It was very difficult for the smelting of vanadium-bearing titanomagnetite by blast furnace because the content of TiO2 of blast furnace slag could amount to 20%-25%.After long term development and continuous improvem...It was very difficult for the smelting of vanadium-bearing titanomagnetite by blast furnace because the content of TiO2 of blast furnace slag could amount to 20%-25%.After long term development and continuous improvement,special intensified smelting technologies for vanadium-bearing titanomagnetite by blast furnace were obtained and improved gradually.With the improvement of beneficiated material level and equipment level,smelting intensity has been increased gradually and the highest comprehensive smelting intensity reached 1.45 t/（m3·d）.Technical-economic indexes of blast furnace have also been increased remarkably.The highest utilization coefficient exceeded 2.7 t/（m3·d）on the condition that the burden grade was only about 50%.展开更多
The smelting-separation process for metallized pellets of vanadium-bearing titanomagnetite concentrates was studied.The influences of smelting temperature,smelting time,and the basicity of the metallized pellet on van...The smelting-separation process for metallized pellets of vanadium-bearing titanomagnetite concentrates was studied.The influences of smelting temperature,smelting time,and the basicity of the metallized pellet on vanadium and iron recovery were investigated.The characteristics of titanium slag were analyzed using X-ray diffraction,energy dispersive spectroscopy,and mineralographic microscopic analysis.The results demonstrate that appropriate increases in smelting temperature and smelting time can improve the vanadium and iron recovery from metallized pellets and are beneficial for the slag-iron separation.Although increasing the basicity of the metallized pellet can considerably improve the vanadium and iron recovery,the TiO;grade of titanium slag was decreased.Under the optimal conditions,90.17% of vanadium and 92.98% of iron in the metallized pellet were recovered,and the TiO;grade of titanium slag was 55.01%.It was found that anosovite,augite,spinel,glassiness,and metallic iron were the main mineral phases of the titanium slag.展开更多
The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultraso...The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultrasound and CaF_(2)(66.28%) exerts more evident effects than ultrasound(26.97%) and CaF_(2)(60.35%) alone,demonstrating the synergetic effect of ultrasound and CaF_(2).Kinetic analysis manifests that the product layer diffusion controls vanadium leaching in ultrasound system without CaF_(2),however product layer diffusion and interfacial reaction is the rate-controlling step for vanadium leaching in other three leaching systems.The combination of ultrasound and CaF_(2) notably decreases the activation energy(E_(a)) from 62.03 to 27.61 kJ/mol,nevertheless individual CaF_(2) only reduces the E_(a) to 50.70 kj/mol.X-ray diffraction and fourier transform infrared spectrometer analyses show that the decomposition degree of the vanadium-bearing mica structure is the most significant in ultrasound and CaF_(2) system,proving the highest release degree of vanadium.Specific surface area and pore distribution combined with scanning electron microscope analyses reveal that the action of ultrasound and CaF_(2) would provide higher specific surface area,more abundant pores structure and cracks for the particles,which further prompts the rapid diffusion of H^(+),F^(-)and HF,and achieves the conspicuous improvement of vanadium leaching recovery.展开更多
The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of s...The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature.展开更多
In order to improve leaching efficiency of vanadium from stone coal,the combination of blank roasting and bioleaching using Bacillus mucilaginosus(B.mucilaginosus)mutants was evaluated.The atmospheric and room tempera...In order to improve leaching efficiency of vanadium from stone coal,the combination of blank roasting and bioleaching using Bacillus mucilaginosus(B.mucilaginosus)mutants was evaluated.The atmospheric and room temperature plasma(ARTP)technique was used to generate B.mucilaginosus mutants.The results showed that a mutant B.mucilaginosus BM-50,after ARTP irradiation for 50 s,had the highest acid production.The total content of the organic acid produced by B.mucilaginosus BM-50 was nearly doubled compared with the wild strain after 2 days.After 20 days,vanadium leaching rate with B.mucilaginosus BM-50 reached 18.2%,which was improved compared with the original bacteria(15.3%).A pretreatment via blank roasting for stone coal further improved the vanadium dissolution by bioleaching,namely,68.3%vanadium was extracted,which was much higher than that without blank roasting.It is shown that bioleaching by bacterial mutants by ARTP irradiation combined with blank roasting has great potential for improving vanadium recovery from low-grade vanadium bearing stone coal.展开更多
