An aviation hydraulic axial piston pump＇s degradation fiom comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char- acteristics must be factored into ...An aviation hydraulic axial piston pump＇s degradation fiom comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char- acteristics must be factored into the estimation. The internal wear status of the axial piston pump is characterized by the return oil flow based on fault mechanism analysis of the main frictional pairs in the pump. The performance degradation model is described by the Wiener process to predict the remaining useful life （RUL） of the pump. Maximum likelihood estimation （MLE） is performed by utilizing the expectation maximization （EM） algorithm to estimate the initial parameters of the Wiener process while recursive estimation is conducted utilizing the Kalman filter method to estimate the drift coefficient of the Wiener process. The RUL of the pump is then calculated accord- ing to the performance degradation model based on the Wiener process. Experimental results indi- cate that the return oil flow is a suitable characteristic for reflecting the internal wear status of the axial piston pump, and thus the Wiener process-based method may effectively predicate the RUL of the pump.展开更多
Real time remaining useful life(RUL) prediction based on condition monitoring is an essential part in condition based maintenance(CBM). In the current methods about the real time RUL prediction of the nonlinear degrad...Real time remaining useful life(RUL) prediction based on condition monitoring is an essential part in condition based maintenance(CBM). In the current methods about the real time RUL prediction of the nonlinear degradation process, the measurement error is not considered and forecasting uncertainty is large. Therefore, an approximate analytical RUL distribution in a closed-form of a nonlinear Wiener based degradation process with measurement errors was proposed. The maximum likelihood estimation approach was used to estimate the unknown fixed parameters in the proposed model. When the newly observed data are available, the random parameter is updated by the Bayesian method to make the estimation adapt to the item's individual characteristic and reduce the uncertainty of the estimation. The simulation results show that considering measurement errors in the degradation process can significantly improve the accuracy of real time RUL prediction.展开更多
Remaining useful life(RUL) estimation based on condition monitoring data is central to condition based maintenance(CBM). In the current methods about the Wiener process based RUL estimation, the randomness of the fail...Remaining useful life(RUL) estimation based on condition monitoring data is central to condition based maintenance(CBM). In the current methods about the Wiener process based RUL estimation, the randomness of the failure threshold has not been studied thoroughly. In this work, by using the truncated normal distribution to model random failure threshold(RFT), an analytical and closed-form RUL distribution based on the current observed data was derived considering the posterior distribution of the drift parameter. Then, the Bayesian method was used to update the prior estimation of failure threshold. To solve the uncertainty of the censored in situ data of failure threshold, the expectation maximization(EM) algorithm is used to calculate the posteriori estimation of failure threshold. Numerical examples show that considering the randomness of the failure threshold and updating the prior information of RFT could improve the accuracy of real time RUL estimation.展开更多
For 1≤ p 【 ∞, firstly we prove that for an arbitrary set of distinct nodes in [-1, 1], it is impossible that the errors of the Hermite-Fejr interpolation approximation in L p -norm are weakly equivalent to the corr...For 1≤ p 【 ∞, firstly we prove that for an arbitrary set of distinct nodes in [-1, 1], it is impossible that the errors of the Hermite-Fejr interpolation approximation in L p -norm are weakly equivalent to the corresponding errors of the best polynomial approximation for all continuous functions on [-1, 1]. Secondly, on the ground of probability theory, we discuss the p-average errors of Hermite-Fejr interpolation sequence based on the extended Chebyshev nodes of the second kind on the Wiener space. By our results we know that for 1≤ p 【 ∞ and 2≤ q 【 ∞, the p-average errors of Hermite-Fejr interpolation approximation sequence based on the extended Chebyshev nodes of the second kind are weakly equivalent to the p-average errors of the corresponding best polynomial approximation sequence for L q -norm approximation. In comparison with these results, we discuss the p-average errors of Hermite-Fejr interpolation approximation sequence based on the Chebyshev nodes of the second kind and the p-average errors of the well-known Bernstein polynomial approximation sequence on the Wiener space.展开更多
