Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new de...Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.展开更多
The influence of calcium treatment on non-metallic inclusions had been studied when control technology of refining top slag in ladle furnace was used in ultra-low oxygen steelmaking. A sufficient amount aluminium was ...The influence of calcium treatment on non-metallic inclusions had been studied when control technology of refining top slag in ladle furnace was used in ultra-low oxygen steelmaking. A sufficient amount aluminium was added to experimental heats for final deoxidizing during BOF tapping, and the refining top slag with strong reducibility, high basicity and high Al2O3 in ladle furnace was used to produce ultra-low oxygen steel and the transformation of nonmetallic inclusions in molten steel was compared by calcium treatment and no calcium treatment. The results show that the transformation of Al2O3--MgO - Al2O3 spinel-CaO-MgO-Al2O3 complex inclusions has been completed for aluminum deoxidation products and calcium treatment to molten steel is unnecessary when using the control technology of ladle furnace refining top slag to produce ultra-low oxygen steel, and the complex inclusions are liquid at the temperature of steelmaking and easily removable to obtain very high cleanliness steel by flotation. Further- more, the problems of nozzle clogging in casting operations do not happen and the remaining oxide inclusions in steel are the relatively lower melting point complex inclusions.展开更多
A high quality diet is believed to play a functional role in promoting the healthy growth of mankind and preventing many kinds of chronic degenerative diseases, including cancer, cardiovascular disease, diabetes, and ...A high quality diet is believed to play a functional role in promoting the healthy growth of mankind and preventing many kinds of chronic degenerative diseases, including cancer, cardiovascular disease, diabetes, and obesity. Adherence to a high quality diet has been strongly associated with a lower risk of mortality. To help promote healthy lifestyles and physical strength, the Chinese government has produced a new revised version of the Dietary Guidelines for Chinese Residents （2016） and the Chinese Food Pagoda, as guidance for dietary intake among its population. Similarly, the Japanese government has produced the Japanese Food Guide Spinning Top Model, and the US government has recently published revised dietary recommendations in its 2015-2020 eighth edition of Dietary Guidelines for Americans. The evidence from all respective cohort studies involved in producing these guidelines shows a reduced risk of many chronic diseases and mortality if the guidelines are followed. All scientific findings support encouraging the general population to consume a broad variety of food on the basis of nutrient and food intakes in order to prevent deficiency diseases and a surplus of energy and nutrients, and recommend daily physical activity for health promotion.展开更多
Trade facilitation is one of the five main agendas of the Belt and Road Initiative(BRI). Social network analysis has helped understand the complexity of trade networks, but existing studies tend to overlook the fact t...Trade facilitation is one of the five main agendas of the Belt and Road Initiative(BRI). Social network analysis has helped understand the complexity of trade networks, but existing studies tend to overlook the fact that not all bilateral trade relations are equally important to a country. To fill this gap in the literature, this paper focuses on the top 2 trade relations networks to illuminate the structure and evolution of B&R trade relations, the relative positions of different countries, and changes in the composition of trade communities(e.g., the community leaders) and the changing patterns of trade between them. We find rich dynamics over time both inter-and intra-communities. The overall international trade networks of B&R countries experienced a leadership change from Russia to China on one hand, some temporary communities experienced emergence, disappearance(e.g. the Kuwait-and Thailand-led communities) or reemergence(e.g. Poland-led community), and a community membership was generally consistent on the other hand. Since the future impacts of China's BRI will depend on the degree of integration of the connected regions, some countries with stable and high centrality indices(e.g. Russia, Singapore, Serbia, Greece, Turkey, Iran, Poland, Hungary and Romania) could be selected by China as strategic regional partners, and countries with a strategically important geographical position but weak trade links(e.g. Myanmar, Pakistan, and Belarus) should be prioritized.展开更多
In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derive...In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti＇ s wake oscillator model. Then Galerkin＇ s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and file corresponding numerical programs are compiled which solve the coupled equations directly in the time domain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7 is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers. The effect of internal flow on the dynamic characteristics and dynmnic response of the riser is analyzed and several valuable conelusions are drawn.展开更多
Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements...Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements in the carbonate cemented zones indicate that:(1) carbonate cements are composed dominantly of ferrocalcite,ferroan dolomite,and ankerite;(2) carbonate cements are formed under a high temperature circumstance in the subsurface,and organic fluid migration has an important effect on the formation of them;and(3) carbon and oxygen ions in the carbonate cements migrate from the underlying overpressured system.This suggests that the occurrence of carbonate cemented zones in this region results from multiple phases of organic fluid expulsion out of the overpressure compartment through geological time.This study provides a plausible mechanism of the formation of carbonate cemented zones adjacent to the top overpressured surface in the clastic sedimentary basins,and has an important implication for understanding the internal correlation between the formation of carbonate cemented zones adjacent to top overpressured surface and geofluids expulsion out of overpressured system.展开更多
An experimental system of flat plate pulsating heat pipe was established and experimental research was carried out in this system to know the mechanism of heat transfer, start-up and operating characteristics. The fac...An experimental system of flat plate pulsating heat pipe was established and experimental research was carried out in this system to know the mechanism of heat transfer, start-up and operating characteristics. The factors, such as filling rate, heating power, heating method etc, which have great influence on the thermal performance of the plate pulsating heat pipe were discussed. The results indicate that heating power and filling rate are the important factors for the start-up of the plate pulsating heat pipe. The different start-up power is needed with different filling rate, and the start-up of the heat pipe in case of bottom heated is much easier than that of top heated. Increasing the heating power and enlarging the heating area can make the start-up easier. Heating power can also affect the start-up time of heat pipe under the condition of bottom heated, while it does not have some influence to the heat pipe of top heated. The thermal resistance of plate pulsating heat pipe is related with the heating power, and the higher the heating power is, the smaller the thermal resistance is. But the best filling rate which the heat pipe needs is different with different heating methods, and the performance of the heat pipe in the case of bottom heated is better than the others.展开更多
Based on the engineering background of gob-side entry retaining in fully-mechanized longwall with top coal caving(GER-FLTC) on N2105 working face of Yuwu coal mine, by adopting the methods of theoretical analysis and ...Based on the engineering background of gob-side entry retaining in fully-mechanized longwall with top coal caving(GER-FLTC) on N2105 working face of Yuwu coal mine, by adopting the methods of theoretical analysis and numerical calculation, the control techniques of surrounding rocks in GER-FLTC working face are studied in this paper. The two main difficulties of stability of surrounding rocks at gob-side retained entry in fully-mechanized longwall working face are the stability control of top coal and control of large deformation of GER-FLTC working face. Interaction mechanical model between roofing and roadside backfilling in GER-FLTC is established and the equations for the calculation of roof-cutting resistance of roadside backfilling are derived. Results of numerical calculation show that the damage zones of top coal can be categorized into the delaminating zone of top coal above the backfilling, tensile damage zone of top coal above the retained roadway and shear damage zone of the upper rib of the solid coal. Stability control of top coal is the critical part to success of GER-FLTC. With consideration of large deformation of surrounding rocks of gob-side retained entry in fully-mechanized longwall, the support technique of‘‘roofing control and wall strengthening'' is proposed where high strength and highly prestressed anchor rods and diagonal tensile anchor cables support are used for top coal, high strength and highly prestressed yielding anchor rod support is used for solid coal and roadside prestressed load-carrying backfilling is constructed by high-water material, in order to maintain the integrity of the top coal, transfer load, high resistance yielding load-carrying of solid coal, roof-cutting of roadside backfilling and support,and to achieve GER-FLTC. Results from this study are successfully applied in engineering practice.展开更多
Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnag...Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnage, estimated at well over 1 billion tons, of the deposit makes it a target for recovery of valuable yttrium and HREEs （YHREEs）, and possibly other scarce ele-ments. Because of the extremely fine grain size of the mineralized rhyolite matrix, it has not been clear which minerals host the YHREEs and in what proportions. REE-bearing minerals reported in the deposit included bastn？site-Ce, Y-bearing fluorite, xeno-time-Y, zircon, aeschynite-Ce, a Ca-Th-Pb fluoride, and possibly ancylite-La and cerianite-Ce. Extended X-ray absorption fine struc-ture （EXAFS） indicated that virtually all of the yttrium, a proxy for the HREEs, resided in a coordination in the fluorite-type crystal structure, rather than those in the structures of bastn？site-Ce and xenotime-Y. The YREE grade of the Round Top deposit was just over 0.05%, with 72%of this consisting of YHREEs. This grade was in the range of the South China ionic clay deposits that supply essentially all of the world’s YHREEs. Because the host Y-bearing fluorite is soluble in dilute sulfuric acid at room temperature, a heap leaching of the deposit appeared feasible, aided by the fact that 90%-95%of the rock consists of unreactive and insoluble feld-spars and quartz. The absence of overburden, remarkable consistency of mineralization grade throughout the massive rhyolite, prox-imity （a few km） to a US interstate highway, major rail systems and gas and electricity, temperate climate, and stable political location in the world’s largest economy all enhanced the potential economic appeal of Round Top.展开更多
To evaluate the validity of cloud top height (CTH) retrievals from FY-4A, the first of China's next-generation geostationary meteorological satellite series, the retrievals are compared to those from Himawari-8, C...To evaluate the validity of cloud top height (CTH) retrievals from FY-4A, the first of China's next-generation geostationary meteorological satellite series, the retrievals are compared to those from Himawari-8, CloudSat, Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and Moderate Resolution Imaging Spectroradiometer (MODIS) operational products from August to October 2017. Regarding CTHs from CloudSat, CALIPSO, and MODIS as truth, the results show that the performance of FY-4A CTH retrievals is similar to that of Himawari-8. Both FY-4A and Himawari-8 retrieve reasonable CTH values for single-layer clouds, but perform poorly for multi-layer clouds. The mean bias error (MBE) shows that the mean value of FY-4A CTH retrievals is smaller than that of Himawari-8 for single-layer clouds but larger for multi-layer clouds. For ice crystal clouds, both FY-4A and Himawari-8 obtain the underestimated CTHs. However, there is a tendency for FY-4A and Himawari-8 to overestimate the CTH values of CloudSat and CALIPSO mainly for low level liquid water clouds. The temperature inversion near the tops of water clouds may result in an overestimation of CTHs. According to the MBE change with altitude, FY-4A and Himawari-8 overestimate the CTHs mainly for clouds below 3 km, and the overestimation is slightly more apparent in Himawari-8 data than that in FY-4A values. As the cloud optical thickness (COT) increases, the CTH bias of FY-4A CTH retrievals gradually decreases. Two typical cases are analyzed to illustrate the differences between different satellites' CTH retrievals in detail.展开更多
This tomb is a large-sized wooden-chamber pit at Xucungang, Zhulin township, Qixian county, Henan province. It has an earth-rammed mound at the top and a sloping tomb-passage at the southern end. In the pit is a circl...This tomb is a large-sized wooden-chamber pit at Xucungang, Zhulin township, Qixian county, Henan province. It has an earth-rammed mound at the top and a sloping tomb-passage at the southern end. In the pit is a circle of stone wall, the gap outside which is filled with charcoal, and the tomb bottom is covered with stoneslabs. The room within the walls is divided into two parts: the frontal for funeral objects and the rear for a wooden chamber and the coffin it encases. The chamber is triplex, built of narrow blocks of wood; the coffin, double, with the boards mortised together. Of the funeral objects, despite serious robbery, there remain jades, bronzes, irons, lacquered articles, and a number of “wu zhu” coins.Judging from the characteristic features of the tomb shape and grave goods, the tomb can be dated to the late Western Han period.展开更多
Flood discharge over top outlet of dam is simulated by 2 dimension water air two phase mathematical model. Distribution of dynamic pressure, turbulent kinetic energy (k), turbulent dissipation rate (ε), free wat...Flood discharge over top outlet of dam is simulated by 2 dimension water air two phase mathematical model. Distribution of dynamic pressure, turbulent kinetic energy (k), turbulent dissipation rate (ε), free water surface and velocity field have been obtained. The simulated results were tested by physical model, which shows that the computed results are identical with that of the physical model.展开更多
文摘Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.
