A series of alkali metal salts doped pluronic block copolymer F127 were used as electron injection/transport layers (ETLs) for polymer light-emitting diodes with poly[2-(4-(3′,7′-dimethyloctyloxy)-phenyl)-p-phenylen...A series of alkali metal salts doped pluronic block copolymer F127 were used as electron injection/transport layers (ETLs) for polymer light-emitting diodes with poly[2-(4-(3′,7′-dimethyloctyloxy)-phenyl)-p-phenylenevinylene] (P-PPV) as the emission layer. It was found that the electron transport capability of F127 can be effectively enhanced by doping with alkali metal salts. By using Li2CO3 (15%) doped F127 as ETL, the resulting device exhibited improved performance with a maximum luminous efficiency (LE) of 13.59 cd/A and a maximum brightness of 5529 cd/m2, while the device with undoped F127 as ETL only showed a maximum LE of 8.78 cd/A and a maximum brightness of 2952 cd/m2. The effects of the doping concentration, cations and anions of the alkali metal salts on the performance of the resulting devices were investigated. It was found that most of the alkali metal salt dopants can dramatically enhance the electron transport capability of F127 ETL and the performance of the resulting devices was greatly improved.展开更多
A novel crosslinkable water/alcohol soluble conjugated polymer PFN-C containing oxetane groups and aminoalkyl groups in the side chains has been developed and used as highly efficient electron injection and transporti...A novel crosslinkable water/alcohol soluble conjugated polymer PFN-C containing oxetane groups and aminoalkyl groups in the side chains has been developed and used as highly efficient electron injection and transporting material for polymer light-emitting diodes (PLEDs). The unique solubility in polar solvents and crosslinkable ability of PFN-C render it a good can- didate for solution processed multilayer PLEDs. It was found that PFN-C can greatly enhance the electron injection from high work-function metal cathode, due to its pendant amino groups. As a result, PLEDs with PFN-C/Al cathode exhibited compara- ble device performance to the devices with Ba/Al cathode. The resulting green light-emitting device showed promising perfor- mance with a maximum luminance efficiency of 13.53 cd A-1.展开更多
Catechinone hair dyestuff was produced chemically from (+)-catechin by the oxidation with O2 in basic water/alcohol mixed solution. The effects of reaction conditions such as basicity, sorts of added base, temperature...Catechinone hair dyestuff was produced chemically from (+)-catechin by the oxidation with O2 in basic water/alcohol mixed solution. The effects of reaction conditions such as basicity, sorts of added base, temperature, alcohol molar fraction of solvent and sorts of added alcohols on the catechinone formation were studied in order to increase the efficiency of the dyestuff production. The amount of obtained catechinone increases with increasing basicity of the reaction solution. The dyestuff is obtained by adding monoethanol amine, diethanol amine, triethanol amine, l-arginine, Na2CO3, K2CO3, Na3PO4 or NaOH into the solution as a base and the most preferable base is monoethanol amine. The optimum temperature for the production in water/ethanol solution is 30°C. It was found that water-soluble alcohols such as methanol, ethanol, 2-propanol, 1-propanol and tert-butyl alcohol are available for preparing the dyestuff. The optimum alcohol molar fraction of the mixed solvent used for the dye formation is 0.45 for methanol, 0.25 for ethanol and 0.20 for 2-propanol, 0.15 for 1-propanol and 0.10 for tert-butyl alcohol. The amount of the obtained dyestuff reaches a maximum at 1) 0.35 and 0.59, 2) 0.35 or 3) 0.35 mol·kg¨1 of the concentration of (+)-catechin for the 1) water/methanol, 2) water/ethanol or 3) water/1-propanol system, respectively.展开更多
