Appropriately adapted comprehensive mechanical properties,degradation behavior and biocompatibility are prerequisites for the application of Zn-based biodegradable implants.In this study,hot-extruded Zn-0.5Cu-xFe(x=0....Appropriately adapted comprehensive mechanical properties,degradation behavior and biocompatibility are prerequisites for the application of Zn-based biodegradable implants.In this study,hot-extruded Zn-0.5Cu-xFe(x=0.1,0.2 and 0.4 wt%)alloys were fabricated as candidates for biodegradable materials for guided bone regeneration(GBR)membranes.The hot-extrusion process and Cu alloying were expected mostly to enhance the mechanical properties,and the Fe alloying was added mainly for regulating the degradation.The microstructure,mechanical properties and in vitro degradation behavior were systematically investigated.The ZnCuFe alloys were composed of a Zn matrix and FeZn13 phase.With increasing Fe content,a higher FeZn13 phase precipitation with larger particles was observed.Since elongation declined significantly until fracture with increasing Fe content up to 0.4 wt%,the ZnCuFe(0.2 wt%)alloy achieved a good balance between mechanical strength and ductility,with an ultimate tensile strength of 202.3 MPa and elongation at fracture of 41.2%.Moreover,the addition of Fe successfully accelerated the degradation of ZnCuFe alloys.The ZnCuFe(0.2 wt%)alloy showed relatively uniform corrosion in the long-term degradation test.Furthermore,extracts of the ZnCuFe(0.2 wt%)alloy showed no apparent cytotoxic effects against L929 fibroblasts,Saos-2 osteoblasts or TAg periosteal cells.The ZnCuFe(0.2 wt%)alloy exhibited the potential to inhibit bacterial adhesion of Streptococcus gordonii and mixed oral bacteria.Our study provides evidence that the ZnCuFe(0.2 wt%)alloy can represent a promising material for the application as a suitable GBR membrane.展开更多
Following the footsteps of biodegradable Mg-based and Fe-based alloys,biodegradable Zn-based alloy is a newcomer and rising star in the family of biodegradable metals and alloys.The combined superior mechanical proper...Following the footsteps of biodegradable Mg-based and Fe-based alloys,biodegradable Zn-based alloy is a newcomer and rising star in the family of biodegradable metals and alloys.The combined superior mechanical properties,appropriate degradation rates,excellent biocompatibility of biodegradable Zn-based alloys have brought worldwide research interest on the design,development and clinical translation of Zn-based alloys.The present perspective has summarized opportunities and challenges in the development of biodegradable Zn-based alloys.展开更多
Zn-based sorbent （Z20SC） prepared through semi-coke support in 20 wt% zinc nitrate solution by high-pressure impregnation presents an excellent desulfurization capacity in hot coal gas,in which H2 S can not be nearl...Zn-based sorbent （Z20SC） prepared through semi-coke support in 20 wt% zinc nitrate solution by high-pressure impregnation presents an excellent desulfurization capacity in hot coal gas,in which H2 S can not be nearly detected in the outlet gas before 20 h breakthrough time.The effects of the main operational conditions and the particle size of Z20SC sorbent on its desulfurization performances sorbent were investigated in a fixed-bed reactor and the desulfurization kinetics of Z20SC sorbent removing H2 S from hot coal gas was calculated based on experimental data.Results showed that the conversion of Z20SC sorbent desulfurization reaction increased with the decrease of the particle size of the sorbent and the increases of gas volumetric flow rate,reaction temperature and H 2 S content in inlet gas.Z20SC sorbent obtained from hydrothermal synthesis by high-pressure impregnation possessed much larger surface area and pore volume than semi-coke support,and they were significantly reduced after the desulfurization reaction.The equivalent grain model was reasonably used to analyze experimental data,in which k s=4.382×10-3 exp（-8.270×103/RgT） and Dep=1.262×10-4exp（1.522×104/RgT）.It suggests that the desulfurization reaction of the Z20SC sorbent is mainly controlled by the chemical reaction in the initial stage and later by the diffusion through the reacted sorbent layer.展开更多
Recently,zinc and its alloys have been proposed as promising candidates for biodegradable metals(BMs),owning to their preferable corrosion behavior and acceptable biocompatibility in cardiovascular,bone and gastrointe...Recently,zinc and its alloys have been proposed as promising candidates for biodegradable metals(BMs),owning to their preferable corrosion behavior and acceptable biocompatibility in cardiovascular,bone and gastrointestinal environments,together with Mg-based and Fe-based BMs.However,there is the desire for surface treatment for Zn-based BMs to better control their biodegradation behavior.Firstly,the implantation of some Zn-based BMs in cardiovascular environment exhibited intimal activation with mild inflammation.Secondly,for orthopedic applications,the biodegradation rates of Zn-based BMs are relatively slow,resulting in a long-term retention after fulfilling their mission.Meanwhile,excessive Zn2+release during degradation will cause in vitro cytotoxicity and in vivo delayed osseointegration.In this review,we firstly summarized the current surface modification methods of Zn-based alloys for the industrial applications.Then we comprehensively summarized the recent progress of biomedical bulk Zn-based BMs as well as the corresponding surface modification strategies.Last but not least,the future perspectives towards the design of surface bio-functionalized coatings on Zn-based BMs for orthopedic and cardiovascular applications were also briefly proposed.展开更多
Benefiting from the advantageous features of high safety,abundant reserves,low cost,and high energy density,aqueous Zn-based rechargeable batteries(AZBs)have received extensive attention as promising candidates for en...Benefiting from the advantageous features of high safety,abundant reserves,low cost,and high energy density,aqueous Zn-based rechargeable batteries(AZBs)have received extensive attention as promising candidates for energy storage.To achieve high-performance AZBs with high reversibility and energy density,great efforts have been devoted to overcoming their drawbacks by focusing on the modification of electrode materials and electrolytes.Based on different cathode materials and aqueous electrolytes,the development of aqueous AZBs with different redox mechanisms are discussed in this review,including insertion/extraction chemistries(e.g.,Zn^(2+),alkali metal ion,H^(+),NH_(4)^(+),and so forth dissolution/deposition reactions(e.g.,MnO_(2)/Mn^(2+)),redox couples in flow batteries(e.g.,I_(3)/3I,Br_(2)/Br,and so forth),oxygen electrochemistry(e.g.,O_(2)/OH,O_(2)/O_(2)2),and carbon dioxide electrochemistry(e.g.,CO_(2)/CO,CO_(2)/HCOOH).In particular,the basic reaction mechanisms,issues with the Zn electrode,aqueous electrolytes,and cathode materials as well as their design strategies are systematically reviewed.Finally,the remaining challenges faced by AZBs are summarized,and perspectives for further investigations are proposed.展开更多
