The Songliao basin （SB） is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyrodastic and ep...The Songliao basin （SB） is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyrodastic and epiclastic rocks. The volcanic rocks, dating from 110 Ma to 130 Ma, are of geochemically active continental margin type. Fast northward migration of the SB block occurred during the major episodes of the volcanism inferred from their paleomagnetic information. The upper one of the basin fill is dominated by non-marine sag-style sedimentary sequence of silicidastics and minor carbonates. The basin center shifted westwards from the early to late Cretaceous revealed by the GGT seismic velocity structure suggesting dynamic change in the basin evolution. Thus, a superposed basin model is proposed. Evolution of the SB involves three periods including （1） Alptian and pre- Aptian： a retroarc basin and range system of Andes type related to Mongolia-Okhotsk collisional belt （MOCB）; （2） Albian to Companian： a sag-like strike-slip basin under transtension related to oblique subduction of the Pacific plate along the eastern margin of the Eurasian plate; （3） since Maastrichtian： a tectonic inverse basin under compression related to normal subduction of the Pacific plate under the Eurasian plate, characterized by overthrust, westward migration of the depocenter and eastward uplifting of the basin margin.展开更多
The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-s...The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-striking major extensional faults that controlled the formation of Paleogene basins. Recent petroleum exploration indicates that Cenozoic structural activities of the Tan-Lu fault system have directly or indirectly affected oil and gas distribution offshore the Bohai Sea. As part of a deep fault zone the Tan-Lu fault zone has been activated since the Oligocene,and obviously affected the tectonic evolution of offshore Bohai basins since then. The formation of Paleogene rift basins offshore the Bohai Sea has utilized the pre-existing structural elements of the Tan-Lu fault zone that developed in the late Mesozoic.展开更多
There is a massive amount of geomorphic evidence for active tectonics in the Longmen Shan at the eastern margin of the Tibetan plateau. We have surveyed some typical geomorphic markers including the Wenchuan-Maowen, B...There is a massive amount of geomorphic evidence for active tectonics in the Longmen Shan at the eastern margin of the Tibetan plateau. We have surveyed some typical geomorphic markers including the Wenchuan-Maowen, Beichuan-Yingxiu and Pengxian-Guanxian faults, terrace offsets, scarps, fault-controlled saddles, dextral shutter ridges, dextral channel offsets, graben, shatter belts, and pull-apart basins. Electron spin resonance （ESR） and thermoluminescence（TL） ages were obtained using silty sand taken from below the surface of the sediments. According to these data, we calculated the rates of thrusting and strike-slip, and the results indicate that Cenozoic tectonic shortening at the plateau margin is minor with the rate of thrusting less than 1.10 mm/a and the rate of strike-slipping less than 1.46 mm/a. The Longmen Shan is a zone of NNE-trending dextral shear with slip-dip ratio of 6：1-1.3：1. From NW to SE, the thrust component becomes smaller, whereas the strike-slip component becomes larger.展开更多
Based on technical processing of high-resolution SPOT images and aerophotos, detailed mapping of offset landforms in combination with field examination and displacement measurement, and dating of offset geomorphic sur...Based on technical processing of high-resolution SPOT images and aerophotos, detailed mapping of offset landforms in combination with field examination and displacement measurement, and dating of offset geomorphic surfaces by using carbon fourteen (14C), cos- mogenic nuclides (10Be+26Al) and thermoluminescence (TL) methods, the Holocene sinistral slip rates on different segments of the Altyn Tagh Fault (ATF) are obtained. The slip rates reach 17.5 ±2 mm/a on the central and western segments west of Aksay Town, 11±3.5 mm/a on the Subei-Shibaocheng segment, 4.8±1.0 mm/a on the Sulehe segment and only 2.2±0.2 mm/a on the Kuantanshan segment, an easternmost segment of the ATF. The sudden change points for loss of sinistral slip rates are located at the Subei, Shibaocheng and Shulehe triple junctions where NW-trending active thrust faults splay from the ATF and propagate southeastward. Slip vector analyses indicate that the loss of the sinistral slip rates from west to east across a triple junction has structurally transformed into local crustal shortening perpendicular to the active thrust faults and strong uplifting of the thrust sheets to form the NW-trending Danghe Nanshan, Daxueshan and Qilianshan Ranges. Therefore, the eastward extrusion of the northern Qing- hai-Tibetan Plateau is limited and this is in accord with “the imbricated thrusting transforma- tion-limited extrusion model”.展开更多
The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is impo...The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.展开更多
The Louzidian normal fault occurs as the eastern detachment fault of the Kalaqin metamorphic core complex. Field observations and microstructural analyses reveal that the Louzidian-Dachengzi ductile shear zone develop...The Louzidian normal fault occurs as the eastern detachment fault of the Kalaqin metamorphic core complex. Field observations and microstructural analyses reveal that the Louzidian-Dachengzi ductile shear zone developed in its lower-plate was genetically related to sinistral strike-slips and extensional faulting. Two samples from this ductile shear zone yield 40Ar-39Ar plateau ages of 133 Ma (Bi) and 126 Ma (Kp), which are concordant with their isochron ages. The plateau age of 133 Ma (Bi) records the formation age of the ductile shear zone. The inconsistent relationship between the earlier strike-slip ductile shear zone and the later normal fault makes the Kalaqin Quasi-metamorphic core complex distinctive from Cordil-leran nietamorphic core complex. These ages provide important geochronological data for putting constraints on the formation age and genesis of such ductile shear zones.展开更多
Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately un...Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately uniform strike slip rate strongly supports the clockwise rotation model of the southeastern Tibetan crust. By approximating the geometry of the arc-shaped Xianshuihe-Xiaojiang fault system as a portion of a small circle on a spherical Earth, the 15±2 mm/a strike slip rate corresponds to clockwise rotation of the Southeastern Tibetan Block at the （5.2±0.7）×10^-7 deg/a angular velocity around the pole （21°N, 88°E） relative to the Northeast Tibetan Block. The approximately uniform strike slip rate along the Xianshuihe-Xiaojiang fault system also implies that the Longmeushan thrust zone is not active, or at least its activity has been very weak since the Late Quaternary. Moreover, the total offset along the Xiaushuihe-Xiaojiang fault system suggests that the lateral extrusion of the Southeastern Tibetan Block relative to Northeastern Tibetan Block is about 160 km and 200-240 km relative to the Tarim-North China block. This amount of lateral extrusion of the Tibetan crust should have accommodated about 13-24% convergence between India and Eurasia based on mass balance calculations. Assuming that the slip rate of 15±2 mm/a is constant throughout the entire history of the Xianshuihe-Xiaojiang fault system, 11±1.5 Ma is needed for the Xianshuihe-Xiaojiang fault system to attain the 160 km of total offset. This implies that left-slip faulting on the Xianshuihe-Xiaojiang fault system might start at 11±1.5 Ma.展开更多
Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of ...Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, ＂X＂ type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that： （1） The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; （2） As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; （3） Sequential slip may have played an important role in forming conjugate fault intersections; （4） The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active ＂X＂ type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.展开更多
文摘The Songliao basin （SB） is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyrodastic and epiclastic rocks. The volcanic rocks, dating from 110 Ma to 130 Ma, are of geochemically active continental margin type. Fast northward migration of the SB block occurred during the major episodes of the volcanism inferred from their paleomagnetic information. The upper one of the basin fill is dominated by non-marine sag-style sedimentary sequence of silicidastics and minor carbonates. The basin center shifted westwards from the early to late Cretaceous revealed by the GGT seismic velocity structure suggesting dynamic change in the basin evolution. Thus, a superposed basin model is proposed. Evolution of the SB involves three periods including （1） Alptian and pre- Aptian： a retroarc basin and range system of Andes type related to Mongolia-Okhotsk collisional belt （MOCB）; （2） Albian to Companian： a sag-like strike-slip basin under transtension related to oblique subduction of the Pacific plate along the eastern margin of the Eurasian plate; （3） since Maastrichtian： a tectonic inverse basin under compression related to normal subduction of the Pacific plate under the Eurasian plate, characterized by overthrust, westward migration of the depocenter and eastward uplifting of the basin margin.
基金Supported by National Natural Science Foundation of China (Grant No.40372072)National Basic Research Program of China (Grant No.2006CB202301)
文摘The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-striking major extensional faults that controlled the formation of Paleogene basins. Recent petroleum exploration indicates that Cenozoic structural activities of the Tan-Lu fault system have directly or indirectly affected oil and gas distribution offshore the Bohai Sea. As part of a deep fault zone the Tan-Lu fault zone has been activated since the Oligocene,and obviously affected the tectonic evolution of offshore Bohai basins since then. The formation of Paleogene rift basins offshore the Bohai Sea has utilized the pre-existing structural elements of the Tan-Lu fault zone that developed in the late Mesozoic.
基金This research was supported by the National Nature Foundation of China （49803031, 40372084） the Seismic Scientific United Fund （95-07-0425）+3 种基金 US National Science Foundation grant EAR-0125565 ETH Forschungskommission grant TH-4/03-01 Key Subject Program of Sichuan province Grant No. SZD0408 and the Program for the Subject of Ph.D. in Higher Education Institute, Grant No.20050616004.
文摘There is a massive amount of geomorphic evidence for active tectonics in the Longmen Shan at the eastern margin of the Tibetan plateau. We have surveyed some typical geomorphic markers including the Wenchuan-Maowen, Beichuan-Yingxiu and Pengxian-Guanxian faults, terrace offsets, scarps, fault-controlled saddles, dextral shutter ridges, dextral channel offsets, graben, shatter belts, and pull-apart basins. Electron spin resonance （ESR） and thermoluminescence（TL） ages were obtained using silty sand taken from below the surface of the sediments. According to these data, we calculated the rates of thrusting and strike-slip, and the results indicate that Cenozoic tectonic shortening at the plateau margin is minor with the rate of thrusting less than 1.10 mm/a and the rate of strike-slipping less than 1.46 mm/a. The Longmen Shan is a zone of NNE-trending dextral shear with slip-dip ratio of 6：1-1.3：1. From NW to SE, the thrust component becomes smaller, whereas the strike-slip component becomes larger.
