本文研究了 Ti-Al-Nb 系中广泛成分范围里的金属间化合物基合金在900—1200℃等温静态氧化时的抗氧化性能.研究结果表明,合金的 Al 含量以及 Ti 和 Nb 的原子比影响合金的抗氧化性能.Al 提高合金的氧化抗力,而过高或过低的 Ti 和 Nb 的...本文研究了 Ti-Al-Nb 系中广泛成分范围里的金属间化合物基合金在900—1200℃等温静态氧化时的抗氧化性能.研究结果表明,合金的 Al 含量以及 Ti 和 Nb 的原子比影响合金的抗氧化性能.Al 提高合金的氧化抗力,而过高或过低的 Ti 和 Nb 的原子比都显著地降低合金的氧化抗力.用 X 射线衍射法测定了氧化膜的组成,指出具有完整的 Al_2O_3保护膜是这类合金具有优良的抗氧化性能的基本条件.提出了 Ti-Al-Nb 系中具有优良抗氧化性能合金的成分范围.在所得到的氧化图上清楚地显示了氧化水平、氧化膜的组成、氧化温度及合金成分之间的关系.研究了两个典型合金的氧化动力学曲线,并讨论了氧化机理.展开更多
The tribology behaviors of Ti6Al7Nb,its alloy with N-ion implantation,and its alloy with diamond-like carbon(DLC)coating were investigated in artificial saliva.Fretting wear tests of untreated,N-ion implanted and DLC ...The tribology behaviors of Ti6Al7Nb,its alloy with N-ion implantation,and its alloy with diamond-like carbon(DLC)coating were investigated in artificial saliva.Fretting wear tests of untreated,N-ion implanted and DLC coated Ti6Al7Nb alloys plate against a Si3N4ball were carried out on a reciprocating sliding fretting wear test rig.Based on the analysis of X-ray diffraction,Raman spectroscopy,3-D profiler,SEM morphologies and frictional kinetics behavior analysis,the damage behavior of surface modification layer was discussed in detail.The results indicated that the fretting wear behavior of Ti6Al7Nb alloy with N-ion implantation was increased with the dose increase of the implanted nitrogen ions.Moreover,the DLC-coated Ti6Al7Nb alloy with low ion implantation could improve the fretting wear behavior greatly.In addition,the Ti6Al7Nb with DLC coating had better ncorrosion resistance due to the special compact structure.All results suggested that the Ti6Al7Nb with DLC coating had better wear resistance than that with N-ion implantation in artificial saliva.展开更多
文摘本文研究了 Ti-Al-Nb 系中广泛成分范围里的金属间化合物基合金在900—1200℃等温静态氧化时的抗氧化性能.研究结果表明,合金的 Al 含量以及 Ti 和 Nb 的原子比影响合金的抗氧化性能.Al 提高合金的氧化抗力,而过高或过低的 Ti 和 Nb 的原子比都显著地降低合金的氧化抗力.用 X 射线衍射法测定了氧化膜的组成,指出具有完整的 Al_2O_3保护膜是这类合金具有优良的抗氧化性能的基本条件.提出了 Ti-Al-Nb 系中具有优良抗氧化性能合金的成分范围.在所得到的氧化图上清楚地显示了氧化水平、氧化膜的组成、氧化温度及合金成分之间的关系.研究了两个典型合金的氧化动力学曲线,并讨论了氧化机理.
文摘The tribology behaviors of Ti6Al7Nb,its alloy with N-ion implantation,and its alloy with diamond-like carbon(DLC)coating were investigated in artificial saliva.Fretting wear tests of untreated,N-ion implanted and DLC coated Ti6Al7Nb alloys plate against a Si3N4ball were carried out on a reciprocating sliding fretting wear test rig.Based on the analysis of X-ray diffraction,Raman spectroscopy,3-D profiler,SEM morphologies and frictional kinetics behavior analysis,the damage behavior of surface modification layer was discussed in detail.The results indicated that the fretting wear behavior of Ti6Al7Nb alloy with N-ion implantation was increased with the dose increase of the implanted nitrogen ions.Moreover,the DLC-coated Ti6Al7Nb alloy with low ion implantation could improve the fretting wear behavior greatly.In addition,the Ti6Al7Nb with DLC coating had better ncorrosion resistance due to the special compact structure.All results suggested that the Ti6Al7Nb with DLC coating had better wear resistance than that with N-ion implantation in artificial saliva.