The efficient recycling of vanadium from converter vanadium-bearing slag is highly significant for sustainable development and circular economy.The key to developing novel processes and improving traditional routes li...The efficient recycling of vanadium from converter vanadium-bearing slag is highly significant for sustainable development and circular economy.The key to developing novel processes and improving traditional routes lies in the thermodynamic data.In this study,the equilibrium phase relations for the Fe_(2)O_(3)-TiO_(2)-V_(2)O_(5)system at 1200℃in air were investigated using a high-temperature equilibrium-quenching technique,followed by analysis using scanning electron microscopy-energy dispersive X-ray spectrometer and X-ray photoelectron spectroscopy.One liquid-phase region,two two-phase regions(liquid-rutile and liquid-ferropseudobrookite),and one three-phase region(liquid-rutile-ferropseudobrookite)were determined.The variation in the TiO_(2)and V_(2)O_(5)contents with the Fe_(2)O_(3)content was examined for rutile and ferropseudobrookite solid solutions.However,on further comparison with the predictions of FactSage 8.1,significant discrepancies were identified,highlighting that greater attention must be paid to updating the current thermodynamic database related to vanadium-bearing slag systems.展开更多
The recovery of vanadium(V)from stone coal by bioleaching is a promising method.The bioleaching experiments and the biosorption experiments were carried out,aiming to explore the adsorption characteristics of Bacillus...The recovery of vanadium(V)from stone coal by bioleaching is a promising method.The bioleaching experiments and the biosorption experiments were carried out,aiming to explore the adsorption characteristics of Bacillus mucilaginosus(B.mucilaginosus)on the surface of vanadium-bearing stone coal,and the related mechanisms have been investigated.After bioleaching at 30℃ for 28 d,the cumulative leaching rate of V reached 60.2%.The biosorption of B.mucilaginosus on stone coal was affected by many factors.When the pH value of leaching system is 5.0,strong electrostatic attraction between bacteria and stone coal promoted biosorption.Bacteria in the logarithmic growth phase had mature and excellent biosorption properties.The initial bacterial concentration of 3.5×10^(8) CFU/mL was conducive to adhesion,with 38.9%adsorption rate and 3.6×10^(7) CFU/g adsorption quantity.The adsorption of B.mucilaginosus on the stone coal conformed to the Freundlich model and the pseudo-second-order kinetic model.Bacterial surface carried functional groups(-CH_(2),-CH_(3),-NH_(2),etc.),which were highly correlated with the adsorption behavior.In addition,biosorption changed the surface properties of stone coal,resulting in the isoelectric point(IEP)approaching the bacteria.The results could provide an effective reference for the adsorption laws of bacteria on minerals.展开更多
The reduction behaviors of FeO·V2O3 and FeO·Cr2O3 during coal-based direct reduction have a decisive impact on the efficient utilization of high-chromium vanadium-bearing titanomagnetite concentrates. The ef...The reduction behaviors of FeO·V2O3 and FeO·Cr2O3 during coal-based direct reduction have a decisive impact on the efficient utilization of high-chromium vanadium-bearing titanomagnetite concentrates. The effects of molar ratio of C to Fe n(C)/n(Fe) and temperature on the behaviors of vanadium and chromium during direct reduction and magnetic separation were investigated. The reduced samples were characterized by X-ray diffraction(XRD), scanning election microscopy(SEM) and energy dispersive spectrometry(EDS) techniques. Experimental results indicate that the recoveries of vanadium and chromium rapidly increase from 10.0% and 9.6% to 45.3% and 74.3%, respectively, as the n(C)/n(Fe) increases from 0.8 to 1.4. At n(C)/n(Fe) of 0.8, the recoveries of vanadium and chromium are always lower than 10.0% in the whole temperature range of 1100-1250 °C. However, at n(C)/n(Fe) of 1.2, the recoveries of vanadium and chromium considerably increase from 17.8% and 33.8% to 42.4% and 76.0%, respectively, as the temperature increases from 1100 °C to 1250 °C. At n(C)/n(Fe) lower than 0.8, most of the FeO·V2O3 and FeO·Cr2O3 are not reduced to carbides because of the lack of carbonaceous reductants, and the temperature has little effect on the reduction behaviors of FeO·V2O3 and FeO·Cr2O3, resulting in very low recoveries of vanadium and chromium during magnetic separation. However, at higher n(C)/n(Fe), the reduction rates of FeO·V2O3 and FeO·Cr2O3 increase significatly because of the excess amount of carbonaceous reductants. Moreover, higher temperatures largely induce the reduction of FeO·V2O3 and FeO·Cr2O3 to carbides. The newly formed carbides are then dissolved in the γ(FCC) phase, and recovered accompanied with the metallic iron during magnetic separation.展开更多
