期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
锶铋钽铁电薄膜的溶胶-凝胶法制备过程与机制研究 被引量:3
1
作者 季惠明 李翠霞 徐廷献 《天津大学学报(自然科学与工程技术版)》 EI CAS CSCD 北大核心 2003年第6期693-696,共4页
采用可溶性无机盐为原料,利用溶胶 凝胶旋转涂覆工艺,在Si(111)/SiO2/Ti/Pt的衬底材料上制备了SrBi2Ta2O9铁电薄膜.通过SEM及XRD等微观分析手段和实验与理论研究,重点探讨了第一次涂覆溶胶膜对晶态膜的开裂情况、成核与生长情况、晶体... 采用可溶性无机盐为原料,利用溶胶 凝胶旋转涂覆工艺,在Si(111)/SiO2/Ti/Pt的衬底材料上制备了SrBi2Ta2O9铁电薄膜.通过SEM及XRD等微观分析手段和实验与理论研究,重点探讨了第一次涂覆溶胶膜对晶态膜的开裂情况、成核与生长情况、晶体取向及与衬底间的相互作用等方面的影响.制备出了致密、均匀、无开裂、晶粒发育完好,且剩余极化(2Pr)与矫顽电场强度(2Ec)分别为9.6μC/cm2与76kV/cm的铁电性能较好的薄膜,为可溶性无机盐溶液源制备SrBi2Ta2O9铁电薄膜研究打下了基础. 展开更多
关键词 锶铋钽铁电薄膜 溶胶-凝胶法 制备过程 晶态膜
下载PDF
MOD法制备SrBi_2Ta_2O_9铁电薄膜及其性能研究 被引量:1
2
作者 王东生 于涛 +3 位作者 胡安 吴迪 李爱东 李治国 《哈尔滨理工大学学报》 CAS 2002年第6期34-36,共3页
在Pt/TiO_2/SiO_2/Si衬底上,用金属有机物分解法(MOD)制备了SrBi_2Ta_2O_9(SBT)铁电薄膜.研究了SBT薄膜的晶体结构,表面形貌以及它的电学性能,结果表明SrBi_2Ta_2O_9铁电薄膜具有良好的抗疲劳特性,在经过10~9次极化反转后其剩余极化强度... 在Pt/TiO_2/SiO_2/Si衬底上,用金属有机物分解法(MOD)制备了SrBi_2Ta_2O_9(SBT)铁电薄膜.研究了SBT薄膜的晶体结构,表面形貌以及它的电学性能,结果表明SrBi_2Ta_2O_9铁电薄膜具有良好的抗疲劳特性,在经过10~9次极化反转后其剩余极化强度P_r变化不大,约为3%,并且漏电流较低,在测量电压为1V时,漏电流密度为5.73×10^-8A/cm^2. 展开更多
关键词 MoD法 制备 铁电薄膜 srbi2ta2o9薄膜 有机金属分解法
下载PDF
THE STABILITY INVESTIGATION OF FERROELECTRIC SrBi_2Ta_2O_9 THIN FILMS ANNEALED IN FORMING GAS
3
作者 T. Yu D.S. Wang +4 位作者 D. Wu A.D. Li A. Hu Z.G. Liu N.B. Ming 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2002年第1期58-60,共3页
The hysteresis loop changes of ferroelecric SrBi_2 Ta_2 O_9 (SBT) thin films(330nm) us the temperature of forming gas (5 percent hydrogen+95 percent nitrogen) annealing weremeasured when the annealing time was 1min an... The hysteresis loop changes of ferroelecric SrBi_2 Ta_2 O_9 (SBT) thin films(330nm) us the temperature of forming gas (5 percent hydrogen+95 percent nitrogen) annealing weremeasured when the annealing time was 1min and 10min. The selected annealing temperature was at 100deg C,200 deg C 250 deg C, 300 deg C, 350 deg C,400 deg C and 450 deg C, respectively. Our resultsshowed that the ferroelectric properties were easily destroyed and the leakage current changedabruptly when the SBT thin films were in their ferroelectric phase (<270 deg C). The space chargesat the grain boundary may take an important role' in absorption polarity molecular hydrogen when theSBT thin films were in the ferroelectric phase. The oxygen recovery experiments were also performedand investigated in this work. 展开更多
关键词 FERRoELECTRIC srbi_2 ta_2 o_9 thin film stability forming gas
下载PDF
层状钙钛矿结构SrBi_2Ta_2O_9铁电薄膜的微结构研究 被引量:1
4
作者 朱信华 朱滔 +4 位作者 朱健民 周舜华 李齐 刘治国 闵乃本 《人工晶体学报》 EI CAS CSCD 北大核心 2000年第S1期255-,共1页
层状钙钛矿结构SrBi2 Ta2 O9(SBT)铁电薄膜材料由于具有无疲劳特性 ,长的极化寿命和在亚微米 ( <1 0 0nm)厚度时 ,仍然具有体材料的良好电学性能 ,因而成为非挥发性铁电存储器的首选材料。SBT属于Bi系层状钙钛矿结构的铁电材料 ,其... 层状钙钛矿结构SrBi2 Ta2 O9(SBT)铁电薄膜材料由于具有无疲劳特性 ,长的极化寿命和在亚微米 ( <1 0 0nm)厚度时 ,仍然具有体材料的良好电学性能 ,因而成为非挥发性铁电存储器的首选材料。SBT属于Bi系层状钙钛矿结构的铁电材料 ,其化学通式为 (Bi2 O2 ) 2 +(Am -1BmO3 m +1) 2 -,其中A为二价元素 ,B为五价元素 ,m为c轴方向一个晶胞内连续的钙钛结构单元个数。具有铁电性的氧八面体子晶格被非铁电性的 (Bi2 O2 ) 2 +层分隔开 ,形成一种超晶格结构。近年来人们利用多种方法 (如Sol gel,MOD ,PLD等 )制备了SBT铁电薄膜 ,并对其铁电性能及疲劳特性进行了广泛的研究。迄今为止 ,人们对SBT铁电薄膜的微结构研究还比较少 ,对SBT铁电薄膜的耐疲劳机理还不清楚。我们利用高分辨电子显微术 (HRTEM)研究了SBT铁电薄膜的晶界结构 ,分析了小角晶界处的位错组态 ,确定了位错的Burgers矢量及晶界的滑移面 ,并讨论了小角晶界及位错组态对SBT铁电薄膜漏电流密度的影响。采用传统的氧化物混合法烧结制备SrBi2 Ta2 O9陶瓷靶 ,利用脉冲激光沉积法 (PLD)在Pt( 2 0 0nm) /TiO2 ( 5 0nm) /SiO2 /Si衬底上面制备SBT铁电薄膜。衬底温度为 5 5 0℃ ,沉积时间为1 5min ,膜厚 5 0 0nm。合成后的SBT铁电薄膜在氧气氛中 85 0℃下退火 展开更多
关键词 srbi_2ta_2o_9薄膜 铁电薄膜 微结构 晶界
下载PDF
Modulation of photocatalytic activity of SrBi_(2)Ta_(2)O_(9)nanosheets in NO removal by tuning facets exposure
5
作者 Nan Li Qiuhui Zhu +7 位作者 Guimei Liu Qi Zhao Haiqin Lv Mingzhe Yuan Qingguo Meng Yingtang Zhou Jingkun Xu Chuanyi Wang 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2022年第27期91-100,共10页
