A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration o...A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration on structural and elec-trical characteristics of these films was investigated to study the phase transition region from amorphous to microcrystalline phase. At the same time,optical emis-sion spectra (OES) from the plasma during the deposition process were monitored to get information about the plasma properties,Raman spectra were measured to study the structural characteristics of the deposited films. The combinatorial analysis of OES and Raman spectra results demonstrated that the OES can be used as a fast method to diagnose phase transition from amorphous to microcrystalline silicon. At last the physical mechanism,why both OES and Raman can be used to diagnose the phase transition,was analyzed theoretically.展开更多
The passivation of hydrogen atoms and the conformation of textured surfaces under oil-lubricated conditions are effective strategies to obtain amorphous carbon(a-C)films with extremely low friction.It is critical to u...The passivation of hydrogen atoms and the conformation of textured surfaces under oil-lubricated conditions are effective strategies to obtain amorphous carbon(a-C)films with extremely low friction.It is critical to understanding the influence mechanism of selective surface hydrogenation on the tribological behaviors of textured a-C film under oil-lubricated conditions.In particular,the interactions of hydrogen atoms and lubricants are confusing,which is enslaved to the in situ characterization technique.The reactive molecular dynamics(RMD)simulations were conducted to analyze the friction response of textured a-C films with selective hydrogenation surfaces under oil-lubricated conditions.The results indicate that the existence of hydrogen atoms on specific bump sites significantly decreases the friction coefficient(μ)of textured a-C film,which is highly dependent on the surface hydrogen content.The repulsion between hydrogen atoms and lubricant molecules prompts the formation of a dense lubricant film on the surface of the mating material.Interestingly,with the enhancement of the surface hydrogen content,the passivation of the friction interface and the repulsion between hydrogen atoms and lubricants play dominant roles in reducing the friction coefficient instead of hydrodynamic lubrication.展开更多
Anelasticity, as an intrinsic property of amorphous solids, plays a significant role in understanding their relaxation and deformation mechanism. However, due to the lack of long-range order in amorphous solids, the s...Anelasticity, as an intrinsic property of amorphous solids, plays a significant role in understanding their relaxation and deformation mechanism. However, due to the lack of long-range order in amorphous solids, the structural origin of anelasticity and its distinction from plasticity remain elusive. In this work, using frozen matrix method, we study the transition from anelasticity to plasticity in a two-dimensional model glass. Three distinct mechanical behaviors, namely,elasticity, anelasticity, and plasticity, are identified with control parameters in the amorphous solid. Through the study of finite size effects on these mechanical behaviors, it is revealed that anelasticity can be distinguished from plasticity.Anelasticity serves as an intrinsic bridge connecting the elasticity and plasticity of amorphous solids. Additionally, it is observed that anelastic events are localized, while plastic events are subextensive. The transition from anelasticity to plasticity is found to resemble the entanglement of long-range interactions between element excitations. This study sheds light on the fundamental nature of anelasticity as a key property of element excitations in amorphous solids.展开更多
The perturbation in the magnetic field generated by the rotation or oscillation of magnetic domains in magnetic materials can emit low-frequency electromagnetic waves,which are expected to be used in low-frequency com...The perturbation in the magnetic field generated by the rotation or oscillation of magnetic domains in magnetic materials can emit low-frequency electromagnetic waves,which are expected to be used in low-frequency communications.However,the magnetic emission intensity,defined by the perturbation ability,of current commercially applied amorphous alloys,such as Metglas,cannot meet the application requirements for low-frequency antennas due to the domain motion energy loss.Herein,a multi-phase Metglas amorphous alloy was constructed by incorporatingα-Fe nanocrystals using rapid annealing to manipulate the domain movement.It was found that 3.89 times higher magnetic emission intensity is obtained compared to the pristine due to the synergism of the deformation and displacement mechanisms.Moreover,the low-frequency magnetic emission performance verification was carried out by preparing magnetoelectric composites as the antenna vibrator by assembling the alloy and macro piezoelectric fiber composites(MFC).Enhancements of magnetic emission intensity are found at 93.3%and 49.2%at the first and second harmonic frequencies compared with the unmodified alloy vibrator.Therefore,the approach leads to the development of high-performance communication with a novel standard for evaluation.展开更多
Developing electrocatalysts with fast kinetics and long-term stability for alkaline hydrogen oxidation reaction(HOR)and hydrogen evolution reaction(HER)is of considerable importance for the industrial production of gr...Developing electrocatalysts with fast kinetics and long-term stability for alkaline hydrogen oxidation reaction(HOR)and hydrogen evolution reaction(HER)is of considerable importance for the industrial production of green and sustainable energy.Here,an ultrathin Ir-Sb nanowires(Ir-Sb NWs)protected by antimony oxides(SbO_(x))was synthesized as an efficient bifunctional catalyst for both HOR and HER under alkaline media.Except from the much higher mass activities of Ir-Sb nanowires than those of Ir nanowires(Ir NWs)and commercial Pt/C,the SbO_(x) protective layer also contributes to the maintenance of morphology and anti-CO poisoning ability,leading to the long-term cycling performance in the presence of CO.Specifically,the Ir-Sb NW/SbO_(x) exhibits the highest catalytic activities,which are about 3.5 and 4.8 times to those of Ir NW/C and commercial Pt/C toward HOR,respectively.This work provides that the ultrathin morphology and H_(2)O-occupied Sb sites can exert the intrinsic high activity of Ir and effectively optimize the absorption of OH*both in alkaline HER/HOR electrolysis.展开更多