A new process for vanadium recovery from stone coal by roasting-flotation was investigated based on the mineralogy. The process comprised four key steps： decarburization, preferential grinding, desliming and flotatio...A new process for vanadium recovery from stone coal by roasting-flotation was investigated based on the mineralogy. The process comprised four key steps： decarburization, preferential grinding, desliming and flotation. In the decarburization stage, roasting at 550 ℃ effectively avoided the negative effect of the carbonaceous materials in raw ore and generation of free CaO from calcite decomposition during roasting. Through preferential grinding, the high acid-consuming minerals were enriched in the middle fractions, while mica was enriched in the fine and coarse fractions. Through flotation, the final concentrate can be obtained with V2O5 grade of 1.07% and recovery of 83.30%. Moreover, the vanadium leaching rate of the final concentrate increased 13.53% compared to that of the feed. The results reveal that the decarburization by roasting at 550 ℃ is feasible and has little negative impact on mica flotation, and vanadium recovery from stone coal is conducive to reducing handling quantity, acid consumption and production cost.展开更多
Vanadium extraction of vanadium-bearing titanomagnetite was investigated by selective chlorination. Thermodynamics analyses on the interactive reactions among related species in the system were made before the experim...Vanadium extraction of vanadium-bearing titanomagnetite was investigated by selective chlorination. Thermodynamics analyses on the interactive reactions among related species in the system were made before the experiments. Some fundamental experiments for extracting vanadium by FeClx as chlorinating agent were conducted over the temperature range of 900-1300 K under air or oxygen atmosphere. The results show that vanadium can be extracted by the selective chlorination, using FeClx, based on thermodynamic analysis and experiment. Vanadium extraction ratio first increases with the increase of temperature, and then decreases with the increase of temperature over the range of 900-1300 K under air or oxygen atmosphere. The higher molar ratio of FeCI3 to oxides （nchl：noxd） reacting with FeC13, the higher ratio of vanadium extraction. Under oxygen atmosphere, the vanadium extraction ratio is up to 32% at 1100 K for 2 h by using FeCI3 as chlorinating agent.展开更多
The component activity of Mn in Fe-C-Mn system as well as the component activities of C and Si in Fe-C-Si system was predicted by applying the pseudo-multicomponent approach of the molecular interaction volume model ...The component activity of Mn in Fe-C-Mn system as well as the component activities of C and Si in Fe-C-Si system was predicted by applying the pseudo-multicomponent approach of the molecular interaction volume model （MIVM） and the Wagner interaction parameter formalism （WIPF） respectively. The average relative errors between the predicted values of MIVM and the experimental data for the three components were 4.5 0%, 17.0% and 13.0 %, respectively, and those between the calculation results of the WIPF and the experimental data were 18.0K for Mn, 9.0% for C and 27.0% for Si. The results indicated that the MIVM method could better predict the component activity of carbonaceous iron-based solution. Based on the data in an actual blowing process, the MIVM method was applied to predict the component activities of C and V as well as the transition temperature of vanadium oxidization （TTVO） in Fe-C-V-Si quaternary iron-based solution, and a comparative analysis of the predictions against the ex- perimental data was carried out, with their average relative errors being 24.0% for C, 7.3% for V and 1.0% for TTVO respectively. On that basis, the TTVO at Panzhihua Iron and Steel （Group） Co. , Ltd. was estimated by the MIVM method and an expression that the TTVO changed with composition and temperature of iron solutions was obtained by multiple linear regression method. The research results showed that the estimated values were in good agree- ment with the practical data.展开更多
The precipitates and hydrogen permeation behavior were studied in the low carbon steel for enameling.During the preparation of samples,Ti containing and Ti free in vanadium-bearing microalloyed low carbon steel heatin...The precipitates and hydrogen permeation behavior were studied in the low carbon steel for enameling.During the preparation of samples,Ti containing and Ti free in vanadium-bearing microalloyed low carbon steel heating at 750℃ for 3 h,were adopted after cold-rolling.It was found that the a large number of fine VC,TiC,TiN and Ti 4 C 2 S 2 precipitates were in samples of Vanadium-bearing microalloyed low carbon steel with Ti element.And fine VC,Fe 3 C and MnS precipitates were in steels without Ti element.So the numbers of precipitates in the former is more bigger than the later.The activation energies for hydrogen diffusion in both samples are 26.5 and 23.7 kJ/mol,respectively.But at 25℃,the effective diffusion coefficients in the samples for Ti containing and Ti free in Vanadium-bearing microalloyed low carbon steel were measured as 2.71×10-6 and 4.22×10-6 cm 2 /s,respectively.No fishscaling defect occurred in the former and heavy fishscaling defect in the later.展开更多
