Compared with H13 steel, the influences of different heat treatment process on the microstructure and properties of the new type of hot working die steel H13MOD were studied. The results show that the complete aus ten...Compared with H13 steel, the influences of different heat treatment process on the microstructure and properties of the new type of hot working die steel H13MOD were studied. The results show that the complete aus tenitizing temperature of H13MOD is around 1030 ℃ and the quenching hardness achieves the maximum value at this temperature. While for H13, the complete austenitizing temperature is above 1100 ℃ and the quenching hardness rise constantly with the quenching temperature increasing. In quenching process, the undissolved MC carbides can prevent the coarsening of grain in both steels. With the rise of quenching temperature, when MC carbides dissolve completely, the grain grows quickly. The hardness and strength of H13MOD at higher tempering temperature （above 570 ℃） are nearly the same as those of H13, but its toughness is higher than that of H13. Mo2C carbide is the main strengthening phase in H13MOD, which is attributed to the higher content of Mo. The quantity of VC eutectic car- bides is reduced because of lower content of V in H13MOD, which plays an important role in enhancing the impact toughness of H13MOD. Under a certain strength condition, H13MOD steel can be used in the environment that higher toughness is required and the service life of die casting mold can be improved.展开更多
Considering the fact that high arch dams have problems such as complicated stress,high cost,and hazards after being damaged,this paper intends to study the effects of load,material strength,and safety analysis method ...Considering the fact that high arch dams have problems such as complicated stress,high cost,and hazards after being damaged,this paper intends to study the effects of load,material strength,and safety analysis method on dam safety and working performance of arch dams.In this article,the effects of temperature,self weight exaction way and water loading on structure response are first discussed,and a more reasonable way of considering is then put forward.By taking into consideration the mechanical property of materials and comparing the effects of different yield criteria on overloading safety of high arch dams,this paper concludes that brittle characteristics of concrete should be fully considered when conducting safety assessment for high arch dams to avoid overestimating the bearing capacity of the dams.By comparing several typical projects,this paper works out a safety assessment system of multiple safety and relevant engineering analogical analysis methods,which is closer to the actual situation,and thus is able to assess the response of high arch dam structure in a more comprehensive way,elicit the safety coefficients in different situations,and provide a new way of considering the safety assessment of high arch dams.展开更多
To improve the precision and reliability in predicting methane hazard in working face of coal mine, we have proposed a forecasting and forewarning model for methane hazard based on the least square support vector (LS-...To improve the precision and reliability in predicting methane hazard in working face of coal mine, we have proposed a forecasting and forewarning model for methane hazard based on the least square support vector (LS-SVM) multi-classifier and regression machine. For the forecasting model, the methane concentration can be considered as a nonlinear time series and the time series analysis method is adopted to predict the change in methane concentration using LS-SVM regression. For the forewarning model, which is based on the forecasting results, by the multi-classification method of LS-SVM, the methane hazard was identified to four grades: normal, attention, warning and danger. According to the forewarning results, corresponding measures are taken. The model was used to forecast and forewarn the K9 working face. The results obtained by LS-SVM regression show that the forecast- ing have a high precision and forewarning results based on a LS-SVM multi-classifier are credible. Therefore, it is an effective model building method for continuous prediction of methane concentration and hazard forewarning in working face.展开更多
Proportional direction valve is one of the most fundamental elements in electronic-hydraulic control technique. Its function is to control the operating speed, direction, position, and strength of output force of the ...Proportional direction valve is one of the most fundamental elements in electronic-hydraulic control technique. Its function is to control the operating speed, direction, position, and strength of output force of the hydraulic actuator continuously. Considering the different application and the cost, the existing technique mainly includes the internal feedback valve used in open loop system, and the electronic closed loop controlled valve used in closed loop system. Because of their different mechanical structure and the gre at different in performance, it brings inconvenience for customer to select, also inconvenience for enterprise to produce. Aiming at this problem, the idea of combining the above two kinds of valves into one body is proposed first, and then the new valve＇s structure to realize this target is designed. The idea intends to apply