期刊文献+
共找到235篇文章
< 1 2 12 >
每页显示 20 50 100
Tectonic Evolution of the Meso-Tethys in the Western Segment of Bangonghu-Nujiang Suture Zone: Insights from Geochemistry and Geochronology of the Lagkor Tso Ophiolite 被引量:18
1
作者 YUAN Yajuan YIN Zhengxin +6 位作者 LIU Weiliang HUANG Qiangtai LI Jianfeng LIU Hongfei WAN Zhifeng CAI Zhourong XIA Bin 《Acta Geologica Sinica(English Edition)》 SCIE CAS CSCD 2015年第2期369-388,共20页
The subduction of the Bangonghu-Nujiang Meso-Tethys and the collision between the Lhasa and Qiangtang blocks were important events in the growth of the Tibetan crust. However, the timing of collision initiation and cl... The subduction of the Bangonghu-Nujiang Meso-Tethys and the collision between the Lhasa and Qiangtang blocks were important events in the growth of the Tibetan crust. However, the timing of collision initiation and closure timing, as well as nature and structure of the Bangonghu ocean basin, are still poorly constrained. The Lagkor Tso ophiolite, located in the south of Gerze County, Tibet, is one of the most completed ophiolites preserved in the southern side of the Bangonghu- Nujiang suture zone. This study discussed the tectonic evolution of the Bangonghu-Nujiang suture zone as revealed by the Lagkor Tso ophiolite investigated by field investigations, petrology, geochemistry, geochronology and tectonic analysis methods. We present new LA-ICP-MS zircon U-Pb and 39Ar/4~Ar ages for the Lagkor Tso ophiolite, in addition to geochemical and platinum-group element (PGE) data presented for the Lagkor Tso ophiolite in Tibet. It is suggested that the ancient Lagkor Tso oceanic basin split in Middle Jurassic (161.2 ± 2.7 Ma - 165.4 ± 3.5 Ma), and experienced a second tectonic emplacement during the Early Cretaceous (137.90 ± 6.39 Ma). The Lagkor Tso ophiolite likely developed in an independent suture zone. The Bangonghu-Nujiang ocean subducted southwards, and the dehydration of the subducting oceanic crust materials caused partial melting of the continental mantle wedge, which formed the second-order expanding center of the obduction dish. This led to inter-arc expansion, followed by the formation of inter-arc and back-arc basins with island arc features, which are represented by ophiolites around the Shiquanhe-Lagkor Tso -Yongzhu region. The tectonic environment presently can be considered to be similar to that of the current Western Pacific, in which a large number of island arc-ocean basin systems are developed. 展开更多
关键词 OPHIOLITE GEOCHEMISTRY GEOCHRONOLOGY inter-arc basin Lagkor tso Bangonghu-Nujiangsuture zone
下载PDF
Test selection and optimization for PHM based on failure evolution mechanism model 被引量:8
2
作者 Jing Qiu Xiaodong Tan +1 位作者 Guanjun Liu Kehong L 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2013年第5期780-792,共13页
The test selection and optimization (TSO) can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management (PHM) systems. Traditionally, TSO mainly focuse... The test selection and optimization (TSO) can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management (PHM) systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability (DFT) to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model (FEMM) for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm (ASAGA) is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level. 展开更多
关键词 test selection and optimization tso prognostics and health management (PHM) failure evolution mechanism model (FEMM) adaptive simulated annealing genetic algorithm (ASAGA).