基金Item Sponsored by National Basic Research Program of China(2010CB630806)
文摘The influence of calcium treatment on non-metallic inclusions had been studied when control technology of refining top slag in ladle furnace was used in ultra-low oxygen steelmaking. A sufficient amount aluminium was added to experimental heats for final deoxidizing during BOF tapping, and the refining top slag with strong reducibility, high basicity and high Al2O3 in ladle furnace was used to produce ultra-low oxygen steel and the transformation of nonmetallic inclusions in molten steel was compared by calcium treatment and no calcium treatment. The results show that the transformation of Al2O3--MgO - Al2O3 spinel-CaO-MgO-Al2O3 complex inclusions has been completed for aluminum deoxidation products and calcium treatment to molten steel is unnecessary when using the control technology of ladle furnace refining top slag to produce ultra-low oxygen steel, and the complex inclusions are liquid at the temperature of steelmaking and easily removable to obtain very high cleanliness steel by flotation. Further- more, the problems of nozzle clogging in casting operations do not happen and the remaining oxide inclusions in steel are the relatively lower melting point complex inclusions.
文摘A high quality diet is believed to play a functional role in promoting the healthy growth of mankind and preventing many kinds of chronic degenerative diseases, including cancer, cardiovascular disease, diabetes, and obesity. Adherence to a high quality diet has been strongly associated with a lower risk of mortality. To help promote healthy lifestyles and physical strength, the Chinese government has produced a new revised version of the Dietary Guidelines for Chinese Residents （2016） and the Chinese Food Pagoda, as guidance for dietary intake among its population. Similarly, the Japanese government has produced the Japanese Food Guide Spinning Top Model, and the US government has recently published revised dietary recommendations in its 2015-2020 eighth edition of Dietary Guidelines for Americans. The evidence from all respective cohort studies involved in producing these guidelines shows a reduced risk of many chronic diseases and mortality if the guidelines are followed. All scientific findings support encouraging the general population to consume a broad variety of food on the basis of nutrient and food intakes in order to prevent deficiency diseases and a surplus of energy and nutrients, and recommend daily physical activity for health promotion.
基金National Social Science Foundation of China,No.17VDL008The Project of Bureau of International Cooperation of the Chinese Academy of Sciences,No.131A11KYSB20170014+1 种基金National Natural Science Foundation of China,No.41530751,No.41471113,No.41701125Ministry of Education of the Republic of Korea and the National Research Foundation of Korea,No.NRF-2015S1A3A2047036
文摘Trade facilitation is one of the five main agendas of the Belt and Road Initiative(BRI). Social network analysis has helped understand the complexity of trade networks, but existing studies tend to overlook the fact that not all bilateral trade relations are equally important to a country. To fill this gap in the literature, this paper focuses on the top 2 trade relations networks to illuminate the structure and evolution of B&R trade relations, the relative positions of different countries, and changes in the composition of trade communities(e.g., the community leaders) and the changing patterns of trade between them. We find rich dynamics over time both inter-and intra-communities. The overall international trade networks of B&R countries experienced a leadership change from Russia to China on one hand, some temporary communities experienced emergence, disappearance(e.g. the Kuwait-and Thailand-led communities) or reemergence(e.g. Poland-led community), and a community membership was generally consistent on the other hand. Since the future impacts of China's BRI will depend on the degree of integration of the connected regions, some countries with stable and high centrality indices(e.g. Russia, Singapore, Serbia, Greece, Turkey, Iran, Poland, Hungary and Romania) could be selected by China as strategic regional partners, and countries with a strategically important geographical position but weak trade links(e.g. Myanmar, Pakistan, and Belarus) should be prioritized.
基金supported by the National High Technology Research and Development Program of China(863 Program,Grant No.2006AA09Z356 and No.2007AA09Z313)
文摘In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti＇ s wake oscillator model. Then Galerkin＇ s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and file corresponding numerical programs are compiled which solve the coupled equations directly in the time domain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7 is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers. The effect of internal flow on the dynamic characteristics and dynmnic response of the riser is analyzed and several valuable conelusions are drawn.
