The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part f...The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac- tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli- cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the cu.rent prediction methods were summa- rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic- explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com- plex thin-walled structures＇ part in aviation and aerospace field, the trends and challenges in wrin- kling prediction under complicated boundary conditions are presented.展开更多
A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room tempera...A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.展开更多
基金the National Natural Science Foundation of China(Nos.5090514451275415)National Basic Research Program of China(No.2010CB731701)+2 种基金Program for New Century Excellent Talents in University,Fundamental Research Funds for the Central Universities(3102014KYJD001)of Chinathe EU Marie Curie Actions–Mat Pro Future Project(FP7-PEOPLE-2012-IRSES-318968)of Chinathe‘‘111"Project(B08040)of China for the support to this research
文摘The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac- tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli- cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the cu.rent prediction methods were summa- rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic- explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com- plex thin-walled structures＇ part in aviation and aerospace field, the trends and challenges in wrin- kling prediction under complicated boundary conditions are presented.
文摘A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.
