Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using ...Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using Sextant system in the retrospective non-randomized case-control study. Methods： Atotal of 38 consecutive non-randomized patients with type A thoracolumbar fractures, which had been stabilized posteriorly from December 2006 to March 2009, were examined retrospectively more than 9 months after surgery. Twenty-one patients had been treated conventionally with open pedicle screw fixation （OPSF） and 17 patients received minimally invasive treatment with Sextant percutaneous pedicle screw fixation （SPPSF）. As a method of evaluation, the incision size, the intraoperation and post- operative volume of blood loss, operation time, postoperative hospital stay, blood transfusion, the radiological assessment of the sagittal Cobb＇s angle, vertebral body angle and vertebral body height were recorded and compared. Results： All patients were followed up for 8-24 months （average 11.6 months）. There were significant differences in the incision size, surgical blood loss, surgical draining Joss, operation time, hospital stay after operation, blood transfusion, the proportion of antalgic supplement and postoperative incisional VAS between the two groups （P〈0.05）. Mean preoperative kyphotic deformity was 16.0° and improved by 9.3° after surgery in OPSF group, but 15.2° and 10.3° respectively in SPPSF group. Mean preoperative angle of the fractured vertebral body was 15.9°and improved by 7.9° after surgery in OPSF group, but 14.9° and 6.6° respectively in SPPSF group. Mean anterior vertebral body height （% of normal） was 67.3% before surgery and 95.8% after surgery, but 69.1% and 90.1% respectively in SPPSF group. Mean posterior vertebral body height （% of normal） was 93.3% before surgery and 99.5% after surgery, but 88.9% and 93.3% respectively in SPPSF group. Among the patien展开更多
AIM:To evaluate the effects of percutaneous ozone injection via the posterior-lateral route and inner margin of the facet joint in the treatment of large lumbar disc herniation.METHODS:Fifty-eight patients with large ...AIM:To evaluate the effects of percutaneous ozone injection via the posterior-lateral route and inner margin of the facet joint in the treatment of large lumbar disc herniation.METHODS:Fifty-eight patients with large lumbar disc herniation were treated with percutaneous injection of ozone via the posterior-lateral route and inner margin of the facet joint under digital subtraction angiography.Second injections were performed 5 d after the initial injection.All patients were followed up for 6-18 mo.A modified Macnab method was used for assessing clinical outcomes after oxygen-ozone therapy.RESULTS:Successful puncture was obtained in all patients.The overall efficacy was 91.4;the outcome was the excellent in 37 cases(63.8),good in 16 cases(27.6) and fair/poor in 5 cases(8.6) according to the Macnab criteria.No severe complications were found throughout this study.CONCLUSION:Percutaneous intradiscal ozone injection via the posterior-lateral route and inner margin of the facet joint is effective and safe for treatment of large lumbar disc herniation.展开更多
Objective： To explore the advantages and indications of the paraspinal approach by anatomical study and clinical application.Methods： The anatomical data and clinical practice of 27 cases were analyzed to explore th...Objective： To explore the advantages and indications of the paraspinal approach by anatomical study and clinical application.Methods： The anatomical data and clinical practice of 27 cases were analyzed to explore the accurate approach between the paraspinal muscles and the structure of ambient tissues, as well as the results of clinical application of paraspinal approach. The operation time, blood loss, incision length, radiographic result （Cobb angle, height of anterior edge of the vertebrae） were compared with those in 24cases treated by traditional approach.Results： Complete exposure of the facets could be easily performed by identifying natural cleavage plane between the multifidus and Iongissimus muscles. The natural muscular cleavage was （1.47±0.23） cm lateral to the midline for females, and （1.64±0.35） cm for males at T12 level. The distance was （3.3±0.6） cm lateral to the midline for females,and （3.7±1.0） cm for males at L4 level. In paraspinal approach group, the operation time was （76.2±15.7） min, blood loss was （91.6±16.9） ml and incision length was （7.6±0.8） cm. In traditional approach group, the operation time was （121.4±19.6） min, blood loss was （218.7±32.3 ） ml and incision length was （17.4±2.1） cm. To compare paraspinal approach with traditional approach, the operation time, blood loss and incision length had statistical difference （P〈0.05） and the radiographic result （Cobb angle, height of anterior edge of the vertebrae） had no statistical difference （P〉0.05）.Conclusions： When the paraspinal approach is performed through natural cleavage plane between the multifidus and longissimus muscles, there are no wide muscular disinsertions, leaving the supraspinous and interspinous ligaments intact. The distance of natural cleavage to the midline is different at T12 and L4 planes. By this approach,the facet joints can be explored easily and completely, and a clear surgical field will be available for the placement of pedicle scr展开更多
