Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterize...Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy.Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites.It is found that Vickers hardness,bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass.Delamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load.Strengthening and fracture mechanisms of the composite are analyzed.展开更多
High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the freque...High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.展开更多
The accumulative roll-bonding(ARB)process was applied on the strips of aluminum alloy 1050 in two processing conditions:cold ARB and warm ARB.The results of tensile tests and microhardness measurement show that the wa...The accumulative roll-bonding(ARB)process was applied on the strips of aluminum alloy 1050 in two processing conditions:cold ARB and warm ARB.The results of tensile tests and microhardness measurement show that the warm ARB process exhibits the lower tensile strength and microhardness,more homogeneous distribution of the microhardness,higher elongation,and especially superior planar isotropy of the tensile properties in comparison to the cold ARB,because of the intermediate heat treatment as well as the elevated temperature rolling in the warm ARB process.Furthermore,with increasing the cycles of both processes,the planar isotropy decreases progressively.展开更多
The 7075 Al alloy was processed by accumulative roll bonding （ARB） at 350 ℃ using 2：1, 3：1 and 4：1 thickness reductions per pass （Rp） up to 8, 6 and 3 passes, respectively. Microstructural examinations of the ...The 7075 Al alloy was processed by accumulative roll bonding （ARB） at 350 ℃ using 2：1, 3：1 and 4：1 thickness reductions per pass （Rp） up to 8, 6 and 3 passes, respectively. Microstructural examinations of the processed samples revealed that ARB leads to a microstructure composed of equiaxed crystallites with a mean size generally lower than 500 nm. It was found that, due to both the stored energy through- out the processing and the particle pinning effect, the alloy is affected by discontinuous recrystallisation during the inter-pass heating stages, the precise microstructural evolution being dependent on Rp. Me- chanical testing of the ARBed samples revealed that the main active deformation mechanism in the ARBed samples in the temperature range from 250 to 350 ℃ at intermediate and high strain rates is grain bound- ary sliding, the superplastic properties being determined by both the microstructure after ARB and its thermal stability.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 50890173)
文摘Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy.Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites.It is found that Vickers hardness,bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass.Delamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load.Strengthening and fracture mechanisms of the composite are analyzed.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51671063,51771060,51871068,51971071)the Domain Foundation of Equipment Advance Research of 13th Five-year Plan(No.61409220118)+1 种基金the Fundamental Research Funds for the Central Universities(No.HEUCFG201834)the Harbin City Application Technology Research and Development Project(No.2017RAQXJ032).
文摘High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.
文摘The accumulative roll-bonding(ARB)process was applied on the strips of aluminum alloy 1050 in two processing conditions:cold ARB and warm ARB.The results of tensile tests and microhardness measurement show that the warm ARB process exhibits the lower tensile strength and microhardness,more homogeneous distribution of the microhardness,higher elongation,and especially superior planar isotropy of the tensile properties in comparison to the cold ARB,because of the intermediate heat treatment as well as the elevated temperature rolling in the warm ARB process.Furthermore,with increasing the cycles of both processes,the planar isotropy decreases progressively.
基金support from the CICYT (Projects Nos. MAT200914452 and MAT2012-38962)
文摘The 7075 Al alloy was processed by accumulative roll bonding （ARB） at 350 ℃ using 2：1, 3：1 and 4：1 thickness reductions per pass （Rp） up to 8, 6 and 3 passes, respectively. Microstructural examinations of the processed samples revealed that ARB leads to a microstructure composed of equiaxed crystallites with a mean size generally lower than 500 nm. It was found that, due to both the stored energy through- out the processing and the particle pinning effect, the alloy is affected by discontinuous recrystallisation during the inter-pass heating stages, the precise microstructural evolution being dependent on Rp. Me- chanical testing of the ARBed samples revealed that the main active deformation mechanism in the ARBed samples in the temperature range from 250 to 350 ℃ at intermediate and high strain rates is grain bound- ary sliding, the superplastic properties being determined by both the microstructure after ARB and its thermal stability.