Monoammonium phosphate （MAP） is produced from crude phosphoric acid which contains Fe （III）, AI （III） and Mg （II） ions. In general, the fertilizers MAP was obtained by including various heavy metal micronutrie...Monoammonium phosphate （MAP） is produced from crude phosphoric acid which contains Fe （III）, AI （III） and Mg （II） ions. In general, the fertilizers MAP was obtained by including various heavy metal micronutrients （Co, Cu, Fe, Mn, Mo, Ni and Zn）, fluorine and heavy metals considered toxic （Al and Cd） in. The long-continued application of phosphate fertilizers （MAP） and their by products can redistribute and elevate heavy metal and fluorine concentrations in soil profiles. However, they are subsequently transferred into the human food chain because of their availability to plants, mainly in acid soils. Thus, it is important to eliminate the impurities in MAP. Purified MAP is three times more expensive than the same product before purification and is commonly used in a number of applications such as flame proofing （building materials, pulp and paper） and agriculture. Purified MAP is a key ingredient in specialty all-soluble dry fertilizers, waste water-nutrient for biological purification, fermentation and biotechnology-nutrient. The procedure for purification of industrial MAP is a recrystallization, by using several mixtures of solvents. The physicochemical characterization of this fertilizer upstream and downstream from the purification, through spectroscopic analyses and chemical analyses, shows that recrystallization can eliminate impurities. The physicochemical properties of the purified MAP obtained by recrystallization are comparable to those of the MAP obtained with a pure phosphoric acid.展开更多
设计合成了Por-N,Por-NBr,Por-Cu-N和Por-Cu-NBr四种水醇溶性小分子卟啉衍生物.对这类卟啉小分子衍生物的紫外可见吸收光谱研究表明,基于金属铜配位的卟啉小分子衍生物较未配位化合物有微弱的蓝移.循环伏安法对这类小分子卟啉衍生物的...设计合成了Por-N,Por-NBr,Por-Cu-N和Por-Cu-NBr四种水醇溶性小分子卟啉衍生物.对这类卟啉小分子衍生物的紫外可见吸收光谱研究表明,基于金属铜配位的卟啉小分子衍生物较未配位化合物有微弱的蓝移.循环伏安法对这类小分子卟啉衍生物的研究表明,基于金属铜配合物的卟啉衍生物的最高占有分子轨道能级均没有明显变化.采用空间电荷限制电流方法对小分子卟啉衍生物的研究表明,基于金属铜配位的卟啉小分子衍生物的电子迁移率得到明显提高.以聚合物PCE10为给体材料,富勒烯衍生物PC71BM为受体材料,以及合成的小分子卟啉衍生物为阴极界面层制备了结构为ITO/PEDOT:PSS/PCE10:PC71BM/卟啉小分子衍生物/Al的聚合物太阳电池器件.器件研究结果表明,化合物Por-NBr,Por-Cu-N与Por-Cu-NBr作为电子传输层的器件的光电转换效率达到9%以上,其中以Por-Cu-N作为阴极界面层的器件达到的最高效率为9.12%,相应器件的短路电流密度,开路电压以及填充因子分别为16.91 m A·cm-2,0.79 V和68.1%.表明这类水醇溶性小分子卟啉衍生物作为聚合物太阳电池的阴极界面层有着广阔的应用前景.展开更多
基金supported by the National Natural Science Foundation of China (21125419, 50990065, 51010003, 51073058, and 20904011)National Research Project (2009CB623601 and 2009CB930604)
文摘A series of alkali metal salts doped pluronic block copolymer F127 were used as electron injection/transport layers (ETLs) for polymer light-emitting diodes with poly[2-(4-(3′,7′-dimethyloctyloxy)-phenyl)-p-phenylenevinylene] (P-PPV) as the emission layer. It was found that the electron transport capability of F127 can be effectively enhanced by doping with alkali metal salts. By using Li2CO3 (15%) doped F127 as ETL, the resulting device exhibited improved performance with a maximum luminous efficiency (LE) of 13.59 cd/A and a maximum brightness of 5529 cd/m2, while the device with undoped F127 as ETL only showed a maximum LE of 8.78 cd/A and a maximum brightness of 2952 cd/m2. The effects of the doping concentration, cations and anions of the alkali metal salts on the performance of the resulting devices were investigated. It was found that most of the alkali metal salt dopants can dramatically enhance the electron transport capability of F127 ETL and the performance of the resulting devices was greatly improved.
基金financially supported by the Natural Science Foundation of China (50990065, 51010003, 51073058 & 20904011)the National Basic Research Program of China (973 Program, 2009CB623601)the Fun-damental Research Funds for the Central Universities, South China Uni-versity of Technology
文摘A novel crosslinkable water/alcohol soluble conjugated polymer PFN-C containing oxetane groups and aminoalkyl groups in the side chains has been developed and used as highly efficient electron injection and transporting material for polymer light-emitting diodes (PLEDs). The unique solubility in polar solvents and crosslinkable ability of PFN-C render it a good can- didate for solution processed multilayer PLEDs. It was found that PFN-C can greatly enhance the electron injection from high work-function metal cathode, due to its pendant amino groups. As a result, PLEDs with PFN-C/Al cathode exhibited compara- ble device performance to the devices with Ba/Al cathode. The resulting green light-emitting device showed promising perfor- mance with a maximum luminance efficiency of 13.53 cd A-1.
