A digitally controlled oscillator（DCO） using a three-transistor XOR gate as the variable load has been presented.A delay cell using an inverter and a three-transistor XOR gate as the variable capacitance is also pro...A digitally controlled oscillator（DCO） using a three-transistor XOR gate as the variable load has been presented.A delay cell using an inverter and a three-transistor XOR gate as the variable capacitance is also proposed. Three-,five- and seven-stage DCO circuits have been designed using the proposed delay cell.The output frequency is controlled digitally with bits applied to the delay cells.The three-bit DCO shows output frequency and power consumption variation in the range of 3.2486-4.0267 GHz and 0.6121-0.3901 mW,respectively,with a change in the control word 111-000.The five-bit DCO achieves frequency and power of 1.8553-2.3506 GHz and 1.0202-0.6501 mW,respectively,with a change in the control word 11111-00000.Moreover,the seven-bit DCO shows a frequency and power consumption variation of 1.3239-1.6817 GHz and 1.4282-0.9102 mW,respectively, with a varying control word 1111111-0000000.The power consumption and output frequency of the proposed circuits have been compared with earlier reported circuits and the present approaches show significant improvements.展开更多
A low power and low phase noise phase-locked loop（PLL） design for low voltage（0.8 V） applications is presented.The voltage controlled oscillator（VCO） operates from a 0.5 V voltage supply,while the other blocks o...A low power and low phase noise phase-locked loop（PLL） design for low voltage（0.8 V） applications is presented.The voltage controlled oscillator（VCO） operates from a 0.5 V voltage supply,while the other blocks operate from a 0.8 V supply.A differential NMOS-only topology is adopted for the oscillator,a modified precharge topology is applied in the phase-frequency detector（PFD）,and a new feedback structure is utilized in the charge pump（CP） for ultra-low voltage applications.The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power.In addition,several novel design techniques,such as removing the tail current source,are demonstrated to cut down the phase noise.Implemented in the SMIC 0.13μm RF CMOS process and operated at 0.8 V supply voltage,the PLL measures a phase noise of-112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz.The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply.The occupied chip area of the PFD and CP is 100×100μm^2.The chip occupies 0.63 mm^2,and draws less than 6.54 mW from a 0.8 V supply.展开更多
Digital controlled oscillators（DCOs） are the core of all digital phase locked loop（ADPLL） circuits. Here,DCO structures with reduced hardware and power consumption having full digital control have been proposed. T...Digital controlled oscillators（DCOs） are the core of all digital phase locked loop（ADPLL） circuits. Here,DCO structures with reduced hardware and power consumption having full digital control have been proposed. Three different DCO architectures have been proposed based on ring based topology.Three,four and five bit controlled DCO with NMOS,PMOS and NMOS PMOS transistor switching networks are presented.A three-transistor XNOR gate has been used as the inverter which is used as the delay cell.Delay has been controlled digitally with a switch network of NMOS and PMOS transistors.The three bit DCO with one NMOS network shows frequency variations of 1.6141-1.8790 GHz with power consumption variations 251.9224-276.8591μW. The four bit DCO with one NMOS network shows frequency variation of 1.6229-1.8868 GHz with varying power consumption of 251.9225-278.0740μW.A six bit DCO with one NMOS switching network gave an output frequency of 1.7237-1.8962 GHz with power consumption of 251.928-278.998μW.Output frequency and power consumption results for 4 6 bit DCO circuits with one PMOS and NMOS PMOS switching network have also been presented.The phase noise parameter with an offset frequency of 1 MHz has also been reported for the proposed circuits.Comparisons with earlier reported circuits have been made and the present approach shows advantages over previous circuits.展开更多
A 2.7-4.0 GHz dual-mode auto frequency calibration(AFC) fast locking PLL was designed for navigation system on chip(SoC). The SoC was composed of one radio frequency(RF) receiver, one baseband and several system contr...A 2.7-4.0 GHz dual-mode auto frequency calibration(AFC) fast locking PLL was designed for navigation system on chip(SoC). The SoC was composed of one radio frequency(RF) receiver, one baseband and several system control parts. In the proposed AFC block, both analog and digital modes were designed to complete the AFC process. In analog mode, the analog part sampled and detected the charge pump output tuning voltage, which would give the indicator to digital part to adjust the voltage control oscillator(VCO) capacitor bank. In digital mode, the digital part counted the phase lock loop(PLL) divided clock to judge whether VCO frequency was fast or slow. The analog and digital modes completed the auto frequency calibration function independently by internal switch. By designing a special switching algorithm, the switch of the digital and analog mode could be realized anytime during the lock and unlock detecting process for faster and more stable locking. This chip is fabricated in 0.13 μm RF complementary metal oxide semiconductor(CMOS) process, and the VCO supports the frequency range from 2.7 to 4.0 GHz. Tested 3.96 GHz frequency phase noise is -90 d Bc/Hz@100 k Hz frequency offset and -120 d Bc/Hz@1 MHz frequency offset. By using the analog mode in lock detection and digital mode in unlock detection, tested AFC time is less than 9 μs and the total PLL lock time is less than 19 μs. The SoC acquisition and tracking sensitivity are about-142 d Bm and-155 d Bm, respectively. The area of the proposed PLL is 0.35 mm^2 and the total SoC area is about 9.6 mm^2.展开更多
文摘A digitally controlled oscillator（DCO） using a three-transistor XOR gate as the variable load has been presented.A delay cell using an inverter and a three-transistor XOR gate as the variable capacitance is also proposed. Three-,five- and seven-stage DCO circuits have been designed using the proposed delay cell.The output frequency is controlled digitally with bits applied to the delay cells.The three-bit DCO shows output frequency and power consumption variation in the range of 3.2486-4.0267 GHz and 0.6121-0.3901 mW,respectively,with a change in the control word 111-000.The five-bit DCO achieves frequency and power of 1.8553-2.3506 GHz and 1.0202-0.6501 mW,respectively,with a change in the control word 11111-00000.Moreover,the seven-bit DCO shows a frequency and power consumption variation of 1.3239-1.6817 GHz and 1.4282-0.9102 mW,respectively, with a varying control word 1111111-0000000.The power consumption and output frequency of the proposed circuits have been compared with earlier reported circuits and the present approaches show significant improvements.