For the first time, a molecular dynamics simulation study of 50000 atoms has been performed for the transition mechanisms of the microstructure configurations of liquid metal Al during forming processes of amorphous s...For the first time, a molecular dynamics simulation study of 50000 atoms has been performed for the transition mechanisms of the microstructure configurations of liquid metal Al during forming processes of amorphous state by rapid cooling. Not only have various bond types been researched, but also icosahedra, defective icosahedra and Frank Kasper polyhedra cluster structures were discussed. A very clear picture of how the metal atoms gather to form clusters and how the clusters evolve further has been obtained. Some discussion corresponding to the microscopic mechanisms of the simulation results was also given. These will give an important enlightenment to understand the forming mechanisms and their microscopic processes of amorphous structures. [展开更多
The formation mechanism of the amorphous Ni-Fe-P coating was studied by analysis of the forming thermodynamics, dynamics, and crystallography of the amorphous alloy. The results show that, in the initial stage of depo...The formation mechanism of the amorphous Ni-Fe-P coating was studied by analysis of the forming thermodynamics, dynamics, and crystallography of the amorphous alloy. The results show that, in the initial stage of deposition a thin 'crystal epitaxial growth' layer first forms, and then transforms to amorphous gradually. The cross section in Ni-Fe-P coatings by electrolytic etching exhibits a banded structure of alternate dark and light bands. It is proposed that the banded structure is caused by a change in the P content with thickness,which is due to alternated depletion and enrichment of [OH-] in the diffusion layer resulting from the generation and evolution of hydrogen gas. The amorphous Ni-Fe-P coating will be formed in proper composition, high nucleation rate and strongly hindered growth of the crystal nucleus. Amorphous Ni-Fe-P alloys form as islands, and grow up by layer.展开更多
基金Supported by the National Basic Research Program of China (Grant Nos. 2006CB202602 and 2006CB202603)
文摘A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration on structural and elec-trical characteristics of these films was investigated to study the phase transition region from amorphous to microcrystalline phase. At the same time,optical emis-sion spectra (OES) from the plasma during the deposition process were monitored to get information about the plasma properties,Raman spectra were measured to study the structural characteristics of the deposited films. The combinatorial analysis of OES and Raman spectra results demonstrated that the OES can be used as a fast method to diagnose phase transition from amorphous to microcrystalline silicon. At last the physical mechanism,why both OES and Raman can be used to diagnose the phase transition,was analyzed theoretically.
基金financially supported by the National Natural Science Foundation of China(No.52175204)Basic Research Program of Xuzhou(No.KC21041)+2 种基金Material Science and Engineering Discipline Guidance Fund of China University of Mining and Technology(No.CUMTMS202211)Graduate Innovation Program of China University of Mining and Technology(No.2022WLJCRCZL281)Jiangsu Funding Program for Excellent Postdoctoral Talent(No.2022ZB522).
文摘The passivation of hydrogen atoms and the conformation of textured surfaces under oil-lubricated conditions are effective strategies to obtain amorphous carbon(a-C)films with extremely low friction.It is critical to understanding the influence mechanism of selective surface hydrogenation on the tribological behaviors of textured a-C film under oil-lubricated conditions.In particular,the interactions of hydrogen atoms and lubricants are confusing,which is enslaved to the in situ characterization technique.The reactive molecular dynamics(RMD)simulations were conducted to analyze the friction response of textured a-C films with selective hydrogenation surfaces under oil-lubricated conditions.The results indicate that the existence of hydrogen atoms on specific bump sites significantly decreases the friction coefficient(μ)of textured a-C film,which is highly dependent on the surface hydrogen content.The repulsion between hydrogen atoms and lubricant molecules prompts the formation of a dense lubricant film on the surface of the mating material.Interestingly,with the enhancement of the surface hydrogen content,the passivation of the friction interface and the repulsion between hydrogen atoms and lubricants play dominant roles in reducing the friction coefficient instead of hydrodynamic lubrication.
基金Project supported by Guangdong Major Project of Basic and Applied Basic Research,China (Grant No.2019B030302010)the National Natural Science Foundation of China (Grant No.52130108)+1 种基金Guangdong Basic and Applied Basic Research,China (Grant No.2021B1515140005)Pearl River Talent Recruitment Program (Grant No.2021QN02C04)。
文摘Anelasticity, as an intrinsic property of amorphous solids, plays a significant role in understanding their relaxation and deformation mechanism. However, due to the lack of long-range order in amorphous solids, the structural origin of anelasticity and its distinction from plasticity remain elusive. In this work, using frozen matrix method, we study the transition from anelasticity to plasticity in a two-dimensional model glass. Three distinct mechanical behaviors, namely,elasticity, anelasticity, and plasticity, are identified with control parameters in the amorphous solid. Through the study of finite size effects on these mechanical behaviors, it is revealed that anelasticity can be distinguished from plasticity.Anelasticity serves as an intrinsic bridge connecting the elasticity and plasticity of amorphous solids. Additionally, it is observed that anelastic events are localized, while plastic events are subextensive. The transition from anelasticity to plasticity is found to resemble the entanglement of long-range interactions between element excitations. This study sheds light on the fundamental nature of anelasticity as a key property of element excitations in amorphous solids.