基金supported by the Important National Science & Technology Specific Projects (Grant No.2008ZX05001)Scientific Development Projects of Petrochina Company Limited (Grant No.2008B-0100)+2 种基金the Doctoral Education Program Fund of Ministry of Education,China (Grant No.20060491505)American Association of Petroleum Geologists Grants-in-Aid Foundation ProgramNational Natural Science Foundation of China (Grant Nos.40739904,40902039)
文摘Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements in the carbonate cemented zones indicate that:(1) carbonate cements are composed dominantly of ferrocalcite,ferroan dolomite,and ankerite;(2) carbonate cements are formed under a high temperature circumstance in the subsurface,and organic fluid migration has an important effect on the formation of them;and(3) carbon and oxygen ions in the carbonate cements migrate from the underlying overpressured system.This suggests that the occurrence of carbonate cemented zones in this region results from multiple phases of organic fluid expulsion out of the overpressure compartment through geological time.This study provides a plausible mechanism of the formation of carbonate cemented zones adjacent to the top overpressured surface in the clastic sedimentary basins,and has an important implication for understanding the internal correlation between the formation of carbonate cemented zones adjacent to top overpressured surface and geofluids expulsion out of overpressured system.
基金support of this work by the National Natural Science Foundation of China (No.50776006)
文摘An experimental system of flat plate pulsating heat pipe was established and experimental research was carried out in this system to know the mechanism of heat transfer, start-up and operating characteristics. The factors, such as filling rate, heating power, heating method etc, which have great influence on the thermal performance of the plate pulsating heat pipe were discussed. The results indicate that heating power and filling rate are the important factors for the start-up of the plate pulsating heat pipe. The different start-up power is needed with different filling rate, and the start-up of the heat pipe in case of bottom heated is much easier than that of top heated. Increasing the heating power and enlarging the heating area can make the start-up easier. Heating power can also affect the start-up time of heat pipe under the condition of bottom heated, while it does not have some influence to the heat pipe of top heated. The thermal resistance of plate pulsating heat pipe is related with the heating power, and the higher the heating power is, the smaller the thermal resistance is. But the best filling rate which the heat pipe needs is different with different heating methods, and the performance of the heat pipe in the case of bottom heated is better than the others.
基金supported by Chinese National Programs for Fundamental Research and Development(973 Program)(2013CB227905)Natural Science Foundation of Jiangsu Province of China(BK20140210)
文摘Based on the engineering background of gob-side entry retaining in fully-mechanized longwall with top coal caving(GER-FLTC) on N2105 working face of Yuwu coal mine, by adopting the methods of theoretical analysis and numerical calculation, the control techniques of surrounding rocks in GER-FLTC working face are studied in this paper. The two main difficulties of stability of surrounding rocks at gob-side retained entry in fully-mechanized longwall working face are the stability control of top coal and control of large deformation of GER-FLTC working face. Interaction mechanical model between roofing and roadside backfilling in GER-FLTC is established and the equations for the calculation of roof-cutting resistance of roadside backfilling are derived. Results of numerical calculation show that the damage zones of top coal can be categorized into the delaminating zone of top coal above the backfilling, tensile damage zone of top coal above the retained roadway and shear damage zone of the upper rib of the solid coal. Stability control of top coal is the critical part to success of GER-FLTC. With consideration of large deformation of surrounding rocks of gob-side retained entry in fully-mechanized longwall, the support technique of‘‘roofing control and wall strengthening'' is proposed where high strength and highly prestressed anchor rods and diagonal tensile anchor cables support are used for top coal, high strength and highly prestressed yielding anchor rod support is used for solid coal and roadside prestressed load-carrying backfilling is constructed by high-water material, in order to maintain the integrity of the top coal, transfer load, high resistance yielding load-carrying of solid coal, roof-cutting of roadside backfilling and support,and to achieve GER-FLTC. Results from this study are successfully applied in engineering practice.
