For zone-melted （ZM） bismuth telluride-based alloys, which are widely commercially available for solidstate cooling and low-temperature power generation around room temperature, introducing point defects is the chie...For zone-melted （ZM） bismuth telluride-based alloys, which are widely commercially available for solidstate cooling and low-temperature power generation around room temperature, introducing point defects is the chief approach to improve their thermoelectric performance. Herein, we report the multiple effects of Se doping on thermoelectric performance of p-type Bi0.5Sb1,5Te3-xSex ＋ 3 wt% Te ZM ingots, which increases carrier concentration, reduces lattice thermal conductivity and deteriorates the carrier mobility. As a result, the peak figure of merit （ZT） is shifted to a higher temperature and a high ZT 1.2 at 350 K is obtained, due to the reduced thermal conductivity and suppressed intrinsic conduction. Further, decreasing Sb content is followed to optimize the room temperature performance and a ZT - 1.1 at 300 K is obtained. These results are significant for designing and optimizing the thermoelectric performance of commercial Bi0.5Sb1.5Te3＋ 3 wt% Te ZM alloys.展开更多
The study was conducted to determine the applicability of gravity separation method on the Ashashire gold ore deposit Benishangul gumuz region, western Ethiopia. The Ashashire composite was produced to provide suffici...The study was conducted to determine the applicability of gravity separation method on the Ashashire gold ore deposit Benishangul gumuz region, western Ethiopia. The Ashashire composite was produced to provide sufficient mass for this study and experiment, including sample preparation, mineralogical analysis of gold and associated elements, gravity concentration, and data interpretation and analysis. During the study, a grind optimization was conducted on the composites sample with varying grind size to evaluate the effect of grind size on gold recovery. The ore was moderately ground to the standard grind size of 80%, passing 106 µm, 75 µm, 53 µm and this nominal size was selected for the preliminary assessment for concentration optimization for this deposit. The gravity testing comprised three-stage concentration using Knelson concentrator. High recovery of gold from the gravity concentrates was achieved from the second gravity concentration. Based on the laboratory experimental result analysis, a grind size of P80 75 µm is selected as optimal size for the Ashashire gold deposit. Increasing the grind size from P80 of 75 µm to 106 µm decreases the recovery rate from 75% to 54%, or decreasing the grind size from P80 of 75 µm to 53 µm decreases the gold recovery rate to 37%. The native gold grain in the ores is mostly associated with quartz and fine gold is closely associated with pyrite. According to analysis of the fire assay, chemical, and mineralogical data, only gold and telluride is commercially valuable elements in the ores. Predominantly gold was occurred in the native form of Au-Te. The sample subjected to gravity separation assayed about 2.6 g/t Au.展开更多
SnTe, as the nontoxic analogue to high-performance PbTe thermoelectric material, has captured the worldwide interest recently. Many triumphant instances focus on the strategies of band convergence, resonant doping, an...SnTe, as the nontoxic analogue to high-performance PbTe thermoelectric material, has captured the worldwide interest recently. Many triumphant instances focus on the strategies of band convergence, resonant doping, and nano-precipitates phonon scattering. Herein, the p-type SnTe-based materials Sn0.85-xSb0.15MgxTe (x=0-0.10) are fabricated and a combined effect of Sb and Mg is investigated. Sb alloying tunes the hole carrier concentration of SnTe and decreases the lattice thermal conductivity. Mg alloying leads to a nearly hundredfold rise of disorder parameter due to the large mass and strain fluctuations, and as a consequence the lattice thermal conductivity decreases further down to ~0.64Wm^-1K^-1 at 773K, close to the theoretical minimum of the lattice thermal conductivity (~0.50Wm^-1K^-1) of SnTe. In conjunction with the enhancement of the Seebeck coefficient caused by band convergence due to Mg alloying, the maximum zTmax reaches ~1.02 and the device zTdevice of ~0.50 at 773K for Sn0.79Sb0.15Mg0.06Te, suggesting this SnTe-based composition has a promising potential in intermediate temperature thermoelectric applications.展开更多
