利用雷达强回波45 dBZ高度和降雹日08时月平均零度层高度,对1991—2003年宝鸡雷达站观测的165 d 231块对流云数值拟合,得出了识别冰雹云的指标:处于发展中的对流云,雷达强回波45 dBZ高度大于或等于多年降雹日08时零度层月平均值的2.9 km...利用雷达强回波45 dBZ高度和降雹日08时月平均零度层高度,对1991—2003年宝鸡雷达站观测的165 d 231块对流云数值拟合,得出了识别冰雹云的指标:处于发展中的对流云,雷达强回波45 dBZ高度大于或等于多年降雹日08时零度层月平均值的2.9 km,将有冰雹酝酿形成。对降雹造成灾害的雷达回波分析表明:雷达强回波的45 dBZ平均底部越高、提前识别的时间越长,顶部越高距离降雹时间越短,冰雹的形成是雷达强回波从云体的中部开始向上下扩展而成。该识别冰雹云方法对单体降雹平均提前识别12 m in,而对超级单体平均提前识别18 m in,对多单体、飑线中超级单体的降雹具有提前预警的作用,平均提前预警时间22 m in。展开更多
A 58-year-old man presented with the chief complaint of abdominal bloating and was incidentally found to have a liver tumor.As diagnostic imaging studies could not rule out malignancy,the patient underwent partial res...A 58-year-old man presented with the chief complaint of abdominal bloating and was incidentally found to have a liver tumor.As diagnostic imaging studies could not rule out malignancy,the patient underwent partial resection of segment 3 of the liver.The lesion pathologically showed eosinophilic proliferation,in addition to immunohistochemical positivity for human melanoma black 45 and Melan-A,thereby leading to the diagnosis of a hepatic perivascular epithelioid cell tumor(PEComa).A PEComa arising from the liver is relatively rare.Moreover,the name ‘PEComa' has not yet been widely recognized,and the same disease entity has been called epithelioid angiomyolipoma(EAML),further diminishing the recognition of PEComa.In addition,PEComa imaging findings mimic those of malignant liver tumors,and clinically,this tumor tends to enlarge.Therefore,a PEComa is difficult to diagnose.We conducted a systematic review of PEComa and EAML cases and discuss the results,including findings useful for differentiating perivascular epithelioid cell tumors from malignant liver tumors.展开更多
AIM: To improve the clinical diagnosis and recognition of hepatic epithelioid angiomyolipoma(HEAML).METHODS: Four cases of primary HEAML were confirmed based on the pathology archive system in our hospital from Januar...AIM: To improve the clinical diagnosis and recognition of hepatic epithelioid angiomyolipoma(HEAML).METHODS: Four cases of primary HEAML were confirmed based on the pathology archive system in our hospital from January 2009 to November 2015. The general state, clinical symptoms, imaging manifestations, histological results and immunohistochemistry of these patients were retrospectively reviewed and analyzed. Studies of HEAML published in the last 15 years were collected from Pub Med and MEDLINE to summarize the clinical symptoms, imaging characteristics, pathological features and management of HEAML.RESULTS: Four cases of primary HEAML were retrieved from our archives. These included three female patients and one male patient, with a mean age of 41.8 ± 11.5 years(ranging from 31 to 56 years). The meantumor size was 7.3 ± 5.5 cm(ranging from 3.0 to 15 cm). In the contrast-enhanced imaging, the tumor was obviously enhanced in the arterial phase, but enhanced continuously or exhibited a slow-density masse during the venous and delayed phases. Histologically, the tumors mainly consisted of epithelioid cells that comprised approximately 95% of the total neoplastic mass. Although no metastases occurred in our patients, pathological studies revealed necrosis, mitotic figures and liver invasion in two patients, which indicates aggressive behavior. Immunohistochemical staining revealed that human melanoma black 45(HMB-45) and Melan-A were positive in 4 cases. We only identified 81 cases with primary HEAML, including our present patients, from 26 articles available from Pub Med and MEDLINE. The majority of the papers were published as case reports. Only 5(5/75, 6%) cases were associated with tuberous sclerosis complex(TSC). More than half(35/66) were discovered incidentally upon physical examination. Approximately 65%(22/34) of the patients were misdiagnosed with HCC or other tumors before surgery. Approximately 10%(8/81) of the patients with HEAML had recurrence or metastasis after surgery, which was a very high and ala展开更多
