The effects of Si addition on microstructures, mechanical and shape memory properties of Ti-55Ta biomedical alloy were investigated. The results show that the microstructures consist of mainly α′′ martensite and a ...The effects of Si addition on microstructures, mechanical and shape memory properties of Ti-55Ta biomedical alloy were investigated. The results show that the microstructures consist of mainly α′′ martensite and a little β phase, and the grain size decreases obviously with increasing Si addition. When x = 0.2, small （Ti, Ta）3Si precipitates are formed at grain boundaries. With further increasing Si content, the amount of the precipitates gradually increases. The tensile and yield strength of Ti-55Ta-xSi alloys gradually increase with increasing Si addition, whereas elongation decreases. Ti-55Ta-0.1Si alloy exhibits the lowest elastic modulus and the best shape memory recoverable strain. It is revealed that the refinement of grain and the precipitation of （Ti, Ta）3Si phase are responsible to the changes of their mechanical and shape memory properties.展开更多
In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The single...In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The singleα"martensite phase was dominated in Ti-Ta alloy with 2 at.%H f.Upon Hf content exceeded2 at.%,βphase started to appear.Moreover,the amount ofβphase gradually increased with Hf content increasing.The martensitic transformation temperatures continuously decreased with the increased Hf content,which was attributed to the rising of valence electron concentration.Meanwhile,Hf addition improved the thermal cycling stability of Ti-Ta alloys due to the suppression ofωprecipitation.The yield stress of Ti-Ta based alloys firstly decreased and then increased with Hf content increasing.In addition,the completely recoverable strain of 4%can be obtained in Ti-Ta alloy with 6 at.%Hf as a consequence of the higher critical stress for dislocation slip.Besieds,the Ti-Ta based alloy containing 8 at.%Hf had the superior superelasticity behavior with the fully recoverable strain of 2%at room temperature.展开更多
Corrosion behaviour of the studied Ti12Mo and Ti60Ta alloys with the same Mo equivalent values （12%, mass fraction） together with the currently used metallic biomaterials Cp-Ti were investigated for dental applicati...Corrosion behaviour of the studied Ti12Mo and Ti60Ta alloys with the same Mo equivalent values （12%, mass fraction） together with the currently used metallic biomaterials Cp-Ti were investigated for dental applications. The electrochemical properties of the samples were examined using electrochemical techniques： such as open-circuit potential, potentiodynamic polarization curves and electrochemical impedance spectroscopy （EIS）, in two electrochemical media of artificial saliva and fluoridated artificial saliva （0.1%fluoride ions, F-） at 37 °C. Fluoride is commonly included in toothpastes, odontological gels and dental rinses to prevent dental caries and relieve dental sensitivity. The passive behaviour for all the titanium samples is observed for both solutions. The Ti60Ta alloy appears to possess superior corrosion resistance than the Ti12Mo and Cp-Ti in both electrochemical media.展开更多
In order to evaluate the interfacial reaction, a SiCf/Ti (TA1) composite was fabricated by a vacuum hot pressing method and then heat-treated in vacuum at 800℃ for up to 100 h. The elemental distributions of C, Si an...In order to evaluate the interfacial reaction, a SiCf/Ti (TA1) composite was fabricated by a vacuum hot pressing method and then heat-treated in vacuum at 800℃ for up to 100 h. The elemental distributions of C, Si and Ti at the interfacial reaction zone were investigated. It was found that the reaction zone occurs during the fabrication process and continuously grows at high temperature because the Si and C atoms diffuse from SiC fibers to the matrix and Ti atoms diffuse in the opposite direction. The growth of the reaction zone is diffusion controlled and the mechanism of the reaction can be described by a reactive diffusion model of solid-state growth of an AmBn layer between two elementary substances A and B.展开更多
