Environmental pollution,such as water contamination,is a critical issue that must be absolutely addressed.Here,three different morphologies of tungsten-based photocatalysts(WO_(3)nanorods,WO_(3)/WS_(2)nanobricks,WO_(3...Environmental pollution,such as water contamination,is a critical issue that must be absolutely addressed.Here,three different morphologies of tungsten-based photocatalysts(WO_(3)nanorods,WO_(3)/WS_(2)nanobricks,WO_(3)/WS_(2)nanorods)are made using a simple hydrothermal method by changing the solvents(H_(2)O,DMF,aqueous HCl solution).The as-prepared nanocatalysts have excellent thermal stability,large porosity,and high hydrophilicity.The results show all materials have good photocatalytic activity in aqueous media,with WO_(3)/WS_(2)nanorods(NRs)having the best activity in the photodegradation of bisphenol A(BPA)under visible-light irradiation.This may originate from increased migration of charge carriers and effective prevention of electron–hole recombination in WO_(3)/WS_(2)NRs,whereby this photocatalyst is able to generate more reactive·OH and·O_(2)^(–)species,leading to greater photocatalytic activity.About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO_(3)/WS_(2)NRs and 5.0 mg/L BPA at pH 7.0.Additionally,the optimal conditions(pH,catalyst dosage,initial BPA concentration)for WO_(3)/WS_(2)NRs are also elaborately investigated.These rod-like heterostructures are expressed as potential catalysts with excellent photostability,efficient reusability,and highly active effectivity in different types of water.In particular,the removal efficiency of BPA by WO_(3)/WS_(2)NRs reduces by only 1.5% after five recycling runs and even reaches 89.1%in contaminated lake water.This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources,which is advantageous to various applications in environmental remediation.展开更多
The waterborne particles of bisphenol A epoxy resin were prepared by the phaseinversion technique, and the effects of the concentration of the synthetic polymeric emulslfleron the particles size and structure were dis...The waterborne particles of bisphenol A epoxy resin were prepared by the phaseinversion technique, and the effects of the concentration of the synthetic polymeric emulslfleron the particles size and structure were discussed. At lower concentration of the emulsifier,the bigger molecular sieves alike particles were obtained, on the contrary, the smallerparticles with some aggregation were prepared at higher concentration of the emulslfler. Theformation mechanism of different particle sizes and structure at different concentrations of theemulsifier was proposed. presides, the probable model of the aggregation was also brieflypresented.展开更多
Considering atomic property vector and atomic correlative function, the 3-dimensional structural vector of atomic property correlation （3D-VAPC）, a novel descriptor,is defined to characterize a 3-dimensional molecul...Considering atomic property vector and atomic correlative function, the 3-dimensional structural vector of atomic property correlation （3D-VAPC）, a novel descriptor,is defined to characterize a 3-dimensional molecular structure by introducing self-adaptability regulation mechanism and the idea of orientating to customers. Characterizing the structures of 25 bisphenol A compounds by this vector, the QSAR models of three kinds of estrogen activities （ER affinities, gene induction and cell proliferation） have high multiple correlation coefficient （Rcum^2=0.933, 0.813, 0.959） and cross verification coefficient （Qcum^2=0.847, 0.953, 0.798） by support vector machine （SVM）, which suits for nonlinear circumstances. The above results show that the models successfully express the correlation between structure and three kinds of estrogen activities. Therefore, 3D-VAPC exactly reflects the molecular structural information and SVM method correctly describes the correlation between information and property of the compounds.展开更多