Due to its high theoretical capacity(820 mAh g^(−1)),low standard electrode potential(−0.76 V vs.SHE),excellent stability in aqueous solutions,low cost,environmental friendliness and intrinsically high safety,zinc(Zn)...Due to its high theoretical capacity(820 mAh g^(−1)),low standard electrode potential(−0.76 V vs.SHE),excellent stability in aqueous solutions,low cost,environmental friendliness and intrinsically high safety,zinc(Zn)-based batteries have attracted much attention in developing new energy storage devices.In Zn battery system,the battery performance is significantly affected by the solid electrolyte interface(SEI),which is controlled by electrode and electrolyte,and attracts dendrite growth,electrochemical stability window range,metallic Zn anode corrosion and passivation,and electrolyte mutations.Therefore,the design of SEI is decisive for the overall performance of Zn battery systems.This paper summarizes the formation mechanism,the types and characteristics,and the characterization techniques associated with SEI.Meanwhile,we analyze the influence of SEI on battery performance,and put forward the design strategies of SEI.Finally,the future research of SEI in Zn battery system is prospected to seize the nature of SEI,improve the battery performance and promote the large-scale application.展开更多
Owing to the merits of low cost,high safety and environmental benignity,rechargeable aqueous Zn-based batteries(ZBs)have gained tremendous attention in recent years.Nevertheless,the poor reversibility of Zn anodes tha...Owing to the merits of low cost,high safety and environmental benignity,rechargeable aqueous Zn-based batteries(ZBs)have gained tremendous attention in recent years.Nevertheless,the poor reversibility of Zn anodes that originates from dendrite growth,surface passivation and corrosion,severely hinders the further development of ZBs.To tackle these issues,here we report a Janus separator based on a Zn-ion conductive metal-organic framework(MOF)and reduced graphene oxide(rGO),which is able to regulate uniform Zn2+flux and electron conduction simultaneously during battery operation.Facilitated by the MOF/rGO bifunctional interlayers,the Zn anodes demonstrate stable plating/stripping behavior(over 500 h at 1 mA cm^(−2)),high Coulombic efficiency(99.2%at 2 mA cm^(−2) after 100 cycles)and reduced redox barrier.Moreover,it is also found that the Zn corrosion can be effectively retarded through diminishing the potential discrepancy on Zn surface.Such a separator engineering also saliently promotes the overall performance of Zn|MnO2 full cells,which deliver nearly 100%capacity retention after 2000 cycles at 4 A g^(−1) and high power density over 10 kW kg^(−1).This work provides a feasible route to the high-performance Zn anodes for ZBs.展开更多
Advanced soft ion-conducting hydrogels have been developed rapidly in the integrated portable health monitoring equipment due to their higher sensitivity,sensory traits,tunable conductivity,and stretchability for phys...Advanced soft ion-conducting hydrogels have been developed rapidly in the integrated portable health monitoring equipment due to their higher sensitivity,sensory traits,tunable conductivity,and stretchability for physiological activities and personal healthcare detection.However,traditional hydrogel conductors are normally susceptible to large deformation and strong mechanical stress,which leads to inferior electro-mechanical stability for real application scenarios.Herein,a strong ionically conductive hydrogel(poly(vinyl alcohol)-boric acid-glycerol/sodium alginate-calcium chloride/electrolyte ions(PBG/SC/EI))was designed by engineering the covalently and ionically crosslinked networks followed by the salting-out effect to further enhance the mechanical strength and ionic conductivity of the hydrogel.Owing to the collective effects of the energy-dissipation mechanism and salting-out effect,the designed PBG/SC/EI with excellent structural integrity and robustness exhibits exceptional mechanical properties(elongation at break for 559.1%and tensile strength of 869.4 kPa)and high ionic conductivity(1.618 S·m^(-1)).As such,the PBG/SC/EI strain sensor features high sensitivity(gauge factor=2.29),which can effectively monitor various kinds of human motions(joint motions,facial micro-expression,faint respiration,and voice recognition).Meanwhile,the hydrogel-based Zn||MnO_(2)battery delivers a high capacity of 267.2 mAh·g^(-1)and a maximal energy density of 356.8 Wh·kg^(-1)associated with good cycle performance of 71.8%capacity retention after 8000 cycles.Additionally,an integrated bio-monitoring system with the sensor and Zn||MnO_(2)battery can accurately identify diverse physiological activities in a real-time and non-invasive way.This work presents a feasible strategy for designing high-performance conductive hydrogels for highly-reliable integrated bio-monitoring systems with excellent practicability.展开更多
Zinc-based degradable metals are considered one of the most promising biodegradable materials due to their moderate corrosion rate,excellent mechanical properties,and good biocompatibility.In this work,biodegradable Z...Zinc-based degradable metals are considered one of the most promising biodegradable materials due to their moderate corrosion rate,excellent mechanical properties,and good biocompatibility.In this work,biodegradable Zn-0.4Mn-0.8Li alloy was fabricated and rolled in multiple passes at different tem peratures.As the hot rolling temperature increases,the grain size of Zn-0.4Mn-0.8Li alloy was found to increase cor-respondingly.Further,a multi-scale structure with the coexistence of coarse grains and fine grains was obtained.The results demonstrated that the mechanical strength and corrosion resistance were improved by increasing the rolled temperature.It was observed that Zn-0.4Mn-0.8Li alloy with a total reduction of 90%after hot rolling at 325℃ exhibited excellent mechanical and corrosion properties.The cooperation of multi-scale microstructure and twinning was found to improve the strength and guarantee the duc-tility of Zn-0.4Mn-0.8Li alloy significantly so that the 325℃ hot-rolled Zn-0.4Mn-0.8Li alloy has optimal comprehensive properties.Further,yield strength,ultimate tensile strength,and elongation were found to be 449.7±5.3 MPa,505.1±6.5 MPa,and 40.5%±7.5%,respectively.Meanwhile,Zn-0.4Mn-0.8Li al-loy via 325℃ hot-rolled processes also exhibited excellent corrosion resistance.The corrosion current density and corrosion potential were found to be 8.8×10-5 mA cm^(-2)and−0.929 V,respectively.The preliminary study indicates that Zn-0.4Mn-0.8Li alloy is a promising candidate material for medical de-vice applications.展开更多
