An economic and effective method of preparing enriched 10B boric acid was established by chemical reactionof enriched 10BF3 and CaCO3. A process of boron trifluoride reacting with water was investigated under certainc...An economic and effective method of preparing enriched 10B boric acid was established by chemical reactionof enriched 10BF3 and CaCO3. A process of boron trifluoride reacting with water was investigated under certainconditions. Calcium carbonate was selected to counteract hydrofluoric acid followed on. Some key operation factorswere investigated, such as temperature, reaction time and the ratio of CaCO3 to 10BF3. The results showed that the yieldof enriched 10B boric acid could reach 97. 2% and the purity was up to 94. 1% under the following conditions： the temperaturewas 50-60,℃, the reaction time was 28 h and the ratio of CaCO3 to 10BF3 was 4. In addition, after recrystallizationand titration analysis, the purity of the product could reach over 99. 2% from 94.1%.展开更多
Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol ...Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol system. Gas chromatography–mass spectrometry, proton nuclear magnetic resonance and ^(13) C nuclear magnetic resonance analysis confirmed dimer, trimer and tetramer structures of PAO. Each component contained branched chains with a 1,2 insertion of a head-to-tail link; a 2,1 insertion of a tail-to-tail link and a methyl-containing linked structure. At a low conversion rate, the reaction rate was related directly with the reaction temperature and the catalyst/1-decene concentration. An apparent kinetic equation for PAO formation was determined during 1-decene polymerization.展开更多
The commercial hydroxyl group terminated polytetramethylene glycol （PTMG）is prepared by the cationic ring-opening polymerization of tetrahydrofuran （THF）by using a strong protonic acid initiator system such as fum...The commercial hydroxyl group terminated polytetramethylene glycol （PTMG）is prepared by the cationic ring-opening polymerization of tetrahydrofuran （THF）by using a strong protonic acid initiator system such as fuming sulfuric acid and others. There has been considerable interest in the low-corrosive BF<sub>3</sub> initiator system. However, the展开更多
The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of ap...The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of applied polymerization potential and the monomer concentration ratios on the copolymerization were investigated by linear sweep voltammetry and cyclic voltammetry(CV).The structure of copolymer films were investigated by UV-Vis,infrared spectroscopy,thermal analysis.As-formed novel copolymers own...展开更多
Because of the superior features of boron-10 isotope in absorbing hot neutrons, boric-10 acid(H310BO3)has been used widely in nuclear industry. Boric-10 acid is obtained from boron-10 trifluoride(10BF3) by esterificat...Because of the superior features of boron-10 isotope in absorbing hot neutrons, boric-10 acid(H310BO3)has been used widely in nuclear industry. Boric-10 acid is obtained from boron-10 trifluoride(10BF3) by esterification and hydrolyzation. In this study, trimethyl borate-10 [(CH3O)310B] was prepared from boron-10 trifluoride(10BF3)through chemical exchange rectification. In addition, the hydrolyzation of trimethyl borate-10 was investigated with different p H values, temperatures and molar ratios of water to trimethyl borate-10. Under the optimum process conditions, high yield of boric-10 acid with nuclear industrial purity grade was realized.展开更多
The synthesis of bis(oxazoline) dicarboxylate derivatives was investigated. Diethyl-aminosulfur trifluoride (DAST) was used as a convenient cyclization reagent in the synthesis of bis(oxazoline) dicarboxylate derivati...The synthesis of bis(oxazoline) dicarboxylate derivatives was investigated. Diethyl-aminosulfur trifluoride (DAST) was used as a convenient cyclization reagent in the synthesis of bis(oxazoline) dicarboxylate derivatives, which can not be obtained by the general method using MsCl and Et3N as dehydrating cyclization reagent.展开更多