基金Project supported by Research Contracts 26-8211-12 and 26-8211-16 between Texas Rare Earth Resources,Inc.and the University of Texas at El Paso
文摘Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnage, estimated at well over 1 billion tons, of the deposit makes it a target for recovery of valuable yttrium and HREEs （YHREEs）, and possibly other scarce ele-ments. Because of the extremely fine grain size of the mineralized rhyolite matrix, it has not been clear which minerals host the YHREEs and in what proportions. REE-bearing minerals reported in the deposit included bastn？site-Ce, Y-bearing fluorite, xeno-time-Y, zircon, aeschynite-Ce, a Ca-Th-Pb fluoride, and possibly ancylite-La and cerianite-Ce. Extended X-ray absorption fine struc-ture （EXAFS） indicated that virtually all of the yttrium, a proxy for the HREEs, resided in a coordination in the fluorite-type crystal structure, rather than those in the structures of bastn？site-Ce and xenotime-Y. The YREE grade of the Round Top deposit was just over 0.05%, with 72%of this consisting of YHREEs. This grade was in the range of the South China ionic clay deposits that supply essentially all of the world’s YHREEs. Because the host Y-bearing fluorite is soluble in dilute sulfuric acid at room temperature, a heap leaching of the deposit appeared feasible, aided by the fact that 90%-95%of the rock consists of unreactive and insoluble feld-spars and quartz. The absence of overburden, remarkable consistency of mineralization grade throughout the massive rhyolite, prox-imity （a few km） to a US interstate highway, major rail systems and gas and electricity, temperate climate, and stable political location in the world’s largest economy all enhanced the potential economic appeal of Round Top.
基金Supported by the National Natural Science Foundation of China(41705007 and 41575028)
文摘To evaluate the validity of cloud top height (CTH) retrievals from FY-4A, the first of China's next-generation geostationary meteorological satellite series, the retrievals are compared to those from Himawari-8, CloudSat, Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and Moderate Resolution Imaging Spectroradiometer (MODIS) operational products from August to October 2017. Regarding CTHs from CloudSat, CALIPSO, and MODIS as truth, the results show that the performance of FY-4A CTH retrievals is similar to that of Himawari-8. Both FY-4A and Himawari-8 retrieve reasonable CTH values for single-layer clouds, but perform poorly for multi-layer clouds. The mean bias error (MBE) shows that the mean value of FY-4A CTH retrievals is smaller than that of Himawari-8 for single-layer clouds but larger for multi-layer clouds. For ice crystal clouds, both FY-4A and Himawari-8 obtain the underestimated CTHs. However, there is a tendency for FY-4A and Himawari-8 to overestimate the CTH values of CloudSat and CALIPSO mainly for low level liquid water clouds. The temperature inversion near the tops of water clouds may result in an overestimation of CTHs. According to the MBE change with altitude, FY-4A and Himawari-8 overestimate the CTHs mainly for clouds below 3 km, and the overestimation is slightly more apparent in Himawari-8 data than that in FY-4A values. As the cloud optical thickness (COT) increases, the CTH bias of FY-4A CTH retrievals gradually decreases. Two typical cases are analyzed to illustrate the differences between different satellites' CTH retrievals in detail.
文摘This tomb is a large-sized wooden-chamber pit at Xucungang, Zhulin township, Qixian county, Henan province. It has an earth-rammed mound at the top and a sloping tomb-passage at the southern end. In the pit is a circle of stone wall, the gap outside which is filled with charcoal, and the tomb bottom is covered with stoneslabs. The room within the walls is divided into two parts: the frontal for funeral objects and the rear for a wooden chamber and the coffin it encases. The chamber is triplex, built of narrow blocks of wood; the coffin, double, with the boards mortised together. Of the funeral objects, despite serious robbery, there remain jades, bronzes, irons, lacquered articles, and a number of “wu zhu” coins.Judging from the characteristic features of the tomb shape and grave goods, the tomb can be dated to the late Western Han period.
文摘Flood discharge over top outlet of dam is simulated by 2 dimension water air two phase mathematical model. Distribution of dynamic pressure, turbulent kinetic energy (k), turbulent dissipation rate (ε), free water surface and velocity field have been obtained. The simulated results were tested by physical model, which shows that the computed results are identical with that of the physical model.