Nowadays,Zinc(Zn)-based biocomposites as biodegradable implant materials have been recognized as a promising approach to overcome the insufficient mechanical performance of Zn matrix and to endow the Zn-based material...Nowadays,Zinc(Zn)-based biocomposites as biodegradable implant materials have been recognized as a promising approach to overcome the insufficient mechanical performance of Zn matrix and to endow the Zn-based materials with biofunctionality.However,the strengthening effect on Zn-based matrix compos-ite remains far from expectation mainly due to the poor interfacial bonding between the reinforcement and Zn matrix,and the relatively coarse grain size of the Zn matrix.Herein,we have developed a novel in situ wetting strategy to ameliorate the interfacial bonding and mechanical performance of Zn-Ag-based composites using cuprous oxide-modified graphene oxide(Cu_(2)O-GO)sheets as reinforcement.The en-hanced interfacial bonding between GO sheets and Zn matrix owing to the in situ generated ZnO inter-layer and the ultrafine microstructure with an average grain size of 360 nm were simultaneously achieved in the hot extruded(HEed)1 wt%Cu_(2)O-GO/Zn-2 wt%Ag biocomposites.Consequently,HEed biocompos-ites possessed excellent tensile properties,including ultimate tensile strength(UTS)of 344.0±2.4 MPa,yield stress(YS)of 314.0±4.8 MPa,and elongation at failure of 15.5%±1.3%.Ultrafine and uniform microstructure of the HEed biocomposites resulted in a relatively uniform corrosion morphology and a degradation rate of 0.195±0.004 mm y^(−1) in simulated body fluid(SBF)solution.The 2-fold diluted extract of the HEed biocomposites exhibited satisfying cytocompatibility with MC3T3-E1 pre-osteoblast comparable to that of Ti-6Al-4 V ELI alloys.More importantly,the synergistic effect of metallic ions,Ag-rich nanoparticles,and GO sheets contributed to the remarkable antibacterial activity of the experimental biocomposites against both S.aureus and E.coli.These results demonstrated that the 1Cu_(2)O-GO/Zn-2Ag biocomposites should be anticipated as a promising biodegradable material for orthopedic applications.展开更多
Zn-based materials are promising as bone repair materials,but their poor mechanical property and bioactivity as well as low degradation rate render the potential application.Rational structural and material design can...Zn-based materials are promising as bone repair materials,but their poor mechanical property and bioactivity as well as low degradation rate render the potential application.Rational structural and material design can address the concerns.In this study,porous Zn-1 wt.%Mg-3 vol.%β-TCP scaffolds with 40%and 60%preset porosities were fabricated via heating-press sintering using NaCl particles as space holders,and their mechanical properties,in vitro degradation behavior,cytotoxicity and in vivo osteogenic activities were evaluated.The results showed that the actual porosities of the scaffolds were 22%and 50%.Mg exists in the form of Zn 2 Mg and Zn 11 Mg 2,whileβ-TCP evenly distributed in the matrix.The compressive yield strength of scaffolds ranges from approximately 58.46 to 71.04 MPa,which is close to that of cancellous bone.The in vitro degradation tests showed that the corrosion rate of the scaffolds was in the range of about 2.73-4.28 mm y^(-1).Moreover,the scaffolds not only provided great space for osteoblasts adhesion and proliferation in vitro but also possessed favorable degradability and osteogenic activity in vivo.The porous Zn-1 wt.%Mg-3 vol.%β-TCP scaffolds manifest reliable mechanical properties,desirable degradability,and osteogenic activity,which are promising as next-generation bone repair materials.展开更多
Zn-based electrochemical energy storage(EES)systems have received tremendous attention in recent years,but their zinc anodes are seriously plagued by the issues of zinc dendrite and side reactions(e.g.,corrosion and h...Zn-based electrochemical energy storage(EES)systems have received tremendous attention in recent years,but their zinc anodes are seriously plagued by the issues of zinc dendrite and side reactions(e.g.,corrosion and hydrogen evolution).Herein,we report a novel strategy of employing zincophilic Cu nanowire networks to stabilize zinc anodes from multiple aspects.According to experimental results,COMSOL simulation and density functional theory calculations,the Cu nanowire networks covering on zinc anode surface not only homogenize the surface electric field and Zn^(2+)concentration field,but also inhibit side reactions through their hydrophobic feature.Meanwhile,facets and edge sites of the Cu nanowires,especially the latter ones,are revealed to be highly zincophilic to induce uniform zinc nucleation/deposition.Consequently,the Cu nanowire networks-protected zinc anodes exhibit an ultralong cycle life of over 2800 h and also can continuously operate for hundreds of hours even at very large charge/discharge currents and areal capacities(e.g.,10 mA cm^(-2)and 5 mAh cm^(-2)),remarkably superior to bare zinc anodes and most of currently reported zinc anodes,thereby enabling Zn-based EES devices to possess high capacity,16,000-cycle lifespan and rapid charge/discharge ability.This work provides new thoughts to realize long-life and high-rate zinc anodes.展开更多
The microstructures and properties of the Zn-Cu-Bi-Sn(ZCBS) high-temperature solders with various Sn contents were studied using differential scanning calorimetry(DSC),scanning electron microscopy(SEM) and X-ray diffr...The microstructures and properties of the Zn-Cu-Bi-Sn(ZCBS) high-temperature solders with various Sn contents were studied using differential scanning calorimetry(DSC),scanning electron microscopy(SEM) and X-ray diffraction(XRD).The results indicate that the increase of Sn content can both decrease the melting temperature and melting range of ZCBS solders and it can also effectively improve the wettability on Cu substrate.The shear strength of solder joints reaches a maximum value with the Sn addition of 5%(mass fraction),which is attributed to the formation of refined β-Sn and primary ε-CuZn_5 phases in η-Zn matrix.However,when the content of Sn exceeds 5%,the shear strength decreases due to the formation of coarse β-Sn phase,which is net-shaped presented at the grain boundary.展开更多