In the 21^(st)century,the rapid development of human society has made people’s demand for green energy more and more urgent.The high-energy-density hydrogen energy obtained by fully splitting water is not only enviro...In the 21^(st)century,the rapid development of human society has made people’s demand for green energy more and more urgent.The high-energy-density hydrogen energy obtained by fully splitting water is not only environmentally friendly,but also is expected to solve the problems caused by the intermittent nature of new energy.However,the slow kinetics and large overpotential of the oxygen evolution reaction(OER)limit its application.The introduction of Te element is expected to bring new breakthroughs.With the least electronegativity among the chalcogens,the Te element has many special properties,such as multivalent states,strong covalentity,and high electrical conductivity,which make it a promising candidate in electrocatalytic OER.In this review,we introduce the peculiarities of Te element,summarize Te doping and the extraordinary performance of its compounds in OER,with emphasis on the scientific mechanism behind Te element promoting the OER kinetic process.Finally,challenges and development prospects of the applications of Te element in OER are presented.展开更多
Novel high-efficiency visible-light-sensitive Nd-doped CdTe nanoparticles were prepared with various doping concentra- tions of neodymium ion by a facile hydrothermal method. The reaction products were analyzed via X-...Novel high-efficiency visible-light-sensitive Nd-doped CdTe nanoparticles were prepared with various doping concentra- tions of neodymium ion by a facile hydrothermal method. The reaction products were analyzed via X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, photoelectron spectroscopy （XPS）, and UV-Vis diffuse re- flectance spectroscopy techniques. Red shift was seen in the absorption band edge peak in the UV-Vis absorbance specmun with in- creasing Nd content. The XRD and XPS results confirmed that Nd ions successfully replaced Cd atoms and were incorporated into the crystal lattice of CdTe. SEM and TEM images indicated spherical structure and high crystallinity. Even at a very low Nd/CdTe molar ratio of 2 mol.%, Nd doping could greatly enhance the photocatalytic activity of CdTe. The photocatalytic activity of Nd-doped CdTe nanoparticles was evaluated by monitoring the decolorization of RRed 43 in aqueous solution under visible-light irradiation. The color removal efficiency of Nd0.08Cd0.9eYe and pure CdTe were 83.14% and 14.32% after 100 min of treatment, respectively. Among different amounts of the doping agent, 8 tool.% Nd indicated the highest decolorization. The presence of radical scavengers such as CF, CO3-, SO4〉, and huthanol was found to reduce the decolorization efficiency.展开更多
An aqueous synthetic route has been developed for the preparation of mercaptosuccinic acid（MSA）-capped CdTe quantum dots （QDs） using TeO_2 as tellurium source and sodium borohydride as reductant.The size and the e...An aqueous synthetic route has been developed for the preparation of mercaptosuccinic acid（MSA）-capped CdTe quantum dots （QDs） using TeO_2 as tellurium source and sodium borohydride as reductant.The size and the emission color of CdTe QDs can be tuned by varying the reflux time.The obtained QDs were characterized by photoluminescence（PL） spectroscopy,X-ray powder diffraction（XRD） and high-resolution transmission electron microscopy（HRTEM）.The results show that the CdTe QDs were of zinc-blende crystal structure in a sphere-like shape.展开更多
Te treatment is an effective method for modifying sulfide inclusions,and MnTe precipitation has an important effect on thermal brittleness and steel corrosion resistance.In most actual industrial applications of Te tr...Te treatment is an effective method for modifying sulfide inclusions,and MnTe precipitation has an important effect on thermal brittleness and steel corrosion resistance.In most actual industrial applications of Te treatment,MnTe precipitation is unexpected.The critical precipitation behavior of MnTe inclusions was investigated through scanning electron microscopy,transmission electron microscopy,machine learning,and first-principles calculation.MnTe preferentially precipitated at the container mouth for sphere-like sulfides and at the interface between MnS grain boundaries and steel matrix for rod-like sulfides.The MnS/MnTe interface was semicoherent.A composition transition zone with a rock-salt structure exhibiting periodic changes existed to maintain the semicoherent interface.The critical precipitation behavior of MnTe inclusions in resulfurized steels involved three stages at varying temperatures.First,Mn(S,Te)precipitated during solidification.Second,MnTe with a rock-salt structure precipitated from Mn(S,Te).Third,MnTe with a hexagonal NiAs structure transformed from the rock-salt structure.The solubility of Te in MnS decreased with decreasing temperature.The critical precipitation behavior of MnTe inclusions in resulfurized steels was related to the MnS precipitation temperature.With the increase in MnS precipitation temperature,the critical Te/S weight ratio decreased.In consideration of the cost-effectiveness of Te addition for industrial production,the Te content in resulfurized steels should be controlled in accordance with MnS precipitation temperature and S content.展开更多