the displacement pilot flow feedback control principle in present 2-position 2-way valve system to the proportional direction valve of 3-position 4-way system. Newly designed feed forward controller can decouple the interference between the internal feedback and the electronic closed loop. Redundant conversion is designed to electronic switch mode. Experiment on dynamic and static characteristic of new proportional direction valve in internal feedback control mode and electronic closed loop control mode is discussed to prove the new theory is correct. Although the new valve is of excellent dynamic response characteristic, its steady control characteristic in open loop control mode needs to be improved further. The research results prepare one new fundamental element for electronic-hydraulic control technology.展开更多
In this paper, we study the M/M/1 queue with working vacations and vacation interruptions. The working vacation is introduced recently, during which the server can still provide service on the original ongoing work at...In this paper, we study the M/M/1 queue with working vacations and vacation interruptions. The working vacation is introduced recently, during which the server can still provide service on the original ongoing work at a lower rate. Meanwhile, we introduce a new policy：, the server can come back from the vacation to the normal working level once some indices of the system, such as the number of customers, achieve a certain value in the vacation period. The server may come back from the vacation without completing the vacation. Such policy is called vacation interruption. We connect the above mentioned two policies and assume that if there are customers in the system after a service completion during the vacation period, the server will come back to the normal working level. In terms of the quasi birth and death process and matrix-geometric solution method, we obtain the distributions and the stochastic decomposition structures for the number of customers and the waiting time and provide some indices of systems.展开更多
As an integrated structure,an arch dam is assumed to bear loads in its design consideration.However,multi-defects,such as cracks and the opening of transverse joints,are unavoidable during construction and operation.M...As an integrated structure,an arch dam is assumed to bear loads in its design consideration.However,multi-defects,such as cracks and the opening of transverse joints,are unavoidable during construction and operation.Multi-defects will reduce the structural integrity and stiffness of the dam and affect its working performance and degree of safety.In the current paper,a numerical model of defects and a simulation method of a high arch dam are introduced.The Chencun arch dam is analyzed as a case study.An entire course simulation analysis of the Chencun arch dam from construction to operation is carried out,through which the opening of the transverse and longitudinal joints,formation of cracks,and their influence on deformation and stress of the dam are studied.According to the results of the analysis,appropriate measures should be adopted to prevent the development of cracks,and observation should be strengthened for a more timely discovery of risks.展开更多
Gas-solid two-phase flow theory was used to predict dust distribution and movement at the working face of a mine.The software package FLUENT was used to numerically simulate dust motion and the results were compared t...Gas-solid two-phase flow theory was used to predict dust distribution and movement at the working face of a mine.The software package FLUENT was used to numerically simulate dust motion and the results were compared to observed data.The simulation agrees with the data taken from an actual working face,which confirms the choice of mathematical model and numerical simulation method. Using the model we predict a set of conditions optimum for reducing dust concentrations at the mine working face.展开更多
One main challenge for phosphate cathodes in sodium-ion batteries(SIBs)is to increase the working voltage and energy density to promote its practicability.Herein,an advanced Na3V2(PO4)2F3@C cathode is prepared success...One main challenge for phosphate cathodes in sodium-ion batteries(SIBs)is to increase the working voltage and energy density to promote its practicability.Herein,an advanced Na3V2(PO4)2F3@C cathode is prepared successfully for sodium-ion full cells.It is revealed that,carbon coating can not only enhance the electronic conductivity and electrode kinetics of Na3V2(PO4)2F3@C and inhibit the growth of particles(i.e.,shorten the Na^+-migration path),but also unexpectedly for the first time adjust the dis-/charging plateaux at different voltage ranges to increase the mean voltage(from 3.59 to 3.71 V)and energy density from 336.0 to 428.5 Wh kg^-1 of phosphate cathode material.As a result,when used as cathode for SIBs,the prepared Na3V2(PO4)2F3@C delivers much improved electrochemical properties in terms of larger specifc capacity(115.9 vs.93.5 mAh g^-1),more outstanding high-rate capability(e.g.,87.3 vs.60.5 mAh g^-1 at 10 C),higher energy density,and better cycling performance,compared to pristine Na3V2(PO4)2F3.Reasons for the enhanced electrochemical properties include ionicity enhancement of lattice induced by carbon coating,improved electrode kinetics and electronic conductivity,and high stability of lattice,which is elucidated clearly through the contrastive characterization and electrochemical studies.Moreover,excellent energy-storage performance in sodium-ion full cells further demonstrate the extremely high possibility of Na3V2(PO4)2F3@C cathode for practical applications.展开更多