High quality poly（5-cyanoindole） （P5CI） films were electrosynthesized by direct anodic oxidation of 5-cyanoindole on stainless steel sheet in the mixed electrolytes of boron trifluoride diethyl etherate （BFEE） a...High quality poly（5-cyanoindole） （P5CI） films were electrosynthesized by direct anodic oxidation of 5-cyanoindole on stainless steel sheet in the mixed electrolytes of boron trifluoride diethyl etherate （BFEE） and diethyl ether （EE） （by volume 1：1） ＋ 0,05 mol L^-1 Bu4NBF4. The film formed can be peeled off the electrode into freestanding films, The addition of EE into BFEE can improve the solubility of monomer. P5CI films obtained from this medium showed excellent electrochemical behavior with conductivity of 10^-2 S cm^-1, Structural studies showed that the polymerization of 5-cyanoindole occurred at the 2,3 position. As-formed P5CI films were thoroughly soluble in strong polar organic solvent dimethyl sulfoxide （DMSO） while partly soluble in tetrahydrofuran （THF） or acetone. Fluorescence spectral studies indicated that P5CI was a good blue-ight emitter.展开更多
Fatty acid methyl ester (FAME) preparation is an important step to determine fatty acid composition of oils and fats. Transesterification with boron trifluoride (BF3) in methanol has been widely used;however, the tran...Fatty acid methyl ester (FAME) preparation is an important step to determine fatty acid composition of oils and fats. Transesterification with boron trifluoride (BF3) in methanol has been widely used;however, the transesterification of triacylglycerols usually involves a long heating time, whereas much shorter reaction times may be sufficient when microwave irradiation is used. The purpose of this paper was to optimize FAME preparation with BF3 by microwave irradiation. A three-factor central composite routable (CCRD) design was used to study the effect of the heating time (A), irradiation power (B), and volume of sodium hydroxide (C) on FAME concentration. A second-order polynomial model was employed to generate a surface response. Optimum conditions obtained for FAME preparation were time of 60 s, irradiation power of 220 W, and base volume of 1.5 mL. Compared to conventional methods, the advantages of this method are the quick result and the accuracy.展开更多
In order to clarify the equilibrium components in the hydrolysis solution of boron trifluoride(BF_3-H_2O),the BF_3-H_2O was prepared by mixing BF_3-CH_3OH with large amount of water,in which the stoichiometric concent...In order to clarify the equilibrium components in the hydrolysis solution of boron trifluoride(BF_3-H_2O),the BF_3-H_2O was prepared by mixing BF_3-CH_3OH with large amount of water,in which the stoichiometric concentration of BF_3 is less than 0.1 mol/L.Two ionic equilibrium models were proposed to simulate the hydrolysis equilibrium of BF_3 and tested by special acid-base titration technique.The most accurate ion equilibrium constants were determined.The model,which was assumed to have no HF,was proved to be more representative for the real system and used to simulate the hydrolysis equilibrium of BF_3.The simulation suggested that H^+,BF_4^-,BF_3OH^- and H_3BO_3 were the main species in the dilute hydrolysis solution,while BF_2(OH)_2^- and F^- were insignificant species whose concentrations were both in the order of 10^(-4) mol/L magnitude,and BF(OH)_3^- could be omitted because its concentration almost equaled zero.Meanwhile,the equilibrium constant of the overall ionic reaction at 25℃ was obtained as 161.6.展开更多
The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in ...The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in boron trifluoride diethyl etherate （BFEE） and its mixed electrolytes with acetonitrile （ACN）. The influence of monomer concentration ratios on the copolymerization was investigated by using linear sweep voltammetry and cyclic voltammetry. The structure and morphology of these copolymer films were elucidated by UV-Vis, infrared spectroscopy, elemental analysis, thermal analysis and scanning electron microscopy （SEM）, respectively. The results showed that the molar ratio of FPT and MeT units, when copolymer was electrodeposited from feed ratio of FPT：MeT = 1：2, was about 1.08：1. In addition, the introduction of ACN into BFEE has little effect on the properties of as-formed copolymers.展开更多
