Gradient slope, aspect slope, profiling and contourlines are important topographic parameters that can be derived from digital elevation data obtained from different sources with exploitation of different interpolatio...Gradient slope, aspect slope, profiling and contourlines are important topographic parameters that can be derived from digital elevation data obtained from different sources with exploitation of different interpolation techniques. Geostatistical interpolation methods such as ordinary kriging models constitute reliable alternatives to deterministic approaches in creation of continuous surface models from discrete elevation data. This research aimed at extraction, analysis, and evaluation of different terrain parameters elevation measurements with the use of different ordinary kriging models including the linear model, the circular model, the spherical model, the exponential models, and the Gaussian model. Different ordinary kriging models under ESRI ArcView 3.3 package along with its 3D analyst and Spatial analysis extensions have been exploited in extraction of gradient slope maps, aspect slope maps, and hillshade maps in addition to contourline maps from a sample of elevation data. Visual analysis of the gradient slope maps shows great similarities between the slope maps from the linear, circular, spherical, and exponential OK models, however, that from OK Gaussian models look very different as different sizes and arrangements of the colour patches, referring to different tones and different textures where smooth tones and smooth textures dominate the gradient slope map from the OK Gaussian model. Thus, gradient slope degradation and smoothing are considerably high in the gradient slope map from Gaussian model compared to the slope maps from the other four OK models. Also, the mean slope in the Gaussian model records the lowest value with the lowest value of the standard deviation of slopes in the same map reflecting less structured and highly smoothed gradient slope map compared to the slope maps from the other OK models. Thus, similar sizes of the colour patches and similar tones and similar texture dominate the different aspect slope maps. This is not the case in Figure 2(e) which depicts the aspect slope map展开更多
[Objective] The aim was to study the effect of site factor on plant community characteristic in closed watershed in loess hilly and gully region.[Method] Based on the investigation of vegetation in the closed watershe...[Objective] The aim was to study the effect of site factor on plant community characteristic in closed watershed in loess hilly and gully region.[Method] Based on the investigation of vegetation in the closed watershed of Wuqi County in Shaanxi Province,the difference of plant community characteristic and species diversity under various site types was researched in our paper.[Result] In the investigation area,xerophytic herb was the main community,with sole species composition and simple community structure.Zonal vegetations were Artemisia sacrorum and Artemisia giraldii community;for plant diversity,the order of diversity index was ridge topgully bottomridge slopegully slope in various landform positions and semi-shady slopeshady slopesemi-sunny slopesunny slope in various slope aspects;with the increase of gradient,the diversity index of sunny slope changed with ＂S＂ type,and it reached maximum value at 37°.[Conclusion] Our study could provide theoretical foundation for vegetative restoration in loess hilly and gully region.展开更多
The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mas...The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mass density is the main cause for the occurrence of non-homogeneity in plate’s material. In this consideration, density varies linearly in one direction. The governing differential equations have been derived by Rayleigh-Ritz method in order to attain fundamental frequencies. With C-S-C-S boundary condition, a two term deflection function has been considered. The effect of structural parameters such as taper constants, thermal gradient, aspect ratio and non-homogeneity constant has been investigated for first two modes of vibration. The obtained numerical results have been presented in tabular and graphical form.展开更多
The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear alon...The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear along the length of the plate. Non-homogeneity in plate arises due to variation in density along the length of the plate. The two-term deflection function with clamped-simply supported-clamped-simply supported boundary condition is taken into consideration. The effect of structural parameters such as taper constants, thermal gradient, non-homogeneity constant and aspect ratio has been studied. Rayleigh-Ritz method is used to solve the governing differential equations and to obtain the fundamental frequencies for the first two modes of vibration. Results are presented in graphical form.展开更多
High quality gold nanorods （NRs） with a monodisperse size and aspect ratio are essential for many applications. Here, we describe how nearly monodisperse gold NRs can be separated from polydisperse samples using den...High quality gold nanorods （NRs） with a monodisperse size and aspect ratio are essential for many applications. Here, we describe how nearly monodisperse gold NRs can be separated from polydisperse samples using density gradient ultracentrifugation. Size and dimension analysis by transmission electron microscopy （TEM） and absorption spectroscopy revealed that the Au NRs were separated mainly as a function of their aspect ratio The surface-enhanced Raman scattering （SERS） activity of Au NRs with lower aspect ratio is notably stronger than that of NRs with higher aspect ratio under 633 nm laser excitation, due to the size-dependent absorption of the longitudinal plasmon band. The separation approach provides a method to improve the quality of NRs produced by large scale synthetic methods.展开更多
