A series of Mn-Mo-W-O_x/TiO_2-SiO_2 catalysts was modified with CeO_2 using an extrusion molding method. The catalytic activities of the obtained catalysts were tested for the synergistic catalytic removals of CO, NO ...A series of Mn-Mo-W-O_x/TiO_2-SiO_2 catalysts was modified with CeO_2 using an extrusion molding method. The catalytic activities of the obtained catalysts were tested for the synergistic catalytic removals of CO, NO and C_3H_8. The ratio of catalyst composition on catalytic activities for NH_3-SCR was optimized, which reveals that the molar ratio of Ti/Si was 9：1 and the catalyst containing 1.5 wt% CeO_2 and 12 wt% Mn-Mo-W-O_x exhibits the best catalytic performances. These samples were characterized by XRD, N_2-BET, Py-IR, NH_3-TPD, SEM/element mapping, H_2-TPR and XPS, respectively. Results show that the optimal catalyst exhibits more than 99% NO conversion, 86% CO conversion and 100% C_3H_8 conversion under GHSV of 5000 h^（-1）. In addition, the GHSV has little influence on removal of NO when it is less than 15,000 h^（-1）. Furthermore, the addition of CeO_2 will enhance the surface acidity, increase Mn^（4＋）concentration and inhibit the grain growth, which are favorable for the excellent catalytic performance.Anyway,the 1.5 wt% CeO_2-12 wt% Mn-Mo-W-O_x/TiO_2-SiO_2 possesses outstanding redox properties,abundant acid sites and high Mn^（4＋） concentration, which provide a guarantee for synergistic catalytic removal of CO, NO and HC.展开更多
Composite electrode Ni-W-TiO2 was prepared by electrodeposition.Electrocatalytic behaviors of hydrogen evolution reaction on the obtained electrode was studied by steady-state polarization and AC impedance techniques ...Composite electrode Ni-W-TiO2 was prepared by electrodeposition.Electrocatalytic behaviors of hydrogen evolution reaction on the obtained electrode was studied by steady-state polarization and AC impedance techniques in 7mol/L KOH solution.The apparent activation energy of hydrogen evolution reaction and stability of the elctrode were also reported.Experiment results showed that the introduction of TiO2 to the Ni-W layer lead to an improvement of Electrocatalytic and stability of the layer.The improvemment was due to the increase of the surface area and the decrease of the apparent activation energy.展开更多
为研究Ti合金中常用的基体强化元素W对合金抗氧化性的作用,利用第一性原理方法计算了W掺杂对Ti合金氧化产物金红石TiO_2中氧空位形成能的影响。计算发现,W可以显著增大其近邻位置的氧空位的形成能,使其增大将近0.7 e V,这将有效抑制氧...为研究Ti合金中常用的基体强化元素W对合金抗氧化性的作用,利用第一性原理方法计算了W掺杂对Ti合金氧化产物金红石TiO_2中氧空位形成能的影响。计算发现,W可以显著增大其近邻位置的氧空位的形成能,使其增大将近0.7 e V,这将有效抑制氧空位的产生以及环境中氧的渗透,对Ti合金的抗氧化性是有益的。同时研究了2个氧空位组成的不同构型的空位对,发现W同样可以增大氧空位对的形成能,但增加的数值平均到每个氧空位只有0.2 e V,即随着氧化的加剧和氧空位浓度的增加,W对抗氧化性能提高的效果减弱。电子态密度分析表明,对于不同构型的氧空位对,体系内的未配对电子分布在不同的能级水平,这导致了不同的空位形成能。展开更多
A new type of internally illuminated honeycomb photoreactor was designed. The honeycomb catalyst prepared by using Cedoped TiO2 with 1%–2% vanadium and tungsten was employed for mercury removal from simulated industr...A new type of internally illuminated honeycomb photoreactor was designed. The honeycomb catalyst prepared by using Cedoped TiO2 with 1%–2% vanadium and tungsten was employed for mercury removal from simulated industrial flue gas. The adsorption kinetics in the reaction process were studied. The results showed that the internally illuminated honeycomb photoreactor had good mercury removal performance. When the temperature was 25℃ and the ultraviolet(UV) light intensity reached 80 μW/cm2, the mercury removal efficiency reached 92.5%. The mercury removal efficiency increased significantly with the doping ratio of Ce. XPS analysis showed that the oxidation state of Ce changed from 4 to 3 in the mercury removal reaction and produced lattice oxygen, which acts as an oxidant. O2 can promote mercury removal by honeycomb catalysts;SO2 and HCl also had positive effects, while NO had an inhibitory effect on mercury removal. Kinetic research in the reaction process showed that the quasi-first-order dynamic model had good fitting results, and the correlation coefficients of the fitting results for multiple sets of experimental data were more than 0.999.展开更多