The thermodynamics,kinetics,phase transformation,and microstructure evolution of vanadium-bearing stone coal during suspension roasting were systematically investigated.Thermodynamic calculations showed that the carbo...The thermodynamics,kinetics,phase transformation,and microstructure evolution of vanadium-bearing stone coal during suspension roasting were systematically investigated.Thermodynamic calculations showed that the carbon in the stone coal burned and produced CO_(2) in sufficient oxygen during roasting.The mass loss of stone coal mainly occurred within the temperature range from 600 to 840℃,and the thermal decomposition reaction rate increased to the peak at approximately 700℃.Verified by the Flynn−Wall−Ozawa(FWO)and Kissinger−Akahira−Sunose(KAS)methods,the thermal decomposition reaction of stone coal was described by the Ginstling−Brounshtein equation.The apparent activation energy and pre-exponential factors were 136.09 kJ/mol and 12.40 s^(−1),respectively.The illite in stone coal lost hydroxyl groups and produced dehydrated illite at 650℃,and the structure of sericite was gradually destroyed.The surface of stone coal became rough and irregular as the temperature increased.Severe sintering occurred at the roasting temperature of 850℃.展开更多
In situ selective carbothermic reactions and vacuum sintering were used to prepare iron-based friction material directly vanadium-bearing titanomagnetite concentrates.Effects of phosphorus addition(0.05–0.20 wt.%)on ...In situ selective carbothermic reactions and vacuum sintering were used to prepare iron-based friction material directly vanadium-bearing titanomagnetite concentrates.Effects of phosphorus addition(0.05–0.20 wt.%)on the microstructure and properties of iron-based friction material were investigated.The results show that the addition of phosphorus improves the microstructure and properties of the material significantly.When phosphorus addition increases to 0.15 wt.%,the sintering densification is promoted and the number of lamellar pearlites increases.Therefore,the relative density,hardness and tribological properties of the material are greatly enhanced.Particularly,the friction coefficient decreases 0.58 to 0.43,and the wear rate reduces 1.829×10^(–7) to 0.694×10^(–7)cm^(3)J^(-1).The dominant wear mechanism of the material changes severe abrasive wear to mild oxidation wear accordingly.However,when phosphorus addition exceeds 0.15 wt.%,the matrix continuity and tribological properties of the material are deteriorated.Comprehensively,the optimal addition of phosphorus in the iron-based friction material is 0.15 wt.%.展开更多
Vanadium-bearing titanomagnetite carbon composite briquette(VTM-CCB)was proposed as an innovative and promising blast furnace burden to realize low-carbon and high-efficiency ironmaking.To optimize the compositions of...Vanadium-bearing titanomagnetite carbon composite briquette(VTM-CCB)was proposed as an innovative and promising blast furnace burden to realize low-carbon and high-efficiency ironmaking.To optimize the compositions of VTM-CCB based on its softening–melting–dripping characteristics,the evolution behavior and mechanisms of VTM-CCB in cohesive zone and dripping zone were investigated by conducting softening–melting tests under blast furnace conditions.The results show that the structure evolution of VTM-CCB in softening–melting process is correlated to the molten slag,metallic iron,liquid iron,and residual carbon.With the molar ratio of the fixed carbon to the reducible oxygen in iron oxides(FC/O ratio)ranging from 0.8 to 1.0,the VTM-CCB tends to form dense structure and accelerate the softening and melting.With increasing the FC/O ratio to 1.2 and 1.4,the VTM-CCB tends to form concentric circular structure,which could suppress the collapse of packed bed,shift down the location of core cohesive zone,and improve the gas permeability.Although the appropriate increase in FC/O ratio could improve the softening–melting performance of VTM-CCB,a higher FC/O ratio could also promote the precipitation of Ti(C,N),thereby thickening the molten mixtures and deteriorating the dripping behavior.Fully considering the softening–melting–dripping characteristics and permeability,the appropriate FC/O ratio of VTM-CCB should be controlled in the range of 1.0–1.2.展开更多
文摘It was very difficult for the smelting of vanadium-bearing titanomagnetite by blast furnace because the content of TiO2 of blast furnace slag could amount to 20%-25%.After long term development and continuous improvement,special intensified smelting technologies for vanadium-bearing titanomagnetite by blast furnace were obtained and improved gradually.With the improvement of beneficiated material level and equipment level,smelting intensity has been increased gradually and the highest comprehensive smelting intensity reached 1.45 t/（m3·d）.Technical-economic indexes of blast furnace have also been increased remarkably.The highest utilization coefficient exceeded 2.7 t/（m3·d）on the condition that the burden grade was only about 50%.