Materials with both large magnetocaloric response and high thermoelectric performance are of vital importance for all-solid-state thermoelectromagnetic cooling.These two properties,however,hardly coexist in single pha...Materials with both large magnetocaloric response and high thermoelectric performance are of vital importance for all-solid-state thermoelectromagnetic cooling.These two properties,however,hardly coexist in single phase materials except previously reported hexagonal Cr_(1-x)Te half metal where a relatively high magnetic entropy change(-△S_(M))of~2.4 J·kg^(-1)·K^(-1)@5 T and a moderate thermoelectric figure of merit(ZT)of~1.2×10^(-2)@300 K are simultaneously recorded.Herein we aim to increase the thermoelectric performance of Cr_(1-x)Te by compositing with semiconducting Ag_(2)Te.It is discovered that the in-situ synthesis of Cr_(1-x)Te/Ag_(2)Te composites by reacting their constitute elements above melting temperatures is unsuccessful because of strong phase competition.Specifically,at elevated temperatures(T>800 K),Cr_(1-x)Te has a much lower deformation energy than Ag_(2)Te and tends to become more Cr-deficient by capturing Te from Ag_(2)Te.Therefore,Ag is insufficiently reacted and as a metal it deteriorates ZT.We then rationalize the synthesis of Cr_(1-x)Te/Ag_(2)Te composites by ex-situ mix of the pre-prepared Cr_(1-x)Te and Ag_(2)Te binary compounds followed by densification at a low sintering temperature of 573 K under a pressure of 3.5 GPa.We show that by compositing with 7 mol%Ag_(2)Te,the Seebeck coefficient of Cr_(1-x)Te is largely increased while the lattice thermal conductivity is considerably reduced,leading to 72%improvement of ZT.By comparison,-△S_(M)is only slightly reduced by 10%in the composite.Our work demonstrates the potential of Cr_(1-x)Te/Ag_(2)Te composites for thermoelectromagnetic cooling.展开更多
Low carbon alcohol fuels electrolysis under ambient conditions is promising for green hydrogen generation instead of the traditional alcohol fuels steam reforming technique,and highly efficient bifunctional catalysts ...Low carbon alcohol fuels electrolysis under ambient conditions is promising for green hydrogen generation instead of the traditional alcohol fuels steam reforming technique,and highly efficient bifunctional catalysts for membrane electrode fabrication are required to drive the electrolysis reactions.Herein,the efficient catalytic promotion effect of a novel catalyst promoter,CoTe,on Pt is demonstrated for low carbon alcohol fuels of methanol and ethanol electrolysis for hydrogen generation.Experimental and density functional theory calculation results indicate that the optimized electronic structure of Pt–CoTe/C resulting from the synergetic effect between Pt and CoTe further regulates the adsorption energies of CO and H*that enhances the catalytic ability for methanol and ethanol electrolysis.Moreover,the good water activation ability of CoTe and the strong electronic effect of Pt and CoTe increased the tolerance ability to the poisoning species as demonstrated by the CO-stripping technique.The high catalytic kinetics and stability,as well as the promotion effect,were also carefully discussed.Specifically,71.9%and 75.5%of the initial peak current density was maintained after 1000 CV cycles in acid electrolyte for methanol and ethanol oxidation;and a low overpotential of 30 and 35 mV was required to drive the hydrogen evolution reaction in methanol and ethanol solution at the current density of 10 mA cm^(-2).In the two-electrode system for alcohol fuels electrolysis,using the optimal Pt–CoTe/C catalyst as bi-functional catalysts,the cell potential of 0.66 V(0.67 V)was required to achieve 10 mA cm^(-2) for methanol(ethanol)electrolysis,much smaller than that of water electrolysis(1.76 V).The current study offers a novel platform for hydrogen generation via low carbon alcohol fuel electrolysis,and the result is helpful to the catalysis mechanism understanding of Pt assisted by the novel promoter.展开更多