基金Project supported by the National Key Research and Development Program of China(2016YFC0205500)National Natural Science Foundation of China(51772149)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘A series of Mn-Mo-W-O_x/TiO_2-SiO_2 catalysts was modified with CeO_2 using an extrusion molding method. The catalytic activities of the obtained catalysts were tested for the synergistic catalytic removals of CO, NO and C_3H_8. The ratio of catalyst composition on catalytic activities for NH_3-SCR was optimized, which reveals that the molar ratio of Ti/Si was 9：1 and the catalyst containing 1.5 wt% CeO_2 and 12 wt% Mn-Mo-W-O_x exhibits the best catalytic performances. These samples were characterized by XRD, N_2-BET, Py-IR, NH_3-TPD, SEM/element mapping, H_2-TPR and XPS, respectively. Results show that the optimal catalyst exhibits more than 99% NO conversion, 86% CO conversion and 100% C_3H_8 conversion under GHSV of 5000 h^（-1）. In addition, the GHSV has little influence on removal of NO when it is less than 15,000 h^（-1）. Furthermore, the addition of CeO_2 will enhance the surface acidity, increase Mn^（4＋）concentration and inhibit the grain growth, which are favorable for the excellent catalytic performance.Anyway,the 1.5 wt% CeO_2-12 wt% Mn-Mo-W-O_x/TiO_2-SiO_2 possesses outstanding redox properties,abundant acid sites and high Mn^（4＋） concentration, which provide a guarantee for synergistic catalytic removal of CO, NO and HC.
文摘Composite electrode Ni-W-TiO2 was prepared by electrodeposition.Electrocatalytic behaviors of hydrogen evolution reaction on the obtained electrode was studied by steady-state polarization and AC impedance techniques in 7mol/L KOH solution.The apparent activation energy of hydrogen evolution reaction and stability of the elctrode were also reported.Experiment results showed that the introduction of TiO2 to the Ni-W layer lead to an improvement of Electrocatalytic and stability of the layer.The improvemment was due to the increase of the surface area and the decrease of the apparent activation energy.
文摘为研究Ti合金中常用的基体强化元素W对合金抗氧化性的作用,利用第一性原理方法计算了W掺杂对Ti合金氧化产物金红石TiO_2中氧空位形成能的影响。计算发现,W可以显著增大其近邻位置的氧空位的形成能,使其增大将近0.7 e V,这将有效抑制氧空位的产生以及环境中氧的渗透,对Ti合金的抗氧化性是有益的。同时研究了2个氧空位组成的不同构型的空位对,发现W同样可以增大氧空位对的形成能,但增加的数值平均到每个氧空位只有0.2 e V,即随着氧化的加剧和氧空位浓度的增加,W对抗氧化性能提高的效果减弱。电子态密度分析表明,对于不同构型的氧空位对,体系内的未配对电子分布在不同的能级水平,这导致了不同的空位形成能。
基金supported by the National Key Technologies R&D Program(Grant No.2019YFC1907000)the National Natural Science Foundation of China(Grant No.42030807)+1 种基金the Key Research and Development Program of Hubei Province(Grant No.2020BCA076)the Program for HUST Academic Frontier Youth Team(Grant No.2018QYTD05)。
文摘A new type of internally illuminated honeycomb photoreactor was designed. The honeycomb catalyst prepared by using Cedoped TiO2 with 1%–2% vanadium and tungsten was employed for mercury removal from simulated industrial flue gas. The adsorption kinetics in the reaction process were studied. The results showed that the internally illuminated honeycomb photoreactor had good mercury removal performance. When the temperature was 25℃ and the ultraviolet(UV) light intensity reached 80 μW/cm2, the mercury removal efficiency reached 92.5%. The mercury removal efficiency increased significantly with the doping ratio of Ce. XPS analysis showed that the oxidation state of Ce changed from 4 to 3 in the mercury removal reaction and produced lattice oxygen, which acts as an oxidant. O2 can promote mercury removal by honeycomb catalysts;SO2 and HCl also had positive effects, while NO had an inhibitory effect on mercury removal. Kinetic research in the reaction process showed that the quasi-first-order dynamic model had good fitting results, and the correlation coefficients of the fitting results for multiple sets of experimental data were more than 0.999.
