This study aims to investigate mechanical properties and failure mechanisms of layered rock with rough joint surfaces under direct shear loading.Cubic layered samples with dimensions of 100 mm×100 mm×100 mm ...This study aims to investigate mechanical properties and failure mechanisms of layered rock with rough joint surfaces under direct shear loading.Cubic layered samples with dimensions of 100 mm×100 mm×100 mm were casted using rock-like materials,with anisotropic angle(α)and joint roughness coefficient(JRC)ranging from 15°to 75°and 2-20,respectively.The direct shear tests were conducted under the application of initial normal stress(σ_(n))ranging from 1-4 MPa.The test results indicate significant differences in mechanical properties,acoustic emission(AE)responses,maximum principal strain fields,and ultimate failure modes of layered samples under different test conditions.The peak stress increases with the increasingαand achieves a maximum value atα=60°or 75°.Asσ_(n)increases,the peak stress shows an increasing trend,with correlation coefficients R²ranging from 0.918 to 0.995 for the linear least squares fitting.As JRC increases from 2-4 to 18-20,the cohesion increases by 86.32%whenα=15°,while the cohesion decreases by 27.93%whenα=75°.The differences in roughness characteristics of shear failure surface induced byαresult in anisotropic post-peak AE responses,which is characterized by active AE signals whenαis small and quiet AE signals for a largeα.For a given JRC=6-8 andσ_(n)=1 MPa,asαincreases,the accumulative AE counts increase by 224.31%(αincreased from 15°to 60°),and then decrease by 14.68%(αincreased from 60°to 75°).The shear failure surface is formed along the weak interlayer whenα=15°and penetrates the layered matrix whenα=60°.Whenα=15°,asσ_(n)increases,the adjacent weak interlayer induces a change in the direction of tensile cracks propagation,resulting in a stepped pattern of cracks distribution.The increase in JRC intensifies roughness characteristics of shear failure surface for a smallα,however,it is not pronounced for a largeα.The findings will contribute to a better understanding of the mechanical responses and failure mechanisms of the layered rocks subjected to sh展开更多
The anisotropy induced by rock bedding structures is usually manifested in the mechanical behaviors and failure modes of rocks.Brazilian tests are conducted for seven groups of shale specimens featuring different bedd...The anisotropy induced by rock bedding structures is usually manifested in the mechanical behaviors and failure modes of rocks.Brazilian tests are conducted for seven groups of shale specimens featuring different bedding angles. Acoustic emission (AE) and digital image correlation (DIC) technologies are used to monitor the in-situ failure of the specimens. Furthermore, the crack morphology of damaged samples is observed through scanning electron microscopy (SEM). Results reveal the structural dependence on the tensile mechanical behavior of shales. The shale disk exhibits compression in the early stage of the experiment with varying locations and durations. The location of the compression area moves downward and gradually disappears when the bedding angle increases. The macroscopic failure is well characterized by AE event location results, and the dominant frequency distribution is related to the bedding angle. The b-value is found to be stress-dependent.The crack turning angle between layers and the number of cracks crossing the bedding both increase with the bedding angle, indicating competition between crack propagations. SEM results revealed that the failure modes of the samples can be classified into three types:tensile failure along beddings with shear failure of the matrix, ladder shear failure along beddings with tensile failure of the matrix, and shear failure along multiple beddings with tensile failure of the matrix.展开更多
Layered backfill is commonly used in mining operations,and its mechanical behavior is strongly influenced by delamination parameters.In this study,13 specimens with different numbers of delamination and delamination a...Layered backfill is commonly used in mining operations,and its mechanical behavior is strongly influenced by delamination parameters.In this study,13 specimens with different numbers of delamination and delamination angle were prepared to investigate the anisotropic mechanical behavior,energy dissipation characteristics and crack development of backfill.P-wave velocity,uniaxial compression,scanning electron microscope(SEM),and acoustic emission(AE)experiments were conducted.The results indicate that:(1)The P-wave velocity has linear and elliptical relationships with the number of delamination surface and delamination angle,respectively;the strength,delamination parameters and P-wave velocity show a high degree of coincidence in terms of their function relationship,which can realize the rapid prediction of strength.(2)The microstructure of the delaminated surface is looser than that of the matrix,leading to a decrease in strength and an increase at the pore-fissure compaction stage.The number and angle of delamination increase linearly with the anisotropy coefficient.(3)The energy evolution in angle-cut backfill can be divided into four stages,with a decrease in the proportion of elastic energy at the initiation stress and peak stress with increasing number of delamination planes and delamination angle.(4)Crack development increases with the number of delamination surface and delamination angle,resulting in a decrease in energy dissipation coefficient and peak AE energy.These findings provide valuable insights for the design of filling materials and processes in mining operations.展开更多
