Improving the carrying ability of oil film between slipper and swash plate and reducing the partial abrasion of slipper are important to improve the service life and reliability of axial piston pump.In this paper,a nu...Improving the carrying ability of oil film between slipper and swash plate and reducing the partial abrasion of slipper are important to improve the service life and reliability of axial piston pump.In this paper,a numerical simulation model was developed for slipper/swash-plate friction pair based on the elastohydrodynamic theory.The dynamic micro-motion and pressure distribution of slipper were analyzed and it was pointed out that the tilt of slipper was the main reason for its partial abrasion.The simulations about the slippers with different slopes on the outer edge of the sealing belt showed that the partial abrasion could reduce the carrying ability and increase the leakage of the slipper/swash-plate pair.The proper slope on the inner edge helped to improve the carrying ability and reduce the leakage of slipper.The experimental tests were in accord with the simulation results to a great extent,showing that the simulation model had a high accuracy and could be applied to the design and optimization of slipper,and that the slipper with optimal inner slope provided an encouraging method to improve the efficiency and reliability of axial piston pump.展开更多
Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple,...Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple, a single-piston model of the aviation axial-piston pump is presented. This sin- gle-piston model comprehensively considers fluid compressibility, orifice restriction effect, fluid resistance in the capillary tube, and the leakage flow. Besides, the instantaneous discharge areas used in the single-piston model have been calculated in detail. Based on the single-piston model, a multi-piston pump model has been established according to the simple hydraulic circuit. The sin- gle- and multi-piston pump models have been realized by the S-function in Matlab/Simulink. The developed multi-piston pump model has been validated by being compared with the numerical result by computational fluid dynamic （CFD）. The effects of the pre-pressurization fluid path on the flow ripple and the instantaneous pressure in the piston chamber have been studied and opti- mized design recommendations for the aviation axial-piston pump have been given out.展开更多
Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However,air?release and cavitation can occur near the grooves. The valve plate utilizing damping holes show e...Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However,air?release and cavitation can occur near the grooves. The valve plate utilizing damping holes show excellent perfor?mance in avoiding air?release and cavitation. This study aims to reduce the noise emitted from an axial piston pump using a novel valve plate utilizing damping holes. A dynamic pump model is developed,in which the fluid properties are carefully modeled to capture the phenomena of air release and cavitation. The causes of di erent noise sources are investigated using the model. A comprehensive parametric analysis is conducted to enhance the understanding of the e ects of the valve plate parameters on the noise sources. A multi?objective genetic algorithm optimization method is proposed to optimize the parameters of valve plate. The amplitudes of the swash plate moment and flow rates in the inlet and outlet ports are defined as the objective functions. The pressure overshoot and undershoot in the piston chamber are limited by properly constraining the highest and lowest pressure values. A comparison of the various noise sources between the original and optimized designs over a wide range of pressure levels shows that the noise sources are reduced at high pressures. The results of the sound pressure level measurements show that the optimized valve plate reduces the noise level by 1.6 d B(A) at the rated working condition. The proposed method is e ective in reducing the noise of axial piston pumps and contributes to the development of quieter axial piston machines.展开更多
The optimization of the valve plate transition region is an important way of reducing the noise emission for an axial piston pump. However, the optimized methods through simulation or experiment are actually trial and...The optimization of the valve plate transition region is an important way of reducing the noise emission for an axial piston pump. However, the optimized methods through simulation or experiment are actually trial and error, and they cannot indicate the precise structural parameters of the valve plate transition region. In this study, a new design method for the transition region of valve plate based on the matching of flow area and reduction of transient reverse flow was proposed, and with which a valve plate was designed. Then, the impact of the flow ripple in the discharge line of an axial piston pump and the pressure overshoot and undershoot in the piston chamber on hydraulic and structural noise for axial piston pump is discussed. The noise reduction effect of the axial piston pump with this valve plate was analyzed by adopting a flow characteristic simulation model. Finally, the results showed that the application of this design method could contribute much to the reduction of the flow ripple and elimination of the pressure overshoot and undershoot. As a consequence, the method can be used in the design of a low-noise open circuit axial piston pump.展开更多
Axial piston pumps have been widely used in aircraft hydraulic systems to supply the system with pressurized fluid. The continuous improvement of the aircraft performance has put forward the demand on aviation piston ...Axial piston pumps have been widely used in aircraft hydraulic systems to supply the system with pressurized fluid. The continuous improvement of the aircraft performance has put forward the demand on aviation piston pumps for high power density, safety, and reliability. The lubricating interfaces in axial piston machines are the key design issue that greatly determines the pump performance and service life. The cylinder block/valve plate interface is one of these critical lubricating interfaces and has received considerable attention from many researchers in the last half century. This study aims to review the state-of-the-art literature on the cylinder block/valve plate interface comprehensively and systematically. First, we introduce various theoretical models developed to investigate the lubrication behaviors of the interface and compare them in terms of their assumptions and limitations. Second, the experimental studies on the cylinder block/valve plate interface are presented comprehensively, where the involved test rigs are divided into three types according to their fidelity levels and measurement functionality. Third, we summarize some typical approaches of structure optimization, surface shaping, and surface strengthening, which help improve the load-carrying and anti-wear capacities of the interface under severe operating conditions. Finally, the challenges and future trends of the cylinder block/valve plate interface research are discussed briefly.展开更多