The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically inves...The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically investigated. The high temperature friction and wear behavior of the cladding coating and substrate sliding against GCr15 ball under different loads was systematically evaluated. It was found that the coating has homogenous and fine microstructure consisting of γ（Ni） solid solution, a considerable amount of network Ni-Ni3 B eutectics, m^23C6 with the floret-shape structure and Cr B with the dark spot-shape structure uniformly distributing in interdendritic eutectics. The microhardness of the coating is about 2.6 times as much as that of the substrate. The coating produces higher friction values than the substrate under the same load condition, but the friction process on the coating keeps relatively stable. Wear rates of the coating are about 1/6.2 of that of the substrate under the higher load（300 g）. Wear mechanism of the substrate includes adhesion wear, abrasive wear, severe plastic deformation and oxidation wear, while that of the coating is merely a combination of mild abrasive wear and moderate oxidation wear.展开更多
In order to simulate thermal strains, thermal stresses, residual stresses and microstructure of the steel during gas quenching by means of the numerical method, it is necessary to obtain an accurate boundary condition...In order to simulate thermal strains, thermal stresses, residual stresses and microstructure of the steel during gas quenching by means of the numerical method, it is necessary to obtain an accurate boundary condition of temperature field. The surface heat transfer coefficient is a key parameter. The explicit finite difference method, nonlinear estimation method and the experimental relation between temperature and time during gas quenching have been used to solve the inverse problem of heat conduction. The relationship between surface temperature and surface heat transfer coefficient of a cylinder has been given. The nonlinear surface heat transfer coefficients include the coupled effects between martensitic phase transformation and temperature.展开更多
FeNiCoCrTi0.5 coatings with different process parameters were fabricated by laser cladding. The macro-morphology, phase, microstructure, hardness, and wear resistance of each coating were studied. The smoothness and d...FeNiCoCrTi0.5 coatings with different process parameters were fabricated by laser cladding. The macro-morphology, phase, microstructure, hardness, and wear resistance of each coating were studied. The smoothness and dilution rate of the FeNiCoCrTi0.5 coating generally increased with the increase of specific energy(Es), which is the laser irradiation energy received by a unit area. FeNiCoCrTi0.5 coatings at different parameters had bcc, fcc, and Ti-rich phases as well as equiaxed, dendritic, and columnar structures. When Es increased, the size of each structure increased and the distribution area of the columnar and dendritic structures changed. The prepared FeNiCoCrTi0.5 coating with the Es of 72.22 J·mm-2 had the highest hardness and the best wear resistance, the highest hardness of the coating reached HV 498.37, which is twice the substrate hardness. The average hardness of the FeNiCoCrTi0.5 coating with the Es of 72.22 J·mm-2 was 15.8% higher than the lowest average hardness of the coating with the Es of 108.33 J·mm-2. The worn surface morphologies indicate that the FeNiCoCrTi0.5 coatings exhibited abrasive wear.展开更多
文摘利用雷达强回波45 dBZ高度和降雹日08时月平均零度层高度,对1991—2003年宝鸡雷达站观测的165 d 231块对流云数值拟合,得出了识别冰雹云的指标:处于发展中的对流云,雷达强回波45 dBZ高度大于或等于多年降雹日08时零度层月平均值的2.9 km,将有冰雹酝酿形成。对降雹造成灾害的雷达回波分析表明:雷达强回波的45 dBZ平均底部越高、提前识别的时间越长,顶部越高距离降雹时间越短,冰雹的形成是雷达强回波从云体的中部开始向上下扩展而成。该识别冰雹云方法对单体降雹平均提前识别12 m in,而对超级单体平均提前识别18 m in,对多单体、飑线中超级单体的降雹具有提前预警的作用,平均提前预警时间22 m in。
文摘A 58-year-old man presented with the chief complaint of abdominal bloating and was incidentally found to have a liver tumor.As diagnostic imaging studies could not rule out malignancy,the patient underwent partial resection of segment 3 of the liver.The lesion pathologically showed eosinophilic proliferation,in addition to immunohistochemical positivity for human melanoma black 45 and Melan-A,thereby leading to the diagnosis of a hepatic perivascular epithelioid cell tumor(PEComa).A PEComa arising from the liver is relatively rare.Moreover,the name ‘PEComa' has not yet been widely recognized,and the same disease entity has been called epithelioid angiomyolipoma(EAML),further diminishing the recognition of PEComa.In addition,PEComa imaging findings mimic those of malignant liver tumors,and clinically,this tumor tends to enlarge.Therefore,a PEComa is difficult to diagnose.We conducted a systematic review of PEComa and EAML cases and discuss the results,including findings useful for differentiating perivascular epithelioid cell tumors from malignant liver tumors.