基金zupported by the Nati onal Natural Science Foundation ofChina(Gramt No.49972070).
文摘Based on technical processing of high-resolution SPOT images and aerophotos, detailed mapping of offset landforms in combination with field examination and displacement measurement, and dating of offset geomorphic surfaces by using carbon fourteen (14C), cos- mogenic nuclides (10Be+26Al) and thermoluminescence (TL) methods, the Holocene sinistral slip rates on different segments of the Altyn Tagh Fault (ATF) are obtained. The slip rates reach 17.5 ±2 mm/a on the central and western segments west of Aksay Town, 11±3.5 mm/a on the Subei-Shibaocheng segment, 4.8±1.0 mm/a on the Sulehe segment and only 2.2±0.2 mm/a on the Kuantanshan segment, an easternmost segment of the ATF. The sudden change points for loss of sinistral slip rates are located at the Subei, Shibaocheng and Shulehe triple junctions where NW-trending active thrust faults splay from the ATF and propagate southeastward. Slip vector analyses indicate that the loss of the sinistral slip rates from west to east across a triple junction has structurally transformed into local crustal shortening perpendicular to the active thrust faults and strong uplifting of the thrust sheets to form the NW-trending Danghe Nanshan, Daxueshan and Qilianshan Ranges. Therefore, the eastward extrusion of the northern Qing- hai-Tibetan Plateau is limited and this is in accord with “the imbricated thrusting transforma- tion-limited extrusion model”.
基金supported by a project of Special Research on Land and Research Public Welfare Industry(201511029)founded by Ministry of Land and Resources of the People’s Republic of China
文摘The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.
基金This work was supported jointly by the Chinese Academy of Sciences (Grant Nos. KZCX1-07 and KZCX1-Y-03-01-05) the National Key Basic Research Project (Grant No. G1999043302).
文摘The Louzidian normal fault occurs as the eastern detachment fault of the Kalaqin metamorphic core complex. Field observations and microstructural analyses reveal that the Louzidian-Dachengzi ductile shear zone developed in its lower-plate was genetically related to sinistral strike-slips and extensional faulting. Two samples from this ductile shear zone yield 40Ar-39Ar plateau ages of 133 Ma (Bi) and 126 Ma (Kp), which are concordant with their isochron ages. The plateau age of 133 Ma (Bi) records the formation age of the ductile shear zone. The inconsistent relationship between the earlier strike-slip ductile shear zone and the later normal fault makes the Kalaqin Quasi-metamorphic core complex distinctive from Cordil-leran nietamorphic core complex. These ages provide important geochronological data for putting constraints on the formation age and genesis of such ductile shear zones.
基金supported mainly by the National Key Basic Research Program(No.2004CB418401)the National Natural Science Foundation of China(grant No.40472109)+1 种基金partly from the Joint Earthquake Science Foundation of China(grant No.105066)the SASAKAWA Scientific Grant from the Japan Science Society.
文摘Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately uniform strike slip rate strongly supports the clockwise rotation model of the southeastern Tibetan crust. By approximating the geometry of the arc-shaped Xianshuihe-Xiaojiang fault system as a portion of a small circle on a spherical Earth, the 15±2 mm/a strike slip rate corresponds to clockwise rotation of the Southeastern Tibetan Block at the （5.2±0.7）×10^-7 deg/a angular velocity around the pole （21°N, 88°E） relative to the Northeast Tibetan Block. The approximately uniform strike slip rate along the Xianshuihe-Xiaojiang fault system also implies that the Longmeushan thrust zone is not active, or at least its activity has been very weak since the Late Quaternary. Moreover, the total offset along the Xiaushuihe-Xiaojiang fault system suggests that the lateral extrusion of the Southeastern Tibetan Block relative to Northeastern Tibetan Block is about 160 km and 200-240 km relative to the Tarim-North China block. This amount of lateral extrusion of the Tibetan crust should have accommodated about 13-24% convergence between India and Eurasia based on mass balance calculations. Assuming that the slip rate of 15±2 mm/a is constant throughout the entire history of the Xianshuihe-Xiaojiang fault system, 11±1.5 Ma is needed for the Xianshuihe-Xiaojiang fault system to attain the 160 km of total offset. This implies that left-slip faulting on the Xianshuihe-Xiaojiang fault system might start at 11±1.5 Ma.
基金partly supportedby National Natural Science Foundation of China(Grant No.41472103)
文摘Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, ＂X＂ type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that： （1） The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; （2） As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; （3） Sequential slip may have played an important role in forming conjugate fault intersections; （4） The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active ＂X＂ type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.