Increasing the rotating speed is considered as an efficient approach to upgrade the power-to-weight ratio in an axial piston pump,but penalized by more leakage and more severe wear resulting from the adverse cylinder ...Increasing the rotating speed is considered as an efficient approach to upgrade the power-to-weight ratio in an axial piston pump,but penalized by more leakage and more severe wear resulting from the adverse cylinder block tilt.Previous studies mainly focused on the bearing characteristic of the valve plate/cylinder block pair,but the spline coupling also plays a key role in the undesired cylinder block tilt,which has been little studied.A theoretical model for the rotating assembly is presented to investigate the effect of the spline coupling length on the cylinder block tilt and the performance of the valve plate/cylinder block pair.A typical high-speed axial piston pump with the displacement of 5.2 mL/r at 10000 r/min was studied by simulation and experiment.It shows that the optimal spline coupling length is one value increased by 2 mm from the original,bringing a remarkable leakage reduction under the high-speed condition by decreasing the cylinder block tilting angle.The experiment result matches well with the simulation.The influences of the spline coupling on the cylinder block tilt and the leakage were demonstrated.展开更多
The interface between the slipper/swash plate is one of the most important frication pairs in axial piston pumps.The test of this interface in a real pump is very challenging.In this paper,a novel pump prototype is de...The interface between the slipper/swash plate is one of the most important frication pairs in axial piston pumps.The test of this interface in a real pump is very challenging.In this paper,a novel pump prototype is designed and a test rig is set up to study the dynamic lubricating performance of the slipper/swash-plate interface in axial piston machines.Such an experimental setup can simulate the operating condition of a real axial piston pump without changing the relative motion relationship of the interfaces.Considering the lubricant oil film thickness as the main measurement parameter,the attitude of the slipper under the conditions of different load pressure,rotation speed and charge pressure are studied experimentally.After the test,the wear state of the swash plate is observed.According to the friction trace on the surface of the swash plate,the prediction for the attitude of the slipper and the zone easy to wear are verified.展开更多
High-pressure axial piston pumps operate in high-speed and high-pressure environments. The contact state of the slipper against the swashplate can easily change from an oil film lubrication to a mixed oil film/asperit...High-pressure axial piston pumps operate in high-speed and high-pressure environments. The contact state of the slipper against the swashplate can easily change from an oil film lubrication to a mixed oil film/asperity contact, or even dry friction. To improve the dry friction performance of slipper pairs and to avoid their potentially rapid failure, this study examined the effects of material matching on the dry friction performance of the slipper pair for high-pressure axial piston pumps. A FAIAX6 friction and wear tester was developed, and the dry friction coefficients of the slipper pairs matched with different materials were studied using this tester. Based on the thermo-mechanical coupling of the slipper pair with the working process, the contact surface temperatures of the slipper pairs matched with different materials were calculated and analyzed for the same working conditions. Following this, the effects of the material properties on the temperature increase at the slipper sliding contact surfaces were revealed. The reliabilities of the temperature calculations and analysis results were verified through orthogonal tests of slipper pairs matched with different materials. The results indicate that the influence of the material density on the friction coefficient is greater than that of the Poisson's ratio or the elastic modulus, and that the slipper material chosen should have a high thermal conductivity, low density, and low specific heat, whereas the swashplate material should be high in specific heat, density, and thermal conductivity;in addition, the slipper pair should be a type of hard material to match the type of soft material applied;that is, the hardness of the swashplate material should be greater than that of the slipper material.展开更多
Axial piston pumps have wide applications in hydraulic systems for power transmission.Their condition monitoring and fault diagnosis are essential in ensuring the safety and reliability of the entire hydraulic system....Axial piston pumps have wide applications in hydraulic systems for power transmission.Their condition monitoring and fault diagnosis are essential in ensuring the safety and reliability of the entire hydraulic system.Vibration and discharge pressure signals are two common signals used for the fault diagnosis of axial piston pumps because of their sensitivity to pump health conditions.However,most of the previous fault diagnosis methods only used vibration or pressure signal,and literatures related to multi-sensor data fusion for the pump fault diagnosis are limited.This paper presents an end-to-end multi-sensor data fusion method for the fault diagnosis of axial piston pumps.The vibration and pressure signals under different pump health conditions are fused into RGB images and then recognized by a convolutional neural network.Experiments were performed on an axial piston pump to confirm the effectiveness of the proposed method.Results show that the proposed multi-sensor data fusion method greatly improves the fault diagnosis of axial piston pumps in terms of accuracy and robustness and has better diagnostic performance than other existing diagnosis methods.展开更多
The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing area.However,the configurations of the unloading and pre-boosting triangular grooves on the spherical...The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing area.However,the configurations of the unloading and pre-boosting triangular grooves on the spherical valve plate are different from those in the planar valve plate,resulting in special cavitation phenomenon on the spherical port plate pair.In order to study cavitation characteristics of spherical port plate pair,a dynamic CFD model of the piston pump including turbulence model,cavitation model and fluid compressibility is established.A detailed UDF compilation scheme is provided for modelling of the micron-sized spherical oil film mesh,which makes up for the lack of research on the meshing of the spherical oil film.In this paper,using CFD simulation tools,from the perspectives of pressure field,velocity field and gas volume fraction change,a detailed analysis of the transient evolution of the submerged cavitation jet in a axial piston pump with spherical valve plate is carried out.The study indicates the movement direction of the cavitation cloud cluster through the cloud image and the velocity vector direction of the observation point.The sharp decrease of velocity and gas volume fraction indicates the collapse phenomenon of bubbles on the part wall surface.These discoveries verify the special erosion effect in case of the spherical valve plate/cylinder block pair.The submerged cavitation jet generated by the unloading triangular grooves distributed on the spherical valve plate not only cause denudation of the inner wall surface of the valve plate,but also cause strong impact and denudation on the lower surface of the cylinder body.Finally,the direction of the unloading triangular groove was modified to extend the distance between it and the wall surface which can effectively alleviate the erosion effect.展开更多