下载PDF
压裂充填防砂方案参数优化设计 被引量:8
3
作者 曲占庆 苏程 +1 位作者 温庆志 常琨 《特种油气藏》 CAS CSCD 北大核心 2012年第6期134-137,148,共4页
压裂充填防砂技术是针对油气井出砂现象发展起来的油层改造和防砂技术,是端部脱砂和充填两大技术的结合,具有增产与防砂的双重作用。建立了压裂防砂施工设计理论模型,编制施工设计软件。应用该软件对模型进行敏感性分析,以增产防砂效果... 压裂充填防砂技术是针对油气井出砂现象发展起来的油层改造和防砂技术,是端部脱砂和充填两大技术的结合,具有增产与防砂的双重作用。建立了压裂防砂施工设计理论模型,编制施工设计软件。应用该软件对模型进行敏感性分析,以增产防砂效果为目标,对支撑剂类型、施工排量、施工泵压、脱砂时间、支撑剂用量等参数进行了优化设计。现场应用表明,理论模型可靠,计算结果准确,对提高施工的成功率具有一定参考价值。 展开更多
关键词 压裂充填 端部脱砂 施工参数 优化设计
下载PDF
副枪在冶炼终点炉渣的测量与应用
4
作者 刘琛 迟永超 李国庆 《冶金能源》 2023年第2期62-64,共3页
如何快速准确地获得炉渣厚度对冶炼终点判断是否可以快速出钢很关键。文章介绍了副枪TSO探头的测量原理,根据副枪的运行轨迹,当副枪依次经过钢渣界面和渣气界面时,副枪TSO氧电势和温度的突变对应副枪旋转编码器的转动距离即为渣层厚度,... 如何快速准确地获得炉渣厚度对冶炼终点判断是否可以快速出钢很关键。文章介绍了副枪TSO探头的测量原理,根据副枪的运行轨迹,当副枪依次经过钢渣界面和渣气界面时,副枪TSO氧电势和温度的突变对应副枪旋转编码器的转动距离即为渣层厚度,为快速出钢提供重要依据,可缩短生产周期30 s,产生显著的经济效益和社会效益。 展开更多
关键词 副枪 渣层厚度 tso 生产周期
下载PDF
基于TSO优化SVM的滚动轴承故障诊断
5
作者 张叶凯 胡亮 +2 位作者 丰亚辉 何雨鑫 张帅辉 《煤矿机械》 2023年第12期168-172,共5页
介绍了一种基于金枪鱼群优化(TSO)算法优化支持向量机(SVM)模型的滚动轴承故障诊断方法。该方法将SVM模型的超参数作为优化问题的变量,将SVM模型的性能指标作为优化问题的目标函数,并使用TSO算法来搜索最优解,以优化SVM模型的分类性能... 介绍了一种基于金枪鱼群优化(TSO)算法优化支持向量机(SVM)模型的滚动轴承故障诊断方法。该方法将SVM模型的超参数作为优化问题的变量,将SVM模型的性能指标作为优化问题的目标函数,并使用TSO算法来搜索最优解,以优化SVM模型的分类性能。实验结果表明,相比传统的SVM方法,TSO-SVM模型在滚动轴承故障诊断中具有更高的分类准确率和诊断精度,证明了该方法的有效性和优越性。 展开更多
关键词 tso SVM 滚动轴承 故障诊断
下载PDF
DIFFUSION MODELLING IN GARNET FROM TSO MORARI ECLOGITE AND IMPLICATIONS FOR EXHUMATION MODELS 被引量:4
6
作者 Patrick J.,O’Brien 1,Himanshu K. Sachan 2 (1 Bayerisches Geoinstitut, Universitt Bayreuth, D\|95440 Bayreuth, Germany,E\|mail:Patrick. Obrien@uni\|bayreuth.de 2 Wadia Institute of Himalayan Geology, Dehra Dun\|248001, India,E\|mail:wihg@giasdl01. 《地学前缘》 EI CAS CSCD 2000年第S1期25-27,共3页
The results of recent geothermobarometric and geochronological investigations of scarce eclogites of the NW Himalaya (Tso Morari (Ladakh), India and Kaghan Valley, Pakistan) have caused a major rethink of tectonometam... The results of recent geothermobarometric and geochronological investigations of scarce eclogites of the NW Himalaya (Tso Morari (Ladakh), India and Kaghan Valley, Pakistan) have caused a major rethink of tectonometamorphic models for India\|Asia collision. Numerous petrologic studies have been undertaken on the age and origin of metamorphism in the Higher Himalayan Crystallines (HHC) and Lesser Himalaya formations (LH) and their relationship to granite magmatism and movements along the Main Central Thrust (MCT) and South Tibetan Detachment Fault (STDF). However, all of these events are essentially Miocene (or younger) in age and can clearly