基金Item Sponsored by National Natural Science Foundation of China(51174122)
文摘The smelting-separation process for metallized pellets of vanadium-bearing titanomagnetite concentrates was studied.The influences of smelting temperature,smelting time,and the basicity of the metallized pellet on vanadium and iron recovery were investigated.The characteristics of titanium slag were analyzed using X-ray diffraction,energy dispersive spectroscopy,and mineralographic microscopic analysis.The results demonstrate that appropriate increases in smelting temperature and smelting time can improve the vanadium and iron recovery from metallized pellets and are beneficial for the slag-iron separation.Although increasing the basicity of the metallized pellet can considerably improve the vanadium and iron recovery,the TiO;grade of titanium slag was decreased.Under the optimal conditions,90.17% of vanadium and 92.98% of iron in the metallized pellet were recovered,and the TiO;grade of titanium slag was 55.01%.It was found that anosovite,augite,spinel,glassiness,and metallic iron were the main mineral phases of the titanium slag.
基金supported by the National Natural Science Foundation of China (51874222 and 52074204)the Fundamental Research Funds for the Central Universities (No. 2020-YB029)。
文摘The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultrasound and CaF_(2)(66.28%) exerts more evident effects than ultrasound(26.97%) and CaF_(2)(60.35%) alone,demonstrating the synergetic effect of ultrasound and CaF_(2).Kinetic analysis manifests that the product layer diffusion controls vanadium leaching in ultrasound system without CaF_(2),however product layer diffusion and interfacial reaction is the rate-controlling step for vanadium leaching in other three leaching systems.The combination of ultrasound and CaF_(2) notably decreases the activation energy(E_(a)) from 62.03 to 27.61 kJ/mol,nevertheless individual CaF_(2) only reduces the E_(a) to 50.70 kj/mol.X-ray diffraction and fourier transform infrared spectrometer analyses show that the decomposition degree of the vanadium-bearing mica structure is the most significant in ultrasound and CaF_(2) system,proving the highest release degree of vanadium.Specific surface area and pore distribution combined with scanning electron microscope analyses reveal that the action of ultrasound and CaF_(2) would provide higher specific surface area,more abundant pores structure and cracks for the particles,which further prompts the rapid diffusion of H^(+),F^(-)and HF,and achieves the conspicuous improvement of vanadium leaching recovery.
基金Projects(51574067,51904063)supported by the National Natural Science Foundation of ChinaProjects(N172503016,N172502005,N172506011)supported by Fundamental Research Funds for the Central Universities,ChinaProject(2018M640259)supported by China Postdoctoral Science Foundation
文摘The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature.
基金Project(2015ZX07205003)supported by Major Science and Technology Program for Water Pollution Control and Treatment of China
文摘In order to improve leaching efficiency of vanadium from stone coal,the combination of blank roasting and bioleaching using Bacillus mucilaginosus(B.mucilaginosus)mutants was evaluated.The atmospheric and room temperature plasma(ARTP)technique was used to generate B.mucilaginosus mutants.The results showed that a mutant B.mucilaginosus BM-50,after ARTP irradiation for 50 s,had the highest acid production.The total content of the organic acid produced by B.mucilaginosus BM-50 was nearly doubled compared with the wild strain after 2 days.After 20 days,vanadium leaching rate with B.mucilaginosus BM-50 reached 18.2%,which was improved compared with the original bacteria(15.3%).A pretreatment via blank roasting for stone coal further improved the vanadium dissolution by bioleaching,namely,68.3%vanadium was extracted,which was much higher than that without blank roasting.It is shown that bioleaching by bacterial mutants by ARTP irradiation combined with blank roasting has great potential for improving vanadium recovery from low-grade vanadium bearing stone coal.