This study investigates tribological performance of MoS2 coating on slipper pair in axial piston pump.Firstly,the MoS2 coating on the surface of slipper pair was prepared by atmospheric plasma spraying treatment techn...This study investigates tribological performance of MoS2 coating on slipper pair in axial piston pump.Firstly,the MoS2 coating on the surface of slipper pair was prepared by atmospheric plasma spraying treatment technology.Secondly,the tribological characteristics of slipper pair under various working conditions were evaluated on ring-on-block tester in oil lubrication.The original and worn surfaces of the specimens were analyzed with scanning electron microscope and energy dispersive spectrometer,and then the wear morphologies of the MoS2 coatings were imaged by X-ray photoelectron spectroscopy.The experimental results showed that the friction coefficients of Cu-based materials with MoS2 coating decreased by about 0.05 at 800 N.Especially,when the external load was set to 800 N,the wear rate of the ZY331608 decreased by about 16.4%after the substrates were treated by the MoS2 coating,which exhibited excellent anti-friction and wear resistance.The formation of the MoS2 lubricating film could be classified into four stages,including the initial friction stage,anchoring stage of MoS2 on friction surface,covering stage of the sliding surface by MoS2 and the formation stage of MoS2 film.The dominating wear mechanisms of Cu-based materials with MoS2 coating were adhesive wear and abrasive wear accompanied with oxidative wear.展开更多
Hydrostatic slipper was often used in friction bearing design, allowing improvement of the latter's dynamic behavior. The influence of thermal effect on hydrostatic slipper bearing capacity of axial piston pump wa...Hydrostatic slipper was often used in friction bearing design, allowing improvement of the latter's dynamic behavior. The influence of thermal effect on hydrostatic slipper bearing capacity of axial piston pump was investigated. A set of lumped parameter mathematical models were developed based on energy conservation law of slipper/ swash plate pair. The results show that thermal equilibrium clearance due to solid thermal deformation periodically changes with shaft rotational angle. The slipper bearing capacity increases dramatically with decreasing thermal equilibrium clearance. In order to improve the slipper bearing capacity, length-to-diameter ratio of fixed damper varies from 3.5 to 8.75 and radius ratio of slipper varies from 1.5 to 2.0. In addition, the higher slipper thermal conductivity is useful to improve slipper bearing capability, but the thermal equilibrium clearance is not compromised.展开更多
A novel performance model of losses of pump was presented,which allows an explicit insight into the losses of various friction pairs of pump.The aim is to clarify that to what extent the hydro-mechanical losses affect...A novel performance model of losses of pump was presented,which allows an explicit insight into the losses of various friction pairs of pump.The aim is to clarify that to what extent the hydro-mechanical losses affect efficiency,and to further gain an insight into the variation and distribution characteristics of hydro-mechanical losses over wide operating ranges.A good agreement is found in the comparisons between simulation and experimental results.At rated speed,the hydro-mechanical losses take a proportion ranging from 87% to 89% and from 68% to 97%,respectively,of the total power losses of pump working under 5 MPa pressure conditions,and 13% of full displacement conditions.Furthermore,within the variation of speed ranging from 48% to 100% of rated speed,and pressure ranging from 14% to 100% of rated pressure,the main sources of hydro-mechanical losses change to slipper swash plate pair and valve plate cylinder pair at low displacement conditions,from the piston cylinder pair and slipper swash plate pair at full displacement conditions.Besides,the hydro-mechanical losses in ball guide retainer pair are found to be almost independent of pressure.The derived conclusions clarify the main orientations of efforts to improve the efficiency performance of pump,and the proposed model can service for the design of pump with higher efficiency performance.展开更多
An axial piston pump is a key component that plays the role of the "heart" in hydraulic systems. The pump failure will lead to an unexpected breakdown of the entire hydraulic system or even economic loss and...An axial piston pump is a key component that plays the role of the "heart" in hydraulic systems. The pump failure will lead to an unexpected breakdown of the entire hydraulic system or even economic loss and catastrophic safety consequences. Several vibration-based machine learning methods have been developed to detect and diagnose faults of axial piston pumps. However,most of these intelligent diagnosis methods use single-sensor vibration data to monitor the pump health states. Additionally, the diagnostic accuracy is unacceptable in most situations due to the complex pump structure and limited sensor information.Therefore, this study proposes a multi-sensor fusion method to improve the fault diagnosis performance of axial piston pumps.The convolutional neural network receives three channels of vibration data and makes the final diagnosis through information fusion at the decision level. The proposed decision fusion method is evaluated on the classification task of leakage levels of an actual axial piston pump. The experimental results show that the proposed method improves the classification accuracy by adjusting the probability distribution of classification according to the learned weight matrix.展开更多
The pressure pulsation of axial piston pump is not only an important cause of rotation speed fluctuation,vibration noise and output stability of the hydraulic system,but also the main information source for obtaining ...The pressure pulsation of axial piston pump is not only an important cause of rotation speed fluctuation,vibration noise and output stability of the hydraulic system,but also the main information source for obtaining fault information.Hydraulic system is characterized by strong noise interference,which leads to low signal-to-noise ratio(SNR)of detection signals.Therefore,it is necessary to dig deep into the system operating state information carried by pressure signals.Firstly,based on flow loss mechanism of the plunger pump,the mapping relationship between flow pulsation and pressure pulsation is analyzed.After that,the pressure signal is filtered and reconstructed based on standard Gabor transform.Finally,according to the time-domain waveform morphology of pressure signal,four characteristic indicators are proposed to analyze the characteristics of pressure fluctuations under different working conditions.The experimental results show that the standard Gabor transform can accurately extract high-order harmonics and phase frequencies of the signal.The reconstructed time-domain waveform of pressure pulsation of the axial piston pump contains a wealth of operating status information,and the characteristics of pulsation changes under various working conditions can provide a new theoretical basis and a method support for fault diagnosis and health assessment of hydraulic pumps,motors and key components.展开更多