The front abutment pressure of a fully-mechanized workface of 11061 soft coal isolated island of Liangbei Coal Mine was measured and studied using a self-developed mining-induced stress monitoring system associated wi...The front abutment pressure of a fully-mechanized workface of 11061 soft coal isolated island of Liangbei Coal Mine was measured and studied using a self-developed mining-induced stress monitoring system associated with electromagnetic radiation technology, and the effects of abutment pressure distribution on strata behavior we discussed. The results indicate that the miningdnduced influencing distance advanced at the fully-mechanized working face of soft coal isolated island is larger than that at the gen- eral working face at the isolated island, besides the fracture zone in front of working face was widened to some extent, and the influencing range caused by relaxations on both roadways became bigger with the advancing working face. Moreover, it can be indicated that mining has significant effect on strata behav- ior of fully-mechanized working face of soft coal isolated island, which is mostly distributed in the area of stress concentration. The research results have an important reference value for revealing the distribution pattern of the front abutment pressure of a fully-mechanized working face of soft coal isolated island, and controlling the coal-rock dynamic disaster occurrence under similar mining conditions.展开更多
To study the occurrence mechanism of rock burst during mining the irregular working face,the study took irregular panel 7447 near fault tectonic as an engineering background.The spatial fracture characteristic of over...To study the occurrence mechanism of rock burst during mining the irregular working face,the study took irregular panel 7447 near fault tectonic as an engineering background.The spatial fracture characteristic of overlying strata was analyzed by Winkler elastic foundation beam theory.Furthermore,the influence law of panel width to suspended width and limit breaking span of key strata were also analyzed by thin plate theory.Through micro-seismic monitoring,theoretical analysis,numerical simulation and working resistance of support of field measurement,this study investigated the fracture characteristic of overlying strata and mechanism of rock burst in irregular working face.The results show that the fracture characteristic of overlying strata shows a spatial trapezoid structure,with the main roof being as an undersurface.The fracture form changes from vertical‘‘O-X"type to transverse‘‘O-X"type with the increase of trapezoidal height.From the narrow mining face to the wide mining face,the suspended width of key strata is greater than its limit breaking width,and a strong dynamic load is produced by the fracture of key strata.The numerical simulation and micro-seismic monitoring results show that the initial fracture position of key strata is close to tailgate 7447.Also there is a high static load caused by fault tectonic.The dynamic and static combined load induce rock burst.Accordingly,a cooperative control technology was proposed,which can weaken dynamic load by hard roof directional hydraulic fracture and enhance surrounding rock by supporting system.展开更多
The behavior evolvement of Mg-7.22Gd-4.84Y-1.26Nd-0.58Zr（GWN751K） magnesium alloy during the hot deformation process was discussed.The flow stress behavior of the magnesium alloy over the strain rate range of 0.002 ...The behavior evolvement of Mg-7.22Gd-4.84Y-1.26Nd-0.58Zr（GWN751K） magnesium alloy during the hot deformation process was discussed.The flow stress behavior of the magnesium alloy over the strain rate range of 0.002 to 2.000 s^-1 and in the temperature range of 623 to 773 K was studied on a Gleeble-1500D hot simulator under the maximum deformation degree of 60%.The experimental results showed that the relationship between stress and strain was obviously affected by strain rate and deformation temperature.The flow stress of GWN751K magnesium alloy during high temperature deformation could be represented by the Zener-Hollomon parameter in the hyperbolic Arrhenius-type equation.The stress exponent n and deformation activation energy Q were evaluated by linear regression analysis.The stress exponent n was fitted to be 3.16.The hot deformation activation energy of the alloy during hot deformation was 230.03 kJ/mol.The microstructures of hot deformation were also influenced by strain rate and compression temperature strongly.It was found that the alloy could be extruded at 723 K with the mechanical properties of σ0.2 = 260 MPa,σb = 320 MPa,and δ = 18%.展开更多
During shaft constructing, a borehole water inflow of 30 m3/h was encountered in Liu Yuanzi Coal Mine in the southwestern Ordos Basin, whose aquifer is mainly cretaceous. On the basis of regional hydrogeological condi...During shaft constructing, a borehole water inflow of 30 m3/h was encountered in Liu Yuanzi Coal Mine in the southwestern Ordos Basin, whose aquifer is mainly cretaceous. On the basis of regional hydrogeological conditions, a mercury intrusion method and scanning electron microscope were used in this study. We conclude that the loose, porous and easily collapsible clay particles of the cretaceous aquifer rock mass were the major geological cause for water hazards during the construction of the shaft. We propose an approach of chemical grouting from the working surface and in the end succeeded in blocking the water.展开更多