Environmental degradation has promoted the exploitation of novel energy-storage devices.Electrochemical en-ergy technologies,including supercapacitors and aqueous batteries,are highly desirable for energy storage appl...Environmental degradation has promoted the exploitation of novel energy-storage devices.Electrochemical en-ergy technologies,including supercapacitors and aqueous batteries,are highly desirable for energy storage appli-cations.Among them,aqueous zinc-based batteries(AZBs)are highly valued because of their inherent safety and low cost.One class of emerging materials favorably employed in these devices are organic cathodes,featuring resource renewability,cost-effectiveness,and adjustable electrochemical properties via facile structural modi-fication compared to the conventional inorganic cathodes.To date,various types of organic compounds have been developed and applied to AZBs.This paper comprehensively reviews the mechanisms involved in organic electrode material reactions,highlighting the structural modifications,including morphological,molecular,func-tional group,crystal,and electronic structures,affecting the final device performance.Conclusively,the prospects of practical applications of zinc/organic aqueous battery are delineated.展开更多
Supercapacitor is considered as one of the most promising energy storage systems because of its high power density, long life and low production cost. Electrode materials play important roles in the performance of Sup...Supercapacitor is considered as one of the most promising energy storage systems because of its high power density, long life and low production cost. Electrode materials play important roles in the performance of Supercapacitor (SC). In this study, Zn-based hydrotalcite structure materials are prepared by hydrothermal method. The influence of Zn/Al ratio in precursors on electrochemical properties of electrode materials is investigated. The results show that Al(III) promotes the formation of relatively ordered active substances and participates in redox reaction on electrode surface. Specific capacitance of Zn-based electrode reaches 2557 F<span style="white-space:nowrap;">·</span>g<sup>-1</sup> (1.0 A<span style="white-space:nowrap;">·</span>g<sup>-1</sup>) at Zn/Al molar ratio of 1:1 in precursors. This method is simple and environmentally friendly. The electrode exhibits excellent electrochemical activity and stability, showing this material application prospect for supercapacitor.展开更多
A Zn-based coordination polymer [Zn（2-cb）2（4,4′-bpy）0.5]n （1, 2-cb = 2-chloro- benzoate, 4,4＇-bpy = 4,4′-bipyridine） was prepared by hydrothermal synthesis using 2-chloro- benzoic acid and 4,4′-bipyridyl as ...A Zn-based coordination polymer [Zn（2-cb）2（4,4′-bpy）0.5]n （1, 2-cb = 2-chloro- benzoate, 4,4＇-bpy = 4,4′-bipyridine） was prepared by hydrothermal synthesis using 2-chloro- benzoic acid and 4,4′-bipyridyl as ligands. The compound was characterized by elemental analysis, IR, TGA, and X-ray single-crystal diffraction. The crystal belongs to the monoclinic system, space group PI with a = 8.0471（5）, b = 9.7338（6）, c = 11.7830（7） A, a = 96.2230（10）, β = 92.542（2）, γ = 103.7560（10）°, V = 888.84（9） A3, Z = 2, Mr = 454.57, Dc = 1.698 g/cm3,μ（MoKa） = 1.708 mm.1, F（000） = 458, the final R = 0.0359 and wR = 0.0936 for 3167 observed reflections with I 〉 2σ（I）. The crystal analysis indicates that 1 exhibits a 1-D chain structure constructed by 4,4′-bpy and a dicaryon secondary-building-unit of [Zn2（2-cb）4]. Luminescence analysis revealed that compound 1 emits blue fluorescence with a fluorescence lifetime of 55.03 ns.展开更多
As a highly promising candidate for hydrogen storage,crucial to vehicles powered by fuel cells,metal–organic frameworks(MOFs)have attracted the attention of chemists in recent decades.H_(2) uptake in an MOF is influe...As a highly promising candidate for hydrogen storage,crucial to vehicles powered by fuel cells,metal–organic frameworks(MOFs)have attracted the attention of chemists in recent decades.H_(2) uptake in an MOF is influenced by many factors such as pore size,ligand functionalization,and open metal sites.The synergistic effect of these factors can significantly enhance the H_(2) uptake in an MOF.Herein,we report a twofold interpenetrated MOF(UPC-501)based on a Zn_(4)O(COO)_(6)secondary building unit with the H_(2) uptake of 14.8 mmol g^(−1)(2.96 wt%)at 77 K and 0.1 MPa.This uptake is the highest among all the reported porous Zn-based MOF materials.Both experimental and theoretical results confirm that the reduced pore size derived from twofold interpenetration and the imidazole-functionalized ligand are responsible for the extremely high H_(2) uptake of UPC-501.展开更多
Two Zn-based sorbents, L-991 and L-992 used for hot gas desulfurization (HGD) were introduced. Zn/Ti ratio of the two sorbent was 1:1 and 2:3 resptively and a certain proportion of Cu and Mn metal oxide were added int...Two Zn-based sorbents, L-991 and L-992 used for hot gas desulfurization (HGD) were introduced. Zn/Ti ratio of the two sorbent was 1:1 and 2:3 resptively and a certain proportion of Cu and Mn metal oxide were added into L-992, which provided better performance than L-991 in aspects of suitable work temperature, sulfur capacity and agglomeration on the surface of sorbent particles. The evaluation tests were done on both sorbents include multi cycles tests. ARD and SEM analysis were done on fresh and post tests sorbent. During continuous sulfidation/regeneration, the H2S concentra- tion can be reduced from about 10 g/m3 to less than 20 mg/m3, the H2S removal effi- ciency >99 %.展开更多
Zhuzhou Group well follows corporate development plan to continue brand strategy.Beside the 300000-ton zinc smelting project in Shuikoushan Economic Development Zone Industrial Park in Changning,Hengyang,Hunan,the com...Zhuzhou Group well follows corporate development plan to continue brand strategy.Beside the 300000-ton zinc smelting project in Shuikoushan Economic Development Zone Industrial Park in Changning,Hengyang,Hunan,the company plans to co-establish holdings subsidiary in Nanzhou Industrial Park in Lukou,Zhuzhou,Hunan,to launch a 300000-ton Zn-based material project,with an estimated total investment of RMB 338 million.展开更多
基金the program of project-related personal exchange of person promoting international mobility of researchers(PPP)jointly funded by the(DAAD)German Academic Exchange Service and(CSC)China Scholarship Council:DAAD grant OsteoZink(Project-ID 57390341)This research was funded by National Key Research and Development Plan(Grant No.2016YFC1102500)+1 种基金Sichuan Science and Technology Program Under(Grant No.2020YFH0077)We would like also to thank the Analytical and Testing Center of Southwest Jiaotong University for the characterization analysis and discussion.The authors would also like to acknowledge scientific advice from Dr.Lutz Scheideler and excellent technical assistance of Mr.Ernst Schweizer and Mrs.Evi Kimmerle-Müller from Section Medical Materials Science and Technology,University Hospital Tübingen.