be distinguished from subduction and exhumation processes undergone by the eclogites which are of Eocene age (Tonarini et al. 1993; Spencer & Gebauer; 1996; de Sigoyer et al. 1999) and relate to the very early stages of the collision. Eclogites of eastern Ladakh are mafic lenses found in granitic gneisses (Ordovician intrusive age: Girard & Bussy 1999) and their surrounding late Pre\|Cambrian to early Cambrian sedimentary units in the Tso Morari dome (see Steck et al. 1998). Detailed petrological and geochronological studies (Guillot et al. 1997; de Sigoyer et al. 1997, 1999) have identified an eclogite facies stage (2000±300)MPa, (580±60)℃ followed by isothermal decompression associated with glaucophane growth at around (1100±200)MPa. Dating of different phases by different methods yielded ages around 55Ma for this stage ((55±17) Ma, U\|Pb, Aln; (55±12) Ma, Lu\|Hf, Grt\|Cpx\|Rt; (55±7) Ma, Sm\|Nd, Grt\|Gln\|Rt). A subsequent amphibolite facies overprint at slightly higher temperature (610±70)℃ was dated at 45~48Ma (metabasite: (47±11) Ma, Sm\|Nd, Grt\|Hbl; metapelite: (45±4) Ma, Rb\|Sr, Mu\|Ap\|WR and (48±2) Ma, Ar\|Ar, Phe). By (30±1) Ma (Ar\|Ar, Bt\|Mu) retrogression into the greenschist facies had occurred (de Sigoyer et al. 1999). These data indicate a two stage history with early exhumation being much faster (>4mm/a) than the later evolution (1~2mm/a) 展开更多
关键词 ECLOGITE tso Morari DIFFUSION modelling GARNET temperature\|time\|path
下载PDF
钻削碳纤维复合材料刀具磨损与加工质量的研究 被引量:6
7
作者 彭思泽 李鹏南 +2 位作者 唐思文 张帅 邱新义 《制造技术与机床》 北大核心 2015年第7期45-49,共5页
使用麻花钻进行钻削碳纤维增强树脂基复合材料T800的试验,研究了刀具磨损对轴向力、钻削温度以及出口形貌的影响。结果表明:随着转速增大,后刀面磨损值增大;转速低于4 000 r/min时,后刀面磨损值增大比较平缓,高于4 000 r/min时,后刀面... 使用麻花钻进行钻削碳纤维增强树脂基复合材料T800的试验,研究了刀具磨损对轴向力、钻削温度以及出口形貌的影响。结果表明:随着转速增大,后刀面磨损值增大;转速低于4 000 r/min时,后刀面磨损值增大比较平缓,高于4 000 r/min时,后刀面磨损急剧增大;随着进给速度增大,后刀面磨损值呈现先减小后增大的规律,在进给速度为60 mm/min时最小;随着刀具磨损增大,轴向力以及钻削温度增大,孔出口形貌变差;在转速低于1 000 r/min时,刀具磨损对温度影响很大,当转速高于2 500 r/min时,随着刀具磨损增大,温度增大比较平缓。 展开更多
关键词 T800 轴向力 钻削温度 后刀面磨损值 孔出口质量
下载PDF
基于余弦相似度和TSO-BP的短期光伏预测方法
8
作者 陆毅 薛枫 +3 位作者 唐小波 杨坤 李益 马刚 《浙江电力》 2024年第6期22-30,共9页
对光伏出力的精准预测在配电网安全稳定运行中起着至关重要的作用。因此,提出了一种基于余弦相似度和TSO-BP(金枪鱼群优化-反向传播)神经网络的短期光伏预测方法。首先,利用余弦相似度算法筛选出与预测日具有强相似度的历史数据作为训... 对光伏出力的精准预测在配电网安全稳定运行中起着至关重要的作用。因此,提出了一种基于余弦相似度和TSO-BP(金枪鱼群优化-反向传播)神经网络的短期光伏预测方法。首先,利用余弦相似度算法筛选出与预测日具有强相似度的历史数据作为训练样本;然后,采用TSO算法寻找BP神经网络的最优初始权值与阈值,训练TSO-BP短期光伏预测模型;最后,利用TSO-BP模型分别预测平缓天气与波动天气下的光伏出力。仿真结果表明:在平稳和波动两种不同天气情况下,该方法相较于传统预测方法精度更高。 展开更多
关键词 光伏预测 皮尔逊相关系数 余弦相似度 金枪鱼群优化算法 反向传播神经网络