Raising the rotational speed of an axial piston pump is useful for improving its power density;however,the churning losses of the piston increase significantly with increasing speed,and this reduces the performance an...Raising the rotational speed of an axial piston pump is useful for improving its power density;however,the churning losses of the piston increase significantly with increasing speed,and this reduces the performance and efficiency of the axial piston pump.Currently,there has been some research on the churning losses of pistons;however,it has rarely been analyzed from the perspective of the piston number.To improve the performance and efficiency of the axial piston pump,a computational fluid dynamics(CFD)simulation model of the churning loss was established,and the effect of piston number on the churning loss was studied in detail.The simulation analysis results revealed that the churning losses initially increased as the number of pistons increased;however,when the number of pistons increased from six to nine,the torque of the churning losses decreased because of the hydrodynamic shadowing effect.In addition,in the analysis of cavitation results,it was determined that the cavitation area of the axial piston pump was mainly concentrated around the piston,and the cavitation became increasingly severe as the speed increased.By comparing the simulation results with and without the cavitation model,it was observed that the cavitation phenomenon is beneficial for the reduction of churning losses.In this study,a piston churning loss test rig that can eliminate other friction losses was established to verify the accuracy of the simulation results.A comparative analysis indicated that the simulation results were consistent with the actual situation.In addition,this study also conducted a simulation study on seven and nine piston pumps with the same displacement.The simulation results revealed that churning losses of the seven pistons were generally greater than those of the nine pistons under the same displacement.In addition,regarding the same piston number and displacement,reducing the pitch circle radius of piston bores is effective in reducing the churning loss.This research analyzes the effect of piston number on the 展开更多
he power density of axial piston pumps can greatly benefit from increasing the speed level.However,traditional slippers in axial piston pumps are exposed to continuous sliding on the swash plate,suffering from serious...he power density of axial piston pumps can greatly benefit from increasing the speed level.However,traditional slippers in axial piston pumps are exposed to continuous sliding on the swash plate,suffering from serious wear at high rotational speeds.Therefore,this paper presents a new integrated slipper retainer mechanism for high-speed axial piston pumps,which can avoid direct contact between the slippers and the swash plate and thereby eliminate slipper wear under severe operating conditions.A lubrication model was developed for this specific slipper retainer mechanism,and experiments were carried out on a pump prototype operating at high rotational speed up to 10000 r/min.Experimental results qualitatively validated the theoretical model and confirmed the effectiveness of the new slipper design.展开更多
The power density of axial piston pumps can benefit greatly from increased rotational speeds.However,the maximum rotational speed of axial piston machines is limited by the cavitation phenomenon for a given volumetric...The power density of axial piston pumps can benefit greatly from increased rotational speeds.However,the maximum rotational speed of axial piston machines is limited by the cavitation phenomenon for a given volumetric displacement.This paper presents a scaling law derived from an analytical cavitation model to estimate the speed limitations for the same series of axial piston pumps.The cavitation model is experimentally verified using a high-speed axial piston pump,and the scaling law is validated with open specification data in product brochures.Results show that the speed limitation is approximately proportional to the square root of the inlet pressure and inversely proportional to the cube root of volumetric displacement.Furthermore,a characteristic constant is defined based on the presented scaling law.This constant can represent the comprehensive capacity of axial piston pumps free from cavitation.展开更多
External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on ...External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on the vector equation of relative-motion velocity of the external return spherical hinge pair under the influence of external swash plate inclination and offset distance.The results show that the total friction,axial leakage flow,and maximum value of the maximum oil-film pressure increase with increasing pump-shaft speed and decrease with increasing offset distance in one working cycle when the external-swash-plate inclination is constant.However,the varying offset distance has little effect on the axial leakage flow.The maximum value of the maximum oil-film pressure decreases with increasing external-swash-plate inclination and the total leakage flow increases with increasing external-swash-plate inclination in one working cycle when the offset distance is constant.It can be seen that the abovementioned parameters are important factors that affect the lubrication characteristics of external return spherical hinge pairs.Therefore,the complex effects of different coupling parameters should be comprehensively considered in the design of the external return mechanism.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 51075360)the National Key Technology R&D Program of the Twelfth Five-year Plan of China (Grant No. 2011BAF09B03)the Fundamental Research Funds for the Central Universities
文摘Improving the carrying ability of oil film between slipper and swash plate and reducing the partial abrasion of slipper are important to improve the service life and reliability of axial piston pump.In this paper,a numerical simulation model was developed for slipper/swash-plate friction pair based on the elastohydrodynamic theory.The dynamic micro-motion and pressure distribution of slipper were analyzed and it was pointed out that the tilt of slipper was the main reason for its partial abrasion.The simulations about the slippers with different slopes on the outer edge of the sealing belt showed that the partial abrasion could reduce the carrying ability and increase the leakage of the slipper/swash-plate pair.The proper slope on the inner edge helped to improve the carrying ability and reduce the leakage of slipper.The experimental tests were in accord with the simulation results to a great extent,showing that the simulation model had a high accuracy and could be applied to the design and optimization of slipper,and that the slipper with optimal inner slope provided an encouraging method to improve the efficiency and reliability of axial piston pump.