文摘Appropriately adapted comprehensive mechanical properties,degradation behavior and biocompatibility are prerequisites for the application of Zn-based biodegradable implants.In this study,hot-extruded Zn-0.5Cu-xFe(x=0.1,0.2 and 0.4 wt%)alloys were fabricated as candidates for biodegradable materials for guided bone regeneration(GBR)membranes.The hot-extrusion process and Cu alloying were expected mostly to enhance the mechanical properties,and the Fe alloying was added mainly for regulating the degradation.The microstructure,mechanical properties and in vitro degradation behavior were systematically investigated.The ZnCuFe alloys were composed of a Zn matrix and FeZn13 phase.With increasing Fe content,a higher FeZn13 phase precipitation with larger particles was observed.Since elongation declined significantly until fracture with increasing Fe content up to 0.4 wt%,the ZnCuFe(0.2 wt%)alloy achieved a good balance between mechanical strength and ductility,with an ultimate tensile strength of 202.3 MPa and elongation at fracture of 41.2%.Moreover,the addition of Fe successfully accelerated the degradation of ZnCuFe alloys.The ZnCuFe(0.2 wt%)alloy showed relatively uniform corrosion in the long-term degradation test.Furthermore,extracts of the ZnCuFe(0.2 wt%)alloy showed no apparent cytotoxic effects against L929 fibroblasts,Saos-2 osteoblasts or TAg periosteal cells.The ZnCuFe(0.2 wt%)alloy exhibited the potential to inhibit bacterial adhesion of Streptococcus gordonii and mixed oral bacteria.Our study provides evidence that the ZnCuFe(0.2 wt%)alloy can represent a promising material for the application as a suitable GBR membrane.
基金the National Natural Science Foundation of China(Nos.31700819 and 51871020)the Young Elite Scientists Sponsorship Program by CAST(YESS,No2018QNRC001)the Fundamental Research Funds for the Central Universities(No.06500098)。
文摘Following the footsteps of biodegradable Mg-based and Fe-based alloys,biodegradable Zn-based alloy is a newcomer and rising star in the family of biodegradable metals and alloys.The combined superior mechanical properties,appropriate degradation rates,excellent biocompatibility of biodegradable Zn-based alloys have brought worldwide research interest on the design,development and clinical translation of Zn-based alloys.The present perspective has summarized opportunities and challenges in the development of biodegradable Zn-based alloys.
基金supported by the National Basic Research Program of China (2012CB723105)the National Natural Science Foundation of China(20976117)+1 种基金Shanxi Province Natural Science Foundation (2010011014-3)Shanxi Province Basic Conditions Platform for Science and Technology Project(2010091015)
文摘Zn-based sorbent （Z20SC） prepared through semi-coke support in 20 wt% zinc nitrate solution by high-pressure impregnation presents an excellent desulfurization capacity in hot coal gas,in which H2 S can not be nearly detected in the outlet gas before 20 h breakthrough time.The effects of the main operational conditions and the particle size of Z20SC sorbent on its desulfurization performances sorbent were investigated in a fixed-bed reactor and the desulfurization kinetics of Z20SC sorbent removing H2 S from hot coal gas was calculated based on experimental data.Results showed that the conversion of Z20SC sorbent desulfurization reaction increased with the decrease of the particle size of the sorbent and the increases of gas volumetric flow rate,reaction temperature and H 2 S content in inlet gas.Z20SC sorbent obtained from hydrothermal synthesis by high-pressure impregnation possessed much larger surface area and pore volume than semi-coke support,and they were significantly reduced after the desulfurization reaction.The equivalent grain model was reasonably used to analyze experimental data,in which k s=4.382×10-3 exp（-8.270×103/RgT） and Dep=1.262×10-4exp（1.522×104/RgT）.It suggests that the desulfurization reaction of the Z20SC sorbent is mainly controlled by the chemical reaction in the initial stage and later by the diffusion through the reacted sorbent layer.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51931001,51901003)the International Cooperation and Exchange project between NSFC(China)and CNR(Italy)(NSFC-CNR Grant No.52011530392)the Open Project of NMPA Key Laboratory for Dental Materials(Grant No.PKUSS20200401).
文摘Recently,zinc and its alloys have been proposed as promising candidates for biodegradable metals(BMs),owning to their preferable corrosion behavior and acceptable biocompatibility in cardiovascular,bone and gastrointestinal environments,together with Mg-based and Fe-based BMs.However,there is the desire for surface treatment for Zn-based BMs to better control their biodegradation behavior.Firstly,the implantation of some Zn-based BMs in cardiovascular environment exhibited intimal activation with mild inflammation.Secondly,for orthopedic applications,the biodegradation rates of Zn-based BMs are relatively slow,resulting in a long-term retention after fulfilling their mission.Meanwhile,excessive Zn2+release during degradation will cause in vitro cytotoxicity and in vivo delayed osseointegration.In this review,we firstly summarized the current surface modification methods of Zn-based alloys for the industrial applications.Then we comprehensively summarized the recent progress of biomedical bulk Zn-based BMs as well as the corresponding surface modification strategies.Last but not least,the future perspectives towards the design of surface bio-functionalized coatings on Zn-based BMs for orthopedic and cardiovascular applications were also briefly proposed.
基金Centre Québéco is sur les Materiaux FonctionnelsChina Scholarship Council+5 种基金Fonds de Recherche du Québec-Nature et TechnologiesNatural Sciences and Engineering Research Council of CanadaClermont Auvergne MétropoleUniversitéClermont AuvergneI-Site CAP2025Institut National de la Recherche Scientifique。
文摘Benefiting from the advantageous features of high safety,abundant reserves,low cost,and high energy density,aqueous Zn-based rechargeable batteries(AZBs)have received extensive attention as promising candidates for energy storage.To achieve high-performance AZBs with high reversibility and energy density,great efforts have been devoted to overcoming their drawbacks by focusing on the modification of electrode materials and electrolytes.Based on different cathode materials and aqueous electrolytes,the development of aqueous AZBs with different redox mechanisms are discussed in this review,including insertion/extraction chemistries(e.g.,Zn^(2+),alkali metal ion,H^(+),NH_(4)^(+),and so forth dissolution/deposition reactions(e.g.,MnO_(2)/Mn^(2+)),redox couples in flow batteries(e.g.,I_(3)/3I,Br_(2)/Br,and so forth),oxygen electrochemistry(e.g.,O_(2)/OH,O_(2)/O_(2)2),and carbon dioxide electrochemistry(e.g.,CO_(2)/CO,CO_(2)/HCOOH).In particular,the basic reaction mechanisms,issues with the Zn electrode,aqueous electrolytes,and cathode materials as well as their design strategies are systematically reviewed.Finally,the remaining challenges faced by AZBs are summarized,and perspectives for further investigations are proposed.