下载PDF
汉语名词谓语句的三域一体研究
9
作者 魏宏泽 《长春大学学报》 2024年第5期67-74,共8页
作为名词非典型用法的名词谓语句是学界历来讨论的焦点话题之一。认知语法理论的名词概念涉及最大辖域、直接辖域和焦点,以此为基础搭建的三域一体分析框架(TSO),解析了名词谓语句双名词(NP1 NP2)主谓结构的三域关系,阐释了该类句式概... 作为名词非典型用法的名词谓语句是学界历来讨论的焦点话题之一。认知语法理论的名词概念涉及最大辖域、直接辖域和焦点,以此为基础搭建的三域一体分析框架(TSO),解析了名词谓语句双名词(NP1 NP2)主谓结构的三域关系,阐释了该类句式概念化过程的认知特征。研究发现,名词谓语句的主谓语表现为多种语义关系,在认知层面统一于辖域蕴含关系。限定性成分是谓语名词的关键参数,对焦点域范围的有无和大小起调变作用。 展开更多
关键词 名词谓语句 三域一体 有界性 有定性
下载PDF
基于KPCA-ITSO-ELM-Adaboost的变压器故障诊断方法 被引量:5
10
作者 傅晓锦 杨成 《国外电子测量技术》 北大核心 2022年第11期160-169,共10页
针对传统变压器故障诊断方法诊断精度低,单一智能诊断方法在实际模型中不能准确分类的问题,建立了一种改进金枪鱼算法(ITSO)优化加权极限学习机(ELM)的变压器故障诊断模型。首先,使用核主成分分析算法(KPCA)对变压器故障数据进行降维处... 针对传统变压器故障诊断方法诊断精度低,单一智能诊断方法在实际模型中不能准确分类的问题,建立了一种改进金枪鱼算法(ITSO)优化加权极限学习机(ELM)的变压器故障诊断模型。首先,使用核主成分分析算法(KPCA)对变压器故障数据进行降维处理,去除数据中的无用信息,提高模型的识别效率,然后,利用ITSO算法对ELM进行优化,建立ITSO-ELM变压器故障诊断模型,最后,使用Adaboost算法对ITSO-ELM模型进行增强。仿真实例表明,所提方法相比于与ELM-Adaboost、TSO-ELM、ITSO-ELM模型分别提高了11.6%、7.2%、4%,验证了所提模型的有效性。 展开更多
关键词 核主成分分析 金枪鱼算法 极限学习机 自适应增强算法 变压器 故障诊断
下载PDF
热像仪光机热集成分析综述 被引量:6
11
作者 马宏川 范宏波 +1 位作者 林宇 王磊 《红外技术》 CSCD 北大核心 2019年第2期134-141,共8页
光机热集成分析不仅能够对红外成像系统在复杂环境下像质进行评价,而且能够在设计阶段对热像仪模型进行优化设计,从而节省研发时间,提高研究效率。本文介绍了光机热集成分析的基本原理,对该领域近年出现的光机热集成方法进行归纳总结与... 光机热集成分析不仅能够对红外成像系统在复杂环境下像质进行评价,而且能够在设计阶段对热像仪模型进行优化设计,从而节省研发时间,提高研究效率。本文介绍了光机热集成分析的基本原理,对该领域近年出现的光机热集成方法进行归纳总结与分析对比,指出目前光机热集成分析存在的缺点与不足,重点介绍了折射率梯度和光学胶对热像仪像质的影响,并对热像仪集成分析发展趋势做出展望。 展开更多
关键词 光机热 梯度折射率 胶模拟
下载PDF
TSO及其引用标准的分析 被引量:5
12
作者 杨跃进 张奕 《航空标准化与质量》 1992年第6期30-34,共5页
对美国TSO及其引用标准的性质、主要技术内容、特点和作用作了全面系统的介绍与分析;结合国内生产实际,对我国现有技术力量与相关标准要求之间的差距进行了综合评价。指出我们应进一步研究分析TSO及其引用标准,借鉴国外经验,发展我国机... 对美国TSO及其引用标准的性质、主要技术内容、特点和作用作了全面系统的介绍与分析;结合国内生产实际,对我国现有技术力量与相关标准要求之间的差距进行了综合评价。指出我们应进一步研究分析TSO及其引用标准,借鉴国外经验,发展我国机载设备的适航性工作。 展开更多
关键词 引用标准 tso 机载设备 主要技术内容 综合评价 性能标准 环境试验 无线电高度表 技术标准体系 工业标准化
原文传递
民机机载设备适航批准方式及其选择 被引量:5
13
作者 吕海霞 《航空标准化与质量》 2009年第3期32-33,共2页
介绍了民机机载设备的适航批准方式,并且对机载设备适航取证方式的选择进行了分析。
关键词 tso PMA 随机批准
原文传递
抗张挺度取向角和抗张挺度指数对纸张尺寸稳定性的影响 被引量:2
14
作者 王海毅 王晖 +1 位作者 王冬生 张玉宝 《纸和造纸》 北大核心 2008年第1期61-64,共4页
介绍纸张TSO、TSI对尺寸稳定性能的影响,为造纸过程中纸张尺寸稳定性的改善提供依据。
关键词 TSI tso 纸张尺寸稳定性
下载PDF
压裂防泥砂工艺在蒙古林油田的研究与应用 被引量:2
15
作者 吴刚飞 白天增 +4 位作者 李红亚 顾广庆 高科策 陈立新 王文凯 《油气井测试》 2013年第2期57-58,78,共2页
根据蒙古林油田的出泥砂特点,分析了压裂防泥砂工艺的原理,认为端部脱砂技术是该工艺的关键点,并给出端部脱砂发生的时间、平均缝宽、压裂液效率,前置液用量等相应的计算公式,提出采用常规支撑剂压裂+树脂砂封口的压裂工艺技术,经过现... 根据蒙古林油田的出泥砂特点,分析了压裂防泥砂工艺的原理,认为端部脱砂技术是该工艺的关键点,并给出端部脱砂发生的时间、平均缝宽、压裂液效率,前置液用量等相应的计算公式,提出采用常规支撑剂压裂+树脂砂封口的压裂工艺技术,经过现场应用,取得了较好的效果,未出现停工检泵现象。 展开更多
关键词 压裂防砂 tso 蒙古林油田 树脂砂
下载PDF
Geochronology of the Dong Tso Ophiolite and the Tectonic Environment 被引量:2
16
