Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance(me) vibration is induced and could lead to sub?synchronous vibration accidents for high?speed turbocharger(TC). Ther...Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance(me) vibration is induced and could lead to sub?synchronous vibration accidents for high?speed turbocharger(TC). There are very few research works that focus on the magnitude e ects on such induced unbalance vibration. In this paper, a finite element model(FEM) is developed to characterize a realistic automotive TC rotor with floating ring bearings(FRBs). The nonlinear dynamic responses of the TC rotor system with di erent levels of induced unbalance magni?tude in compressor and turbine wheels are calculated. From the results of waterfall and response spectral intensity plots, the bifurcation and instability phenomena depend on unbalance magnitude during the startup of TC. The sub?synchronous component 0.12× caused rotor unstable is the dominant frequency for small induced unbalance. The nonlinear e ects of induced unbalance in the turbine wheel is obvious stronger than the compressor wheel. As the unbalance magnitude increases from 0.05 gbration 1·mm to 0.2 g·mm, the vibration component changes from mainly 0.12× to synchronous vi×. When unbalance increases continuously, the rotor vibration response amplitude is rapidly growing and the 1× caused by the large unbalance excitation becomes the dominant frequency. A suitable un?balance magnitude of turbine wheel and compressor wheel for the high?speed TC rotor with FRBs is proposed: the value of induced un?balance magnitude should be kept around 0.2 g·mm.展开更多
Wind-tunnel tests of a large-scale sectional model with synchronous measurements of force and vibration responses were carried out to investigate the nonlinear behaviors of vertical vortex-induced forces （VIFs） on t...Wind-tunnel tests of a large-scale sectional model with synchronous measurements of force and vibration responses were carried out to investigate the nonlinear behaviors of vertical vortex-induced forces （VIFs） on three typical box decks （i.e., fully closed box, centrally slotted box, and semi-closed box）. The mechanisms of the onset, development, and self-limiting phenomenon of the vertical vortex-induced vibration （VlV） were also explored by analyzing the energy evolution of different vertical VIF components and their contributions to the vertical VIV responses. The results show that the nonlinear components of the vertical VIF often differ from deck to deck; the most important components of the vertical VIF, governing the stable amplitudes of the vertical VIV responses, are the linear and cubic components of velocity contained in the self-excited aerodynamic damping forces. The former provides a constant negative damping ratio to the vibration system and is thus the essential power driving the development of the VIV amplitude, while the latter provides a positive damping ratio proportional to the square of the vibration velocity and is actually the inherent factor making the VIV amplitude self-limiting. On these bases, a universal simplified nonlinear mathematical model of the vertical VIF on box decks of bridges is presented and verified in this paper; it can be used to predict the stable amplitudes of the vertical VIV of long-span bridges with satisfactory accuracy.展开更多
Two-level voltage source inverters with pulse width modulation(PWM)generate multiple carrier harmonics,thereby exciting high-frequency noise from the motor.Based on a special dual-branch three-phase permanent magnet s...Two-level voltage source inverters with pulse width modulation(PWM)generate multiple carrier harmonics,thereby exciting high-frequency noise from the motor.Based on a special dual-branch three-phase permanent magnet synchronous motor(PMSM),a method that utilizes a known modified space vector PWM technique is proposed.This method is able to suppress unpleasant high-frequency vibration noise as well as acoustic noise more effectively than other methods.Vibration noise near the twice carrier frequency is eliminated,and PWM vibration noise around the carrier frequency is also reduced.In particular,vibration and acoustic noise at the twice carrier frequency are eliminated using a carrier phase-shift of 0.5πand the special winding structure of the dual-branch PMSM.The effectiveness of the proposed method is confirmed using detailed experimental results.展开更多
基金National Natural Science Foundation of China(Grant Nos.51575176,11672106,51775030,51875196)Youth Innovative Talents of Hunan Province of China(Grant No.2015RS4043)
文摘Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance(me) vibration is induced and could lead to sub?synchronous vibration accidents for high?speed turbocharger(TC). There are very few research works that focus on the magnitude e ects on such induced unbalance vibration. In this paper, a finite element model(FEM) is developed to characterize a realistic automotive TC rotor with floating ring bearings(FRBs). The nonlinear dynamic responses of the TC rotor system with di erent levels of induced unbalance magni?tude in compressor and turbine wheels are calculated. From the results of waterfall and response spectral intensity plots, the bifurcation and instability phenomena depend on unbalance magnitude during the startup of TC. The sub?synchronous component 0.12× caused rotor unstable is the dominant frequency for small induced unbalance. The nonlinear e ects of induced unbalance in the turbine wheel is obvious stronger than the compressor wheel. As the unbalance magnitude increases from 0.05 gbration 1·mm to 0.2 g·mm, the vibration component changes from mainly 0.12× to synchronous vi×. When unbalance increases continuously, the rotor vibration response amplitude is rapidly growing and the 1× caused by the large unbalance excitation becomes the dominant frequency. A suitable un?balance magnitude of turbine wheel and compressor wheel for the high?speed TC rotor with FRBs is proposed: the value of induced un?balance magnitude should be kept around 0.2 g·mm.
基金The work described in this paper was jointly supported by the National Natural Science Foundation of China （51478360, 51323013, and 50978204）.
文摘Wind-tunnel tests of a large-scale sectional model with synchronous measurements of force and vibration responses were carried out to investigate the nonlinear behaviors of vertical vortex-induced forces （VIFs） on three typical box decks （i.e., fully closed box, centrally slotted box, and semi-closed box）. The mechanisms of the onset, development, and self-limiting phenomenon of the vertical vortex-induced vibration （VlV） were also explored by analyzing the energy evolution of different vertical VIF components and their contributions to the vertical VIV responses. The results show that the nonlinear components of the vertical VIF often differ from deck to deck; the most important components of the vertical VIF, governing the stable amplitudes of the vertical VIV responses, are the linear and cubic components of velocity contained in the self-excited aerodynamic damping forces. The former provides a constant negative damping ratio to the vibration system and is thus the essential power driving the development of the VIV amplitude, while the latter provides a positive damping ratio proportional to the square of the vibration velocity and is actually the inherent factor making the VIV amplitude self-limiting. On these bases, a universal simplified nonlinear mathematical model of the vertical VIF on box decks of bridges is presented and verified in this paper; it can be used to predict the stable amplitudes of the vertical VIV of long-span bridges with satisfactory accuracy.
基金Supported by the National Natural Science Foundation of China(51577036,51437004).
文摘Two-level voltage source inverters with pulse width modulation(PWM)generate multiple carrier harmonics,thereby exciting high-frequency noise from the motor.Based on a special dual-branch three-phase permanent magnet synchronous motor(PMSM),a method that utilizes a known modified space vector PWM technique is proposed.This method is able to suppress unpleasant high-frequency vibration noise as well as acoustic noise more effectively than other methods.Vibration noise near the twice carrier frequency is eliminated,and PWM vibration noise around the carrier frequency is also reduced.In particular,vibration and acoustic noise at the twice carrier frequency are eliminated using a carrier phase-shift of 0.5πand the special winding structure of the dual-branch PMSM.The effectiveness of the proposed method is confirmed using detailed experimental results.