基金supported by the Key Research and Development Program of Hubei Province(No.2021BAA214)the Open Fund of Sanya Science and Education Innovation Park of Wuhan University of Technology(Nos.2021KF0022,2021KF0013,and 2020KF0026)+2 种基金Independent Innovation Projects of the Hubei Longzhong Laboratory(Nos.2022ZZ-34 and 2022ZZ-35)the National Science Fund for Distinguished Young Scholars of Hubei Province(No.201CFA067)the National innovation and entrepreneurship training program for college students(Nos.202310497010 and S202310497026).
文摘The perturbation in the magnetic field generated by the rotation or oscillation of magnetic domains in magnetic materials can emit low-frequency electromagnetic waves,which are expected to be used in low-frequency communications.However,the magnetic emission intensity,defined by the perturbation ability,of current commercially applied amorphous alloys,such as Metglas,cannot meet the application requirements for low-frequency antennas due to the domain motion energy loss.Herein,a multi-phase Metglas amorphous alloy was constructed by incorporatingα-Fe nanocrystals using rapid annealing to manipulate the domain movement.It was found that 3.89 times higher magnetic emission intensity is obtained compared to the pristine due to the synergism of the deformation and displacement mechanisms.Moreover,the low-frequency magnetic emission performance verification was carried out by preparing magnetoelectric composites as the antenna vibrator by assembling the alloy and macro piezoelectric fiber composites(MFC).Enhancements of magnetic emission intensity are found at 93.3%and 49.2%at the first and second harmonic frequencies compared with the unmodified alloy vibrator.Therefore,the approach leads to the development of high-performance communication with a novel standard for evaluation.
基金supports by the National Key R&D Program of China(No.2020YFB1505802)Ministry of Science and Technology of China(No.2017YFA0208200)+1 种基金the National Natural Science Foundation of China(Nos.22025108,U21A20327,22121001 and 22275152)start-up support from Xiamen University.We thank beamline TLS01C1(“National Synchrotron Radiation Research Center”)for providing the beam time.We acknowledge support from the Max Planck-POSTECHHsinchu Center for Complex Phase Materials.
文摘Developing electrocatalysts with fast kinetics and long-term stability for alkaline hydrogen oxidation reaction(HOR)and hydrogen evolution reaction(HER)is of considerable importance for the industrial production of green and sustainable energy.Here,an ultrathin Ir-Sb nanowires(Ir-Sb NWs)protected by antimony oxides(SbO_(x))was synthesized as an efficient bifunctional catalyst for both HOR and HER under alkaline media.Except from the much higher mass activities of Ir-Sb nanowires than those of Ir nanowires(Ir NWs)and commercial Pt/C,the SbO_(x) protective layer also contributes to the maintenance of morphology and anti-CO poisoning ability,leading to the long-term cycling performance in the presence of CO.Specifically,the Ir-Sb NW/SbO_(x) exhibits the highest catalytic activities,which are about 3.5 and 4.8 times to those of Ir NW/C and commercial Pt/C toward HOR,respectively.This work provides that the ultrathin morphology and H_(2)O-occupied Sb sites can exert the intrinsic high activity of Ir and effectively optimize the absorption of OH*both in alkaline HER/HOR electrolysis.
文摘For the first time, a molecular dynamics simulation study of 50000 atoms has been performed for the transition mechanisms of the microstructure configurations of liquid metal Al during forming processes of amorphous state by rapid cooling. Not only have various bond types been researched, but also icosahedra, defective icosahedra and Frank Kasper polyhedra cluster structures were discussed. A very clear picture of how the metal atoms gather to form clusters and how the clusters evolve further has been obtained. Some discussion corresponding to the microscopic mechanisms of the simulation results was also given. These will give an important enlightenment to understand the forming mechanisms and their microscopic processes of amorphous structures. [
文摘The formation mechanism of the amorphous Ni-Fe-P coating was studied by analysis of the forming thermodynamics, dynamics, and crystallography of the amorphous alloy. The results show that, in the initial stage of deposition a thin 'crystal epitaxial growth' layer first forms, and then transforms to amorphous gradually. The cross section in Ni-Fe-P coatings by electrolytic etching exhibits a banded structure of alternate dark and light bands. It is proposed that the banded structure is caused by a change in the P content with thickness,which is due to alternated depletion and enrichment of [OH-] in the diffusion layer resulting from the generation and evolution of hydrogen gas. The amorphous Ni-Fe-P coating will be formed in proper composition, high nucleation rate and strongly hindered growth of the crystal nucleus. Amorphous Ni-Fe-P alloys form as islands, and grow up by layer.