The future of control in cyberspace of parallel worlds is discussed. It argues for the coming age of Control 5.0,the control technology for the new IT capable of dealing with artificial worlds with VR, AR, AI and robo...The future of control in cyberspace of parallel worlds is discussed. It argues for the coming age of Control 5.0,the control technology for the new IT capable of dealing with artificial worlds with VR, AR, AI and robotics. The discipline of automation needs a new interpretation of its core knowledge and skill set of modeling, analysis, and control for cyber-socialphysical systems, and a paradigm shift from Newtonian Systems with Newton's Laws or Big Laws with Small Data to Mertonian Systems with Merton's Laws or Small Laws with Big Data.展开更多
An adaptive method of residual life estimation for deteriorated products with two performance characteristics (PCs) was proposed, which was sharply different from existing work that only utilized one-dimensional degra...An adaptive method of residual life estimation for deteriorated products with two performance characteristics (PCs) was proposed, which was sharply different from existing work that only utilized one-dimensional degradation data. Once new degradation information was available, the residual life of the product being monitored could be estimated in an adaptive manner. Here, it was assumed that the degradation of each PC over time was governed by a Wiener degradation process and the dependency between them was characterized by the Frank copula function. A bivariate Wiener process model with measurement errors was used to model the degradation measurements. A two-stage method and the Markov chain Monte Carlo (MCMC) method were combined to estimate the unknown parameters in sequence. Results from a numerical example about fatigue cracks show that the proposed method is valid as the relative error is small.展开更多
We study the random dynamical system （RDS） generated by the Benald flow problem with multiplicative noise and prove the existence of a compact random attractor for such RDS.
Based on low illumination and a large number of mixed noises contained in coal mine, denoising with one method usually cannot achieve good results, so a multi-level image denoising method based on wavelet correlation ...Based on low illumination and a large number of mixed noises contained in coal mine, denoising with one method usually cannot achieve good results, so a multi-level image denoising method based on wavelet correlation relevant inter-scale is presented. Firstly, we used directional median filter to effectively reduce impulse noise in the spatial domain, which is the main cause of noise in mine. Secondly, we used a Wiener filtration method to mainly reduce the Gaussian noise, and then finally used a multi-wavelet transform to minimize the remaining noise of low-light images in the transform domain. This multi-level image noise reduction method combines spatial and transform domain denoising to enhance benefits, and effectively reduce impulse noise and Gaussian noise in a coal mine, while retaining good detailed image characteristics of the underground for improving quality of images with mixing noise and effective low-light environment.展开更多
The author discusses a variational equation which has a solution of even function, i.e.a differential equation with some inequality constraints.This problem originated from adiscounted cost problem in singular stochas...The author discusses a variational equation which has a solution of even function, i.e.a differential equation with some inequality constraints.This problem originated from adiscounted cost problem in singular stochastic control. Common analysis and stochastic anal-lysis are applied in this note.展开更多
A low-complexity method for direction of arrival（DOA） estimation based on estimation signal parameters via rotational invariance technique（ESPRIT） is proposed.Instead of using the cross-correlation vectors in mult...A low-complexity method for direction of arrival（DOA） estimation based on estimation signal parameters via rotational invariance technique（ESPRIT） is proposed.Instead of using the cross-correlation vectors in multistage Wiener filter（MSWF）,the orthogonal residual vectors obtained in conjugate gradient（CG） method span the signal subspace used by ESPRIT.The computational complexity of the proposed method is significantly reduced,since the signal subspace estimation mainly needs two matrixvector complex multiplications at the iteration of data level.Furthermore,the prior training data are not needed in the proposed method.To overcome performance degradation at low signal to noise ratio（SNR）,the expanded signal subspace spanned by more basis vectors is used and simultaneously renders ESPRIT yield redundant DOAs,which can be excluded by performing ESPRIT once more using the unexpanded signal subspace.Compared with the traditional ESPRIT methods by MSWF and eigenvalue decomposition（EVD）,numerical results demonstrate the satisfactory performance of the proposed method.展开更多