Objective： The main treatment method used for thoracolumbar fractures is open reduction and in- ternal fixation. Commonly there are three surgical approaches： anterior, posterior and paraspinal. We attempt to compar...Objective： The main treatment method used for thoracolumbar fractures is open reduction and in- ternal fixation. Commonly there are three surgical approaches： anterior, posterior and paraspinal. We attempt to compare the three approaches based on our clinical data analysis. Methods： A group of 94 patients with Denis type A or B thoracolumbar burst fracture between March 2008 and September 2010 were recruited in this study. These patients were treated by anterior-, posterioror paraspinal-approach reduction with or without decompression. The fracture was fixed with titanium mesh and Z-plate via anterior approach （24 patients）, screw and rod system via posterior approach （38 patients） or paraspinal approach （32 patients）. Clinical evaluations included operation duration, blood loss, inci- sion length, preoperative and postoperative Oswestry disability index （ODI）. Results： The average operation duration （94.1 min±13.7 rain）, blood loss （86.7 ml-20.0 ml）, length of incision （9.3 mm± 0.7 mm） and postoperative ODI （6±0.5） were significantly lower （P〈0.05） in paraspinal approach group than in traditional posterior approach group （operation duration 94.1 min±13.7 min, blood loss 143.3 ml±28.3 ml, length of incision 15.4 cm±2.1 cm and ODI 12±0.7） and anterior approach group （operation duration 176.3 min±20.7 min, blood loss 255.1 ml±38.4 mt, length of incision 18.6 cm±2.4 cm and ODI 13±2.4）. There was not statistical difference in terms of Cobb angle on radiographs among the three approaches. Conclusion： The anterior approach surgery is conve- nient for resection of the vertebrae and reconstruction of vertebral height, but it is more complicated and traumatic. Hence it is mostly used for severe Denis type B fracture. The posterior approach is commonly applied to most thoracolumbar fractures and has fewer complications compared with the anterior approach, but it has some shortcomings as well. The paraspinal approach has great advantages compared with the展开更多
Background Lower cervical dislocation with locked facets is common in cervical injury. The locked facets include unilateral and bilateral types. Different successful closed reduction rates has been achieved between un...Background Lower cervical dislocation with locked facets is common in cervical injury. The locked facets include unilateral and bilateral types. Different successful closed reduction rates has been achieved between unilateral and bilateral types by using rapid skull traction, which was commonly used to reduce the cervical disiocaUon. It is important to investigate a suitable management specific to patients with different types of cervical locked facets. Methods A total of 38 patients with cervical dislocation with locked facet due to cervical injury treated by rapid skull traction and operation from 1988 to 2005 were reviewed. Rapid skull traction was used in all the patients. Successful closed reduction rate was 88.0% in patients with bilateral cervical locked facets and that was 15.4% in those with unilateral cervical locked facets. These data were then statistically compared by Chi-square test. Patients who were reduced successfully underwent anterior cervical discectomy and fusion at the injured level, and those who failed in closed reduction received posterior open reduction and fixation. Results In this series, there was statistically significant difference （P〈0.05） in the rate of successful closed skull traction reduction between unilateral and bilateral locked facets dislocation. Unilateral cervical locked facets dislocation was not easily reduced by skull traction which was suitable for reduction of bilateral cervical locked facets dislocation. However, unilateral cervical locked facets dislocation can be reduced by posterior open reduction. Conclusions Unilateral cervical locked facets dislocation should be treated immediately with posterior open reduction and instrumentation. Bilateral cervical locked facets dislocation can be reduced by rapid skull traction firstly and anterior cervical discectomy and interbody fusion later.展开更多
Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruc...Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engineering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its corresponding vertebra were manufactured using the rapid prototyping technique. Results： The accuracy of the drill template was confinned by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to customize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill template fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the personalized template. During surgery, no additional computer assistance was needed. Conclusions： The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising, Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.展开更多