基金financially supported by the National Natural Science Foundation of China(No.52204310)the China Postdoctoral Science Foundation(Nos.2020TQ0059 and 2020M570967)+3 种基金the Natural Science Foundation of Liaoning Province,China(No.2021-MS-083)the Fundamental Research Funds for the Central Universities(No.N2125010)the Open Project Program of Key Laboratory of Metallurgical Emission Reduction&Resources Recycling(Anhui University of Technology)of Ministry of Education(No.JKF22-02)the Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education.
文摘The efficient recycling of vanadium from converter vanadium-bearing slag is highly significant for sustainable development and circular economy.The key to developing novel processes and improving traditional routes lies in the thermodynamic data.In this study,the equilibrium phase relations for the Fe_(2)O_(3)-TiO_(2)-V_(2)O_(5)system at 1200℃in air were investigated using a high-temperature equilibrium-quenching technique,followed by analysis using scanning electron microscopy-energy dispersive X-ray spectrometer and X-ray photoelectron spectroscopy.One liquid-phase region,two two-phase regions(liquid-rutile and liquid-ferropseudobrookite),and one three-phase region(liquid-rutile-ferropseudobrookite)were determined.The variation in the TiO_(2)and V_(2)O_(5)contents with the Fe_(2)O_(3)content was examined for rutile and ferropseudobrookite solid solutions.However,on further comparison with the predictions of FactSage 8.1,significant discrepancies were identified,highlighting that greater attention must be paid to updating the current thermodynamic database related to vanadium-bearing slag systems.
基金supported by the National Natural Science Foundation of China(No.51874018)。
文摘The recovery of vanadium(V)from stone coal by bioleaching is a promising method.The bioleaching experiments and the biosorption experiments were carried out,aiming to explore the adsorption characteristics of Bacillus mucilaginosus(B.mucilaginosus)on the surface of vanadium-bearing stone coal,and the related mechanisms have been investigated.After bioleaching at 30℃ for 28 d,the cumulative leaching rate of V reached 60.2%.The biosorption of B.mucilaginosus on stone coal was affected by many factors.When the pH value of leaching system is 5.0,strong electrostatic attraction between bacteria and stone coal promoted biosorption.Bacteria in the logarithmic growth phase had mature and excellent biosorption properties.The initial bacterial concentration of 3.5×10^(8) CFU/mL was conducive to adhesion,with 38.9%adsorption rate and 3.6×10^(7) CFU/g adsorption quantity.The adsorption of B.mucilaginosus on the stone coal conformed to the Freundlich model and the pseudo-second-order kinetic model.Bacterial surface carried functional groups(-CH_(2),-CH_(3),-NH_(2),etc.),which were highly correlated with the adsorption behavior.In addition,biosorption changed the surface properties of stone coal,resulting in the isoelectric point(IEP)approaching the bacteria.The results could provide an effective reference for the adsorption laws of bacteria on minerals.
基金Projects(2013CB632601,2013CB632604)supported by the National Basic Research Program of ChinaProject(51125018)supported by the National Science Foundation for Distinguished Young Scholars of China+1 种基金Project(KGZD-EW-201-2)supported by the Key Research Program of the Chinese Academy of SciencesProjects(51374191,21106167,51104139)supported by the National Natural Science Foundation of China
文摘The reduction behaviors of FeO·V2O3 and FeO·Cr2O3 during coal-based direct reduction have a decisive impact on the efficient utilization of high-chromium vanadium-bearing titanomagnetite concentrates. The effects of molar ratio of C to Fe n(C)/n(Fe) and temperature on the behaviors of vanadium and chromium during direct reduction and magnetic separation were investigated. The reduced samples were characterized by X-ray diffraction(XRD), scanning election microscopy(SEM) and energy dispersive spectrometry(EDS) techniques. Experimental results indicate that the recoveries of vanadium and chromium rapidly increase from 10.0% and 9.6% to 45.3% and 74.3%, respectively, as the n(C)/n(Fe) increases from 0.8 to 1.4. At n(C)/n(Fe) of 0.8, the recoveries of vanadium and chromium are always lower than 10.0% in the whole temperature range of 1100-1250 °C. However, at n(C)/n(Fe) of 1.2, the recoveries of vanadium and chromium considerably increase from 17.8% and 33.8% to 42.4% and 76.0%, respectively, as the temperature increases from 1100 °C to 1250 °C. At n(C)/n(Fe) lower than 0.8, most of the FeO·V2O3 and FeO·Cr2O3 are not reduced to carbides because of the lack of carbonaceous reductants, and the temperature has little effect on the reduction behaviors of FeO·V2O3 and FeO·Cr2O3, resulting in very low recoveries of vanadium and chromium during magnetic separation. However, at higher n(C)/n(Fe), the reduction rates of FeO·V2O3 and FeO·Cr2O3 increase significatly because of the excess amount of carbonaceous reductants. Moreover, higher temperatures largely induce the reduction of FeO·V2O3 and FeO·Cr2O3 to carbides. The newly formed carbides are then dissolved in the γ(FCC) phase, and recovered accompanied with the metallic iron during magnetic separation.