Nonlinearity and implicitness are common degradation features of the stochastic degradation equipment for prognostics.These features have an uncertain effect on the remaining useful life(RUL)prediction of the equipmen...Nonlinearity and implicitness are common degradation features of the stochastic degradation equipment for prognostics.These features have an uncertain effect on the remaining useful life(RUL)prediction of the equipment.The current data-driven RUL prediction method has not systematically studied the nonlinear hidden degradation modeling and the RUL distribution function.This paper uses the nonlinear Wiener process to build a dual nonlinear implicit degradation model.Based on the historical measured data of similar equipment,the maximum likelihood estimation algorithm is used to estimate the fixed coefficients and the prior distribution of a random coefficient.Using the on-site measured data of the target equipment,the posterior distribution of a random coefficient and actual degradation state are step-by-step updated based on Bayesian inference and the extended Kalman filtering algorithm.The analytical form of the RUL distribution function is derived based on the first hitting time distribution.Combined with the two case studies,the proposed method is verified to have certain advantages over the existing methods in the accuracy of prediction.展开更多
The value range of the failure threshold will generate an uncertain influence on the prediction results for the remaining useful life(RUL) of equipment. Most of the existing studies on the RUL prediction assume that t...The value range of the failure threshold will generate an uncertain influence on the prediction results for the remaining useful life(RUL) of equipment. Most of the existing studies on the RUL prediction assume that the failure threshold is a fixed value,as they have difficulty in reflecting the random variation of the failure threshold. In connection with the inadequacies of the existing research, an in-depth analysis is carried out to study the effect of the random failure threshold(RFT) on the prediction results for the RUL. First, a nonlinear degradation model with unit-to-unit variability and measurement error is established based on the nonlinear Wiener process. Second, the expectation-maximization(EM) algorithm is used to solve the estimated values of the parameters of the prior degradation model, and the Bayesian method is used to iteratively update the posterior distribution of the random coefficients. Then, the effects of three types of RFT constraint conditions on the prediction results for the RUL are analyzed, and the probability density function(PDF) of the RUL is derived. Finally,the degradation data of aero-turbofan engines are used to verify the correctness and advantages of the method.展开更多
For the weighted approximation in Lp-norm, we determine the asymptotic order for the p- average errors of Lagrange interpolation sequence based on the Chebyshev nodes on the Wiener space. We also determine its value i...For the weighted approximation in Lp-norm, we determine the asymptotic order for the p- average errors of Lagrange interpolation sequence based on the Chebyshev nodes on the Wiener space. We also determine its value in some special case.展开更多
This paper deals with Wiener model based predictive control of a pH neutralization process.The dynamic linear block of the Wiener model is parameterized using Laguerre filters while the nonlinear block is constructed ...This paper deals with Wiener model based predictive control of a pH neutralization process.The dynamic linear block of the Wiener model is parameterized using Laguerre filters while the nonlinear block is constructed using least squares support vector machines (LSSVM).Input-output data from the first principle model of the pH neutralization process are used for the Wiener model identification.Simulation results show that the proposed Wiener model has higher prediction accuracy than Laguerre-support vector regression (SVR) Wiener models,Laguerre-polynomial Wiener models,and linear Laguerre models.The identified Wiener model is used here for nonlinear model predictive control (NMPC) of the pH neutralization process.The set-point tracking performance of the proposed NMPC is compared with those of the Laguerre-SVR Wiener model based NMPC,Laguerre-polynomial Wiener model based NMPC,and linear model predictive control (LMPC).Validation results show that the proposed NMPC outperforms the other three controllers.展开更多