Photovoltaic(PV)windows have received more and more attention in recent years since their active energy-saving advantages.Considering the surface covered with solar cell modules,the indoor daylight environment of PV w...Photovoltaic(PV)windows have received more and more attention in recent years since their active energy-saving advantages.Considering the surface covered with solar cell modules,the indoor daylight environment of PV windows is obviously different with clear glass windows.However,despite many scholars have studied the indoor daylight environment of PV windows,there few investigations study it from the perspective of human subjective visual perception.In this paper,the indoor daylight environment and human visual comfort of building with Cadmium Telluride Photovoltaic(CdTe-PV)window were investigated.Firstly,the parameters of indoor daylight environment and subjective questionnaires in rooms with CdTe-PV window and clear glass window were analyzed respectively.On the basis of this,combined with indoor working surface illuminance and results of subjective questionnaires,the daylight illuminance threshold of human visual comfort was investigated by the method of Mean Bias Degree(MBD).Finally,an evaluation model for indoor daylight environment of buildings with CdTe-PV window was developed by Fuzzy Comprehensive Evaluation Method.The results showed that the working surface illuminance of CdTe-PV window was lower than that of clear glass room,the CCT of different windows room had a minor gap and the CdTe-PV window room was closer to the recommended range that was 3300-5000K.As for CRI,both the CdTe-PV window room and the clear glass room could meet the visual comfort requirements of office staff.Furthermore,it was found that the requirement of human visual comfort was met when indoor working surface illuminance varies between 500-2200lx in the room with CdTe-PV window.At last,according to the comprehensive evaluation model proposed in this paper,it was found that the indoor daylight environment of buildings with CdTe-PV window was excellent in the present experiment.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 61534001 and 11574267)the National Science Fund for Distinguished Young Scholars (No.51725102)
文摘For zone-melted （ZM） bismuth telluride-based alloys, which are widely commercially available for solidstate cooling and low-temperature power generation around room temperature, introducing point defects is the chief approach to improve their thermoelectric performance. Herein, we report the multiple effects of Se doping on thermoelectric performance of p-type Bi0.5Sb1,5Te3-xSex ＋ 3 wt% Te ZM ingots, which increases carrier concentration, reduces lattice thermal conductivity and deteriorates the carrier mobility. As a result, the peak figure of merit （ZT） is shifted to a higher temperature and a high ZT 1.2 at 350 K is obtained, due to the reduced thermal conductivity and suppressed intrinsic conduction. Further, decreasing Sb content is followed to optimize the room temperature performance and a ZT - 1.1 at 300 K is obtained. These results are significant for designing and optimizing the thermoelectric performance of commercial Bi0.5Sb1.5Te3＋ 3 wt% Te ZM alloys.
文摘The study was conducted to determine the applicability of gravity separation method on the Ashashire gold ore deposit Benishangul gumuz region, western Ethiopia. The Ashashire composite was produced to provide sufficient mass for this study and experiment, including sample preparation, mineralogical analysis of gold and associated elements, gravity concentration, and data interpretation and analysis. During the study, a grind optimization was conducted on the composites sample with varying grind size to evaluate the effect of grind size on gold recovery. The ore was moderately ground to the standard grind size of 80%, passing 106 µm, 75 µm, 53 µm and this nominal size was selected for the preliminary assessment for concentration optimization for this deposit. The gravity testing comprised three-stage concentration using Knelson concentrator. High recovery of gold from the gravity concentrates was achieved from the second gravity concentration. Based on the laboratory experimental result analysis, a grind size of P80 75 µm is selected as optimal size for the Ashashire gold deposit. Increasing the grind size from P80 of 75 µm to 106 µm decreases the recovery rate from 75% to 54%, or decreasing the grind size from P80 of 75 µm to 53 µm decreases the gold recovery rate to 37%. The native gold grain in the ores is mostly associated with quartz and fine gold is closely associated with pyrite. According to analysis of the fire assay, chemical, and mineralogical data, only gold and telluride is commercially valuable elements in the ores. Predominantly gold was occurred in the native form of Au-Te. The sample subjected to gravity separation assayed about 2.6 g/t Au.
