In normal pressure of reservoir, formation pressure and depth can not fully reflect the linear relationship between the formation pressure with depth, the change rule of reservoir measured formation pressure and often...In normal pressure of reservoir, formation pressure and depth can not fully reflect the linear relationship between the formation pressure with depth, the change rule of reservoir measured formation pressure and often reduced pressure, understanding unclear cause fluid properties. By introducing basic principles of hydrostatics. The relationship between pressure coefficient and mathematical depth is discussed by mathematical induction analysis of measured pressure data of nearly 50 normal pressure reservoirs in Bohai Oilfield. The results show that the reservoir pressure data is linearly distributed with depth, and the pressure coefficient is inversely proportional to depth. When the depth becomes shallower, the pressure coefficient increases and approaches the reservoir level. As the depth increases, the pressure coefficient decreases and approaches the hydrostatic pressure coefficient infinitely. The study can more accurately analyze the reservoir pressure changes, which is helpful to study the oil and water distribution, reservoir connectivity and fluid properties of atmospheric pressure reservoirs.展开更多
The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil a...The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.展开更多
文摘In normal pressure of reservoir, formation pressure and depth can not fully reflect the linear relationship between the formation pressure with depth, the change rule of reservoir measured formation pressure and often reduced pressure, understanding unclear cause fluid properties. By introducing basic principles of hydrostatics. The relationship between pressure coefficient and mathematical depth is discussed by mathematical induction analysis of measured pressure data of nearly 50 normal pressure reservoirs in Bohai Oilfield. The results show that the reservoir pressure data is linearly distributed with depth, and the pressure coefficient is inversely proportional to depth. When the depth becomes shallower, the pressure coefficient increases and approaches the reservoir level. As the depth increases, the pressure coefficient decreases and approaches the hydrostatic pressure coefficient infinitely. The study can more accurately analyze the reservoir pressure changes, which is helpful to study the oil and water distribution, reservoir connectivity and fluid properties of atmospheric pressure reservoirs.
文摘The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.