OBJECTIVE: To investigate the mechanism associated with thoracolumbar burst fractures. METHODS: Stress distribution of the spine in the upright, flexion and extension positions was analyzed using a three-dimensional f...OBJECTIVE: To investigate the mechanism associated with thoracolumbar burst fractures. METHODS: Stress distribution of the spine in the upright, flexion and extension positions was analyzed using a three-dimensional finite element model of the spinal motion segment. RESULTS: Stress concentration was noted at the pedicle and posterosuperior part of the vertebral body near the pedicle. CONCLUSION: Stress concentration of the spine may be implicated in the biomechanical mechanism underlying thoracolumbar burst fractures.展开更多
To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae...To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae for spinal fusion in patients with thoracrolumbar vertebrate fractures. Seventy patients with thoracrolumbar vertebrate fractures were treated by short-segment pedicle screw fixation and were randomly divided into two groups. Fractures in group A （n=20） were rein-forced with posterior morselized bone grafting in vertebrae for spinal fusion, while patients group B （n=50） did not receive the morselized bone grafting for bone fusion. The two groups were compared in terms of kyphotic deformity, anterior vertebral height, instrument failure and neurological functions after the treatment. Frankel grading system was used for the evaluation of neurological evaluation and Denis scoring scale was employed for pain assessment. The results showed that the kyphosis correction was achieved in both group A and group B （group A： 6.4 degree; group B： 5.4 degree）/At the end of follow-up, kyphosis correction was maintained in group A but lost in group B （P=0.0001）. Postoperatively, greater anterior height was achieved in group A than in group B （P〈0.01）. During follow-up study, anterior vertebral height was maintained only in Group A （P〈0.001）. Both group A and group B showed good Denis pain scores （P1 and P2） but group A outdid group B in terms of control of severe and constant pain （P4 and P5）. By Frankel criteria, the changes in neurological functions in group A was better than those of group B （P〈0.001）. It is concluded that reinforcement of short-segment pedicle fixation with morselized bone grafting for the treatment of patients with thoracolumbar vertebrae fracture could achieve and maintain kyphosis correction, and it may also increase and maintain anterior vertebral height. Morselized bone grafting in vertebrae offers immediate spinal stability in patients with th展开更多
Objective： To investigate prospectively the effectiveness ofkyphoplasty with SKY bone expander system in treatment of compression fracture of thoracic/ lumbar vertebrae and correction of the deformity. Methods： Twe...Objective： To investigate prospectively the effectiveness ofkyphoplasty with SKY bone expander system in treatment of compression fracture of thoracic/ lumbar vertebrae and correction of the deformity. Methods： Twenty-five patients with thoracic/lumbar vertebral osteoporotic compression fracture were admitted to our hospital between March 2007 and March 2008, and treated by kyphoplasty with SKY bone expander system. Patient＇s pain status was rated with Visual Analogue Scale （VAS） score system 1 day before and 1 hour, 48 hours, 6 months, 12 months after surgery. In addition, Rolland-Mor- ris and Oswestry disability questionnaires （RDQ and ODI） were used for survey 1 day before and 1, 6, 12 months after surgery. Pre- and post-operative vertebral heights and Cobb＇s angles were measured based on the X-ray films and statistically analyzed. Results： There were 27 fractured vertebrae in these 25 patients. After SKY kyphoplasty, the Cobb＇s angles （9.8°±9.76°） were significantly reduced compared with preoperative angles （17.18°±9.35°, P〈0.05）, and the average improve- ment rate was 39%. Patients＇ pain VAS scores were also greatly improved after operation （P〈0.05）. Moreover, postoperative RDQ and ODI scores were significantly smaller than preoperative values （P〈0.05）. Conclusions： Kyphoplasty with SKY bone expander system provides an effective method for treating thoracic/ lumbar vertebral osteoporotic compression fracture, with the advantages of small surgical wound and short duration. It can effectively recover the anterior and medial heights of fractured vertebrae （33% and 50%, respectively）, reduce the Cobb＇s angle, quickly alleviate pain and improve patients＇ quality of life in a relatively short time period.展开更多