High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life （RUL） prediction after the maintenance is directly determined by th...High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life （RUL） prediction after the maintenance is directly determined by the consistency of the degradation pattern before and after the maintenance. Aiming at this problem, an RUL prediction method based on the consistency test of a Wiener process is proposed. Firstly, the parameters of the Wiener process estimated by Maximum Likelihood Estimation （MLE） are proved to be biased, and a modified unbiased estimation method is proposed and verified by derivation and simulations. Then, the h statistic is constructed according to the reciprocal of the variation coefficient of the Wiener process, and the sampling distribution is derived. Meanwhile, a universal method for the consistency test is proposed based on the sampling distribution theorem, which is verified by simulation data and classical crack degradation data. Finally, based on the consistency test of the degradation model, a weighted fusion RUL prediction method is presented for the fuel pump of an airplane, and the validity of the presented method is verified by accurate computation results of real data, which provides a theoretical and practical guidance for engineers to predict the RUL of equipment after maintenance.展开更多
Surface charges greatly affect the discharge/flashover development process across an insulator. The relationship between surface charge distribution on insulating materials and measurement data based on Pockels techni...Surface charges greatly affect the discharge/flashover development process across an insulator. The relationship between surface charge distribution on insulating materials and measurement data based on Pockels technique is discussed, and an improved algorithm is built to calculate the real surface charge density from original data. In this algorithm, two-dimensional Fourier transform technique and Wiener filter are employed to reduce the amount of numerical calculation and improve the stability of computation, Moreover, this algorithm considers not only the influence of sample＇s thickness and permittivity, but also the impact of charges at different positions. The achievement of this calibration algorithm is demonstrated in details. Compared with traditional algorithms, the improved one supplies a better solution in the calibration of surface charge distribution on different samples with different thickness.展开更多
Radio Frequency Interference (RFI) degrades the quality of focused Ultra-WideBand Syn- thetic Aperture Radar (UWB SAR) images. From both the theoretical analysis and real data valida- tion, it is concluded that target...Radio Frequency Interference (RFI) degrades the quality of focused Ultra-WideBand Syn- thetic Aperture Radar (UWB SAR) images. From both the theoretical analysis and real data valida- tion, it is concluded that target echo and RFI have different Region Of Support (ROS) in 2-D fast- time wavenumber and aperture wavenumber domain. Consequently, a novel adaptive filter is pro- posed according to the Wiener optimum criterion on the distinct ROS characteristics of target echo and RFI. Compared with the notch filter and the Least Mean Square (LMS) adaptive filter in previ- ous literatures, the proposed method is more computationally efficient with satisfactory suppression results. In terms of Signal-to-Interference Ratio Improvement (SIRI) and processing time, the per- formance of the proposed adaptive filter is verified with the field data collected with a UWB SAR system.展开更多
基金supported by the National Natural Science Foundation of China(No.51305011)the National Basic Research Program of China(No.2014CB046402)the 111 Project of China
文摘An aviation hydraulic axial piston pump＇s degradation fiom comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char- acteristics must be factored into the estimation. The internal wear status of the axial piston pump is characterized by the return oil flow based on fault mechanism analysis of the main frictional pairs in the pump. The performance degradation model is described by the Wiener process to predict the remaining useful life （RUL） of the pump. Maximum likelihood estimation （MLE） is performed by utilizing the expectation maximization （EM） algorithm to estimate the initial parameters of the Wiener process while recursive estimation is conducted utilizing the Kalman filter method to estimate the drift coefficient of the Wiener process. The RUL of the pump is then calculated accord- ing to the performance degradation model based on the Wiener process. Experimental results indi- cate that the return oil flow is a suitable characteristic for reflecting the internal wear status of the axial piston pump, and thus the Wiener process-based method may effectively predicate the RUL of the pump.