Maximum power output of a class of irreversible non-regeneration heat engines with non-uniform working fluid,in which heat transfers between the working fluid and the heat reservoirs obey the linear phenomenological h...Maximum power output of a class of irreversible non-regeneration heat engines with non-uniform working fluid,in which heat transfers between the working fluid and the heat reservoirs obey the linear phenomenological heat transfer law [q ∝Δ(T-1)],are studied in this paper. Optimal control theory is used to determine the upper bounds of power of the heat engine for the lumped-parameter model and the distributed-parameter model,respectively. The results show that the maximum power output of the heat engine in the distributed-parameter model is less than or equal to that in the lumped-parameter model,which could provide more realistic guidelines for real heat engines. Analytical solutions of the maximum power output are obtained for the irreversible heat engines working between constant temperature reservoirs. For the irreversible heat engine operating between variable temperature reservoirs,a numerical example for the lumped-parameter model is provided by numerical calculation. The effects of changes of reservoir's temperature on the maximum power of the heat engine are analyzed. The obtained results are,in addition,compared with those obtained with Newtonian heat transfer law [q ∝Δ(T)].展开更多
Taking cemented coal gangue pipeline transportation system in Suncun Coal Mine, Xinwen Mining Group, Shandong Province, China, as an example, the hydraulic calculation approaches and process about gravity pipeline tra...Taking cemented coal gangue pipeline transportation system in Suncun Coal Mine, Xinwen Mining Group, Shandong Province, China, as an example, the hydraulic calculation approaches and process about gravity pipeline transportation of backfill slurry were investigated. The results show that the backfill capability of the backfill system should be higher than 74.4 m3/h according to the mining production and backfill times in the mine; the minimum velocity (critical velocity) and practical working velocity of the backfill slurry are 1.44 and 3.82 m/s, respectively. Various formulae give the maximum ratio of total length to vertical height of pipeline (L/H ratio) of the backfill system of 5.4, and then the reliability and capability of the system can be evaluated.展开更多
文摘Compared with H13 steel, the influences of different heat treatment process on the microstructure and properties of the new type of hot working die steel H13MOD were studied. The results show that the complete aus tenitizing temperature of H13MOD is around 1030 ℃ and the quenching hardness achieves the maximum value at this temperature. While for H13, the complete austenitizing temperature is above 1100 ℃ and the quenching hardness rise constantly with the quenching temperature increasing. In quenching process, the undissolved MC carbides can prevent the coarsening of grain in both steels. With the rise of quenching temperature, when MC carbides dissolve completely, the grain grows quickly. The hardness and strength of H13MOD at higher tempering temperature （above 570 ℃） are nearly the same as those of H13, but its toughness is higher than that of H13. Mo2C carbide is the main strengthening phase in H13MOD, which is attributed to the higher content of Mo. The quantity of VC eutectic car- bides is reduced because of lower content of V in H13MOD, which plays an important role in enhancing the impact toughness of H13MOD. Under a certain strength condition, H13MOD steel can be used in the environment that higher toughness is required and the service life of die casting mold can be improved.
基金Supported by the National Natural Science Foundation of China (Grant Nos.50539010,50539020 and 50539120)
文摘Considering the fact that high arch dams have problems such as complicated stress,high cost,and hazards after being damaged,this paper intends to study the effects of load,material strength,and safety analysis method on dam safety and working performance of arch dams.In this article,the effects of temperature,self weight exaction way and water loading on structure response are first discussed,and a more reasonable way of considering is then put forward.By taking into consideration the mechanical property of materials and comparing the effects of different yield criteria on overloading safety of high arch dams,this paper concludes that brittle characteristics of concrete should be fully considered when conducting safety assessment for high arch dams to avoid overestimating the bearing capacity of the dams.By comparing several typical projects,this paper works out a safety assessment system of multiple safety and relevant engineering analogical analysis methods,which is closer to the actual situation,and thus is able to assess the response of high arch dam structure in a more comprehensive way,elicit the safety coefficients in different situations,and provide a new way of considering the safety assessment of high arch dams.