文摘Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using Sextant system in the retrospective non-randomized case-control study. Methods： Atotal of 38 consecutive non-randomized patients with type A thoracolumbar fractures, which had been stabilized posteriorly from December 2006 to March 2009, were examined retrospectively more than 9 months after surgery. Twenty-one patients had been treated conventionally with open pedicle screw fixation （OPSF） and 17 patients received minimally invasive treatment with Sextant percutaneous pedicle screw fixation （SPPSF）. As a method of evaluation, the incision size, the intraoperation and post- operative volume of blood loss, operation time, postoperative hospital stay, blood transfusion, the radiological assessment of the sagittal Cobb＇s angle, vertebral body angle and vertebral body height were recorded and compared. Results： All patients were followed up for 8-24 months （average 11.6 months）. There were significant differences in the incision size, surgical blood loss, surgical draining Joss, operation time, hospital stay after operation, blood transfusion, the proportion of antalgic supplement and postoperative incisional VAS between the two groups （P〈0.05）. Mean preoperative kyphotic deformity was 16.0° and improved by 9.3° after surgery in OPSF group, but 15.2° and 10.3° respectively in SPPSF group. Mean preoperative angle of the fractured vertebral body was 15.9°and improved by 7.9° after surgery in OPSF group, but 14.9° and 6.6° respectively in SPPSF group. Mean anterior vertebral body height （% of normal） was 67.3% before surgery and 95.8% after surgery, but 69.1% and 90.1% respectively in SPPSF group. Mean posterior vertebral body height （% of normal） was 93.3% before surgery and 99.5% after surgery, but 88.9% and 93.3% respectively in SPPSF group. Among the patien
基金Supported by The National Natural Science Foundation of China,No. 30670612
文摘AIM:To evaluate the effects of percutaneous ozone injection via the posterior-lateral route and inner margin of the facet joint in the treatment of large lumbar disc herniation.METHODS:Fifty-eight patients with large lumbar disc herniation were treated with percutaneous injection of ozone via the posterior-lateral route and inner margin of the facet joint under digital subtraction angiography.Second injections were performed 5 d after the initial injection.All patients were followed up for 6-18 mo.A modified Macnab method was used for assessing clinical outcomes after oxygen-ozone therapy.RESULTS:Successful puncture was obtained in all patients.The overall efficacy was 91.4;the outcome was the excellent in 37 cases(63.8),good in 16 cases(27.6) and fair/poor in 5 cases(8.6) according to the Macnab criteria.No severe complications were found throughout this study.CONCLUSION:Percutaneous intradiscal ozone injection via the posterior-lateral route and inner margin of the facet joint is effective and safe for treatment of large lumbar disc herniation.
基金This study was supported by National Natural Science Foundation of China （No.30772209）.
文摘Objective： To explore the advantages and indications of the paraspinal approach by anatomical study and clinical application.Methods： The anatomical data and clinical practice of 27 cases were analyzed to explore the accurate approach between the paraspinal muscles and the structure of ambient tissues, as well as the results of clinical application of paraspinal approach. The operation time, blood loss, incision length, radiographic result （Cobb angle, height of anterior edge of the vertebrae） were compared with those in 24cases treated by traditional approach.Results： Complete exposure of the facets could be easily performed by identifying natural cleavage plane between the multifidus and Iongissimus muscles. The natural muscular cleavage was （1.47±0.23） cm lateral to the midline for females, and （1.64±0.35） cm for males at T12 level. The distance was （3.3±0.6） cm lateral to the midline for females,and （3.7±1.0） cm for males at L4 level. In paraspinal approach group, the operation time was （76.2±15.7） min, blood loss was （91.6±16.9） ml and incision length was （7.6±0.8） cm. In traditional approach group, the operation time was （121.4±19.6） min, blood loss was （218.7±32.3 ） ml and incision length was （17.4±2.1） cm. To compare paraspinal approach with traditional approach, the operation time, blood loss and incision length had statistical difference （P〈0.05） and the radiographic result （Cobb angle, height of anterior edge of the vertebrae） had no statistical difference （P〉0.05）.Conclusions： When the paraspinal approach is performed through natural cleavage plane between the multifidus and longissimus muscles, there are no wide muscular disinsertions, leaving the supraspinous and interspinous ligaments intact. The distance of natural cleavage to the midline is different at T12 and L4 planes. By this approach,the facet joints can be explored easily and completely, and a clear surgical field will be available for the placement of pedicle scr
基金This research was supported by the National Natural Science Foundation of China （No.30772209）.