Controllable anisotropic growth of perovskite nanocrystals(NCs)is challenging since it is difficult to separate the nucleation and growth processes.Here,a two-step nucleation strategy is proposed to control the bindin...Controllable anisotropic growth of perovskite nanocrystals(NCs)is challenging since it is difficult to separate the nucleation and growth processes.Here,a two-step nucleation strategy is proposed to control the binding interaction between surface ligands and NCs,resulting in facet-induced coordination competition.Oleic acid as surface activated ligand leads to the formation of defective lead bromine octahedron,and the binding interaction between 4-dodecylbenzenesulfonic acid and lead atoms promotes the formation of two kinds of binding interactions.Based on this strategy,the anisotropic growth of CsPbBr_(3) nanoplatelet(NPLs)with adjusted length from 11.4 to 24 nm,and the evolution of NPLs from stacked to tongue-shaped have been realized.Elemental line scan reveals the sulfur atoms mainly distribute at the edge of NPLs.Furthermore,binding energy calculation and experimental results illustrate the coordination competition of different binding interaction on specific facets induces the anisotropic growth of NPLs.Importantly,strong emission anisotropy of highly ordered NPLs with polarization ratio up to 0.58 is illustrated.This work not only deepens our understanding of the controllable synthesis of perovskite NCs,but also provides a reference for the regulation of light emitting diode and soler cells.展开更多
Angular distributions of pious and kaons produced in heavy ion collisions at the low-energy end of high energies （1-2 A GeV） have been investigated by using a multisource ideal gas model. The model covers the expans...Angular distributions of pious and kaons produced in heavy ion collisions at the low-energy end of high energies （1-2 A GeV） have been investigated by using a multisource ideal gas model. The model covers the expansions and movements of the emission sources, and it is related to the collective flows. By using the analytic expression and the Monte Carlo method, the azimuthal and polar angle distributions of mesons are calculated by the model and compared with the experimental data of the KaoS Collaboration.展开更多
A semi-analytical Monte Carlo (SMC) simulation was developed to simulate the propagation of laser-induced fluo- rescence (LIF) in an optically participating spray, which simultaneously exhibits spectrally dependent em...A semi-analytical Monte Carlo (SMC) simulation was developed to simulate the propagation of laser-induced fluo- rescence (LIF) in an optically participating spray, which simultaneously exhibits spectrally dependent emission, anisotropic scattering, absorption, and re-emission. The SMC simulation is described and then applied to an experimental configuration of a cloud of polydisperse droplets composed of water and sulforhodamine B dye. In the SMC simulation, the collected LIF flux on the remote receptor element is calculated as the global contribution from the emissive source, single, twice, … and nth collision events in any sequence. The effects on the fluorescence photons propagation of spray parameters like the dye concentration, droplets concentration, and droplets size are examined. Three spectral bands representing different optical properties are chosen to analyze the interference of absorption, scattering and re-emission on the detected LIF flux. The obtained spectral LIF flux distribution on the receptor demonstrates a “red shift” phenomenon.展开更多
The spontaneous emission from a microwave-driven four-level atom embedded in an anisotropic photonic crystal is studied. Due to the modified density of state(DOS) in the anisotropic photonic band gap(PBG) and the cohe...The spontaneous emission from a microwave-driven four-level atom embedded in an anisotropic photonic crystal is studied. Due to the modified density of state(DOS) in the anisotropic photonic band gap(PBG) and the coherent control induced by the coupling fields, spontaneous emission can be significantly enhanced when the position of the spontaneous emission peak gets close to the band gap edge. As a result of the closed-loop interaction between the fields and the atom,the spontaneous emission depends on the dynamically induced Autler–Townes splitting and its position relative to the PBG.Interesting phenomena, such as spectral-line suppression, enhancement and narrowing, and fluorescence quenching, appear in the spontaneous emission spectra, which are modulated by amplitudes and phases of the coherently driven fields and the effect of PBG. This theoretical study can provide us with more efficient methods to manipulate the atomic spontaneous emission.展开更多
基金financial support from the National Natural Science Foundation of China(Nos.52174092,51904290,52004272,52104125,42372328,and U23B2091)Natural Science Foundation of Jiangsu Province,China(Nos.BK20220157 and BK20240209)+3 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)Xuzhou Science and Technology Project,China(Nos.KC21033 and KC22005)Yunlong Lake Laboratory of Deep Underground Science and Engineering Project,China(No.104023002)the Graduate Innovation Program of China University of Mining and Technology(No.2023WLTCRCZL052)。