The BF3/n-BuOH complexes were investigated as active species in catalyzing n-decene polymerization reaction.The structures of BF3/n-BuOH complexes were characterized not only by modern spectrum but also by calculation...The BF3/n-BuOH complexes were investigated as active species in catalyzing n-decene polymerization reaction.The structures of BF3/n-BuOH complexes were characterized not only by modern spectrum but also by calculation at theoretical level. The results confirmed that BF3/n-BuOH complexes changed from BF3·(n-BuOH)2 complexes to BF3·n-BuOH complexes with the mass fraction of BF3 increasing. These two complexes have different catalytic activity, but BF3·n-BuOH was superior. The highest n-decene conversion could reach 99% and the most excellent selectivity of n-decene trimer and tetramer could reach up to 80% yield by a series of controlled conditions. This work can help to understand the catalytic active species of n-decene polymerization and provide support for industrialization of poly-alpha-olefins(PAOs).展开更多
CeF3. CaF2, (CF)n, SbF3, and CeO2 were selected as the high temperature solid additives in a lithium grease, and their friction, wear, and extreme pressure properties were evaluated on an Optimol-SRV wear tester. The ...CeF3. CaF2, (CF)n, SbF3, and CeO2 were selected as the high temperature solid additives in a lithium grease, and their friction, wear, and extreme pressure properties were evaluated on an Optimol-SRV wear tester. The effect of additive on the fiber structure of soap was studied by means of the transmission electron microscopy(TEM). The corrosive property of grease containing additive was evaluated by copper strip corrosion test. Thermal decomposition behaviors of the additives were studied by thermogravimetry(TG) tester. The adhesive strength of rubbing surface film was measured by automatic scratch tester and the wear surface was detected by means of X-ray photoelectron spectroscopy (XPS). The test results showed that the grease containing CeF3 has good anti-wear, anti-friction, and EP performances, and has high adhesive strength of rubbing surface film.The greases containing CaF2 or (CF)n are good in antiwear and anti-friction properties, but poor in extreme pressure function. The tribological properties of the grease containing SbF3 are decreased.And the addition of CeO2 in grease was useless. Finally the mechanism of fluoride additive was proposed in this paper.展开更多
The low power arc plasma is characterized by extremely high enthalpy and temper- ature and it is easy to generate and control, and thus thermal decomposition process based on the plasma torch is receiving a great atte...The low power arc plasma is characterized by extremely high enthalpy and temper- ature and it is easy to generate and control, and thus thermal decomposition process based on the plasma torch is receiving a great attention for decomposing non-degradable greenhouse gases. In order to elevate the economic feasibility, the effects of input power, waste gas flow rate and additive gases on the destruction and removal efficiency （DRE） of NF3 are examined. Specific energy density （SED） deceases as the flow rate increases, and accordingly, the DRE is reduced. The DRE is basically determined by the specific energy density. The highest DRE of NF3 was 97% for the waste gas flow rate of 100 L/min at a low input power level of 2 kW with the help of hydrogen additional gas. The inlet and outlet concentration of NF3 was analyzed using Fourier transform infrared spectroscopy （FT-IR） for DRE of NF3 evaluation. As a result, large amount of NF3 can be efficiently decomposed by low power arc plasma systems.展开更多
An annealing process was developed for the practical recover of a purified py-rolytic carbon (PPyC) surface from damage, such as color change and peeling, due to fluorination during exposure to chlorine trifluoride ga...An annealing process was developed for the practical recover of a purified py-rolytic carbon (PPyC) surface from damage, such as color change and peeling, due to fluorination during exposure to chlorine trifluoride gas at high tempera-tures for the cleaning of a silicon carbide chemical vapor deposition reactor. The PPyC surface was annealed at 900</span><span style="color:#4F4F4F;font-family:Verdana;">°</span><span style="font-family:Verdana;"></span><span style="font-family:Verdana;">C for 10 min in ambient nitrogen con-taining oxygen at the concentrations of 0.01% - 20%. The rainbow-like colored surface returned to the dark gray color of the original PPyC. Simultaneously, the thin peeled films disappeared. The Raman spectra showed that the PPyC surface chemical bonding returned to that of the original one. The oxygen concentration as low as 0.01% could recover the PPyC surface along with re-ducing the surface pit formation, when the combination of the exposure to chlorine trifluoride gas and the recovery was repeated.展开更多