文摘Gradient slope, aspect slope, profiling and contourlines are important topographic parameters that can be derived from digital elevation data obtained from different sources with exploitation of different interpolation techniques. Geostatistical interpolation methods such as ordinary kriging models constitute reliable alternatives to deterministic approaches in creation of continuous surface models from discrete elevation data. This research aimed at extraction, analysis, and evaluation of different terrain parameters elevation measurements with the use of different ordinary kriging models including the linear model, the circular model, the spherical model, the exponential models, and the Gaussian model. Different ordinary kriging models under ESRI ArcView 3.3 package along with its 3D analyst and Spatial analysis extensions have been exploited in extraction of gradient slope maps, aspect slope maps, and hillshade maps in addition to contourline maps from a sample of elevation data. Visual analysis of the gradient slope maps shows great similarities between the slope maps from the linear, circular, spherical, and exponential OK models, however, that from OK Gaussian models look very different as different sizes and arrangements of the colour patches, referring to different tones and different textures where smooth tones and smooth textures dominate the gradient slope map from the OK Gaussian model. Thus, gradient slope degradation and smoothing are considerably high in the gradient slope map from Gaussian model compared to the slope maps from the other four OK models. Also, the mean slope in the Gaussian model records the lowest value with the lowest value of the standard deviation of slopes in the same map reflecting less structured and highly smoothed gradient slope map compared to the slope maps from the other OK models. Thus, similar sizes of the colour patches and similar tones and similar texture dominate the different aspect slope maps. This is not the case in Figure 2(e) which depicts the aspect slope map
基金Supported by Forestry Key Technology R&D Program in the 11th Five year Plan of China(2006BAD03A0302)~~
文摘[Objective] The aim was to study the effect of site factor on plant community characteristic in closed watershed in loess hilly and gully region.[Method] Based on the investigation of vegetation in the closed watershed of Wuqi County in Shaanxi Province,the difference of plant community characteristic and species diversity under various site types was researched in our paper.[Result] In the investigation area,xerophytic herb was the main community,with sole species composition and simple community structure.Zonal vegetations were Artemisia sacrorum and Artemisia giraldii community;for plant diversity,the order of diversity index was ridge topgully bottomridge slopegully slope in various landform positions and semi-shady slopeshady slopesemi-sunny slopesunny slope in various slope aspects;with the increase of gradient,the diversity index of sunny slope changed with ＂S＂ type,and it reached maximum value at 37°.[Conclusion] Our study could provide theoretical foundation for vegetative restoration in loess hilly and gully region.
文摘The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mass density is the main cause for the occurrence of non-homogeneity in plate’s material. In this consideration, density varies linearly in one direction. The governing differential equations have been derived by Rayleigh-Ritz method in order to attain fundamental frequencies. With C-S-C-S boundary condition, a two term deflection function has been considered. The effect of structural parameters such as taper constants, thermal gradient, aspect ratio and non-homogeneity constant has been investigated for first two modes of vibration. The obtained numerical results have been presented in tabular and graphical form.
文摘The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear along the length of the plate. Non-homogeneity in plate arises due to variation in density along the length of the plate. The two-term deflection function with clamped-simply supported-clamped-simply supported boundary condition is taken into consideration. The effect of structural parameters such as taper constants, thermal gradient, non-homogeneity constant and aspect ratio has been studied. Rayleigh-Ritz method is used to solve the governing differential equations and to obtain the fundamental frequencies for the first two modes of vibration. Results are presented in graphical form.
基金Acknowledgements This work was financially supported by the National Natural Science Foundation of China （NSFC）, Beijing Natural Science Foundation （No. 2102033）, the Programfor New Century Excellent Talents in Universities, and the 973 Program （No. 2009CB939801）.
文摘High quality gold nanorods （NRs） with a monodisperse size and aspect ratio are essential for many applications. Here, we describe how nearly monodisperse gold NRs can be separated from polydisperse samples using density gradient ultracentrifugation. Size and dimension analysis by transmission electron microscopy （TEM） and absorption spectroscopy revealed that the Au NRs were separated mainly as a function of their aspect ratio The surface-enhanced Raman scattering （SERS） activity of Au NRs with lower aspect ratio is notably stronger than that of NRs with higher aspect ratio under 633 nm laser excitation, due to the size-dependent absorption of the longitudinal plasmon band. The separation approach provides a method to improve the quality of NRs produced by large scale synthetic methods.