文摘This study aims to investigate mechanical properties and failure mechanisms of layered rock with rough joint surfaces under direct shear loading.Cubic layered samples with dimensions of 100 mm×100 mm×100 mm were casted using rock-like materials,with anisotropic angle(α)and joint roughness coefficient(JRC)ranging from 15°to 75°and 2-20,respectively.The direct shear tests were conducted under the application of initial normal stress(σ_(n))ranging from 1-4 MPa.The test results indicate significant differences in mechanical properties,acoustic emission(AE)responses,maximum principal strain fields,and ultimate failure modes of layered samples under different test conditions.The peak stress increases with the increasingαand achieves a maximum value atα=60°or 75°.Asσ_(n)increases,the peak stress shows an increasing trend,with correlation coefficients R²ranging from 0.918 to 0.995 for the linear least squares fitting.As JRC increases from 2-4 to 18-20,the cohesion increases by 86.32%whenα=15°,while the cohesion decreases by 27.93%whenα=75°.The differences in roughness characteristics of shear failure surface induced byαresult in anisotropic post-peak AE responses,which is characterized by active AE signals whenαis small and quiet AE signals for a largeα.For a given JRC=6-8 andσ_(n)=1 MPa,asαincreases,the accumulative AE counts increase by 224.31%(αincreased from 15°to 60°),and then decrease by 14.68%(αincreased from 60°to 75°).The shear failure surface is formed along the weak interlayer whenα=15°and penetrates the layered matrix whenα=60°.Whenα=15°,asσ_(n)increases,the adjacent weak interlayer induces a change in the direction of tensile cracks propagation,resulting in a stepped pattern of cracks distribution.The increase in JRC intensifies roughness characteristics of shear failure surface for a smallα,however,it is not pronounced for a largeα.The findings will contribute to a better understanding of the mechanical responses and failure mechanisms of the layered rocks subjected to sh
基金financially supported by the National Natural Science Foundation of China (No.51934003)the Major Science and Technology Special Project of Yunnan Province,China(Nos.202102AF080001 and 202102AG050024)。
文摘The anisotropy induced by rock bedding structures is usually manifested in the mechanical behaviors and failure modes of rocks.Brazilian tests are conducted for seven groups of shale specimens featuring different bedding angles. Acoustic emission (AE) and digital image correlation (DIC) technologies are used to monitor the in-situ failure of the specimens. Furthermore, the crack morphology of damaged samples is observed through scanning electron microscopy (SEM). Results reveal the structural dependence on the tensile mechanical behavior of shales. The shale disk exhibits compression in the early stage of the experiment with varying locations and durations. The location of the compression area moves downward and gradually disappears when the bedding angle increases. The macroscopic failure is well characterized by AE event location results, and the dominant frequency distribution is related to the bedding angle. The b-value is found to be stress-dependent.The crack turning angle between layers and the number of cracks crossing the bedding both increase with the bedding angle, indicating competition between crack propagations. SEM results revealed that the failure modes of the samples can be classified into three types:tensile failure along beddings with shear failure of the matrix, ladder shear failure along beddings with tensile failure of the matrix, and shear failure along multiple beddings with tensile failure of the matrix.
文摘Layered backfill is commonly used in mining operations,and its mechanical behavior is strongly influenced by delamination parameters.In this study,13 specimens with different numbers of delamination and delamination angle were prepared to investigate the anisotropic mechanical behavior,energy dissipation characteristics and crack development of backfill.P-wave velocity,uniaxial compression,scanning electron microscope(SEM),and acoustic emission(AE)experiments were conducted.The results indicate that:(1)The P-wave velocity has linear and elliptical relationships with the number of delamination surface and delamination angle,respectively;the strength,delamination parameters and P-wave velocity show a high degree of coincidence in terms of their function relationship,which can realize the rapid prediction of strength.(2)The microstructure of the delaminated surface is looser than that of the matrix,leading to a decrease in strength and an increase at the pore-fissure compaction stage.The number and angle of delamination increase linearly with the anisotropy coefficient.(3)The energy evolution in angle-cut backfill can be divided into four stages,with a decrease in the proportion of elastic energy at the initiation stress and peak stress with increasing number of delamination planes and delamination angle.(4)Crack development increases with the number of delamination surface and delamination angle,resulting in a decrease in energy dissipation coefficient and peak AE energy.These findings provide valuable insights for the design of filling materials and processes in mining operations.