基金Project(2015BAB03B05)supported by the National Key Technology R&D Program during the"12th Five-year Plan"Period,ChinaProject(51404177)supported by the National Natural Science Foundation of China
文摘A new process for vanadium recovery from stone coal by roasting-flotation was investigated based on the mineralogy. The process comprised four key steps： decarburization, preferential grinding, desliming and flotation. In the decarburization stage, roasting at 550 ℃ effectively avoided the negative effect of the carbonaceous materials in raw ore and generation of free CaO from calcite decomposition during roasting. Through preferential grinding, the high acid-consuming minerals were enriched in the middle fractions, while mica was enriched in the fine and coarse fractions. Through flotation, the final concentrate can be obtained with V2O5 grade of 1.07% and recovery of 83.30%. Moreover, the vanadium leaching rate of the final concentrate increased 13.53% compared to that of the feed. The results reveal that the decarburization by roasting at 550 ℃ is feasible and has little negative impact on mica flotation, and vanadium recovery from stone coal is conducive to reducing handling quantity, acid consumption and production cost.
基金Projects(51374061,51074040)supported by the National Natural Science Foundation of ChinaProject(201202064)supported by the Natural Science Foundation of Liaoning Province,ChinaProject(N120402004)supported by the Fundamental Research Funds for the Central Universities,China
文摘Vanadium extraction of vanadium-bearing titanomagnetite was investigated by selective chlorination. Thermodynamics analyses on the interactive reactions among related species in the system were made before the experiments. Some fundamental experiments for extracting vanadium by FeClx as chlorinating agent were conducted over the temperature range of 900-1300 K under air or oxygen atmosphere. The results show that vanadium can be extracted by the selective chlorination, using FeClx, based on thermodynamic analysis and experiment. Vanadium extraction ratio first increases with the increase of temperature, and then decreases with the increase of temperature over the range of 900-1300 K under air or oxygen atmosphere. The higher molar ratio of FeCI3 to oxides （nchl：noxd） reacting with FeC13, the higher ratio of vanadium extraction. Under oxygen atmosphere, the vanadium extraction ratio is up to 32% at 1100 K for 2 h by using FeCI3 as chlorinating agent.
基金Item Sponsored by National Natural Science Foundation of China(51090381,50764006)
文摘The component activity of Mn in Fe-C-Mn system as well as the component activities of C and Si in Fe-C-Si system was predicted by applying the pseudo-multicomponent approach of the molecular interaction volume model （MIVM） and the Wagner interaction parameter formalism （WIPF） respectively. The average relative errors between the predicted values of MIVM and the experimental data for the three components were 4.5 0%, 17.0% and 13.0 %, respectively, and those between the calculation results of the WIPF and the experimental data were 18.0K for Mn, 9.0% for C and 27.0% for Si. The results indicated that the MIVM method could better predict the component activity of carbonaceous iron-based solution. Based on the data in an actual blowing process, the MIVM method was applied to predict the component activities of C and V as well as the transition temperature of vanadium oxidization （TTVO） in Fe-C-V-Si quaternary iron-based solution, and a comparative analysis of the predictions against the ex- perimental data was carried out, with their average relative errors being 24.0% for C, 7.3% for V and 1.0% for TTVO respectively. On that basis, the TTVO at Panzhihua Iron and Steel （Group） Co. , Ltd. was estimated by the MIVM method and an expression that the TTVO changed with composition and temperature of iron solutions was obtained by multiple linear regression method. The research results showed that the estimated values were in good agree- ment with the practical data.