文摘Catechinone hair dyestuff was produced chemically from (+)-catechin by the oxidation with O2 in basic water/alcohol mixed solution. The effects of reaction conditions such as basicity, sorts of added base, temperature, alcohol molar fraction of solvent and sorts of added alcohols on the catechinone formation were studied in order to increase the efficiency of the dyestuff production. The amount of obtained catechinone increases with increasing basicity of the reaction solution. The dyestuff is obtained by adding monoethanol amine, diethanol amine, triethanol amine, l-arginine, Na2CO3, K2CO3, Na3PO4 or NaOH into the solution as a base and the most preferable base is monoethanol amine. The optimum temperature for the production in water/ethanol solution is 30°C. It was found that water-soluble alcohols such as methanol, ethanol, 2-propanol, 1-propanol and tert-butyl alcohol are available for preparing the dyestuff. The optimum alcohol molar fraction of the mixed solvent used for the dye formation is 0.45 for methanol, 0.25 for ethanol and 0.20 for 2-propanol, 0.15 for 1-propanol and 0.10 for tert-butyl alcohol. The amount of the obtained dyestuff reaches a maximum at 1) 0.35 and 0.59, 2) 0.35 or 3) 0.35 mol·kg¨1 of the concentration of (+)-catechin for the 1) water/methanol, 2) water/ethanol or 3) water/1-propanol system, respectively.
文摘Monoammonium phosphate （MAP） is produced from crude phosphoric acid which contains Fe （III）, AI （III） and Mg （II） ions. In general, the fertilizers MAP was obtained by including various heavy metal micronutrients （Co, Cu, Fe, Mn, Mo, Ni and Zn）, fluorine and heavy metals considered toxic （Al and Cd） in. The long-continued application of phosphate fertilizers （MAP） and their by products can redistribute and elevate heavy metal and fluorine concentrations in soil profiles. However, they are subsequently transferred into the human food chain because of their availability to plants, mainly in acid soils. Thus, it is important to eliminate the impurities in MAP. Purified MAP is three times more expensive than the same product before purification and is commonly used in a number of applications such as flame proofing （building materials, pulp and paper） and agriculture. Purified MAP is a key ingredient in specialty all-soluble dry fertilizers, waste water-nutrient for biological purification, fermentation and biotechnology-nutrient. The procedure for purification of industrial MAP is a recrystallization, by using several mixtures of solvents. The physicochemical characterization of this fertilizer upstream and downstream from the purification, through spectroscopic analyses and chemical analyses, shows that recrystallization can eliminate impurities. The physicochemical properties of the purified MAP obtained by recrystallization are comparable to those of the MAP obtained with a pure phosphoric acid.
文摘设计合成了Por-N,Por-NBr,Por-Cu-N和Por-Cu-NBr四种水醇溶性小分子卟啉衍生物.对这类卟啉小分子衍生物的紫外可见吸收光谱研究表明,基于金属铜配位的卟啉小分子衍生物较未配位化合物有微弱的蓝移.循环伏安法对这类小分子卟啉衍生物的研究表明,基于金属铜配合物的卟啉衍生物的最高占有分子轨道能级均没有明显变化.采用空间电荷限制电流方法对小分子卟啉衍生物的研究表明,基于金属铜配位的卟啉小分子衍生物的电子迁移率得到明显提高.以聚合物PCE10为给体材料,富勒烯衍生物PC71BM为受体材料,以及合成的小分子卟啉衍生物为阴极界面层制备了结构为ITO/PEDOT:PSS/PCE10:PC71BM/卟啉小分子衍生物/Al的聚合物太阳电池器件.器件研究结果表明,化合物Por-NBr,Por-Cu-N与Por-Cu-NBr作为电子传输层的器件的光电转换效率达到9%以上,其中以Por-Cu-N作为阴极界面层的器件达到的最高效率为9.12%,相应器件的短路电流密度,开路电压以及填充因子分别为16.91 m A·cm-2,0.79 V和68.1%.表明这类水醇溶性小分子卟啉衍生物作为聚合物太阳电池的阴极界面层有着广阔的应用前景.