作者 LI Jianfeng XIA Bin +4 位作者 XIA Lianze XU Lifeng LIU Weiliang CAI Zhourong YANG Zhiqing 《Acta Geologica Sinica(English Edition)》 SCIE CAS CSCD 2013年第6期1604-1616,共13页
The wedge shaped Dong Tso ophiolitic block is distributed near the transition point from the western to the middle sub-belt of the Bangong-Nujiang suture zone.The ophiolite is characterized by well-developed cumulate ... The wedge shaped Dong Tso ophiolitic block is distributed near the transition point from the western to the middle sub-belt of the Bangong-Nujiang suture zone.The ophiolite is characterized by well-developed cumulate rocks that are mainly composed of cumulate and massive gabbros.In the cumulate gabbros,the adcumulate amphiboles are distributed extensively around the plagioclase and residual pyroxene grains; hence,the rocks are named adcumulate amphibole-gabbro.In this study,the formation age of the ophiolite has been estimated to be 166 ± 4 million years (Ma) by the sensitive high-resolution ion microprobe (SHRIMP) Ⅱ U-Pb isotopic analysis of the zircons from the adcumulate amphibole-gabbro; the 40Ar/39Ar plateau age was estimated to be 148.19 ± 1.53 Ma,which should represent the emplacement time of the ophiolite,by isotopic dating of the pure amphibole mineral from the amphibole-schist.Two different suits of volcanic lavas have been recognized in this work.The purple colored pillow basalts have high TiO2 and P2O5 contents,and are rich in light rare earth elements (LREEs),large-ion lithospheric elements (LILEs) and high-field-strength elements (HFSEs),the characteristics that are the typical of the oceanic island basalt (OIB).On the other hand,other massive basaltic andesites of celadon color are poor in MgO; rich in Fe2O3,LREEs,LILEs,and HFSEs; and especially characterized by negative Nb and Ta anomalies,the properties that establish the andesites as continental arc volcanic rocks.It is concluded that hotspots had developed in the old Dong Tso basin,the oceanic basin that had been developing from middle Jurassic (166 Ma) or even before and emplaced northward in late Jurassic (about 148 Ma). 展开更多
关键词 OPHIOLITE SHRIMP U-Pb age 40Ar/39Ar age Tectonic evolution Dong tso
下载PDF
Comparative Assessment of the Fatty Acid Profiles of Crude Oils Extracted from Seeds of Selected Tea ( Camellia sinensis L.) Cultivars 被引量:2
17
作者 Kelvin Omondi George John K. Wanyoko +2 位作者 Thomas Kinyanjui Kelvin O. Moseti Francis N. Wachira 《Food and Nutrition Sciences》 2016年第1期1-7,共7页