基金the support of the National Natural Science Foundation of China (No. 51235002)the National Science Foundation for Distinguished Young Scholars (No. 50825502)
文摘Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple, a single-piston model of the aviation axial-piston pump is presented. This sin- gle-piston model comprehensively considers fluid compressibility, orifice restriction effect, fluid resistance in the capillary tube, and the leakage flow. Besides, the instantaneous discharge areas used in the single-piston model have been calculated in detail. Based on the single-piston model, a multi-piston pump model has been established according to the simple hydraulic circuit. The sin- gle- and multi-piston pump models have been realized by the S-function in Matlab/Simulink. The developed multi-piston pump model has been validated by being compared with the numerical result by computational fluid dynamic （CFD）. The effects of the pre-pressurization fluid path on the flow ripple and the instantaneous pressure in the piston chamber have been studied and opti- mized design recommendations for the aviation axial-piston pump have been given out.
基金Supported by National Basic Research Program of China(Grant No.2014CB046403)Zhejiang Provincial Natural Science Foundation of China(Grant No.LQ14E050005)
文摘Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However,air?release and cavitation can occur near the grooves. The valve plate utilizing damping holes show excellent perfor?mance in avoiding air?release and cavitation. This study aims to reduce the noise emitted from an axial piston pump using a novel valve plate utilizing damping holes. A dynamic pump model is developed,in which the fluid properties are carefully modeled to capture the phenomena of air release and cavitation. The causes of di erent noise sources are investigated using the model. A comprehensive parametric analysis is conducted to enhance the understanding of the e ects of the valve plate parameters on the noise sources. A multi?objective genetic algorithm optimization method is proposed to optimize the parameters of valve plate. The amplitudes of the swash plate moment and flow rates in the inlet and outlet ports are defined as the objective functions. The pressure overshoot and undershoot in the piston chamber are limited by properly constraining the highest and lowest pressure values. A comparison of the various noise sources between the original and optimized designs over a wide range of pressure levels shows that the noise sources are reduced at high pressures. The results of the sound pressure level measurements show that the optimized valve plate reduces the noise level by 1.6 d B(A) at the rated working condition. The proposed method is e ective in reducing the noise of axial piston pumps and contributes to the development of quieter axial piston machines.
基金the National Basic Research Program (973 Program) of China，the Science Fund for Creative Research Groups of the National Natural Science Foundation of China
文摘The optimization of the valve plate transition region is an important way of reducing the noise emission for an axial piston pump. However, the optimized methods through simulation or experiment are actually trial and error, and they cannot indicate the precise structural parameters of the valve plate transition region. In this study, a new design method for the transition region of valve plate based on the matching of flow area and reduction of transient reverse flow was proposed, and with which a valve plate was designed. Then, the impact of the flow ripple in the discharge line of an axial piston pump and the pressure overshoot and undershoot in the piston chamber on hydraulic and structural noise for axial piston pump is discussed. The noise reduction effect of the axial piston pump with this valve plate was analyzed by adopting a flow characteristic simulation model. Finally, the results showed that the application of this design method could contribute much to the reduction of the flow ripple and elimination of the pressure overshoot and undershoot. As a consequence, the method can be used in the design of a low-noise open circuit axial piston pump.
基金supported by Chinese Civil Aircraft Project [No. MJ-2017-S49]China National Postdoctoral Program for Innovative Talents [No. BX20200210]China Postdoctoral Science Foundation [No. 2019M660086]。
文摘Axial piston pumps have been widely used in aircraft hydraulic systems to supply the system with pressurized fluid. The continuous improvement of the aircraft performance has put forward the demand on aviation piston pumps for high power density, safety, and reliability. The lubricating interfaces in axial piston machines are the key design issue that greatly determines the pump performance and service life. The cylinder block/valve plate interface is one of these critical lubricating interfaces and has received considerable attention from many researchers in the last half century. This study aims to review the state-of-the-art literature on the cylinder block/valve plate interface comprehensively and systematically. First, we introduce various theoretical models developed to investigate the lubrication behaviors of the interface and compare them in terms of their assumptions and limitations. Second, the experimental studies on the cylinder block/valve plate interface are presented comprehensively, where the involved test rigs are divided into three types according to their fidelity levels and measurement functionality. Third, we summarize some typical approaches of structure optimization, surface shaping, and surface strengthening, which help improve the load-carrying and anti-wear capacities of the interface under severe operating conditions. Finally, the challenges and future trends of the cylinder block/valve plate interface research are discussed briefly.
基金This study was co-supported by the National Key R&D Program of China(No.2019YFB2005101)National Outstanding Youth Science Foundation of China(No.51922093)+2 种基金the National Natural Science Foundation of China(No.52105075)the National Natural Science Foundation of China(No.51890882)the Natural Science Foundation of Zhejiang Province(No.LQ21E050022).
文摘Increasing the rotating speed is considered as an efficient approach to upgrade the power-to-weight ratio in an axial piston pump,but penalized by more leakage and more severe wear resulting from the adverse cylinder block tilt.Previous studies mainly focused on the bearing characteristic of the valve plate/cylinder block pair,but the spline coupling also plays a key role in the undesired cylinder block tilt,which has been little studied.A theoretical model for the rotating assembly is presented to investigate the effect of the spline coupling length on the cylinder block tilt and the performance of the valve plate/cylinder block pair.A typical high-speed axial piston pump with the displacement of 5.2 mL/r at 10000 r/min was studied by simulation and experiment.It shows that the optimal spline coupling length is one value increased by 2 mm from the original,bringing a remarkable leakage reduction under the high-speed condition by decreasing the cylinder block tilting angle.The experiment result matches well with the simulation.The influences of the spline coupling on the cylinder block tilt and the leakage were demonstrated.