Photocatalysts with exposure of different crystal facets often show great differences in their photocatalytic activities due to differences in surface atomic arrangement and coordination.Thus,the actual photoreaction ... Photocatalysts with exposure of different crystal facets often show great differences in their photocatalytic activities due to differences in surface atomic arrangement and coordination.Thus,the actual photoreaction mechanism of a specific crystal facet in photocatalysis deserves to be explored.In this paper,as a case study,Sr Bi_(2)Ta_(2)O_(9)photocatalyst with preferential facet exposure was explored for the photocatalytic removal of NO at a ppb level.The efficiency of NO removal was remarkably improved by tuning the crystal exposure facet with high(200)facet exposure ratio.Optimized exposure of(200)crystal facet in Sr Bi_(2)Ta_(2)O_(9)(SBT)by thermal calcination at 800℃(SBT-800)leads to the highest NO removal activity of51%under a 300 W Xe lamp for 20 min;under visible light,SBT 800 achieves a 5-fold enhancement in NO removal efficiency compared to its counterpart,SBT-900.Active species capture experiments prove that the superoxide radical·O_(2)-is the main active species for the photocatalytic removal of NO,and surface selective deposition experiments conclude that(200)is the main electron-rich crystal plane,based on which the results of density functional theory(DFT)computation reveal the Bi O terminated nature of(001)crystal plane,where the models with both Bi O and Ta O terminated(001)planes were created and computated.Mechanistic study reveals that Sr Bi_(2)Ta_(2)O_(9)with a larger exposure of(200)facet provides more active reduction sites,thereby reducing more O_(2)to·O_(2)-,which further oxidizes the adsorbed NO to NO_(2)-/NO_(3)-.The present work underlines the role of facet tuning in the photoactivity modulation for NO removal photocatalytically. 展开更多
关键词 srbi_(2)ta_(2)o_(9) No removal Facet exposure Photocatalysis DFT computation
原文传递
Built in electric field boosted photocatalytic performance in a ferroelectric layered material SrBi_(2)Ta_(2)O_(9)with oriented facets:Charge separation and mechanism insights
6
作者 Biru Liao Xiaomin Liao +6 位作者 Huiyuan Xie Yuanchu Qin Yi Zhu Yang Yu Sen Hou Yuanming Zhang Xiaoyun Fan 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2022年第28期222-233,共12页
Antibiotics have received increasing attention due to their potential adverse effects on aquatic life and human health.How to efficiently degrade them into harmless substances is a challenging subject.Ferroelectric ma... Antibiotics have received increasing attention due to their potential adverse effects on aquatic life and human health.How to efficiently degrade them into harmless substances is a challenging subject.Ferroelectric materials with a built-in electric field can offer a strong separation ability for the photoinducedcharge pairs and are now found to be used as photocatalysts.Herein,a series of different morphologies of SrBi_(2)Ta_(2)O_(9)ferroelectric photocatalysts with high antibiotic degradation efficiency have been successfully synthesized through a molten salt method.With the addition of KCl,SrBi_(2)Ta_(2)O_(9)(SBTO 3)with exposed(001)facets shows the most excellent photocatalytic activity for decomposing tetracycline(TC)and ciprofloxacin(CIP)under visible light illumination(λ>420 nm).The rate constants of SBTO 3 for TC and CIP degradation are 1.38×10^(–1)and 4.54×10^(–2)min^(–1),which are 18 and 138 times that of the unmodified sample,respectively.The enhancement of photocatalytic performance is mainly attributed to the spontaneous polarization electric field along the[001]direction which provides a strong driven force for the separation of photoinduced charges.The KPFM results also confirm that the superior photocatalytic activity is consistent with the big large surface potential changes before and after light irradiation.The possible degradation pathways and intermediates of TC and CIP were well analyzed by DFT calculation and LC-MS.The results highlight that morphology control of the ferroelectric materials exhibits enhanced photocatalytic performance for the degradation of the antibiotic. 展开更多
关键词 srbi_(2)ta_(2)o_(9) Morphology FERRoELECTRIC Photocatalysis ANTIBIoTICS Built-in electric field
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部