基金supported by the National Key Research and Development Program of China (2018YFB0703600)the National Science Fund for Distinguished Young Scholars (51725102)the National Natural Science Foundation of China (51861145305, 51761135127, and 51871199)
文摘SnTe, as the nontoxic analogue to high-performance PbTe thermoelectric material, has captured the worldwide interest recently. Many triumphant instances focus on the strategies of band convergence, resonant doping, and nano-precipitates phonon scattering. Herein, the p-type SnTe-based materials Sn0.85-xSb0.15MgxTe (x=0-0.10) are fabricated and a combined effect of Sb and Mg is investigated. Sb alloying tunes the hole carrier concentration of SnTe and decreases the lattice thermal conductivity. Mg alloying leads to a nearly hundredfold rise of disorder parameter due to the large mass and strain fluctuations, and as a consequence the lattice thermal conductivity decreases further down to ~0.64Wm^-1K^-1 at 773K, close to the theoretical minimum of the lattice thermal conductivity (~0.50Wm^-1K^-1) of SnTe. In conjunction with the enhancement of the Seebeck coefficient caused by band convergence due to Mg alloying, the maximum zTmax reaches ~1.02 and the device zTdevice of ~0.50 at 773K for Sn0.79Sb0.15Mg0.06Te, suggesting this SnTe-based composition has a promising potential in intermediate temperature thermoelectric applications.
基金support from the National Natural Science Foundation of China(No.21905317)the Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001).
文摘In the 21^(st)century,the rapid development of human society has made people’s demand for green energy more and more urgent.The high-energy-density hydrogen energy obtained by fully splitting water is not only environmentally friendly,but also is expected to solve the problems caused by the intermittent nature of new energy.However,the slow kinetics and large overpotential of the oxygen evolution reaction(OER)limit its application.The introduction of Te element is expected to bring new breakthroughs.With the least electronegativity among the chalcogens,the Te element has many special properties,such as multivalent states,strong covalentity,and high electrical conductivity,which make it a promising candidate in electrocatalytic OER.In this review,we introduce the peculiarities of Te element,summarize Te doping and the extraordinary performance of its compounds in OER,with emphasis on the scientific mechanism behind Te element promoting the OER kinetic process.Finally,challenges and development prospects of the applications of Te element in OER are presented.
基金supported by the New&Renewable Energy Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial Resource from the Ministry of Trade+1 种基金Industry&EnergyRepublic of Korea(2012T100201679)
文摘Novel high-efficiency visible-light-sensitive Nd-doped CdTe nanoparticles were prepared with various doping concentra- tions of neodymium ion by a facile hydrothermal method. The reaction products were analyzed via X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, photoelectron spectroscopy （XPS）, and UV-Vis diffuse re- flectance spectroscopy techniques. Red shift was seen in the absorption band edge peak in the UV-Vis absorbance specmun with in- creasing Nd content. The XRD and XPS results confirmed that Nd ions successfully replaced Cd atoms and were incorporated into the crystal lattice of CdTe. SEM and TEM images indicated spherical structure and high crystallinity. Even at a very low Nd/CdTe molar ratio of 2 mol.%, Nd doping could greatly enhance the photocatalytic activity of CdTe. The photocatalytic activity of Nd-doped CdTe nanoparticles was evaluated by monitoring the decolorization of RRed 43 in aqueous solution under visible-light irradiation. The color removal efficiency of Nd0.08Cd0.9eYe and pure CdTe were 83.14% and 14.32% after 100 min of treatment, respectively. Among different amounts of the doping agent, 8 tool.% Nd indicated the highest decolorization. The presence of radical scavengers such as CF, CO3-, SO4〉, and huthanol was found to reduce the decolorization efficiency.