基金Supported by Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(Grant No.201718).
文摘The interface between the slipper/swash plate is one of the most important frication pairs in axial piston pumps.The test of this interface in a real pump is very challenging.In this paper,a novel pump prototype is designed and a test rig is set up to study the dynamic lubricating performance of the slipper/swash-plate interface in axial piston machines.Such an experimental setup can simulate the operating condition of a real axial piston pump without changing the relative motion relationship of the interfaces.Considering the lubricant oil film thickness as the main measurement parameter,the attitude of the slipper under the conditions of different load pressure,rotation speed and charge pressure are studied experimentally.After the test,the wear state of the swash plate is observed.According to the friction trace on the surface of the swash plate,the prediction for the attitude of the slipper and the zone easy to wear are verified.
基金This project was supported by the National Key Basic Research Program of China(973 Program,2014CB046404)training plan for high-level innovative talent in Guizhou province(Grant No.Q.K.H.P.T.R.C[2016]5659)+2 种基金preferred project of scientific and technological activities for personnel studying abroad in Guizhou province(Grant No.Q.R.X.M.Z.Z.H.T[2018]0001)science and technology planning project in Guizhou Province(Grant No.Q.K.H.P.T.R.C[2017]5788)key research project on Innovation group of Guizhou Provincial Education Department(Grant No.Q.J.H.KY Z.[2018]011).
文摘High-pressure axial piston pumps operate in high-speed and high-pressure environments. The contact state of the slipper against the swashplate can easily change from an oil film lubrication to a mixed oil film/asperity contact, or even dry friction. To improve the dry friction performance of slipper pairs and to avoid their potentially rapid failure, this study examined the effects of material matching on the dry friction performance of the slipper pair for high-pressure axial piston pumps. A FAIAX6 friction and wear tester was developed, and the dry friction coefficients of the slipper pairs matched with different materials were studied using this tester. Based on the thermo-mechanical coupling of the slipper pair with the working process, the contact surface temperatures of the slipper pairs matched with different materials were calculated and analyzed for the same working conditions. Following this, the effects of the material properties on the temperature increase at the slipper sliding contact surfaces were revealed. The reliabilities of the temperature calculations and analysis results were verified through orthogonal tests of slipper pairs matched with different materials. The results indicate that the influence of the material density on the friction coefficient is greater than that of the Poisson's ratio or the elastic modulus, and that the slipper material chosen should have a high thermal conductivity, low density, and low specific heat, whereas the swashplate material should be high in specific heat, density, and thermal conductivity;in addition, the slipper pair should be a type of hard material to match the type of soft material applied;that is, the hardness of the swashplate material should be greater than that of the slipper material.
基金This study was supported by the National Key R&D Program of China(Grant No.2018YFB1702503)the Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems,China(Grant No.GZKF-202108)+2 种基金the National Postdoctoral Program for Innovative Talents,China(Grant No.BX20200210)the China Postdoctoral Science Foundation(Grant No.2019M660086)Shanghai Municipal Science and Technology Major Project,China(Grant No.2021SHZDZX0102).
文摘Axial piston pumps have wide applications in hydraulic systems for power transmission.Their condition monitoring and fault diagnosis are essential in ensuring the safety and reliability of the entire hydraulic system.Vibration and discharge pressure signals are two common signals used for the fault diagnosis of axial piston pumps because of their sensitivity to pump health conditions.However,most of the previous fault diagnosis methods only used vibration or pressure signal,and literatures related to multi-sensor data fusion for the pump fault diagnosis are limited.This paper presents an end-to-end multi-sensor data fusion method for the fault diagnosis of axial piston pumps.The vibration and pressure signals under different pump health conditions are fused into RGB images and then recognized by a convolutional neural network.Experiments were performed on an axial piston pump to confirm the effectiveness of the proposed method.Results show that the proposed multi-sensor data fusion method greatly improves the fault diagnosis of axial piston pumps in terms of accuracy and robustness and has better diagnostic performance than other existing diagnosis methods.
基金Supported by National Natural Science Foundation of China(Grant No.51605322)Shanxi Provincial Natural Science Foundation of China(Grant No.201901D111054)+1 种基金International Cooperation Project of Shanxi Province(Grant No.2016-002)Key Laboratory of Fluid and Power Machinery,Ministry of Education(Grant No.GZKF-201815).
文摘The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing area.However,the configurations of the unloading and pre-boosting triangular grooves on the spherical valve plate are different from those in the planar valve plate,resulting in special cavitation phenomenon on the spherical port plate pair.In order to study cavitation characteristics of spherical port plate pair,a dynamic CFD model of the piston pump including turbulence model,cavitation model and fluid compressibility is established.A detailed UDF compilation scheme is provided for modelling of the micron-sized spherical oil film mesh,which makes up for the lack of research on the meshing of the spherical oil film.In this paper,using CFD simulation tools,from the perspectives of pressure field,velocity field and gas volume fraction change,a detailed analysis of the transient evolution of the submerged cavitation jet in a axial piston pump with spherical valve plate is carried out.The study indicates the movement direction of the cavitation cloud cluster through the cloud image and the velocity vector direction of the observation point.The sharp decrease of velocity and gas volume fraction indicates the collapse phenomenon of bubbles on the part wall surface.These discoveries verify the special erosion effect in case of the spherical valve plate/cylinder block pair.The submerged cavitation jet generated by the unloading triangular grooves distributed on the spherical valve plate not only cause denudation of the inner wall surface of the valve plate,but also cause strong impact and denudation on the lower surface of the cylinder body.Finally,the direction of the unloading triangular groove was modified to extend the distance between it and the wall surface which can effectively alleviate the erosion effect.