基金This research was supported by the Fundamental Research Funds for the Central Universities(0515022GH0202253 and 0515022SH0201253).
文摘Due to its high theoretical capacity(820 mAh g^(−1)),low standard electrode potential(−0.76 V vs.SHE),excellent stability in aqueous solutions,low cost,environmental friendliness and intrinsically high safety,zinc(Zn)-based batteries have attracted much attention in developing new energy storage devices.In Zn battery system,the battery performance is significantly affected by the solid electrolyte interface(SEI),which is controlled by electrode and electrolyte,and attracts dendrite growth,electrochemical stability window range,metallic Zn anode corrosion and passivation,and electrolyte mutations.Therefore,the design of SEI is decisive for the overall performance of Zn battery systems.This paper summarizes the formation mechanism,the types and characteristics,and the characterization techniques associated with SEI.Meanwhile,we analyze the influence of SEI on battery performance,and put forward the design strategies of SEI.Finally,the future research of SEI in Zn battery system is prospected to seize the nature of SEI,improve the battery performance and promote the large-scale application.
基金This work was financially supported by Hong Kong Innovation&Technology Fund(ITS/031/18)National Key R&D Program of China(2016YFB0700600)+1 种基金Soft Science Research Project of Guangdong Province(2017B030301013)Shenzhen Science and Technology Research Grant(ZDSYS201707281026184).
文摘Owing to the merits of low cost,high safety and environmental benignity,rechargeable aqueous Zn-based batteries(ZBs)have gained tremendous attention in recent years.Nevertheless,the poor reversibility of Zn anodes that originates from dendrite growth,surface passivation and corrosion,severely hinders the further development of ZBs.To tackle these issues,here we report a Janus separator based on a Zn-ion conductive metal-organic framework(MOF)and reduced graphene oxide(rGO),which is able to regulate uniform Zn2+flux and electron conduction simultaneously during battery operation.Facilitated by the MOF/rGO bifunctional interlayers,the Zn anodes demonstrate stable plating/stripping behavior(over 500 h at 1 mA cm^(−2)),high Coulombic efficiency(99.2%at 2 mA cm^(−2) after 100 cycles)and reduced redox barrier.Moreover,it is also found that the Zn corrosion can be effectively retarded through diminishing the potential discrepancy on Zn surface.Such a separator engineering also saliently promotes the overall performance of Zn|MnO2 full cells,which deliver nearly 100%capacity retention after 2000 cycles at 4 A g^(−1) and high power density over 10 kW kg^(−1).This work provides a feasible route to the high-performance Zn anodes for ZBs.
基金support from the National Natural Science Foundation of China(Nos.21965033,U2003216,22269023,and U2003132)the Key Research and Development Task Special Program of Xinjiang Uygur Autonomous Region(No.2022B01040-3)+2 种基金the Special Projects on Regional Collaborative Innovation-SCO Science and Technology Partnership Program,and the International Science and Technology Cooperation Program(Nos.2022E01020 and 2022E01056)Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2022D01C25)gratefully acknowledged.Z.C.W.acknowledges the European Research Executive Agency(Project 101079184-FUNLAYERS).
文摘Advanced soft ion-conducting hydrogels have been developed rapidly in the integrated portable health monitoring equipment due to their higher sensitivity,sensory traits,tunable conductivity,and stretchability for physiological activities and personal healthcare detection.However,traditional hydrogel conductors are normally susceptible to large deformation and strong mechanical stress,which leads to inferior electro-mechanical stability for real application scenarios.Herein,a strong ionically conductive hydrogel(poly(vinyl alcohol)-boric acid-glycerol/sodium alginate-calcium chloride/electrolyte ions(PBG/SC/EI))was designed by engineering the covalently and ionically crosslinked networks followed by the salting-out effect to further enhance the mechanical strength and ionic conductivity of the hydrogel.Owing to the collective effects of the energy-dissipation mechanism and salting-out effect,the designed PBG/SC/EI with excellent structural integrity and robustness exhibits exceptional mechanical properties(elongation at break for 559.1%and tensile strength of 869.4 kPa)and high ionic conductivity(1.618 S·m^(-1)).As such,the PBG/SC/EI strain sensor features high sensitivity(gauge factor=2.29),which can effectively monitor various kinds of human motions(joint motions,facial micro-expression,faint respiration,and voice recognition).Meanwhile,the hydrogel-based Zn||MnO_(2)battery delivers a high capacity of 267.2 mAh·g^(-1)and a maximal energy density of 356.8 Wh·kg^(-1)associated with good cycle performance of 71.8%capacity retention after 8000 cycles.Additionally,an integrated bio-monitoring system with the sensor and Zn||MnO_(2)battery can accurately identify diverse physiological activities in a real-time and non-invasive way.This work presents a feasible strategy for designing high-performance conductive hydrogels for highly-reliable integrated bio-monitoring systems with excellent practicability.
基金The work was financially supported by the National Natural Science Foundation of China(No.51871077)the Guangdong Basic and Applied Basic Research Foundation(No.2021A1515012626)+1 种基金the Shenzhen Knowledge Innovation Plan-Fundamental Research(Discipline Distribution)(No.JCYJ20180507184623297)the Startup Foundation from Shenzhen and Startup Foundation from Harbin Institute of Technology(Shenzhen),and the Development and Reform Commission of Shenzhen Municipality Shenzhen R&D Center for Al-based Hydrogen Hydrolysis Materials(No.ZX20190229).
