A new basic electrolyte with two cationic plating additives, polydiaminourea and polyaminosulfone, was investigated for the electrochemical deposition of the bismuth telluride film on a nickel-plated copper foil. Tell...A new basic electrolyte with two cationic plating additives, polydiaminourea and polyaminosulfone, was investigated for the electrochemical deposition of the bismuth telluride film on a nickel-plated copper foil. Tellurium starts to deposit at a higher potential （-0.35 V） than bismuth （-0.5 V） in this electrolyte. The tellurium-to-bismuth ratio increases while the deposition potential declines from -1 to -1.25 V, indicating a kinetically quicker bismuth deposition at higher potentials. The as-deposited film features good adhesion to the substrate and smooth morphology, and has a nearly amorphous crystal structure disclosed by X-ray diffraction patterns.展开更多
水系金属空气电池具有理论能量密度高、安全性高等优点,但受限于金属阳极(如锌、铁、铝、镁)的电化学不可逆性以及碱性电解质对大气中二氧化碳的化学不稳定性.本工作首次设计了一种可充电的铋-空气电池,该电池使用了非碱性的三氟甲磺酸...水系金属空气电池具有理论能量密度高、安全性高等优点,但受限于金属阳极(如锌、铁、铝、镁)的电化学不可逆性以及碱性电解质对大气中二氧化碳的化学不稳定性.本工作首次设计了一种可充电的铋-空气电池,该电池使用了非碱性的三氟甲磺酸铋(Bi(OTf)_(3))水系电解质.得益于三电子反应和相对于标准氢电极+0.32 V的高电位,铋金属负极具有383 mA h g^(−1)的高比容量和1000次循环的良好稳定性,以及99.6%高库仑效率.铋金属负极在Bi(OTf)_(3)电解液中无腐蚀、钝化和析氢等副反应.此外,非碱性的铋-空气电池通过三氧化二铋(Bi_(2)O_(3))的可逆形成/分解,在环境空气中实现了长期运行稳定性(>200 h).这项工作为探索新型水系金属空气电池作为安全稳定的电源系统提供了新思路.展开更多
The nanocrystalline Bi2O3-Y2O3 solid electrolyte material was synthesized by pressureless reactive sintering process with Bi2O3 and Y2O3 nano mixed powder as raw materials, which was prepared by a chemical coprecipita...The nanocrystalline Bi2O3-Y2O3 solid electrolyte material was synthesized by pressureless reactive sintering process with Bi2O3 and Y2O3 nano mixed powder as raw materials, which was prepared by a chemical coprecipitation process. The study on the behavior of nano δ-Bi2O3 formation and its grain growth showed that the solid solution reaction of Y2O3 and δ-Bi2O3 to form δ-Bi2O3 occurs mainly in the initial stage of sintering process, and nano δ-Bi2O3 crystal grains grow approximately following the rule of paracurve （（D-D0）^2=K.t） during sintering process. After sintered at 600℃ for 2 h, the samples could reach above 96% in relative density and have dense microstructure with few remaining pores, the δ-Bi2O3 grains are less than 100 nm in size.展开更多
基金supported by the National Natural Science Foundation of China(No.50731006)
文摘A new basic electrolyte with two cationic plating additives, polydiaminourea and polyaminosulfone, was investigated for the electrochemical deposition of the bismuth telluride film on a nickel-plated copper foil. Tellurium starts to deposit at a higher potential （-0.35 V） than bismuth （-0.5 V） in this electrolyte. The tellurium-to-bismuth ratio increases while the deposition potential declines from -1 to -1.25 V, indicating a kinetically quicker bismuth deposition at higher potentials. The as-deposited film features good adhesion to the substrate and smooth morphology, and has a nearly amorphous crystal structure disclosed by X-ray diffraction patterns.
基金financially supported by the Science and Technology Commission of Shanghai Municipality(STCSM,21511104900 and 20JC1414902)the National Natural Science Foundation of China(52222310).
文摘水系金属空气电池具有理论能量密度高、安全性高等优点,但受限于金属阳极(如锌、铁、铝、镁)的电化学不可逆性以及碱性电解质对大气中二氧化碳的化学不稳定性.本工作首次设计了一种可充电的铋-空气电池,该电池使用了非碱性的三氟甲磺酸铋(Bi(OTf)_(3))水系电解质.得益于三电子反应和相对于标准氢电极+0.32 V的高电位,铋金属负极具有383 mA h g^(−1)的高比容量和1000次循环的良好稳定性,以及99.6%高库仑效率.铋金属负极在Bi(OTf)_(3)电解液中无腐蚀、钝化和析氢等副反应.此外,非碱性的铋-空气电池通过三氧化二铋(Bi_(2)O_(3))的可逆形成/分解,在环境空气中实现了长期运行稳定性(>200 h).这项工作为探索新型水系金属空气电池作为安全稳定的电源系统提供了新思路.
基金financially supported by the National Nature Science Foundation of China (No.20101006)the Nano Technology Special Foundation of Shanghai Science and Technology Committee (No.O452nm073)
文摘The nanocrystalline Bi2O3-Y2O3 solid electrolyte material was synthesized by pressureless reactive sintering process with Bi2O3 and Y2O3 nano mixed powder as raw materials, which was prepared by a chemical coprecipitation process. The study on the behavior of nano δ-Bi2O3 formation and its grain growth showed that the solid solution reaction of Y2O3 and δ-Bi2O3 to form δ-Bi2O3 occurs mainly in the initial stage of sintering process, and nano δ-Bi2O3 crystal grains grow approximately following the rule of paracurve （（D-D0）^2=K.t） during sintering process. After sintered at 600℃ for 2 h, the samples could reach above 96% in relative density and have dense microstructure with few remaining pores, the δ-Bi2O3 grains are less than 100 nm in size.