?-Phenyl－4－aroylfuran－3－carboxylic acids were reduced in aqueous alkaline solutions ofNaBH4 to afford hydroxy acids in excellent yields． Under the catalysis of boron trifluoride etherate，the hydroxy acids were c...?-Phenyl－4－aroylfuran－3－carboxylic acids were reduced in aqueous alkaline solutions ofNaBH4 to afford hydroxy acids in excellent yields． Under the catalysis of boron trifluoride etherate，the hydroxy acids were converted to lactones smoothly．展开更多
For developing coating materials, the fluorides of scandium, lanthanum, strontium, barium, magnesium and aluminum were produced from their oxides and chlorides by means of exposure to chlorine trifluoride gas at tempe...For developing coating materials, the fluorides of scandium, lanthanum, strontium, barium, magnesium and aluminum were produced from their oxides and chlorides by means of exposure to chlorine trifluoride gas at temperatures between room temperature and 700°C. The metal chlorides could be easily fluorinated even at room temperature, while the metal oxides required temperatures higher than 300?C. After the heating in ambient hydrogen at 1100°C, the fluorides of lanthanum and barium showed very low weight losses at 1100°C, although the weights of the other fluorides significantly decreased. These materials may work as protective films against corrosive and high temperature environments, particularly when using the chlorine trifluoride gas.展开更多
Synthesis and electrochemical polymerization of 9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene （EO-F） into poly[9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene] （EO-PF） films are reported....Synthesis and electrochemical polymerization of 9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene （EO-F） into poly[9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene] （EO-PF） films are reported. The boron trifluoride diethyl etherate electrolyte enables facile preparation of EO-PF films at lower potential compared to LiCIOa/MeCN and the electrochemical polymerizations are discussed. The EO-PF shows good electrochemical behavior and can be dissolved in solvents such as DMSO and THF. The solubility of EO-PF in THF is 2 mg.mL-1 and the number average molecular weight is 35300 with a polydispersity index of 1.65. The side chains on C9 position of the monomer maintain unchanged aRer electrooxidation into corresponding polymer. The EO-PF dissolved in THF under 365 nm ultraviolet light is sky blue light emitting with the Commission Internationale de L＇Eclairage-CIE coordinates of （0.19, 0.15）. The electropolymerized EO-PF is used for the first time in chemosensing metal ions, demonstrating fluorescence quenching for Mn2＋ and Fe3＋ while fluorescence enhancement for Cr6＋ ions.展开更多
Novel conducting oligocatecholborane （OCOB） with electrical conductivity of 3.73 × 10^-2 S cm-1 was successfully synthesized by low-potential electropolymerization of catecholborane （COB） in boron trifluoride...Novel conducting oligocatecholborane （OCOB） with electrical conductivity of 3.73 × 10^-2 S cm-1 was successfully synthesized by low-potential electropolymerization of catecholborane （COB） in boron trifluoride diethyl etherate at 0.70 V versus Ag/AgC1. FT-IR and ^1H-NMR spectra, together with the computational results, proved that COB was polymerized through the coupling at C（4） and C（5} positions and the reactive B- H bond was stable during the electrochemical polymerization. The resulting product was mainly composed of oligomers with short chain lengths by GPC and mass spectral results. The as-formed OCOB film showed good electrochemistry in monomer-free electrolytes with the electrochromic property from opaque blue to sap green. Fluorescence studies indicated that soluble OCOB can emit bright blue light under excitation of 365 nm UV light with the maximum emission at 396 nm and a fluorescence quantum yield of 0.21. The deposited OCOB also exhibited favorable thermal stability and smooth and compact morphology even at high magnifications.展开更多