文摘Zinc-based degradable metals are considered one of the most promising biodegradable materials due to their moderate corrosion rate,excellent mechanical properties,and good biocompatibility.In this work,biodegradable Zn-0.4Mn-0.8Li alloy was fabricated and rolled in multiple passes at different tem peratures.As the hot rolling temperature increases,the grain size of Zn-0.4Mn-0.8Li alloy was found to increase cor-respondingly.Further,a multi-scale structure with the coexistence of coarse grains and fine grains was obtained.The results demonstrated that the mechanical strength and corrosion resistance were improved by increasing the rolled temperature.It was observed that Zn-0.4Mn-0.8Li alloy with a total reduction of 90%after hot rolling at 325℃ exhibited excellent mechanical and corrosion properties.The cooperation of multi-scale microstructure and twinning was found to improve the strength and guarantee the duc-tility of Zn-0.4Mn-0.8Li alloy significantly so that the 325℃ hot-rolled Zn-0.4Mn-0.8Li alloy has optimal comprehensive properties.Further,yield strength,ultimate tensile strength,and elongation were found to be 449.7±5.3 MPa,505.1±6.5 MPa,and 40.5%±7.5%,respectively.Meanwhile,Zn-0.4Mn-0.8Li al-loy via 325℃ hot-rolled processes also exhibited excellent corrosion resistance.The corrosion current density and corrosion potential were found to be 8.8×10-5 mA cm^(-2)and−0.929 V,respectively.The preliminary study indicates that Zn-0.4Mn-0.8Li alloy is a promising candidate material for medical de-vice applications.
基金This work was financially supported by the Tianjin Natural Sci-ence Foundation(Nos.20JCQNJC00610 and 20JCYBJC00620)the National Natural Science Foundation of China(Nos.51871166 and U1764254).
文摘Nowadays,Zinc(Zn)-based biocomposites as biodegradable implant materials have been recognized as a promising approach to overcome the insufficient mechanical performance of Zn matrix and to endow the Zn-based materials with biofunctionality.However,the strengthening effect on Zn-based matrix compos-ite remains far from expectation mainly due to the poor interfacial bonding between the reinforcement and Zn matrix,and the relatively coarse grain size of the Zn matrix.Herein,we have developed a novel in situ wetting strategy to ameliorate the interfacial bonding and mechanical performance of Zn-Ag-based composites using cuprous oxide-modified graphene oxide(Cu_(2)O-GO)sheets as reinforcement.The en-hanced interfacial bonding between GO sheets and Zn matrix owing to the in situ generated ZnO inter-layer and the ultrafine microstructure with an average grain size of 360 nm were simultaneously achieved in the hot extruded(HEed)1 wt%Cu_(2)O-GO/Zn-2 wt%Ag biocomposites.Consequently,HEed biocompos-ites possessed excellent tensile properties,including ultimate tensile strength(UTS)of 344.0±2.4 MPa,yield stress(YS)of 314.0±4.8 MPa,and elongation at failure of 15.5%±1.3%.Ultrafine and uniform microstructure of the HEed biocomposites resulted in a relatively uniform corrosion morphology and a degradation rate of 0.195±0.004 mm y^(−1) in simulated body fluid(SBF)solution.The 2-fold diluted extract of the HEed biocomposites exhibited satisfying cytocompatibility with MC3T3-E1 pre-osteoblast comparable to that of Ti-6Al-4 V ELI alloys.More importantly,the synergistic effect of metallic ions,Ag-rich nanoparticles,and GO sheets contributed to the remarkable antibacterial activity of the experimental biocomposites against both S.aureus and E.coli.These results demonstrated that the 1Cu_(2)O-GO/Zn-2Ag biocomposites should be anticipated as a promising biodegradable material for orthopedic applications.
基金supported by the Key Research and Development Program of Shanxi Province(No.202102130501007)the Central Leading Science and Technology Development Foundation of Shanxi Province(No.YDZJSX2021A019)+1 种基金the Natural Science Foundation of Shanxi Province(Nos.202103021223102 and 202203021211173)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(Nos.2021SX-AT008 and 2021SX-AT009).
文摘Zn-based materials are promising as bone repair materials,but their poor mechanical property and bioactivity as well as low degradation rate render the potential application.Rational structural and material design can address the concerns.In this study,porous Zn-1 wt.%Mg-3 vol.%β-TCP scaffolds with 40%and 60%preset porosities were fabricated via heating-press sintering using NaCl particles as space holders,and their mechanical properties,in vitro degradation behavior,cytotoxicity and in vivo osteogenic activities were evaluated.The results showed that the actual porosities of the scaffolds were 22%and 50%.Mg exists in the form of Zn 2 Mg and Zn 11 Mg 2,whileβ-TCP evenly distributed in the matrix.The compressive yield strength of scaffolds ranges from approximately 58.46 to 71.04 MPa,which is close to that of cancellous bone.The in vitro degradation tests showed that the corrosion rate of the scaffolds was in the range of about 2.73-4.28 mm y^(-1).Moreover,the scaffolds not only provided great space for osteoblasts adhesion and proliferation in vitro but also possessed favorable degradability and osteogenic activity in vivo.The porous Zn-1 wt.%Mg-3 vol.%β-TCP scaffolds manifest reliable mechanical properties,desirable degradability,and osteogenic activity,which are promising as next-generation bone repair materials.
基金National Natural Science Foundation of China(No.52002149)Guangdong Basic and Applied Basic Research Foundation(No.2020A1515111202)the fellowship of China Postdoctoral Science Foundation(2020M683186)。
文摘Zn-based electrochemical energy storage(EES)systems have received tremendous attention in recent years,but their zinc anodes are seriously plagued by the issues of zinc dendrite and side reactions(e.g.,corrosion and hydrogen evolution).Herein,we report a novel strategy of employing zincophilic Cu nanowire networks to stabilize zinc anodes from multiple aspects.According to experimental results,COMSOL simulation and density functional theory calculations,the Cu nanowire networks covering on zinc anode surface not only homogenize the surface electric field and Zn^(2+)concentration field,but also inhibit side reactions through their hydrophobic feature.Meanwhile,facets and edge sites of the Cu nanowires,especially the latter ones,are revealed to be highly zincophilic to induce uniform zinc nucleation/deposition.Consequently,the Cu nanowire networks-protected zinc anodes exhibit an ultralong cycle life of over 2800 h and also can continuously operate for hundreds of hours even at very large charge/discharge currents and areal capacities(e.g.,10 mA cm^(-2)and 5 mAh cm^(-2)),remarkably superior to bare zinc anodes and most of currently reported zinc anodes,thereby enabling Zn-based EES devices to possess high capacity,16,000-cycle lifespan and rapid charge/discharge ability.This work provides new thoughts to realize long-life and high-rate zinc anodes.
基金Project(20115003)supported by the Program for the Development of Science and Technology of Jilin Province,China
文摘The microstructures and properties of the Zn-Cu-Bi-Sn(ZCBS) high-temperature solders with various Sn contents were studied using differential scanning calorimetry(DSC),scanning electron microscopy(SEM) and X-ray diffraction(XRD).The results indicate that the increase of Sn content can both decrease the melting temperature and melting range of ZCBS solders and it can also effectively improve the wettability on Cu substrate.The shear strength of solder joints reaches a maximum value with the Sn addition of 5%(mass fraction),which is attributed to the formation of refined β-Sn and primary ε-CuZn_5 phases in η-Zn matrix.However,when the content of Sn exceeds 5%,the shear strength decreases due to the formation of coarse β-Sn phase,which is net-shaped presented at the grain boundary.