文摘Objective： The main treatment method used for thoracolumbar fractures is open reduction and in- ternal fixation. Commonly there are three surgical approaches： anterior, posterior and paraspinal. We attempt to compare the three approaches based on our clinical data analysis. Methods： A group of 94 patients with Denis type A or B thoracolumbar burst fracture between March 2008 and September 2010 were recruited in this study. These patients were treated by anterior-, posterioror paraspinal-approach reduction with or without decompression. The fracture was fixed with titanium mesh and Z-plate via anterior approach （24 patients）, screw and rod system via posterior approach （38 patients） or paraspinal approach （32 patients）. Clinical evaluations included operation duration, blood loss, inci- sion length, preoperative and postoperative Oswestry disability index （ODI）. Results： The average operation duration （94.1 min±13.7 rain）, blood loss （86.7 ml-20.0 ml）, length of incision （9.3 mm± 0.7 mm） and postoperative ODI （6±0.5） were significantly lower （P〈0.05） in paraspinal approach group than in traditional posterior approach group （operation duration 94.1 min±13.7 min, blood loss 143.3 ml±28.3 ml, length of incision 15.4 cm±2.1 cm and ODI 12±0.7） and anterior approach group （operation duration 176.3 min±20.7 min, blood loss 255.1 ml±38.4 mt, length of incision 18.6 cm±2.4 cm and ODI 13±2.4）. There was not statistical difference in terms of Cobb angle on radiographs among the three approaches. Conclusion： The anterior approach surgery is conve- nient for resection of the vertebrae and reconstruction of vertebral height, but it is more complicated and traumatic. Hence it is mostly used for severe Denis type B fracture. The posterior approach is commonly applied to most thoracolumbar fractures and has fewer complications compared with the anterior approach, but it has some shortcomings as well. The paraspinal approach has great advantages compared with the
文摘Background Lower cervical dislocation with locked facets is common in cervical injury. The locked facets include unilateral and bilateral types. Different successful closed reduction rates has been achieved between unilateral and bilateral types by using rapid skull traction, which was commonly used to reduce the cervical disiocaUon. It is important to investigate a suitable management specific to patients with different types of cervical locked facets. Methods A total of 38 patients with cervical dislocation with locked facet due to cervical injury treated by rapid skull traction and operation from 1988 to 2005 were reviewed. Rapid skull traction was used in all the patients. Successful closed reduction rate was 88.0% in patients with bilateral cervical locked facets and that was 15.4% in those with unilateral cervical locked facets. These data were then statistically compared by Chi-square test. Patients who were reduced successfully underwent anterior cervical discectomy and fusion at the injured level, and those who failed in closed reduction received posterior open reduction and fixation. Results In this series, there was statistically significant difference （P〈0.05） in the rate of successful closed skull traction reduction between unilateral and bilateral locked facets dislocation. Unilateral cervical locked facets dislocation was not easily reduced by skull traction which was suitable for reduction of bilateral cervical locked facets dislocation. However, unilateral cervical locked facets dislocation can be reduced by posterior open reduction. Conclusions Unilateral cervical locked facets dislocation should be treated immediately with posterior open reduction and instrumentation. Bilateral cervical locked facets dislocation can be reduced by rapid skull traction firstly and anterior cervical discectomy and interbody fusion later.