Efficient and easily reproducible synthesis of sterically hindered multibrominated corroles is achieved via dipyrromethane-aldehyde condensation reaction in good yields.Boron trifluoride dietherate（BF_3-Et_2O） is fo...Efficient and easily reproducible synthesis of sterically hindered multibrominated corroles is achieved via dipyrromethane-aldehyde condensation reaction in good yields.Boron trifluoride dietherate（BF_3-Et_2O） is found to be the effective catalyst for cyclization reaction,giving corrole as the major product.展开更多
基金Supported by the Independent Innovation Fund of Tianjin University(No.1307)
文摘An economic and effective method of preparing enriched 10B boric acid was established by chemical reactionof enriched 10BF3 and CaCO3. A process of boron trifluoride reacting with water was investigated under certainconditions. Calcium carbonate was selected to counteract hydrofluoric acid followed on. Some key operation factorswere investigated, such as temperature, reaction time and the ratio of CaCO3 to 10BF3. The results showed that the yieldof enriched 10B boric acid could reach 97. 2% and the purity was up to 94. 1% under the following conditions： the temperaturewas 50-60,℃, the reaction time was 28 h and the ratio of CaCO3 to 10BF3 was 4. In addition, after recrystallizationand titration analysis, the purity of the product could reach over 99. 2% from 94.1%.
基金supported by the Natural Science Foundation of China(21576048)the PetroChina Innovation Foundation(2014D-5006-0503)
文摘Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol system. Gas chromatography–mass spectrometry, proton nuclear magnetic resonance and ^(13) C nuclear magnetic resonance analysis confirmed dimer, trimer and tetramer structures of PAO. Each component contained branched chains with a 1,2 insertion of a head-to-tail link; a 2,1 insertion of a tail-to-tail link and a methyl-containing linked structure. At a low conversion rate, the reaction rate was related directly with the reaction temperature and the catalyst/1-decene concentration. An apparent kinetic equation for PAO formation was determined during 1-decene polymerization.
文摘The commercial hydroxyl group terminated polytetramethylene glycol （PTMG）is prepared by the cationic ring-opening polymerization of tetrahydrofuran （THF）by using a strong protonic acid initiator system such as fuming sulfuric acid and others. There has been considerable interest in the low-corrosive BF<sub>3</sub> initiator system. However, the
基金This work was financially supported by the Natural Science Foundation of China(Nos.50663001,20564001)Ministry of Education(No.2007-207058).
文摘The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of applied polymerization potential and the monomer concentration ratios on the copolymerization were investigated by linear sweep voltammetry and cyclic voltammetry(CV).The structure of copolymer films were investigated by UV-Vis,infrared spectroscopy,thermal analysis.As-formed novel copolymers own...
基金Supported by the Independent Innovation Fund of Tianjin University(No.1307)
文摘Because of the superior features of boron-10 isotope in absorbing hot neutrons, boric-10 acid(H310BO3)has been used widely in nuclear industry. Boric-10 acid is obtained from boron-10 trifluoride(10BF3) by esterification and hydrolyzation. In this study, trimethyl borate-10 [(CH3O)310B] was prepared from boron-10 trifluoride(10BF3)through chemical exchange rectification. In addition, the hydrolyzation of trimethyl borate-10 was investigated with different p H values, temperatures and molar ratios of water to trimethyl borate-10. Under the optimum process conditions, high yield of boric-10 acid with nuclear industrial purity grade was realized.
文摘The synthesis of bis(oxazoline) dicarboxylate derivatives was investigated. Diethyl-aminosulfur trifluoride (DAST) was used as a convenient cyclization reagent in the synthesis of bis(oxazoline) dicarboxylate derivatives, which can not be obtained by the general method using MsCl and Et3N as dehydrating cyclization reagent.