基金supported by the National Natural Science Foundation of China(No61066006)the Scientific Research Foundation of Guangxi University(NoXBZ110359)
文摘An aqueous synthetic route has been developed for the preparation of mercaptosuccinic acid（MSA）-capped CdTe quantum dots （QDs） using TeO_2 as tellurium source and sodium borohydride as reductant.The size and the emission color of CdTe QDs can be tuned by varying the reflux time.The obtained QDs were characterized by photoluminescence（PL） spectroscopy,X-ray powder diffraction（XRD） and high-resolution transmission electron microscopy（HRTEM）.The results show that the CdTe QDs were of zinc-blende crystal structure in a sphere-like shape.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.52104335,51874195 and 52074179)the Shanghai“Super Postdoctoral”Incentive Plan(No.2020194).
文摘Te treatment is an effective method for modifying sulfide inclusions,and MnTe precipitation has an important effect on thermal brittleness and steel corrosion resistance.In most actual industrial applications of Te treatment,MnTe precipitation is unexpected.The critical precipitation behavior of MnTe inclusions was investigated through scanning electron microscopy,transmission electron microscopy,machine learning,and first-principles calculation.MnTe preferentially precipitated at the container mouth for sphere-like sulfides and at the interface between MnS grain boundaries and steel matrix for rod-like sulfides.The MnS/MnTe interface was semicoherent.A composition transition zone with a rock-salt structure exhibiting periodic changes existed to maintain the semicoherent interface.The critical precipitation behavior of MnTe inclusions in resulfurized steels involved three stages at varying temperatures.First,Mn(S,Te)precipitated during solidification.Second,MnTe with a rock-salt structure precipitated from Mn(S,Te).Third,MnTe with a hexagonal NiAs structure transformed from the rock-salt structure.The solubility of Te in MnS decreased with decreasing temperature.The critical precipitation behavior of MnTe inclusions in resulfurized steels was related to the MnS precipitation temperature.With the increase in MnS precipitation temperature,the critical Te/S weight ratio decreased.In consideration of the cost-effectiveness of Te addition for industrial production,the Te content in resulfurized steels should be controlled in accordance with MnS precipitation temperature and S content.
基金Project supported by the National Key Research and Development Program of China(Grant No.2019YFA0704900)the National Natural Science Foundation of China(Grant No.52171221)。
文摘Materials with both large magnetocaloric response and high thermoelectric performance are of vital importance for all-solid-state thermoelectromagnetic cooling.These two properties,however,hardly coexist in single phase materials except previously reported hexagonal Cr_(1-x)Te half metal where a relatively high magnetic entropy change(-△S_(M))of~2.4 J·kg^(-1)·K^(-1)@5 T and a moderate thermoelectric figure of merit(ZT)of~1.2×10^(-2)@300 K are simultaneously recorded.Herein we aim to increase the thermoelectric performance of Cr_(1-x)Te by compositing with semiconducting Ag_(2)Te.It is discovered that the in-situ synthesis of Cr_(1-x)Te/Ag_(2)Te composites by reacting their constitute elements above melting temperatures is unsuccessful because of strong phase competition.Specifically,at elevated temperatures(T>800 K),Cr_(1-x)Te has a much lower deformation energy than Ag_(2)Te and tends to become more Cr-deficient by capturing Te from Ag_(2)Te.Therefore,Ag is insufficiently reacted and as a metal it deteriorates ZT.We then rationalize the synthesis of Cr_(1-x)Te/Ag_(2)Te composites by ex-situ mix of the pre-prepared Cr_(1-x)Te and Ag_(2)Te binary compounds followed by densification at a low sintering temperature of 573 K under a pressure of 3.5 GPa.We show that by compositing with 7 mol%Ag_(2)Te,the Seebeck coefficient of Cr_(1-x)Te is largely increased while the lattice thermal conductivity is considerably reduced,leading to 72%improvement of ZT.By comparison,-△S_(M)is only slightly reduced by 10%in the composite.Our work demonstrates the potential of Cr_(1-x)Te/Ag_(2)Te composites for thermoelectromagnetic cooling.