基金This project was supported by China Postdoctoral Science Foundation （20080431420） and Yunnan Natural Science Foundation （2008CD210）.
文摘Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engineering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its corresponding vertebra were manufactured using the rapid prototyping technique. Results： The accuracy of the drill template was confinned by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to customize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill template fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the personalized template. During surgery, no additional computer assistance was needed. Conclusions： The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising, Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.
基金supported by the National Natural Science Foundation of China(No3880785)
文摘OBJECTIVE: To investigate the mechanism associated with thoracolumbar burst fractures. METHODS: Stress distribution of the spine in the upright, flexion and extension positions was analyzed using a three-dimensional finite element model of the spinal motion segment. RESULTS: Stress concentration was noted at the pedicle and posterosuperior part of the vertebral body near the pedicle. CONCLUSION: Stress concentration of the spine may be implicated in the biomechanical mechanism underlying thoracolumbar burst fractures.
文摘To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae for spinal fusion in patients with thoracrolumbar vertebrate fractures. Seventy patients with thoracrolumbar vertebrate fractures were treated by short-segment pedicle screw fixation and were randomly divided into two groups. Fractures in group A （n=20） were rein-forced with posterior morselized bone grafting in vertebrae for spinal fusion, while patients group B （n=50） did not receive the morselized bone grafting for bone fusion. The two groups were compared in terms of kyphotic deformity, anterior vertebral height, instrument failure and neurological functions after the treatment. Frankel grading system was used for the evaluation of neurological evaluation and Denis scoring scale was employed for pain assessment. The results showed that the kyphosis correction was achieved in both group A and group B （group A： 6.4 degree; group B： 5.4 degree）/At the end of follow-up, kyphosis correction was maintained in group A but lost in group B （P=0.0001）. Postoperatively, greater anterior height was achieved in group A than in group B （P〈0.01）. During follow-up study, anterior vertebral height was maintained only in Group A （P〈0.001）. Both group A and group B showed good Denis pain scores （P1 and P2） but group A outdid group B in terms of control of severe and constant pain （P4 and P5）. By Frankel criteria, the changes in neurological functions in group A was better than those of group B （P〈0.001）. It is concluded that reinforcement of short-segment pedicle fixation with morselized bone grafting for the treatment of patients with thoracolumbar vertebrae fracture could achieve and maintain kyphosis correction, and it may also increase and maintain anterior vertebral height. Morselized bone grafting in vertebrae offers immediate spinal stability in patients with th
文摘Objective： To investigate prospectively the effectiveness ofkyphoplasty with SKY bone expander system in treatment of compression fracture of thoracic/ lumbar vertebrae and correction of the deformity. Methods： Twenty-five patients with thoracic/lumbar vertebral osteoporotic compression fracture were admitted to our hospital between March 2007 and March 2008, and treated by kyphoplasty with SKY bone expander system. Patient＇s pain status was rated with Visual Analogue Scale （VAS） score system 1 day before and 1 hour, 48 hours, 6 months, 12 months after surgery. In addition, Rolland-Mor- ris and Oswestry disability questionnaires （RDQ and ODI） were used for survey 1 day before and 1, 6, 12 months after surgery. Pre- and post-operative vertebral heights and Cobb＇s angles were measured based on the X-ray films and statistically analyzed. Results： There were 27 fractured vertebrae in these 25 patients. After SKY kyphoplasty, the Cobb＇s angles （9.8°±9.76°） were significantly reduced compared with preoperative angles （17.18°±9.35°, P〈0.05）, and the average improve- ment rate was 39%. Patients＇ pain VAS scores were also greatly improved after operation （P〈0.05）. Moreover, postoperative RDQ and ODI scores were significantly smaller than preoperative values （P〈0.05）. Conclusions： Kyphoplasty with SKY bone expander system provides an effective method for treating thoracic/ lumbar vertebral osteoporotic compression fracture, with the advantages of small surgical wound and short duration. It can effectively recover the anterior and medial heights of fractured vertebrae （33% and 50%, respectively）, reduce the Cobb＇s angle, quickly alleviate pain and improve patients＇ quality of life in a relatively short time period.