基金This work was supported by the Jiangxi Research Center for Material Science & Engineering(No.ZX200401008)the Jiangxi Science and Technology Normal University.
文摘High quality poly（5-cyanoindole） （P5CI） films were electrosynthesized by direct anodic oxidation of 5-cyanoindole on stainless steel sheet in the mixed electrolytes of boron trifluoride diethyl etherate （BFEE） and diethyl ether （EE） （by volume 1：1） ＋ 0,05 mol L^-1 Bu4NBF4. The film formed can be peeled off the electrode into freestanding films, The addition of EE into BFEE can improve the solubility of monomer. P5CI films obtained from this medium showed excellent electrochemical behavior with conductivity of 10^-2 S cm^-1, Structural studies showed that the polymerization of 5-cyanoindole occurred at the 2,3 position. As-formed P5CI films were thoroughly soluble in strong polar organic solvent dimethyl sulfoxide （DMSO） while partly soluble in tetrahydrofuran （THF） or acetone. Fluorescence spectral studies indicated that P5CI was a good blue-ight emitter.
文摘Fatty acid methyl ester (FAME) preparation is an important step to determine fatty acid composition of oils and fats. Transesterification with boron trifluoride (BF3) in methanol has been widely used;however, the transesterification of triacylglycerols usually involves a long heating time, whereas much shorter reaction times may be sufficient when microwave irradiation is used. The purpose of this paper was to optimize FAME preparation with BF3 by microwave irradiation. A three-factor central composite routable (CCRD) design was used to study the effect of the heating time (A), irradiation power (B), and volume of sodium hydroxide (C) on FAME concentration. A second-order polynomial model was employed to generate a surface response. Optimum conditions obtained for FAME preparation were time of 60 s, irradiation power of 220 W, and base volume of 1.5 mL. Compared to conventional methods, the advantages of this method are the quick result and the accuracy.
基金Supported by the Independent Innovation Fund of Tianjin University(No.1307)
文摘In order to clarify the equilibrium components in the hydrolysis solution of boron trifluoride(BF_3-H_2O),the BF_3-H_2O was prepared by mixing BF_3-CH_3OH with large amount of water,in which the stoichiometric concentration of BF_3 is less than 0.1 mol/L.Two ionic equilibrium models were proposed to simulate the hydrolysis equilibrium of BF_3 and tested by special acid-base titration technique.The most accurate ion equilibrium constants were determined.The model,which was assumed to have no HF,was proved to be more representative for the real system and used to simulate the hydrolysis equilibrium of BF_3.The simulation suggested that H^+,BF_4^-,BF_3OH^- and H_3BO_3 were the main species in the dilute hydrolysis solution,while BF_2(OH)_2^- and F^- were insignificant species whose concentrations were both in the order of 10^(-4) mol/L magnitude,and BF(OH)_3^- could be omitted because its concentration almost equaled zero.Meanwhile,the equilibrium constant of the overall ionic reaction at 25℃ was obtained as 161.6.
基金This work was financially supported by the National Natural Science Foundation of China (No. 20564001)the Natural Science Foundation of Jiangxi Province (No. 050017)
文摘The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in boron trifluoride diethyl etherate （BFEE） and its mixed electrolytes with acetonitrile （ACN）. The influence of monomer concentration ratios on the copolymerization was investigated by using linear sweep voltammetry and cyclic voltammetry. The structure and morphology of these copolymer films were elucidated by UV-Vis, infrared spectroscopy, elemental analysis, thermal analysis and scanning electron microscopy （SEM）, respectively. The results showed that the molar ratio of FPT and MeT units, when copolymer was electrodeposited from feed ratio of FPT：MeT = 1：2, was about 1.08：1. In addition, the introduction of ACN into BFEE has little effect on the properties of as-formed copolymers.