基金Project 50674111 supported by the National Natural Science Foundation of China
文摘To improve the precision and reliability in predicting methane hazard in working face of coal mine, we have proposed a forecasting and forewarning model for methane hazard based on the least square support vector (LS-SVM) multi-classifier and regression machine. For the forecasting model, the methane concentration can be considered as a nonlinear time series and the time series analysis method is adopted to predict the change in methane concentration using LS-SVM regression. For the forewarning model, which is based on the forecasting results, by the multi-classification method of LS-SVM, the methane hazard was identified to four grades: normal, attention, warning and danger. According to the forewarning results, corresponding measures are taken. The model was used to forecast and forewarn the K9 working face. The results obtained by LS-SVM regression show that the forecast- ing have a high precision and forewarning results based on a LS-SVM multi-classifier are credible. Therefore, it is an effective model building method for continuous prediction of methane concentration and hazard forewarning in working face.
基金supported by National Natural Science Foundation of China (Grant No. 50575156)Shanxi Provincial Natural Science Foundation of China (Grant No. 2008011053)
文摘Proportional direction valve is one of the most fundamental elements in electronic-hydraulic control technique. Its function is to control the operating speed, direction, position, and strength of output force of the hydraulic actuator continuously. Considering the different application and the cost, the existing technique mainly includes the internal feedback valve used in open loop system, and the electronic closed loop controlled valve used in closed loop system. Because of their different mechanical structure and the gre at different in performance, it brings inconvenience for customer to select, also inconvenience for enterprise to produce. Aiming at this problem, the idea of combining the above two kinds of valves into one body is proposed first, and then the new valve＇s structure to realize this target is designed. The idea intends to apply the displacement pilot flow feedback control principle in present 2-position 2-way valve system to the proportional direction valve of 3-position 4-way system. Newly designed feed forward controller can decouple the interference between the internal feedback and the electronic closed loop. Redundant conversion is designed to electronic switch mode. Experiment on dynamic and static characteristic of new proportional direction valve in internal feedback control mode and electronic closed loop control mode is discussed to prove the new theory is correct. Although the new valve is of excellent dynamic response characteristic, its steady control characteristic in open loop control mode needs to be improved further. The research results prepare one new fundamental element for electronic-hydraulic control technology.
基金This work was supported in part by National Natural Science Foundation of China under Grant No. 10671170.5. Acknowledgment The authors thank to the anonymous referees for their insightful comments and suggestions, which are very helpful to improve the presentations of the paper.
文摘In this paper, we study the M/M/1 queue with working vacations and vacation interruptions. The working vacation is introduced recently, during which the server can still provide service on the original ongoing work at a lower rate. Meanwhile, we introduce a new policy：, the server can come back from the vacation to the normal working level once some indices of the system, such as the number of customers, achieve a certain value in the vacation period. The server may come back from the vacation without completing the vacation. Such policy is called vacation interruption. We connect the above mentioned two policies and assume that if there are customers in the system after a service completion during the vacation period, the server will come back to the normal working level. In terms of the quasi birth and death process and matrix-geometric solution method, we obtain the distributions and the stochastic decomposition structures for the number of customers and the waiting time and provide some indices of systems.
基金supported by the National Key Technology R&D Program (Grant No.2008BAB29B05)the National Natural Science Foundation of China(Grant No.50909105)+1 种基金the Public Industry Research Special Funds of MWR(Grant No.200801007)the Research Special Funds of IWHR
文摘As an integrated structure,an arch dam is assumed to bear loads in its design consideration.However,multi-defects,such as cracks and the opening of transverse joints,are unavoidable during construction and operation.Multi-defects will reduce the structural integrity and stiffness of the dam and affect its working performance and degree of safety.In the current paper,a numerical model of defects and a simulation method of a high arch dam are introduced.The Chencun arch dam is analyzed as a case study.An entire course simulation analysis of the Chencun arch dam from construction to operation is carried out,through which the opening of the transverse and longitudinal joints,formation of cracks,and their influence on deformation and stress of the dam are studied.According to the results of the analysis,appropriate measures should be adopted to prevent the development of cracks,and observation should be strengthened for a more timely discovery of risks.