文摘The precipitates and hydrogen permeation behavior were studied in the low carbon steel for enameling.During the preparation of samples,Ti containing and Ti free in vanadium-bearing microalloyed low carbon steel heating at 750℃ for 3 h,were adopted after cold-rolling.It was found that the a large number of fine VC,TiC,TiN and Ti 4 C 2 S 2 precipitates were in samples of Vanadium-bearing microalloyed low carbon steel with Ti element.And fine VC,Fe 3 C and MnS precipitates were in steels without Ti element.So the numbers of precipitates in the former is more bigger than the later.The activation energies for hydrogen diffusion in both samples are 26.5 and 23.7 kJ/mol,respectively.But at 25℃,the effective diffusion coefficients in the samples for Ti containing and Ti free in Vanadium-bearing microalloyed low carbon steel were measured as 2.71×10-6 and 4.22×10-6 cm 2 /s,respectively.No fishscaling defect occurred in the former and heavy fishscaling defect in the later.
基金the Fundamental Research Funds for the Central Universities of China(No.N2101023).
文摘The thermodynamics,kinetics,phase transformation,and microstructure evolution of vanadium-bearing stone coal during suspension roasting were systematically investigated.Thermodynamic calculations showed that the carbon in the stone coal burned and produced CO_(2) in sufficient oxygen during roasting.The mass loss of stone coal mainly occurred within the temperature range from 600 to 840℃,and the thermal decomposition reaction rate increased to the peak at approximately 700℃.Verified by the Flynn−Wall−Ozawa(FWO)and Kissinger−Akahira−Sunose(KAS)methods,the thermal decomposition reaction of stone coal was described by the Ginstling−Brounshtein equation.The apparent activation energy and pre-exponential factors were 136.09 kJ/mol and 12.40 s^(−1),respectively.The illite in stone coal lost hydroxyl groups and produced dehydrated illite at 650℃,and the structure of sericite was gradually destroyed.The surface of stone coal became rough and irregular as the temperature increased.Severe sintering occurred at the roasting temperature of 850℃.
基金financially supported by the Science and Technology Plan of Panzhihua City in Sichuan Province of China under Grant No.2017CY-C-1.
文摘In situ selective carbothermic reactions and vacuum sintering were used to prepare iron-based friction material directly vanadium-bearing titanomagnetite concentrates.Effects of phosphorus addition(0.05–0.20 wt.%)on the microstructure and properties of iron-based friction material were investigated.The results show that the addition of phosphorus improves the microstructure and properties of the material significantly.When phosphorus addition increases to 0.15 wt.%,the sintering densification is promoted and the number of lamellar pearlites increases.Therefore,the relative density,hardness and tribological properties of the material are greatly enhanced.Particularly,the friction coefficient decreases 0.58 to 0.43,and the wear rate reduces 1.829×10^(–7) to 0.694×10^(–7)cm^(3)J^(-1).The dominant wear mechanism of the material changes severe abrasive wear to mild oxidation wear accordingly.However,when phosphorus addition exceeds 0.15 wt.%,the matrix continuity and tribological properties of the material are deteriorated.Comprehensively,the optimal addition of phosphorus in the iron-based friction material is 0.15 wt.%.
基金National Natural Science Foundation of China(U1808212),Natural Science Foundation of the Jiangsu Higher Education Institutions of China(20KJB45002)Postdoctoral Research Foundation of Jiangsu Province(7114451120)Transformation Program of Scientific and Technological Achievements of Inner Mongolia Autonomous Region(2019CG073).
文摘Vanadium-bearing titanomagnetite carbon composite briquette(VTM-CCB)was proposed as an innovative and promising blast furnace burden to realize low-carbon and high-efficiency ironmaking.To optimize the compositions of VTM-CCB based on its softening–melting–dripping characteristics,the evolution behavior and mechanisms of VTM-CCB in cohesive zone and dripping zone were investigated by conducting softening–melting tests under blast furnace conditions.The results show that the structure evolution of VTM-CCB in softening–melting process is correlated to the molten slag,metallic iron,liquid iron,and residual carbon.With the molar ratio of the fixed carbon to the reducible oxygen in iron oxides(FC/O ratio)ranging from 0.8 to 1.0,the VTM-CCB tends to form dense structure and accelerate the softening and melting.With increasing the FC/O ratio to 1.2 and 1.4,the VTM-CCB tends to form concentric circular structure,which could suppress the collapse of packed bed,shift down the location of core cohesive zone,and improve the gas permeability.Although the appropriate increase in FC/O ratio could improve the softening–melting performance of VTM-CCB,a higher FC/O ratio could also promote the precipitation of Ti(C,N),thereby thickening the molten mixtures and deteriorating the dripping behavior.Fully considering the softening–melting–dripping characteristics and permeability,the appropriate FC/O ratio of VTM-CCB should be controlled in the range of 1.0–1.2.