基金Support by National Key Research and Development Program of China(2017YFB0306701)State Key Laboratory Opening Project Foundation of Jilin University(2018-16).
文摘The BF3/n-BuOH complexes were investigated as active species in catalyzing n-decene polymerization reaction.The structures of BF3/n-BuOH complexes were characterized not only by modern spectrum but also by calculation at theoretical level. The results confirmed that BF3/n-BuOH complexes changed from BF3·(n-BuOH)2 complexes to BF3·n-BuOH complexes with the mass fraction of BF3 increasing. These two complexes have different catalytic activity, but BF3·n-BuOH was superior. The highest n-decene conversion could reach 99% and the most excellent selectivity of n-decene trimer and tetramer could reach up to 80% yield by a series of controlled conditions. This work can help to understand the catalytic active species of n-decene polymerization and provide support for industrialization of poly-alpha-olefins(PAOs).
文摘CeF3. CaF2, (CF)n, SbF3, and CeO2 were selected as the high temperature solid additives in a lithium grease, and their friction, wear, and extreme pressure properties were evaluated on an Optimol-SRV wear tester. The effect of additive on the fiber structure of soap was studied by means of the transmission electron microscopy(TEM). The corrosive property of grease containing additive was evaluated by copper strip corrosion test. Thermal decomposition behaviors of the additives were studied by thermogravimetry(TG) tester. The adhesive strength of rubbing surface film was measured by automatic scratch tester and the wear surface was detected by means of X-ray photoelectron spectroscopy (XPS). The test results showed that the grease containing CeF3 has good anti-wear, anti-friction, and EP performances, and has high adhesive strength of rubbing surface film.The greases containing CaF2 or (CF)n are good in antiwear and anti-friction properties, but poor in extreme pressure function. The tribological properties of the grease containing SbF3 are decreased.And the addition of CeO2 in grease was useless. Finally the mechanism of fluoride additive was proposed in this paper.
基金supported by the Regional Innovation Center for Environmental Technology of ThermalPlasma(ETTP)at Inha University designated by MKE(2012)with funding received from the KORANET JointCall on Green Technologies
文摘The low power arc plasma is characterized by extremely high enthalpy and temper- ature and it is easy to generate and control, and thus thermal decomposition process based on the plasma torch is receiving a great attention for decomposing non-degradable greenhouse gases. In order to elevate the economic feasibility, the effects of input power, waste gas flow rate and additive gases on the destruction and removal efficiency （DRE） of NF3 are examined. Specific energy density （SED） deceases as the flow rate increases, and accordingly, the DRE is reduced. The DRE is basically determined by the specific energy density. The highest DRE of NF3 was 97% for the waste gas flow rate of 100 L/min at a low input power level of 2 kW with the help of hydrogen additional gas. The inlet and outlet concentration of NF3 was analyzed using Fourier transform infrared spectroscopy （FT-IR） for DRE of NF3 evaluation. As a result, large amount of NF3 can be efficiently decomposed by low power arc plasma systems.
文摘An annealing process was developed for the practical recover of a purified py-rolytic carbon (PPyC) surface from damage, such as color change and peeling, due to fluorination during exposure to chlorine trifluoride gas at high tempera-tures for the cleaning of a silicon carbide chemical vapor deposition reactor. The PPyC surface was annealed at 900</span><span style="color:#4F4F4F;font-family:Verdana;">°</span><span style="font-family:Verdana;"></span><span style="font-family:Verdana;">C for 10 min in ambient nitrogen con-taining oxygen at the concentrations of 0.01% - 20%. The rainbow-like colored surface returned to the dark gray color of the original PPyC. Simultaneously, the thin peeled films disappeared. The Raman spectra showed that the PPyC surface chemical bonding returned to that of the original one. The oxygen concentration as low as 0.01% could recover the PPyC surface along with re-ducing the surface pit formation, when the combination of the exposure to chlorine trifluoride gas and the recovery was repeated.
