Recently,the growing use of unmanned aerial vehicles(UAV)for pesticide application has been reported against a wide range of crops with promising results in East Asian countries such as Japan,South Korea and China.Thi...Recently,the growing use of unmanned aerial vehicles(UAV)for pesticide application has been reported against a wide range of crops with promising results in East Asian countries such as Japan,South Korea and China.This UAV-based application technology for agrochemicals is considered as a high efficiency alternative to the conventional manual spray operations and a low-cost choice as compared to the classical manned aerial application.However,the technology adoption rate and the designed optimal sprayer suitable for drone application for small scale farm remains at the development stage in China and also in Japan.This paper reports the current status of drone pesticide application in China and makes comparisons with its neighbor countries Japan and South Korea in terms of different UAV platforms and their implementation in plant protection for different crops.Challenges and opportunities for future development of UAV-based pesticide application technology are also discussed.展开更多
Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Sp...Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique＂ by K. Usharani and A.R. Balu published in Acta Metall. Sin.展开更多
Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,ho...Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,hover function and high spraying efficiency of UAV are urgently required to spray pesticide for crop timely and effectively,especially in dispersed plots and hilly mountains.In such situations,the current researches about UAV spray application mainly focus on studying the influence of the UAV spraying parameters on the droplet deposition,such as operation height,operation velocity and wind velocity.The deposition and distribution of pesticide droplets on crops which depends on installation position of nozzle and airflow distribution characteristics of UAV are directly related to the control effect of pesticide and crop growth in different growth periods.As a preliminary step,this study focuses on the dynamic development law and distribution characteristics of the downwash air flow for the SLK-5 six-rotor agricultural UAV.Based on compressible Reynolds-averaged Navier-Stokes(RANS)equations with an RNG k-εturbulence model and dynamic mesh technology,the efficient three-dimensional computational fluid dynamics(CFD)method was established to analyze the flow field distribution characteristics of UAV in hover.Then the unsteady interaction flow field of the wing was investigated in detail.The downwash wind speed of the marked points for the SLK-5 UAV in hover was also tested by weather tracker.It was found that the maximum velocity value of the downwash flow was close to 10 m/s;the z-direction velocity was the main body of the wind velocity in the downwash airflow,and the comparison of the wind velocity experiment test and simulation showed that the relative error was less than 12%between the experimental and simulated values of the z-direction velocity at the marked points.Then the flow characteristics of the longitudinal and cross section were analyzed in detail,the results obtained can be used as a refere展开更多
A pintle injector is advantageous for throttling a liquid rocket engine and reducing engine weight. This study ex- plores the effects of momentum ratio and Weber number at various injection conditions on spray charact...A pintle injector is advantageous for throttling a liquid rocket engine and reducing engine weight. This study ex- plores the effects of momentum ratio and Weber number at various injection conditions on spray characteristics of the pintle injector for liquid-gas propellants. A liquid sheet is injected from a center pintle nozzle and it is broken by a gas jet from an annular gap. The pressure drops of propellants, and the pintle opening distance were consi- dered as control variables; using 0.1 -1.0 as a bar for the pressure drop of the liquid injection, a 0.01-4）.2 bar for the pressure drop of gas jet and a 0.2 - 1.0 mm for the pintle opening distance. The discharge coefficient was de- creased linearly before the pintle opening distance of 0.75 mm and then, the coefficient was slightly increased. Spray images were captured by a CMOS camera with high resolution. Then, the shadow and reflected images were analyzed. Spray distributions were measured by a pattemator with an axial distance of 50 mm from a pintle tip. Finally, the spray half angles had an exponentially decreasing correlation as a momentum ratio divided by the Weber number. Also, the spray half angles from the spray distribution were underestimated compared to those measured from the captured images.展开更多
基金the grants of Special Fund for Agro-scientific Research in the Public Interest from the Ministry of Agriculture,China(201203025,201503130)International Co-operation Project“UAV chemical application technique for rice”from the Chinese Ministry of Agriculture and National Natural Science Foundation of China(31470099)+1 种基金China International Science and Technology Cooperation Project(2010DFA34570)“New Technique for Chemical Application”by Chinese State Administration of Foreign Experts Affairs(SGCAST01601710).