基金supported by the National Natural Science Foundation of China(No.21972124,22102105)a project funded by the Priority Academic Program Development of Jiangsu Higher Education InstitutionL.Feng also thanks the support of the Six Talent Peaks Project of Jiangsu Province(XCL-070-2018).
文摘Low carbon alcohol fuels electrolysis under ambient conditions is promising for green hydrogen generation instead of the traditional alcohol fuels steam reforming technique,and highly efficient bifunctional catalysts for membrane electrode fabrication are required to drive the electrolysis reactions.Herein,the efficient catalytic promotion effect of a novel catalyst promoter,CoTe,on Pt is demonstrated for low carbon alcohol fuels of methanol and ethanol electrolysis for hydrogen generation.Experimental and density functional theory calculation results indicate that the optimized electronic structure of Pt–CoTe/C resulting from the synergetic effect between Pt and CoTe further regulates the adsorption energies of CO and H*that enhances the catalytic ability for methanol and ethanol electrolysis.Moreover,the good water activation ability of CoTe and the strong electronic effect of Pt and CoTe increased the tolerance ability to the poisoning species as demonstrated by the CO-stripping technique.The high catalytic kinetics and stability,as well as the promotion effect,were also carefully discussed.Specifically,71.9%and 75.5%of the initial peak current density was maintained after 1000 CV cycles in acid electrolyte for methanol and ethanol oxidation;and a low overpotential of 30 and 35 mV was required to drive the hydrogen evolution reaction in methanol and ethanol solution at the current density of 10 mA cm^(-2).In the two-electrode system for alcohol fuels electrolysis,using the optimal Pt–CoTe/C catalyst as bi-functional catalysts,the cell potential of 0.66 V(0.67 V)was required to achieve 10 mA cm^(-2) for methanol(ethanol)electrolysis,much smaller than that of water electrolysis(1.76 V).The current study offers a novel platform for hydrogen generation via low carbon alcohol fuel electrolysis,and the result is helpful to the catalysis mechanism understanding of Pt assisted by the novel promoter.
基金supported by the Independent Research and Development project of State Key Laboratory of Green Building in Western China(No.LSKF202011)the Local Funding Project for Scientific and Technological Development Guided by the Central Government(No.YDZJSX2021A022)+1 种基金the National Key Research and Development Program of China(No.2018YFD1100701-05)and the College Students’Innovative Entrepreneurial Training Plan Program of Shanxi Province(NO.20210088).
文摘Photovoltaic(PV)windows have received more and more attention in recent years since their active energy-saving advantages.Considering the surface covered with solar cell modules,the indoor daylight environment of PV windows is obviously different with clear glass windows.However,despite many scholars have studied the indoor daylight environment of PV windows,there few investigations study it from the perspective of human subjective visual perception.In this paper,the indoor daylight environment and human visual comfort of building with Cadmium Telluride Photovoltaic(CdTe-PV)window were investigated.Firstly,the parameters of indoor daylight environment and subjective questionnaires in rooms with CdTe-PV window and clear glass window were analyzed respectively.On the basis of this,combined with indoor working surface illuminance and results of subjective questionnaires,the daylight illuminance threshold of human visual comfort was investigated by the method of Mean Bias Degree(MBD).Finally,an evaluation model for indoor daylight environment of buildings with CdTe-PV window was developed by Fuzzy Comprehensive Evaluation Method.The results showed that the working surface illuminance of CdTe-PV window was lower than that of clear glass room,the CCT of different windows room had a minor gap and the CdTe-PV window room was closer to the recommended range that was 3300-5000K.As for CRI,both the CdTe-PV window room and the clear glass room could meet the visual comfort requirements of office staff.Furthermore,it was found that the requirement of human visual comfort was met when indoor working surface illuminance varies between 500-2200lx in the room with CdTe-PV window.At last,according to the comprehensive evaluation model proposed in this paper,it was found that the indoor daylight environment of buildings with CdTe-PV window was excellent in the present experiment.