文摘?-Phenyl－4－aroylfuran－3－carboxylic acids were reduced in aqueous alkaline solutions ofNaBH4 to afford hydroxy acids in excellent yields． Under the catalysis of boron trifluoride etherate，the hydroxy acids were converted to lactones smoothly．
文摘For developing coating materials, the fluorides of scandium, lanthanum, strontium, barium, magnesium and aluminum were produced from their oxides and chlorides by means of exposure to chlorine trifluoride gas at temperatures between room temperature and 700°C. The metal chlorides could be easily fluorinated even at room temperature, while the metal oxides required temperatures higher than 300?C. After the heating in ambient hydrogen at 1100°C, the fluorides of lanthanum and barium showed very low weight losses at 1100°C, although the weights of the other fluorides significantly decreased. These materials may work as protective films against corrosive and high temperature environments, particularly when using the chlorine trifluoride gas.
基金financially supported by the National Natural Science Foundation of China(Nos.50903078,21274134)New Century Excellent Talents in Universities(No.NCET-11-0473)
文摘Synthesis and electrochemical polymerization of 9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene （EO-F） into poly[9,9-bis（2-（2-（2-methoxy ethoxy）ethoxy）ethyl）-fluorene] （EO-PF） films are reported. The boron trifluoride diethyl etherate electrolyte enables facile preparation of EO-PF films at lower potential compared to LiCIOa/MeCN and the electrochemical polymerizations are discussed. The EO-PF shows good electrochemical behavior and can be dissolved in solvents such as DMSO and THF. The solubility of EO-PF in THF is 2 mg.mL-1 and the number average molecular weight is 35300 with a polydispersity index of 1.65. The side chains on C9 position of the monomer maintain unchanged aRer electrooxidation into corresponding polymer. The EO-PF dissolved in THF under 365 nm ultraviolet light is sky blue light emitting with the Commission Internationale de L＇Eclairage-CIE coordinates of （0.19, 0.15）. The electropolymerized EO-PF is used for the first time in chemosensing metal ions, demonstrating fluorescence quenching for Mn2＋ and Fe3＋ while fluorescence enhancement for Cr6＋ ions.
基金supported by the National Natural Science Foundation of China (Nos. 50963002 and 51073074)Jiangxi Provincial Department of Education (Nos. GJJ11590, GJJ10678 and GJJ12595)+1 种基金the Natural Science Foundation of Jiangxi Province (No. 2010GZH0041)Jiangxi Science & Technology Normal University (No. KY2010ZY13)
文摘Novel conducting oligocatecholborane （OCOB） with electrical conductivity of 3.73 × 10^-2 S cm-1 was successfully synthesized by low-potential electropolymerization of catecholborane （COB） in boron trifluoride diethyl etherate at 0.70 V versus Ag/AgC1. FT-IR and ^1H-NMR spectra, together with the computational results, proved that COB was polymerized through the coupling at C（4） and C（5} positions and the reactive B- H bond was stable during the electrochemical polymerization. The resulting product was mainly composed of oligomers with short chain lengths by GPC and mass spectral results. The as-formed OCOB film showed good electrochemistry in monomer-free electrolytes with the electrochromic property from opaque blue to sap green. Fluorescence studies indicated that soluble OCOB can emit bright blue light under excitation of 365 nm UV light with the maximum emission at 396 nm and a fluorescence quantum yield of 0.21. The deposited OCOB also exhibited favorable thermal stability and smooth and compact morphology even at high magnifications.
基金support from National Natural Science Foundation of China(Nos.21171057 and 21371059)
文摘Efficient and easily reproducible synthesis of sterically hindered multibrominated corroles is achieved via dipyrromethane-aldehyde condensation reaction in good yields.Boron trifluoride dietherate（BF_3-Et_2O） is found to be the effective catalyst for cyclization reaction,giving corrole as the major product.