基金Projects(51475462,61374138,61370031)supported by the National Natural Science Foundation of China
文摘Real time remaining useful life(RUL) prediction based on condition monitoring is an essential part in condition based maintenance(CBM). In the current methods about the real time RUL prediction of the nonlinear degradation process, the measurement error is not considered and forecasting uncertainty is large. Therefore, an approximate analytical RUL distribution in a closed-form of a nonlinear Wiener based degradation process with measurement errors was proposed. The maximum likelihood estimation approach was used to estimate the unknown fixed parameters in the proposed model. When the newly observed data are available, the random parameter is updated by the Bayesian method to make the estimation adapt to the item's individual characteristic and reduce the uncertainty of the estimation. The simulation results show that considering measurement errors in the degradation process can significantly improve the accuracy of real time RUL prediction.
基金Projects(51475462,61174030,61473094,61374126)supported by the National Natural Science Foundation of China
文摘Remaining useful life(RUL) estimation based on condition monitoring data is central to condition based maintenance(CBM). In the current methods about the Wiener process based RUL estimation, the randomness of the failure threshold has not been studied thoroughly. In this work, by using the truncated normal distribution to model random failure threshold(RFT), an analytical and closed-form RUL distribution based on the current observed data was derived considering the posterior distribution of the drift parameter. Then, the Bayesian method was used to update the prior estimation of failure threshold. To solve the uncertainty of the censored in situ data of failure threshold, the expectation maximization(EM) algorithm is used to calculate the posteriori estimation of failure threshold. Numerical examples show that considering the randomness of the failure threshold and updating the prior information of RFT could improve the accuracy of real time RUL estimation.
基金supported by National Natural Science Foundation of China (Grant No.10471010)
文摘For 1≤ p 【 ∞, firstly we prove that for an arbitrary set of distinct nodes in [-1, 1], it is impossible that the errors of the Hermite-Fejr interpolation approximation in L p -norm are weakly equivalent to the corresponding errors of the best polynomial approximation for all continuous functions on [-1, 1]. Secondly, on the ground of probability theory, we discuss the p-average errors of Hermite-Fejr interpolation sequence based on the extended Chebyshev nodes of the second kind on the Wiener space. By our results we know that for 1≤ p 【 ∞ and 2≤ q 【 ∞, the p-average errors of Hermite-Fejr interpolation approximation sequence based on the extended Chebyshev nodes of the second kind are weakly equivalent to the p-average errors of the corresponding best polynomial approximation sequence for L q -norm approximation. In comparison with these results, we discuss the p-average errors of Hermite-Fejr interpolation approximation sequence based on the Chebyshev nodes of the second kind and the p-average errors of the well-known Bernstein polynomial approximation sequence on the Wiener space.
文摘The future of control in cyberspace of parallel worlds is discussed. It argues for the coming age of Control 5.0,the control technology for the new IT capable of dealing with artificial worlds with VR, AR, AI and robotics. The discipline of automation needs a new interpretation of its core knowledge and skill set of modeling, analysis, and control for cyber-socialphysical systems, and a paradigm shift from Newtonian Systems with Newton's Laws or Big Laws with Small Data to Mertonian Systems with Merton's Laws or Small Laws with Big Data.
基金Project(60904002)supported by the National Natural Science Foundation of China
文摘An adaptive method of residual life estimation for deteriorated products with two performance characteristics (PCs) was proposed, which was sharply different from existing work that only utilized one-dimensional degradation data. Once new degradation information was available, the residual life of the product being monitored could be estimated in an adaptive manner. Here, it was assumed that the degradation of each PC over time was governed by a Wiener degradation process and the dependency between them was characterized by the Frank copula function. A bivariate Wiener process model with measurement errors was used to model the degradation measurements. A two-stage method and the Markov chain Monte Carlo (MCMC) method were combined to estimate the unknown parameters in sequence. Results from a numerical example about fatigue cracks show that the proposed method is valid as the relative error is small.
基金Supported by the China Postdoctoral Science Foundation (No. 2005038326)
文摘We study the random dynamical system （RDS） generated by the Benald flow problem with multiplicative noise and prove the existence of a compact random attractor for such RDS.