文摘A low power and low phase noise phase-locked loop（PLL） design for low voltage（0.8 V） applications is presented.The voltage controlled oscillator（VCO） operates from a 0.5 V voltage supply,while the other blocks operate from a 0.8 V supply.A differential NMOS-only topology is adopted for the oscillator,a modified precharge topology is applied in the phase-frequency detector（PFD）,and a new feedback structure is utilized in the charge pump（CP） for ultra-low voltage applications.The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power.In addition,several novel design techniques,such as removing the tail current source,are demonstrated to cut down the phase noise.Implemented in the SMIC 0.13μm RF CMOS process and operated at 0.8 V supply voltage,the PLL measures a phase noise of-112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz.The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply.The occupied chip area of the PFD and CP is 100×100μm^2.The chip occupies 0.63 mm^2,and draws less than 6.54 mW from a 0.8 V supply.
文摘Digital controlled oscillators（DCOs） are the core of all digital phase locked loop（ADPLL） circuits. Here,DCO structures with reduced hardware and power consumption having full digital control have been proposed. Three different DCO architectures have been proposed based on ring based topology.Three,four and five bit controlled DCO with NMOS,PMOS and NMOS PMOS transistor switching networks are presented.A three-transistor XNOR gate has been used as the inverter which is used as the delay cell.Delay has been controlled digitally with a switch network of NMOS and PMOS transistors.The three bit DCO with one NMOS network shows frequency variations of 1.6141-1.8790 GHz with power consumption variations 251.9224-276.8591μW. The four bit DCO with one NMOS network shows frequency variation of 1.6229-1.8868 GHz with varying power consumption of 251.9225-278.0740μW.A six bit DCO with one NMOS switching network gave an output frequency of 1.7237-1.8962 GHz with power consumption of 251.928-278.998μW.Output frequency and power consumption results for 4 6 bit DCO circuits with one PMOS and NMOS PMOS switching network have also been presented.The phase noise parameter with an offset frequency of 1 MHz has also been reported for the proposed circuits.Comparisons with earlier reported circuits have been made and the present approach shows advantages over previous circuits.
基金Project(2011912004)supported by the Major Program of the Economic & Information Commission Program of Guangdong Province,ChinaProjects(2011B010700065,2011A090200106)supported by the Major Program of the Department of Science and Technology of Guangdong Province,China
文摘A 2.7-4.0 GHz dual-mode auto frequency calibration(AFC) fast locking PLL was designed for navigation system on chip(SoC). The SoC was composed of one radio frequency(RF) receiver, one baseband and several system control parts. In the proposed AFC block, both analog and digital modes were designed to complete the AFC process. In analog mode, the analog part sampled and detected the charge pump output tuning voltage, which would give the indicator to digital part to adjust the voltage control oscillator(VCO) capacitor bank. In digital mode, the digital part counted the phase lock loop(PLL) divided clock to judge whether VCO frequency was fast or slow. The analog and digital modes completed the auto frequency calibration function independently by internal switch. By designing a special switching algorithm, the switch of the digital and analog mode could be realized anytime during the lock and unlock detecting process for faster and more stable locking. This chip is fabricated in 0.13 μm RF complementary metal oxide semiconductor(CMOS) process, and the VCO supports the frequency range from 2.7 to 4.0 GHz. Tested 3.96 GHz frequency phase noise is -90 d Bc/Hz@100 k Hz frequency offset and -120 d Bc/Hz@1 MHz frequency offset. By using the analog mode in lock detection and digital mode in unlock detection, tested AFC time is less than 9 μs and the total PLL lock time is less than 19 μs. The SoC acquisition and tracking sensitivity are about-142 d Bm and-155 d Bm, respectively. The area of the proposed PLL is 0.35 mm^2 and the total SoC area is about 9.6 mm^2.