基金Project(51805376)supported by the National Natural Science Foundation of ChinaProject(LQ17E050003)supported by the Zhejiang Provincial Natural Science Foundation of China+1 种基金Project(GZKF-201719)supported by the Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems,ChinaProject(G20180019)supported by the Basic Scientific Research Projects Foundation of Wenzhou,China。
文摘This study investigates tribological performance of MoS2 coating on slipper pair in axial piston pump.Firstly,the MoS2 coating on the surface of slipper pair was prepared by atmospheric plasma spraying treatment technology.Secondly,the tribological characteristics of slipper pair under various working conditions were evaluated on ring-on-block tester in oil lubrication.The original and worn surfaces of the specimens were analyzed with scanning electron microscope and energy dispersive spectrometer,and then the wear morphologies of the MoS2 coatings were imaged by X-ray photoelectron spectroscopy.The experimental results showed that the friction coefficients of Cu-based materials with MoS2 coating decreased by about 0.05 at 800 N.Especially,when the external load was set to 800 N,the wear rate of the ZY331608 decreased by about 16.4%after the substrates were treated by the MoS2 coating,which exhibited excellent anti-friction and wear resistance.The formation of the MoS2 lubricating film could be classified into four stages,including the initial friction stage,anchoring stage of MoS2 on friction surface,covering stage of the sliding surface by MoS2 and the formation stage of MoS2 film.The dominating wear mechanisms of Cu-based materials with MoS2 coating were adhesive wear and abrasive wear accompanied with oxidative wear.
基金Projects(51475332,51275356)supported by the National Natural Science Foundation of China
文摘Hydrostatic slipper was often used in friction bearing design, allowing improvement of the latter's dynamic behavior. The influence of thermal effect on hydrostatic slipper bearing capacity of axial piston pump was investigated. A set of lumped parameter mathematical models were developed based on energy conservation law of slipper/ swash plate pair. The results show that thermal equilibrium clearance due to solid thermal deformation periodically changes with shaft rotational angle. The slipper bearing capacity increases dramatically with decreasing thermal equilibrium clearance. In order to improve the slipper bearing capacity, length-to-diameter ratio of fixed damper varies from 3.5 to 8.75 and radius ratio of slipper varies from 1.5 to 2.0. In addition, the higher slipper thermal conductivity is useful to improve slipper bearing capability, but the thermal equilibrium clearance is not compromised.
基金Project(2014CB046403)supported by the National Basic Research Program of ChinaProject(2013BAF07B01)supported by the National Key Technology R&D Program of China
文摘A novel performance model of losses of pump was presented,which allows an explicit insight into the losses of various friction pairs of pump.The aim is to clarify that to what extent the hydro-mechanical losses affect efficiency,and to further gain an insight into the variation and distribution characteristics of hydro-mechanical losses over wide operating ranges.A good agreement is found in the comparisons between simulation and experimental results.At rated speed,the hydro-mechanical losses take a proportion ranging from 87% to 89% and from 68% to 97%,respectively,of the total power losses of pump working under 5 MPa pressure conditions,and 13% of full displacement conditions.Furthermore,within the variation of speed ranging from 48% to 100% of rated speed,and pressure ranging from 14% to 100% of rated pressure,the main sources of hydro-mechanical losses change to slipper swash plate pair and valve plate cylinder pair at low displacement conditions,from the piston cylinder pair and slipper swash plate pair at full displacement conditions.Besides,the hydro-mechanical losses in ball guide retainer pair are found to be almost independent of pressure.The derived conclusions clarify the main orientations of efforts to improve the efficiency performance of pump,and the proposed model can service for the design of pump with higher efficiency performance.
基金supported by the National Key R&D Program of China(Grant No.2020YFB2007202)the National Natural Science Foundation of China(Grant No.52005323)+1 种基金the National Postdoctoral Program for Innovative Talents(Grant No.BX20200210)the China Postdoctoral Science Foundation(Grant No.2019M660086)。
文摘An axial piston pump is a key component that plays the role of the "heart" in hydraulic systems. The pump failure will lead to an unexpected breakdown of the entire hydraulic system or even economic loss and catastrophic safety consequences. Several vibration-based machine learning methods have been developed to detect and diagnose faults of axial piston pumps. However,most of these intelligent diagnosis methods use single-sensor vibration data to monitor the pump health states. Additionally, the diagnostic accuracy is unacceptable in most situations due to the complex pump structure and limited sensor information.Therefore, this study proposes a multi-sensor fusion method to improve the fault diagnosis performance of axial piston pumps.The convolutional neural network receives three channels of vibration data and makes the final diagnosis through information fusion at the decision level. The proposed decision fusion method is evaluated on the classification task of leakage levels of an actual axial piston pump. The experimental results show that the proposed method improves the classification accuracy by adjusting the probability distribution of classification according to the learned weight matrix.