基金the National Natural Science Foundation of China(21822509 and U1810110)Guangdong Province Innovation and Strong School Project(2020ZDZX2004)+2 种基金Wuyi University(2019WGALH14)Guangzhou Basic and Applied Basic Research Project in China(202102020134)Youth Innovation Talents Project of Guangdong Universities(natural science)in China(2019KQNCX098).
文摘Environmental degradation has promoted the exploitation of novel energy-storage devices.Electrochemical en-ergy technologies,including supercapacitors and aqueous batteries,are highly desirable for energy storage appli-cations.Among them,aqueous zinc-based batteries(AZBs)are highly valued because of their inherent safety and low cost.One class of emerging materials favorably employed in these devices are organic cathodes,featuring resource renewability,cost-effectiveness,and adjustable electrochemical properties via facile structural modi-fication compared to the conventional inorganic cathodes.To date,various types of organic compounds have been developed and applied to AZBs.This paper comprehensively reviews the mechanisms involved in organic electrode material reactions,highlighting the structural modifications,including morphological,molecular,func-tional group,crystal,and electronic structures,affecting the final device performance.Conclusively,the prospects of practical applications of zinc/organic aqueous battery are delineated.
文摘Supercapacitor is considered as one of the most promising energy storage systems because of its high power density, long life and low production cost. Electrode materials play important roles in the performance of Supercapacitor (SC). In this study, Zn-based hydrotalcite structure materials are prepared by hydrothermal method. The influence of Zn/Al ratio in precursors on electrochemical properties of electrode materials is investigated. The results show that Al(III) promotes the formation of relatively ordered active substances and participates in redox reaction on electrode surface. Specific capacitance of Zn-based electrode reaches 2557 F<span style="white-space:nowrap;">·</span>g<sup>-1</sup> (1.0 A<span style="white-space:nowrap;">·</span>g<sup>-1</sup>) at Zn/Al molar ratio of 1:1 in precursors. This method is simple and environmentally friendly. The electrode exhibits excellent electrochemical activity and stability, showing this material application prospect for supercapacitor.
基金supported by Research Fund of Key Laboratory of Fuel Cell Technology of Guangdong ProvinceFoundation for Distinguished Young Talents in Higher Education of Guangdong Province (2012LYM_0134)+1 种基金Science and Technology Planning Project of Zhaoqing City (2012G013)Zhaoqing University with doctoral start-up funds
文摘A Zn-based coordination polymer [Zn（2-cb）2（4,4′-bpy）0.5]n （1, 2-cb = 2-chloro- benzoate, 4,4＇-bpy = 4,4′-bipyridine） was prepared by hydrothermal synthesis using 2-chloro- benzoic acid and 4,4′-bipyridyl as ligands. The compound was characterized by elemental analysis, IR, TGA, and X-ray single-crystal diffraction. The crystal belongs to the monoclinic system, space group PI with a = 8.0471（5）, b = 9.7338（6）, c = 11.7830（7） A, a = 96.2230（10）, β = 92.542（2）, γ = 103.7560（10）°, V = 888.84（9） A3, Z = 2, Mr = 454.57, Dc = 1.698 g/cm3,μ（MoKa） = 1.708 mm.1, F（000） = 458, the final R = 0.0359 and wR = 0.0936 for 3167 observed reflections with I 〉 2σ（I）. The crystal analysis indicates that 1 exhibits a 1-D chain structure constructed by 4,4′-bpy and a dicaryon secondary-building-unit of [Zn2（2-cb）4]. Luminescence analysis revealed that compound 1 emits blue fluorescence with a fluorescence lifetime of 55.03 ns.
基金supported by the NSFC(grant no.21875285)Taishan Scholar Foundation(grant no.ts201511019)+3 种基金Key Research and Development Projects of Shandong Province(grant no.2019JZZY010331)the Strategic Priority Research Program of CAS(grant no.XDB20000000)the Key Research Program of Frontier Sciences,CAS(grant no.QYZDB-SSW-SLH019)the Fundamental Research Funds for the Central Universities(grant no.18CX02047A).
文摘As a highly promising candidate for hydrogen storage,crucial to vehicles powered by fuel cells,metal–organic frameworks(MOFs)have attracted the attention of chemists in recent decades.H_(2) uptake in an MOF is influenced by many factors such as pore size,ligand functionalization,and open metal sites.The synergistic effect of these factors can significantly enhance the H_(2) uptake in an MOF.Herein,we report a twofold interpenetrated MOF(UPC-501)based on a Zn_(4)O(COO)_(6)secondary building unit with the H_(2) uptake of 14.8 mmol g^(−1)(2.96 wt%)at 77 K and 0.1 MPa.This uptake is the highest among all the reported porous Zn-based MOF materials.Both experimental and theoretical results confirm that the reduced pore size derived from twofold interpenetration and the imidazole-functionalized ligand are responsible for the extremely high H_(2) uptake of UPC-501.
基金Supported by China National "95" Project (96-A26-03-02-01) China National "863" Project (2002AA529080) and China-UK, BRICC, CCRI
文摘Two Zn-based sorbents, L-991 and L-992 used for hot gas desulfurization (HGD) were introduced. Zn/Ti ratio of the two sorbent was 1:1 and 2:3 resptively and a certain proportion of Cu and Mn metal oxide were added into L-992, which provided better performance than L-991 in aspects of suitable work temperature, sulfur capacity and agglomeration on the surface of sorbent particles. The evaluation tests were done on both sorbents include multi cycles tests. ARD and SEM analysis were done on fresh and post tests sorbent. During continuous sulfidation/regeneration, the H2S concentra- tion can be reduced from about 10 g/m3 to less than 20 mg/m3, the H2S removal effi- ciency >99 %.
文摘Zhuzhou Group well follows corporate development plan to continue brand strategy.Beside the 300000-ton zinc smelting project in Shuikoushan Economic Development Zone Industrial Park in Changning,Hengyang,Hunan,the company plans to co-establish holdings subsidiary in Nanzhou Industrial Park in Lukou,Zhuzhou,Hunan,to launch a 300000-ton Zn-based material project,with an estimated total investment of RMB 338 million.