文摘AIM: To improve the clinical diagnosis and recognition of hepatic epithelioid angiomyolipoma(HEAML).METHODS: Four cases of primary HEAML were confirmed based on the pathology archive system in our hospital from January 2009 to November 2015. The general state, clinical symptoms, imaging manifestations, histological results and immunohistochemistry of these patients were retrospectively reviewed and analyzed. Studies of HEAML published in the last 15 years were collected from Pub Med and MEDLINE to summarize the clinical symptoms, imaging characteristics, pathological features and management of HEAML.RESULTS: Four cases of primary HEAML were retrieved from our archives. These included three female patients and one male patient, with a mean age of 41.8 ± 11.5 years(ranging from 31 to 56 years). The meantumor size was 7.3 ± 5.5 cm(ranging from 3.0 to 15 cm). In the contrast-enhanced imaging, the tumor was obviously enhanced in the arterial phase, but enhanced continuously or exhibited a slow-density masse during the venous and delayed phases. Histologically, the tumors mainly consisted of epithelioid cells that comprised approximately 95% of the total neoplastic mass. Although no metastases occurred in our patients, pathological studies revealed necrosis, mitotic figures and liver invasion in two patients, which indicates aggressive behavior. Immunohistochemical staining revealed that human melanoma black 45(HMB-45) and Melan-A were positive in 4 cases. We only identified 81 cases with primary HEAML, including our present patients, from 26 articles available from Pub Med and MEDLINE. The majority of the papers were published as case reports. Only 5(5/75, 6%) cases were associated with tuberous sclerosis complex(TSC). More than half(35/66) were discovered incidentally upon physical examination. Approximately 65%(22/34) of the patients were misdiagnosed with HCC or other tumors before surgery. Approximately 10%(8/81) of the patients with HEAML had recurrence or metastasis after surgery, which was a very high and ala
基金Project(2012AA040210)supported by the National High-Tech Research and Development Program of ChinaProject(510-C10293)supported by the Central Finance Special Fund to Support the Local University,ChinaProject(2010A090200048)supported by the Key Project of Industry,Education,Research of Guangdong Province and Ministry of Education,China
文摘The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically investigated. The high temperature friction and wear behavior of the cladding coating and substrate sliding against GCr15 ball under different loads was systematically evaluated. It was found that the coating has homogenous and fine microstructure consisting of γ（Ni） solid solution, a considerable amount of network Ni-Ni3 B eutectics, m^23C6 with the floret-shape structure and Cr B with the dark spot-shape structure uniformly distributing in interdendritic eutectics. The microhardness of the coating is about 2.6 times as much as that of the substrate. The coating produces higher friction values than the substrate under the same load condition, but the friction process on the coating keeps relatively stable. Wear rates of the coating are about 1/6.2 of that of the substrate under the higher load（300 g）. Wear mechanism of the substrate includes adhesion wear, abrasive wear, severe plastic deformation and oxidation wear, while that of the coating is merely a combination of mild abrasive wear and moderate oxidation wear.
基金This work has been supported by the National Natural Science Foundation of China (10162002) and Foundation for University Key Teacher by the Ministry of Education and The Yunnan Foundation of Natural Science (1999A0023M).
文摘In order to simulate thermal strains, thermal stresses, residual stresses and microstructure of the steel during gas quenching by means of the numerical method, it is necessary to obtain an accurate boundary condition of temperature field. The surface heat transfer coefficient is a key parameter. The explicit finite difference method, nonlinear estimation method and the experimental relation between temperature and time during gas quenching have been used to solve the inverse problem of heat conduction. The relationship between surface temperature and surface heat transfer coefficient of a cylinder has been given. The nonlinear surface heat transfer coefficients include the coupled effects between martensitic phase transformation and temperature.
基金This study was supported by the Youth Program of National Natural Science Foundation of China(No.51605473)the National Key R&D Program of China(No.2018YFB1105801).
文摘FeNiCoCrTi0.5 coatings with different process parameters were fabricated by laser cladding. The macro-morphology, phase, microstructure, hardness, and wear resistance of each coating were studied. The smoothness and dilution rate of the FeNiCoCrTi0.5 coating generally increased with the increase of specific energy(Es), which is the laser irradiation energy received by a unit area. FeNiCoCrTi0.5 coatings at different parameters had bcc, fcc, and Ti-rich phases as well as equiaxed, dendritic, and columnar structures. When Es increased, the size of each structure increased and the distribution area of the columnar and dendritic structures changed. The prepared FeNiCoCrTi0.5 coating with the Es of 72.22 J·mm-2 had the highest hardness and the best wear resistance, the highest hardness of the coating reached HV 498.37, which is twice the substrate hardness. The average hardness of the FeNiCoCrTi0.5 coating with the Es of 72.22 J·mm-2 was 15.8% higher than the lowest average hardness of the coating with the Es of 108.33 J·mm-2. The worn surface morphologies indicate that the FeNiCoCrTi0.5 coatings exhibited abrasive wear.