基金supported by the Special Foundation for Doctor Degree of the Ministry of Education(No.2006008001)the Construction Project of Beijing Municipal Education Committee (No.XK100080432)the Joint Development Project of Beijing.
文摘Gas-solid two-phase flow theory was used to predict dust distribution and movement at the working face of a mine.The software package FLUENT was used to numerically simulate dust motion and the results were compared to observed data.The simulation agrees with the data taken from an actual working face,which confirms the choice of mathematical model and numerical simulation method. Using the model we predict a set of conditions optimum for reducing dust concentrations at the mine working face.
基金supported by the National Natural Science Foundation of China(91963118)the Fundamental Research Funds for the Central Universities(2412019ZD010).
文摘One main challenge for phosphate cathodes in sodium-ion batteries(SIBs)is to increase the working voltage and energy density to promote its practicability.Herein,an advanced Na3V2(PO4)2F3@C cathode is prepared successfully for sodium-ion full cells.It is revealed that,carbon coating can not only enhance the electronic conductivity and electrode kinetics of Na3V2(PO4)2F3@C and inhibit the growth of particles(i.e.,shorten the Na^+-migration path),but also unexpectedly for the first time adjust the dis-/charging plateaux at different voltage ranges to increase the mean voltage(from 3.59 to 3.71 V)and energy density from 336.0 to 428.5 Wh kg^-1 of phosphate cathode material.As a result,when used as cathode for SIBs,the prepared Na3V2(PO4)2F3@C delivers much improved electrochemical properties in terms of larger specifc capacity(115.9 vs.93.5 mAh g^-1),more outstanding high-rate capability(e.g.,87.3 vs.60.5 mAh g^-1 at 10 C),higher energy density,and better cycling performance,compared to pristine Na3V2(PO4)2F3.Reasons for the enhanced electrochemical properties include ionicity enhancement of lattice induced by carbon coating,improved electrode kinetics and electronic conductivity,and high stability of lattice,which is elucidated clearly through the contrastive characterization and electrochemical studies.Moreover,excellent energy-storage performance in sodium-ion full cells further demonstrate the extremely high possibility of Na3V2(PO4)2F3@C cathode for practical applications.
基金supported by the National Natural Science Foundation of China (Nos. 40874070,40904028 and 51104156)the Self-Researched Subject of State Key Laboratory of Coal Resources and Mine Safety (No. SKLCRSM09X01)the Specialized Fund for the Basic Research Operating Expenses Program of Central College (No. 2010QNB01)
文摘The front abutment pressure of a fully-mechanized workface of 11061 soft coal isolated island of Liangbei Coal Mine was measured and studied using a self-developed mining-induced stress monitoring system associated with electromagnetic radiation technology, and the effects of abutment pressure distribution on strata behavior we discussed. The results indicate that the miningdnduced influencing distance advanced at the fully-mechanized working face of soft coal isolated island is larger than that at the gen- eral working face at the isolated island, besides the fracture zone in front of working face was widened to some extent, and the influencing range caused by relaxations on both roadways became bigger with the advancing working face. Moreover, it can be indicated that mining has significant effect on strata behav- ior of fully-mechanized working face of soft coal isolated island, which is mostly distributed in the area of stress concentration. The research results have an important reference value for revealing the distribution pattern of the front abutment pressure of a fully-mechanized working face of soft coal isolated island, and controlling the coal-rock dynamic disaster occurrence under similar mining conditions.
基金supported by the Key Project of National Natural Science Foundation of China (No. 51634001)the National Natural Science Foundation of China (Nos. 51404269 and 51674253)+1 种基金the State Key Research Development Program of China (No. 2016YFC0801403)the Key Research Development Program of Jiangsu Province, China (No. BE2015040)
文摘To study the occurrence mechanism of rock burst during mining the irregular working face,the study took irregular panel 7447 near fault tectonic as an engineering background.The spatial fracture characteristic of overlying strata was analyzed by Winkler elastic foundation beam theory.Furthermore,the influence law of panel width to suspended width and limit breaking span of key strata were also analyzed by thin plate theory.Through micro-seismic monitoring,theoretical analysis,numerical simulation and working resistance of support of field measurement,this study investigated the fracture characteristic of overlying strata and mechanism of rock burst in irregular working face.The results show that the fracture characteristic of overlying strata shows a spatial trapezoid structure,with the main roof being as an undersurface.The fracture form changes from vertical‘‘O-X"type to transverse‘‘O-X"type with the increase of trapezoidal height.From the narrow mining face to the wide mining face,the suspended width of key strata is greater than its limit breaking width,and a strong dynamic load is produced by the fracture of key strata.The numerical simulation and micro-seismic monitoring results show that the initial fracture position of key strata is close to tailgate 7447.Also there is a high static load caused by fault tectonic.The dynamic and static combined load induce rock burst.Accordingly,a cooperative control technology was proposed,which can weaken dynamic load by hard roof directional hydraulic fracture and enhance surrounding rock by supporting system.