In the present study,the thermal,mechanical,and biological properties of xAg/Ti-30Ta(x=0,0.41,0.82 and 2.48 at%)shape memory alloys(SMAs)were investigated.The study was conducted using optical and scanning electron mi...In the present study,the thermal,mechanical,and biological properties of xAg/Ti-30Ta(x=0,0.41,0.82 and 2.48 at%)shape memory alloys(SMAs)were investigated.The study was conducted using optical and scanning electron microscopy(SEM),X-ray diffractometry(XRD),compression test,and shape memory testing.The xAg/Ti-Ta was made using a powder metallurgy technique and microwave-sintering process.The results revealed that the addition of Ag has a significant effect on the pore size and shape,whereas the smallest pore size of 11μm was found with the addition of 0.41 at%along with a relative density of 72%.The fracture stress and strain increased with the addition of Ag,reaching the minimum values around 0.41 at%Ag.Therefore,this composition showed the maximum stress and strain at fracture region.Moreover,0.82 Ag/Ti-Ta shows more excellent corrosion resistance and biocompatibility than other percentages,obtaining almost the same behaviour of the pure Ti and Ti-6Al-4V alloys,which can be recommended for their promising and potential response for biomaterial applications.展开更多
The mechanical and diffusion properties of Ti-Ta-Fe alloys in the Ti-rich region were investigated by utilizing a high-throughput method, with the combination of nanoindentation and diffusion couple techniques.Five gr...The mechanical and diffusion properties of Ti-Ta-Fe alloys in the Ti-rich region were investigated by utilizing a high-throughput method, with the combination of nanoindentation and diffusion couple techniques.Five groups of ternary Ti-Ta-Fe diffusion couples were prepared after annealing at 1273 K for 25 h. The composition-dependent mechanical properties of bcc Ti-Ta-Fe system were experimentally determined by means of nanoindentation and electron probe microanalysis(EPMA) techniques. Moreover, the interdiffusion coefficients of Ti-Ta-Fe alloys at 1273 K were confirmed from the composition gradients of the ternary diffusion couples with the support of a pragmatic numerical inverse method. A composition-dependent database on the mechanical and diffusion properties of Ti-Ta-Fe alloys was carefully established and utilized for the discussion of the processability during the hot working. The results indicated that the content of Fe should be controlled for the Ti alloys with high hardness and low Young’s modulus.展开更多
基金Project(50771086) supported by the National Natural Science Foundation of ChinaProject(NCET) supported by Program for New Century Excellent Talents in University, China+1 种基金Project(NCETFJ) supported by Program for New Century Excellent Talents in Fujian Province University, ChinaProject(2009H0039) supported by Fujian Provincial Department of Science and Technology, China
文摘The effects of Si addition on microstructures, mechanical and shape memory properties of Ti-55Ta biomedical alloy were investigated. The results show that the microstructures consist of mainly α′′ martensite and a little β phase, and the grain size decreases obviously with increasing Si addition. When x = 0.2, small （Ti, Ta）3Si precipitates are formed at grain boundaries. With further increasing Si content, the amount of the precipitates gradually increases. The tensile and yield strength of Ti-55Ta-xSi alloys gradually increase with increasing Si addition, whereas elongation decreases. Ti-55Ta-0.1Si alloy exhibits the lowest elastic modulus and the best shape memory recoverable strain. It is revealed that the refinement of grain and the precipitation of （Ti, Ta）3Si phase are responsible to the changes of their mechanical and shape memory properties.
基金financially supported by the National Natural Science Foundation of China(Nos.51871080,51931004 and 51571073)the Talent Training Program for Shandong Province Higher Educational Youth Innovative Teams(2019)。
文摘In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The singleα"martensite phase was dominated in Ti-Ta alloy with 2 at.%H f.Upon Hf content exceeded2 at.%,βphase started to appear.Moreover,the amount ofβphase gradually increased with Hf content increasing.The martensitic transformation temperatures continuously decreased with the increased Hf content,which was attributed to the rising of valence electron concentration.Meanwhile,Hf addition improved the thermal cycling stability of Ti-Ta alloys due to the suppression ofωprecipitation.The yield stress of Ti-Ta based alloys firstly decreased and then increased with Hf content increasing.In addition,the completely recoverable strain of 4%can be obtained in Ti-Ta alloy with 6 at.%Hf as a consequence of the higher critical stress for dislocation slip.Besieds,the Ti-Ta based alloy containing 8 at.%Hf had the superior superelasticity behavior with the fully recoverable strain of 2%at room temperature.