基金supported by the National Natural Science Foundation of China(Nos.61874054,51902160,61725402,and 51972058)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX20_0271)+2 种基金the Natural Science Foundation of Jiangsu Province(No.BK20180489)Young Elite Scientists Sponsorship Program by CAST(No.2018QNRC001)Fundamental Research Funds for the Central Universities(No.30918011208).
文摘Controllable anisotropic growth of perovskite nanocrystals(NCs)is challenging since it is difficult to separate the nucleation and growth processes.Here,a two-step nucleation strategy is proposed to control the binding interaction between surface ligands and NCs,resulting in facet-induced coordination competition.Oleic acid as surface activated ligand leads to the formation of defective lead bromine octahedron,and the binding interaction between 4-dodecylbenzenesulfonic acid and lead atoms promotes the formation of two kinds of binding interactions.Based on this strategy,the anisotropic growth of CsPbBr_(3) nanoplatelet(NPLs)with adjusted length from 11.4 to 24 nm,and the evolution of NPLs from stacked to tongue-shaped have been realized.Elemental line scan reveals the sulfur atoms mainly distribute at the edge of NPLs.Furthermore,binding energy calculation and experimental results illustrate the coordination competition of different binding interaction on specific facets induces the anisotropic growth of NPLs.Importantly,strong emission anisotropy of highly ordered NPLs with polarization ratio up to 0.58 is illustrated.This work not only deepens our understanding of the controllable synthesis of perovskite NCs,but also provides a reference for the regulation of light emitting diode and soler cells.
基金Project supported by the National Natural Science Foundation of China(Grant Nos10675077 and 10275042)the Shanxi Provincial Natural Science Foundation of China(Grant No2007011005)the Shanxi Provincial Foundation for Returned Overseas Scholars,China
文摘Angular distributions of pious and kaons produced in heavy ion collisions at the low-energy end of high energies （1-2 A GeV） have been investigated by using a multisource ideal gas model. The model covers the expansions and movements of the emission sources, and it is related to the collective flows. By using the analytic expression and the Monte Carlo method, the azimuthal and polar angle distributions of mesons are calculated by the model and compared with the experimental data of the KaoS Collaboration.
基金Project supported by the National Natural Science Foundation of China (No. 60534030)the Scholarship of French Embassy in China and the Doctoral Grant from French Embassy in China
文摘A semi-analytical Monte Carlo (SMC) simulation was developed to simulate the propagation of laser-induced fluo- rescence (LIF) in an optically participating spray, which simultaneously exhibits spectrally dependent emission, anisotropic scattering, absorption, and re-emission. The SMC simulation is described and then applied to an experimental configuration of a cloud of polydisperse droplets composed of water and sulforhodamine B dye. In the SMC simulation, the collected LIF flux on the remote receptor element is calculated as the global contribution from the emissive source, single, twice, … and nth collision events in any sequence. The effects on the fluorescence photons propagation of spray parameters like the dye concentration, droplets concentration, and droplets size are examined. Three spectral bands representing different optical properties are chosen to analyze the interference of absorption, scattering and re-emission on the detected LIF flux. The obtained spectral LIF flux distribution on the receptor demonstrates a “red shift” phenomenon.
基金supported by the National Natural Science Foundation of China(Grant Nos.11447232,11204367,11447157,and 11305020)
文摘The spontaneous emission from a microwave-driven four-level atom embedded in an anisotropic photonic crystal is studied. Due to the modified density of state(DOS) in the anisotropic photonic band gap(PBG) and the coherent control induced by the coupling fields, spontaneous emission can be significantly enhanced when the position of the spontaneous emission peak gets close to the band gap edge. As a result of the closed-loop interaction between the fields and the atom,the spontaneous emission depends on the dynamically induced Autler–Townes splitting and its position relative to the PBG.Interesting phenomena, such as spectral-line suppression, enhancement and narrowing, and fluorescence quenching, appear in the spontaneous emission spectra, which are modulated by amplitudes and phases of the coherently driven fields and the effect of PBG. This theoretical study can provide us with more efficient methods to manipulate the atomic spontaneous emission.