采用红外光谱(FT-IR)和核磁共振(29S i NMR)对3,3'-二(3-三甲氧基硅丙基)双酚A环氧树脂(SEP)进行了结构表征,并对其性能和固化进行了研究。该树脂为含烷氧硅基的环氧树脂,室温下可流动,室温下黏度比E51大,在60℃以上黏度相近。采用...采用红外光谱(FT-IR)和核磁共振(29S i NMR)对3,3'-二(3-三甲氧基硅丙基)双酚A环氧树脂(SEP)进行了结构表征,并对其性能和固化进行了研究。该树脂为含烷氧硅基的环氧树脂,室温下可流动,室温下黏度比E51大,在60℃以上黏度相近。采用表干时间、DSC和FT-IR等对SEP的湿固化研究结果表明,该环氧树脂通过硅氧烷水解缩合而固化,表干时间随固化温度升高而减小。该环氧树脂可以像E-51一样用胺类固化剂进行固化,低温下凝胶时间稍长,90℃以上比较接近。展开更多
基金The Vietnam National Foundation for Science and Technology Development(NAFOSTED)and the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(Grant No.NRF-2022R1A2C1012996)。
文摘Environmental pollution,such as water contamination,is a critical issue that must be absolutely addressed.Here,three different morphologies of tungsten-based photocatalysts(WO_(3)nanorods,WO_(3)/WS_(2)nanobricks,WO_(3)/WS_(2)nanorods)are made using a simple hydrothermal method by changing the solvents(H_(2)O,DMF,aqueous HCl solution).The as-prepared nanocatalysts have excellent thermal stability,large porosity,and high hydrophilicity.The results show all materials have good photocatalytic activity in aqueous media,with WO_(3)/WS_(2)nanorods(NRs)having the best activity in the photodegradation of bisphenol A(BPA)under visible-light irradiation.This may originate from increased migration of charge carriers and effective prevention of electron–hole recombination in WO_(3)/WS_(2)NRs,whereby this photocatalyst is able to generate more reactive·OH and·O_(2)^(–)species,leading to greater photocatalytic activity.About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO_(3)/WS_(2)NRs and 5.0 mg/L BPA at pH 7.0.Additionally,the optimal conditions(pH,catalyst dosage,initial BPA concentration)for WO_(3)/WS_(2)NRs are also elaborately investigated.These rod-like heterostructures are expressed as potential catalysts with excellent photostability,efficient reusability,and highly active effectivity in different types of water.In particular,the removal efficiency of BPA by WO_(3)/WS_(2)NRs reduces by only 1.5% after five recycling runs and even reaches 89.1%in contaminated lake water.This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources,which is advantageous to various applications in environmental remediation.
文摘The waterborne particles of bisphenol A epoxy resin were prepared by the phaseinversion technique, and the effects of the concentration of the synthetic polymeric emulslfleron the particles size and structure were discussed. At lower concentration of the emulsifier,the bigger molecular sieves alike particles were obtained, on the contrary, the smallerparticles with some aggregation were prepared at higher concentration of the emulslfler. Theformation mechanism of different particle sizes and structure at different concentrations of theemulsifier was proposed. presides, the probable model of the aggregation was also brieflypresented.
基金This work was supported by the Natural Science Foundation of CQ CSTC (No. 2006BB5177)
文摘Considering atomic property vector and atomic correlative function, the 3-dimensional structural vector of atomic property correlation （3D-VAPC）, a novel descriptor,is defined to characterize a 3-dimensional molecular structure by introducing self-adaptability regulation mechanism and the idea of orientating to customers. Characterizing the structures of 25 bisphenol A compounds by this vector, the QSAR models of three kinds of estrogen activities （ER affinities, gene induction and cell proliferation） have high multiple correlation coefficient （Rcum^2=0.933, 0.813, 0.959） and cross verification coefficient （Qcum^2=0.847, 0.953, 0.798） by support vector machine （SVM）, which suits for nonlinear circumstances. The above results show that the models successfully express the correlation between structure and three kinds of estrogen activities. Therefore, 3D-VAPC exactly reflects the molecular structural information and SVM method correctly describes the correlation between information and property of the compounds.
文摘采用红外光谱(FT-IR)和核磁共振(29S i NMR)对3,3'-二(3-三甲氧基硅丙基)双酚A环氧树脂(SEP)进行了结构表征,并对其性能和固化进行了研究。该树脂为含烷氧硅基的环氧树脂,室温下可流动,室温下黏度比E51大,在60℃以上黏度相近。采用表干时间、DSC和FT-IR等对SEP的湿固化研究结果表明,该环氧树脂通过硅氧烷水解缩合而固化,表干时间随固化温度升高而减小。该环氧树脂可以像E-51一样用胺类固化剂进行固化,低温下凝胶时间稍长,90℃以上比较接近。
