and pulverized coal mainly, from 1 623 to 1 723 K with different heating time. The results indi- cated that iron nugget making process depends mainly on heating time and temperature. And the iron nugget and slag can separate in a clean manner at 1 673 K for 15 min. For the iron nugget, the C content is 3.57% （mass percent） and B is 0. 065~ （mass percent）. The B203 content of slag is 20.01~/00, and the boron was concentrated into one phase which is identified as suanite （Mg2BaOs） during the solidification. With an extraction ratio of 80~ under the atmospheric conditions, the activity of boron in slag is good. The boron-rich slag can be used to extract boric or boric acid and alleviate the shortage of boron resource. Through series of calculation and analysis related, it can be conclu- ded that the recovery ratio of Fe and boron are about 98% and 97% respectively. The results show that this method is feasible and effective on the utilization of paigeite ore.
基金Item Sponsored by National Natural Science Foundation of China(51204013)Fundamental Research Funds for Central Universities of China(FRF-TP-12-020A)
文摘The mechanism of improving compressive strength of magnetite pellet by adding boron-bearing iron concentrate was studied. Boron-bearing iron concentrate and magnetite were mixed, pelletized and roasted under differ ent roasting conditions. Then, compressive strength of pellets was tested, and polished sections of the roasted pellets were analyzed from the perspective of mineralogy. Finally, the effects of different proportions, roasting temperatures and roasting time of boron-bearing iron concentrate on the compressive strength of magnetite pellets were investigated and explained.
基金The authors would like to express their gratitude for the financial support of the China Postdoctoral Science Foundation （No. 2016M600919） and National Natural Science Foundation of China （No. 51274033）.
文摘Realizing the boron and iron separation through selective reduction and melting separation of boron-bearing iron con- centrate is of great significance for the utilization of crude ludwigite. The reduction and melting separation mechanism of boron-bearing iron concentrate/coal composite pellet was systematically investigated. The reduction and melting separation test of small size pellet was performed to reveal the evolution of slag and iron in the melting separation process. The isothermal reduction experiment showed the relationship between reduction stage and melting separation stage, and the step reduction and melting separation was perfectly achieved. Coal particles existed through the reduction and melting separation process and finally formed brown residue around the separated product. The pellet could not realize melting separation when the B2O3 content in the concentrate was lower than 6.00 wt%.