基金provided by the Heilongjiang Provincial Department of Education Planning Project (No.GBC1212076)the Central University Research Project (No.00-800015Q7)
文摘Based on low illumination and a large number of mixed noises contained in coal mine, denoising with one method usually cannot achieve good results, so a multi-level image denoising method based on wavelet correlation relevant inter-scale is presented. Firstly, we used directional median filter to effectively reduce impulse noise in the spatial domain, which is the main cause of noise in mine. Secondly, we used a Wiener filtration method to mainly reduce the Gaussian noise, and then finally used a multi-wavelet transform to minimize the remaining noise of low-light images in the transform domain. This multi-level image noise reduction method combines spatial and transform domain denoising to enhance benefits, and effectively reduce impulse noise and Gaussian noise in a coal mine, while retaining good detailed image characteristics of the underground for improving quality of images with mixing noise and effective low-light environment.
基金Project supported by the Science Fund of the Chinese Academy of Sciences.
文摘The author discusses a variational equation which has a solution of even function, i.e.a differential equation with some inequality constraints.This problem originated from adiscounted cost problem in singular stochastic control. Common analysis and stochastic anal-lysis are applied in this note.
文摘A low-complexity method for direction of arrival（DOA） estimation based on estimation signal parameters via rotational invariance technique（ESPRIT） is proposed.Instead of using the cross-correlation vectors in multistage Wiener filter（MSWF）,the orthogonal residual vectors obtained in conjugate gradient（CG） method span the signal subspace used by ESPRIT.The computational complexity of the proposed method is significantly reduced,since the signal subspace estimation mainly needs two matrixvector complex multiplications at the iteration of data level.Furthermore,the prior training data are not needed in the proposed method.To overcome performance degradation at low signal to noise ratio（SNR）,the expanded signal subspace spanned by more basis vectors is used and simultaneously renders ESPRIT yield redundant DOAs,which can be excluded by performing ESPRIT once more using the unexpanded signal subspace.Compared with the traditional ESPRIT methods by MSWF and eigenvalue decomposition（EVD）,numerical results demonstrate the satisfactory performance of the proposed method.
基金supported by the National Defense Foundation of China(7160118371901216)the China Postdoctoral Science Foundation(2017M623415)
文摘Nonlinearity and implicitness are common degradation features of the stochastic degradation equipment for prognostics.These features have an uncertain effect on the remaining useful life(RUL)prediction of the equipment.The current data-driven RUL prediction method has not systematically studied the nonlinear hidden degradation modeling and the RUL distribution function.This paper uses the nonlinear Wiener process to build a dual nonlinear implicit degradation model.Based on the historical measured data of similar equipment,the maximum likelihood estimation algorithm is used to estimate the fixed coefficients and the prior distribution of a random coefficient.Using the on-site measured data of the target equipment,the posterior distribution of a random coefficient and actual degradation state are step-by-step updated based on Bayesian inference and the extended Kalman filtering algorithm.The analytical form of the RUL distribution function is derived based on the first hitting time distribution.Combined with the two case studies,the proposed method is verified to have certain advantages over the existing methods in the accuracy of prediction.
基金supported by the China Postdoctoral Science Foundation(2017M623415)。
文摘The value range of the failure threshold will generate an uncertain influence on the prediction results for the remaining useful life(RUL) of equipment. Most of the existing studies on the RUL prediction assume that the failure threshold is a fixed value,as they have difficulty in reflecting the random variation of the failure threshold. In connection with the inadequacies of the existing research, an in-depth analysis is carried out to study the effect of the random failure threshold(RFT) on the prediction results for the RUL. First, a nonlinear degradation model with unit-to-unit variability and measurement error is established based on the nonlinear Wiener process. Second, the expectation-maximization(EM) algorithm is used to solve the estimated values of the parameters of the prior degradation model, and the Bayesian method is used to iteratively update the posterior distribution of the random coefficients. Then, the effects of three types of RFT constraint conditions on the prediction results for the RUL are analyzed, and the probability density function(PDF) of the RUL is derived. Finally,the degradation data of aero-turbofan engines are used to verify the correctness and advantages of the method.