基金supported by the National Key Basic Research and Development Program (Nos.2 007CB613704 and 2007CB613705)
文摘The behavior evolvement of Mg-7.22Gd-4.84Y-1.26Nd-0.58Zr（GWN751K） magnesium alloy during the hot deformation process was discussed.The flow stress behavior of the magnesium alloy over the strain rate range of 0.002 to 2.000 s^-1 and in the temperature range of 623 to 773 K was studied on a Gleeble-1500D hot simulator under the maximum deformation degree of 60%.The experimental results showed that the relationship between stress and strain was obviously affected by strain rate and deformation temperature.The flow stress of GWN751K magnesium alloy during high temperature deformation could be represented by the Zener-Hollomon parameter in the hyperbolic Arrhenius-type equation.The stress exponent n and deformation activation energy Q were evaluated by linear regression analysis.The stress exponent n was fitted to be 3.16.The hot deformation activation energy of the alloy during hot deformation was 230.03 kJ/mol.The microstructures of hot deformation were also influenced by strain rate and compression temperature strongly.It was found that the alloy could be extruded at 723 K with the mechanical properties of σ0.2 = 260 MPa,σb = 320 MPa,and δ = 18%.
基金Financial support from the National Natural Science Foundation of China (No.40772191)
文摘During shaft constructing, a borehole water inflow of 30 m3/h was encountered in Liu Yuanzi Coal Mine in the southwestern Ordos Basin, whose aquifer is mainly cretaceous. On the basis of regional hydrogeological conditions, a mercury intrusion method and scanning electron microscope were used in this study. We conclude that the loose, porous and easily collapsible clay particles of the cretaceous aquifer rock mass were the major geological cause for water hazards during the construction of the shaft. We propose an approach of chemical grouting from the working surface and in the end succeeded in blocking the water.
基金Supported by the Program for New Century Excellent Talents in University of China (Grant No. 20041006)the Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200136)
文摘Maximum power output of a class of irreversible non-regeneration heat engines with non-uniform working fluid,in which heat transfers between the working fluid and the heat reservoirs obey the linear phenomenological heat transfer law [q ∝Δ(T-1)],are studied in this paper. Optimal control theory is used to determine the upper bounds of power of the heat engine for the lumped-parameter model and the distributed-parameter model,respectively. The results show that the maximum power output of the heat engine in the distributed-parameter model is less than or equal to that in the lumped-parameter model,which could provide more realistic guidelines for real heat engines. Analytical solutions of the maximum power output are obtained for the irreversible heat engines working between constant temperature reservoirs. For the irreversible heat engine operating between variable temperature reservoirs,a numerical example for the lumped-parameter model is provided by numerical calculation. The effects of changes of reservoir's temperature on the maximum power of the heat engine are analyzed. The obtained results are,in addition,compared with those obtained with Newtonian heat transfer law [q ∝Δ(T)].
基金Project(50490270) supported by the National Natural Science Foundation of China
文摘Taking cemented coal gangue pipeline transportation system in Suncun Coal Mine, Xinwen Mining Group, Shandong Province, China, as an example, the hydraulic calculation approaches and process about gravity pipeline transportation of backfill slurry were investigated. The results show that the backfill capability of the backfill system should be higher than 74.4 m3/h according to the mining production and backfill times in the mine; the minimum velocity (critical velocity) and practical working velocity of the backfill slurry are 1.44 and 3.82 m/s, respectively. Various formulae give the maximum ratio of total length to vertical height of pipeline (L/H ratio) of the backfill system of 5.4, and then the reliability and capability of the system can be evaluated.