基金Project (PN-II-ID-PCE-2011-3-0218) supported by the Romanian National Authority for Scientific Research,CNCS-UEFISCDI
文摘Corrosion behaviour of the studied Ti12Mo and Ti60Ta alloys with the same Mo equivalent values （12%, mass fraction） together with the currently used metallic biomaterials Cp-Ti were investigated for dental applications. The electrochemical properties of the samples were examined using electrochemical techniques： such as open-circuit potential, potentiodynamic polarization curves and electrochemical impedance spectroscopy （EIS）, in two electrochemical media of artificial saliva and fluoridated artificial saliva （0.1%fluoride ions, F-） at 37 °C. Fluoride is commonly included in toothpastes, odontological gels and dental rinses to prevent dental caries and relieve dental sensitivity. The passive behaviour for all the titanium samples is observed for both solutions. The Ti60Ta alloy appears to possess superior corrosion resistance than the Ti12Mo and Cp-Ti in both electrochemical media.
文摘In order to evaluate the interfacial reaction, a SiCf/Ti (TA1) composite was fabricated by a vacuum hot pressing method and then heat-treated in vacuum at 800℃ for up to 100 h. The elemental distributions of C, Si and Ti at the interfacial reaction zone were investigated. It was found that the reaction zone occurs during the fabrication process and continuously grows at high temperature because the Si and C atoms diffuse from SiC fibers to the matrix and Ti atoms diffuse in the opposite direction. The growth of the reaction zone is diffusion controlled and the mechanism of the reaction can be described by a reactive diffusion model of solid-state growth of an AmBn layer between two elementary substances A and B.
基金Project(LQ21E040004) supported by the Natural Science Foundation of Zhejiang Province,ChinaProject(2021-Z03) supported by the State Key Laboratory of Advanced Metals and Materials,China。
基金Project(Q.J130000.2524.12H60)supported by the Ministry of Higher Education of Malaysia and Universiti Teknologi Malaysia。
文摘In the present study,the thermal,mechanical,and biological properties of xAg/Ti-30Ta(x=0,0.41,0.82 and 2.48 at%)shape memory alloys(SMAs)were investigated.The study was conducted using optical and scanning electron microscopy(SEM),X-ray diffractometry(XRD),compression test,and shape memory testing.The xAg/Ti-Ta was made using a powder metallurgy technique and microwave-sintering process.The results revealed that the addition of Ag has a significant effect on the pore size and shape,whereas the smallest pore size of 11μm was found with the addition of 0.41 at%along with a relative density of 72%.The fracture stress and strain increased with the addition of Ag,reaching the minimum values around 0.41 at%Ag.Therefore,this composition showed the maximum stress and strain at fracture region.Moreover,0.82 Ag/Ti-Ta shows more excellent corrosion resistance and biocompatibility than other percentages,obtaining almost the same behaviour of the pure Ti and Ti-6Al-4V alloys,which can be recommended for their promising and potential response for biomaterial applications.
基金financially supported by the National Natural Science Foundation for Youth of China (No. 51701083)the Guangzhou Science and Technology Association Young Talent Lifting Project, China (No. X20210201054)+1 种基金the Open Fund of National Joint Engineering Research Center for Abrasion Control and Molding of Metal Materials, China (No. HKDNM201903)the Guangdong Basic and Applied Basic Research Foundation, China (No. 2019A1515110095)。
文摘The mechanical and diffusion properties of Ti-Ta-Fe alloys in the Ti-rich region were investigated by utilizing a high-throughput method, with the combination of nanoindentation and diffusion couple techniques.Five groups of ternary Ti-Ta-Fe diffusion couples were prepared after annealing at 1273 K for 25 h. The composition-dependent mechanical properties of bcc Ti-Ta-Fe system were experimentally determined by means of nanoindentation and electron probe microanalysis(EPMA) techniques. Moreover, the interdiffusion coefficients of Ti-Ta-Fe alloys at 1273 K were confirmed from the composition gradients of the ternary diffusion couples with the support of a pragmatic numerical inverse method. A composition-dependent database on the mechanical and diffusion properties of Ti-Ta-Fe alloys was carefully established and utilized for the discussion of the processability during the hot working. The results indicated that the content of Fe should be controlled for the Ti alloys with high hardness and low Young’s modulus.