基金Supported by National Natural Science Foundation of China(Grant No.10471010)
文摘For the weighted approximation in Lp-norm, we determine the asymptotic order for the p- average errors of Lagrange interpolation sequence based on the Chebyshev nodes on the Wiener space. We also determine its value in some special case.
基金Project (No.60574022) supported by the National Natural Science Foundation of China
文摘This paper deals with Wiener model based predictive control of a pH neutralization process.The dynamic linear block of the Wiener model is parameterized using Laguerre filters while the nonlinear block is constructed using least squares support vector machines (LSSVM).Input-output data from the first principle model of the pH neutralization process are used for the Wiener model identification.Simulation results show that the proposed Wiener model has higher prediction accuracy than Laguerre-support vector regression (SVR) Wiener models,Laguerre-polynomial Wiener models,and linear Laguerre models.The identified Wiener model is used here for nonlinear model predictive control (NMPC) of the pH neutralization process.The set-point tracking performance of the proposed NMPC is compared with those of the Laguerre-SVR Wiener model based NMPC,Laguerre-polynomial Wiener model based NMPC,and linear model predictive control (LMPC).Validation results show that the proposed NMPC outperforms the other three controllers.
基金supported by the Aeronautical Science Foundation of China(No.201428960221)
文摘High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life （RUL） prediction after the maintenance is directly determined by the consistency of the degradation pattern before and after the maintenance. Aiming at this problem, an RUL prediction method based on the consistency test of a Wiener process is proposed. Firstly, the parameters of the Wiener process estimated by Maximum Likelihood Estimation （MLE） are proved to be biased, and a modified unbiased estimation method is proposed and verified by derivation and simulations. Then, the h statistic is constructed according to the reciprocal of the variation coefficient of the Wiener process, and the sampling distribution is derived. Meanwhile, a universal method for the consistency test is proposed based on the sampling distribution theorem, which is verified by simulation data and classical crack degradation data. Finally, based on the consistency test of the degradation model, a weighted fusion RUL prediction method is presented for the fuel pump of an airplane, and the validity of the presented method is verified by accurate computation results of real data, which provides a theoretical and practical guidance for engineers to predict the RUL of equipment after maintenance.
基金supported in part by National Natural Science Foundation of China(Nos.50937004,50777051)
文摘Surface charges greatly affect the discharge/flashover development process across an insulator. The relationship between surface charge distribution on insulating materials and measurement data based on Pockels technique is discussed, and an improved algorithm is built to calculate the real surface charge density from original data. In this algorithm, two-dimensional Fourier transform technique and Wiener filter are employed to reduce the amount of numerical calculation and improve the stability of computation, Moreover, this algorithm considers not only the influence of sample＇s thickness and permittivity, but also the impact of charges at different positions. The achievement of this calibration algorithm is demonstrated in details. Compared with traditional algorithms, the improved one supplies a better solution in the calibration of surface charge distribution on different samples with different thickness.
文摘Radio Frequency Interference (RFI) degrades the quality of focused Ultra-WideBand Syn- thetic Aperture Radar (UWB SAR) images. From both the theoretical analysis and real data valida- tion, it is concluded that target echo and RFI have different Region Of Support (ROS) in 2-D fast- time wavenumber and aperture wavenumber domain. Consequently, a novel adaptive filter is pro- posed according to the Wiener optimum criterion on the distinct ROS characteristics of target echo and RFI. Compared with the notch filter and the Least Mean Square (LMS) adaptive filter in previ- ous literatures, the proposed method is more computationally efficient with satisfactory suppression results. In terms of Signal-to-Interference Ratio Improvement (SIRI) and processing time, the per- formance of the proposed adaptive filter is verified with the field data collected with a UWB SAR system.