基金National Natural Science Foundation of China(No.51675399)。
文摘The pressure pulsation of axial piston pump is not only an important cause of rotation speed fluctuation,vibration noise and output stability of the hydraulic system,but also the main information source for obtaining fault information.Hydraulic system is characterized by strong noise interference,which leads to low signal-to-noise ratio(SNR)of detection signals.Therefore,it is necessary to dig deep into the system operating state information carried by pressure signals.Firstly,based on flow loss mechanism of the plunger pump,the mapping relationship between flow pulsation and pressure pulsation is analyzed.After that,the pressure signal is filtered and reconstructed based on standard Gabor transform.Finally,according to the time-domain waveform morphology of pressure signal,four characteristic indicators are proposed to analyze the characteristics of pressure fluctuations under different working conditions.The experimental results show that the standard Gabor transform can accurately extract high-order harmonics and phase frequencies of the signal.The reconstructed time-domain waveform of pressure pulsation of the axial piston pump contains a wealth of operating status information,and the characteristics of pulsation changes under various working conditions can provide a new theoretical basis and a method support for fault diagnosis and health assessment of hydraulic pumps,motors and key components.
基金National Natural Science Foundation of China(Grant No.52005429)Open Foundation of State Key Laboratory of Fluid Power and Mechatronic Systems of China(Grant No.GZKF-201911)National Key Research and Development Program of China(Grant No.2018YFB2000703).
文摘Raising the rotational speed of an axial piston pump is useful for improving its power density;however,the churning losses of the piston increase significantly with increasing speed,and this reduces the performance and efficiency of the axial piston pump.Currently,there has been some research on the churning losses of pistons;however,it has rarely been analyzed from the perspective of the piston number.To improve the performance and efficiency of the axial piston pump,a computational fluid dynamics(CFD)simulation model of the churning loss was established,and the effect of piston number on the churning loss was studied in detail.The simulation analysis results revealed that the churning losses initially increased as the number of pistons increased;however,when the number of pistons increased from six to nine,the torque of the churning losses decreased because of the hydrodynamic shadowing effect.In addition,in the analysis of cavitation results,it was determined that the cavitation area of the axial piston pump was mainly concentrated around the piston,and the cavitation became increasingly severe as the speed increased.By comparing the simulation results with and without the cavitation model,it was observed that the cavitation phenomenon is beneficial for the reduction of churning losses.In this study,a piston churning loss test rig that can eliminate other friction losses was established to verify the accuracy of the simulation results.A comparative analysis indicated that the simulation results were consistent with the actual situation.In addition,this study also conducted a simulation study on seven and nine piston pumps with the same displacement.The simulation results revealed that churning losses of the seven pistons were generally greater than those of the nine pistons under the same displacement.In addition,regarding the same piston number and displacement,reducing the pitch circle radius of piston bores is effective in reducing the churning loss.This research analyzes the effect of piston number on the
基金This work was supported by the National Key R&D Program of China(Grant No.2019YFB2004504)the National Natural Science Foundation of China(Grant No.52005323)+2 种基金the National Outstanding Youth Science Foundation of China(Grant No.51922093)the China National Postdoctoral Program for Innovative Talents(Grant No.BX20200210)the China Postdoctoral Science Foundation(Grant No.2019M660086).The。
文摘he power density of axial piston pumps can greatly benefit from increasing the speed level.However,traditional slippers in axial piston pumps are exposed to continuous sliding on the swash plate,suffering from serious wear at high rotational speeds.Therefore,this paper presents a new integrated slipper retainer mechanism for high-speed axial piston pumps,which can avoid direct contact between the slippers and the swash plate and thereby eliminate slipper wear under severe operating conditions.A lubrication model was developed for this specific slipper retainer mechanism,and experiments were carried out on a pump prototype operating at high rotational speed up to 10000 r/min.Experimental results qualitatively validated the theoretical model and confirmed the effectiveness of the new slipper design.
基金supported by the China National Postdoctoral Program for Innovative Talents(Grant No.BX20200210)the China Postdoctoral Science Foundation(Grant No.2019M660086)the Common Technology for Equipment Pre-research Project(Grant No.41402050202).
文摘The power density of axial piston pumps can benefit greatly from increased rotational speeds.However,the maximum rotational speed of axial piston machines is limited by the cavitation phenomenon for a given volumetric displacement.This paper presents a scaling law derived from an analytical cavitation model to estimate the speed limitations for the same series of axial piston pumps.The cavitation model is experimentally verified using a high-speed axial piston pump,and the scaling law is validated with open specification data in product brochures.Results show that the speed limitation is approximately proportional to the square root of the inlet pressure and inversely proportional to the cube root of volumetric displacement.Furthermore,a characteristic constant is defined based on the presented scaling law.This constant can represent the comprehensive capacity of axial piston pumps free from cavitation.
基金Project(GXXT-2019-048)supported by the University Synergy Innovation Program of Anhui Province,ChinaProject(51575002)supported by the National Natural Science Foundation of ChinaProject(gxbj ZD11)supported by the Top-Notch Talent Program of University(Profession)in Anhui Province,China。
文摘External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on the vector equation of relative-motion velocity of the external return spherical hinge pair under the influence of external swash plate inclination and offset distance.The results show that the total friction,axial leakage flow,and maximum value of the maximum oil-film pressure increase with increasing pump-shaft speed and decrease with increasing offset distance in one working cycle when the external-swash-plate inclination is constant.However,the varying offset distance has little effect on the axial leakage flow.The maximum value of the maximum oil-film pressure decreases with increasing external-swash-plate inclination and the total leakage flow increases with increasing external-swash-plate inclination in one working cycle when the offset distance is constant.It can be seen that the abovementioned parameters are important factors that affect the lubrication characteristics of external return spherical hinge pairs.Therefore,the complex effects of different coupling parameters should be comprehensively considered in the design of the external return mechanism.