Tea seeds resulting from the cultivation of tea in many parts of the world, often regarded as waste, have been found to contain oil of exceptional quality that can be harnessed for use as an oleo-chemical or chemical ... Tea seeds resulting from the cultivation of tea in many parts of the world, often regarded as waste, have been found to contain oil of exceptional quality that can be harnessed for use as an oleo-chemical or chemical intermediate. A comparative study was carried out to examine the free fatty acid profiles of crude oils chemically extracted by Soxhlet extraction from tea seeds collected from different cultivars of Kenyan tea. All the tea seeds of the studied tea cultivars yielded oil, though to different extents (p > 0.05) after the 8-hour extraction. The oils were golden yellow in color. The contents of oleic, linoleic and stearic acids in all the crude test oils have no significant difference (p > 0.05) from each other. However, statistically significant differences (p < 0.05) in the linolenic and palmitic acids contents were evident. Based on the current findings, the test tea oils were predominantly constituted of unsaturated fatty acids, oleic acid being the major unsaturated fatty acid, other fatty acids being present in different but smaller proportions. 展开更多
关键词 Soxhlet Extraction tso GC FAMEs Clonal Variations
下载PDF
浆网速变化对纸张物理性能的影响 被引量:4
18
作者 张方东 裴继诚 +2 位作者 李静 刘苇 周程熙 《中国造纸》 CAS 北大核心 2014年第6期25-30,共6页
采用动态纸张成形器在不同浆网速条件下抄造纸张,利用抗张挺度取向(TSO)测试仪对纸张的TSO性能参数进行测定,同时检测纸张的紧度、透气度和抗张强度等指标,考察浆网速变化对成纸纵横向物理性能的影响。结果表明,随着网速的增加,纸张的... 采用动态纸张成形器在不同浆网速条件下抄造纸张,利用抗张挺度取向(TSO)测试仪对纸张的TSO性能参数进行测定,同时检测纸张的紧度、透气度和抗张强度等指标,考察浆网速变化对成纸纵横向物理性能的影响。结果表明,随着网速的增加,纸张的纵向抗张挺度指数(TSIMD)和纵横向抗张挺度指数比(TSIMD/CD)增大,横向抗张挺度指数(TSICD)减小;浆速提高的情况下TSI变化规律与网速增加时相反;抗张强度变化趋势与TSI变化趋势相一致。随着网速的增加,纸张的紧度增大,透气度降低;改变浆速,纸张紧度和透气度变化规律不明显。纸张的匀度随着浆网速差的增加而提高。 展开更多
关键词 动态纸张成形 抗张挺度取向 物理性能
下载PDF
《左传》叙事研究综述
19
作者 张懿奕 《湘南学院学报》 2010年第4期73-78,共6页
综合20世纪50年代至今,各个历史时期中的学术语境和叙事学理论的发展状况,从文体、情节、人物三个方面对《左传》叙事研究文章进行归纳,揭示出《左传》叙事研究的思路和成果。
关键词 《左传》 叙事研究 tso 叙事学理论 学术语境 历史时期 发展状况 综合 文章 文体 思路 世纪 人物 情节 归纳 成果
下载PDF
超声波TSO仪测量技术的在线应用 被引量:1
20
作者 韩丽丽 王海毅 《造纸科学与技术》 2008年第5期32-34,共3页
超声波实时在线测量技术作为优化造纸过程、改善纸品质量使之更符合消费者要求的一种测量方法,已经得到了广泛的认同,并迅速的发展起来。本文主要描述了纸机生产过程中测量纸产品强度和弹性性能的新方法超声波TSO测量仪,及其在线实时测... 超声波实时在线测量技术作为优化造纸过程、改善纸品质量使之更符合消费者要求的一种测量方法,已经得到了广泛的认同,并迅速的发展起来。本文主要描述了纸机生产过程中测量纸产品强度和弹性性能的新方法超声波TSO测量仪,及其在线实时测量的信号处理技术、设备组成以及在工厂的实践应用等。 展开更多
关键词 超声波 tso 弹性性能 在线测量
下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部