文摘Recently,the growing use of unmanned aerial vehicles(UAV)for pesticide application has been reported against a wide range of crops with promising results in East Asian countries such as Japan,South Korea and China.This UAV-based application technology for agrochemicals is considered as a high efficiency alternative to the conventional manual spray operations and a low-cost choice as compared to the classical manned aerial application.However,the technology adoption rate and the designed optimal sprayer suitable for drone application for small scale farm remains at the development stage in China and also in Japan.This paper reports the current status of drone pesticide application in China and makes comparisons with its neighbor countries Japan and South Korea in terms of different UAV platforms and their implementation in plant protection for different crops.Challenges and opportunities for future development of UAV-based pesticide application technology are also discussed.
文摘Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique＂ by K. Usharani and A.R. Balu published in Acta Metall. Sin.
基金acknowledge the financial support provided by the National Key Research and Development Plan of China(No.2016YFD0200702)Study on Key Techniques of Aviation Plant Protection for Rice Diseases and Insect Pests of China(No.S201729)+1 种基金Open exchange project of China-US pesticide technology Joint Research Center(No.Y2017PT32)Aviation intelligent pesticide operation system based on Beidou automatic navigation(No.S201609).
文摘Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,hover function and high spraying efficiency of UAV are urgently required to spray pesticide for crop timely and effectively,especially in dispersed plots and hilly mountains.In such situations,the current researches about UAV spray application mainly focus on studying the influence of the UAV spraying parameters on the droplet deposition,such as operation height,operation velocity and wind velocity.The deposition and distribution of pesticide droplets on crops which depends on installation position of nozzle and airflow distribution characteristics of UAV are directly related to the control effect of pesticide and crop growth in different growth periods.As a preliminary step,this study focuses on the dynamic development law and distribution characteristics of the downwash air flow for the SLK-5 six-rotor agricultural UAV.Based on compressible Reynolds-averaged Navier-Stokes(RANS)equations with an RNG k-εturbulence model and dynamic mesh technology,the efficient three-dimensional computational fluid dynamics(CFD)method was established to analyze the flow field distribution characteristics of UAV in hover.Then the unsteady interaction flow field of the wing was investigated in detail.The downwash wind speed of the marked points for the SLK-5 UAV in hover was also tested by weather tracker.It was found that the maximum velocity value of the downwash flow was close to 10 m/s;the z-direction velocity was the main body of the wind velocity in the downwash airflow,and the comparison of the wind velocity experiment test and simulation showed that the relative error was less than 12%between the experimental and simulated values of the z-direction velocity at the marked points.Then the flow characteristics of the longitudinal and cross section were analyzed in detail,the results obtained can be used as a refere
基金supported by Advanced Research Center Program(NRF-2013R1A5A1073861)through the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)contracted through Advanced Space Propulsion Research Center at Seoul National University
文摘A pintle injector is advantageous for throttling a liquid rocket engine and reducing engine weight. This study ex- plores the effects of momentum ratio and Weber number at various injection conditions on spray characteristics of the pintle injector for liquid-gas propellants. A liquid sheet is injected from a center pintle nozzle and it is broken by a gas jet from an annular gap. The pressure drops of propellants, and the pintle opening distance were consi- dered as control variables; using 0.1 -1.0 as a bar for the pressure drop of the liquid injection, a 0.01-4）.2 bar for the pressure drop of gas jet and a 0.2 - 1.0 mm for the pintle opening distance. The discharge coefficient was de- creased linearly before the pintle opening distance of 0.75 mm and then, the coefficient was slightly increased. Spray images were captured by a CMOS camera with high resolution. Then, the shadow and reflected images were analyzed. Spray distributions were measured by a pattemator with an axial distance of 50 mm from a pintle tip. Finally, the spray half angles had an exponentially decreasing correlation as a momentum ratio divided by the Weber number. Also, the spray half angles from the spray distribution were underestimated compared to those measured from the captured images.
