A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors,...A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors, such as laser pulse energy, repetition rate and argon flow rate, that influence laser-induced breakdown spectroscopy （LIBS） analytical performance are investigated in detail. Under the optimal experiment conditions, the relative standard deviations for C, Si, Mn, Ni, Cr and Cu are 3.3%-8.9%, 0.9%-2.8%, 1.2%-4.1%, 1.7%-3.0%, 1.1%-3.4% and 2.5%-8.5%, respectively, with the corresponding relative errors of 1.1%-7.9%, 1.0%-6.3%, 0.4%-3.9%, 1.5%-6.3%, 1.2%-4.0% and 1.2%-6.4%. Compared with the results of the traditional spark discharge optical emission spectrometry technique, the analytical performance of LIBS is just a little inferior due to the less stable laser-induced plasma and smaller amount of ablated sample by the laser. However, the precision, detection limits and accuracy of LIBS obtained in our present work were sufficient to meet the requirements for process analysis. These technical performances of higher stability of output energy and longer service life for DPSSL, in comparison to the Q-switch laser pumped by xeon lamp, qualify it well for the real time online analysis for different industrial applications.展开更多
A new method of combination micro column packed with 2 ethylhexyl hydrogen 2 ethylhexyl phosphonate(P 507 ) extraction resin with electrothermal vaporization inductively coupled plasma atomic emission spectrometry(ETV...A new method of combination micro column packed with 2 ethylhexyl hydrogen 2 ethylhexyl phosphonate(P 507 ) extraction resin with electrothermal vaporization inductively coupled plasma atomic emission spectrometry(ETV ICP AES) for separation and determination of trace rare earth elements(lanthanum, europium, yttrium and ytterbium) has been developed. Various influencing factors, such as the acidity of solution, flow rate and the volume of the sample, the length of the micro column on the separation and the preconcentration are examined in detail, the effect of the existence of organic matrix and the pre ashing temperature on determination of rare earth elements by ETV ICP AES has also been studied.展开更多
The development of laser sampling for optical emission spectrometry is reviewed . Advantages and limitations of pulsed laser sampling are compared with those of continuous laser sampling . A novel method of laser samp...The development of laser sampling for optical emission spectrometry is reviewed . Advantages and limitations of pulsed laser sampling are compared with those of continuous laser sampling . A novel method of laser sampling of liquid samples for inductively coupled plasma -atomic emission spectrometry has been proposed , and its analytical performance investigated.Experimental results showed that,as a method of sample introduction , laser vaporization of liquid samples enjoyed certain advantages , e.g.,much higher sensitivity, much lower detection limit and reduced sample volume , over solution nebulization . A perspective of the application of laser sampling-inductively coupled plasma - actomic emission spectrometry for rock and mineral analysis is estimated as well.展开更多
A new method is proposed to preconcentrate and separate trace scandium from a large volume of aqueous solution by solid liquid extraction with microcrystalline naphthalene. Scandium oxinate can be adsorbed onto microc...A new method is proposed to preconcentrate and separate trace scandium from a large volume of aqueous solution by solid liquid extraction with microcrystalline naphthalene. Scandium oxinate can be adsorbed onto microcrystalline naphthalene quantitatively under certain conditions. The effects of various experimental parameters have been optimized. The influence of additive of cobalt (II) on recovery of scandium (III) is studied in detail. The proposed method has been used for determination of Sc in Certified Reference Material of “Vehicle Exhaust Particulates”.展开更多
基金supported by the Development Fund of National Autonomous Demonstration Innovation Zone of Shandong Peninsula(Grant No.ZCQ17104)the National Key Research and Development Program of China(Grant No.2017YFB0305400)‘double hundred plan’ Yantai talent funding project
文摘A diode-pumped solid-state laser （DPSSL） with a high energetic stability and long service life is applied to ablate the steel samples instead of traditional Nd：YAG laser pumped by a xenon lamp, and several factors, such as laser pulse energy, repetition rate and argon flow rate, that influence laser-induced breakdown spectroscopy （LIBS） analytical performance are investigated in detail. Under the optimal experiment conditions, the relative standard deviations for C, Si, Mn, Ni, Cr and Cu are 3.3%-8.9%, 0.9%-2.8%, 1.2%-4.1%, 1.7%-3.0%, 1.1%-3.4% and 2.5%-8.5%, respectively, with the corresponding relative errors of 1.1%-7.9%, 1.0%-6.3%, 0.4%-3.9%, 1.5%-6.3%, 1.2%-4.0% and 1.2%-6.4%. Compared with the results of the traditional spark discharge optical emission spectrometry technique, the analytical performance of LIBS is just a little inferior due to the less stable laser-induced plasma and smaller amount of ablated sample by the laser. However, the precision, detection limits and accuracy of LIBS obtained in our present work were sufficient to meet the requirements for process analysis. These technical performances of higher stability of output energy and longer service life for DPSSL, in comparison to the Q-switch laser pumped by xeon lamp, qualify it well for the real time online analysis for different industrial applications.
文摘A new method of combination micro column packed with 2 ethylhexyl hydrogen 2 ethylhexyl phosphonate(P 507 ) extraction resin with electrothermal vaporization inductively coupled plasma atomic emission spectrometry(ETV ICP AES) for separation and determination of trace rare earth elements(lanthanum, europium, yttrium and ytterbium) has been developed. Various influencing factors, such as the acidity of solution, flow rate and the volume of the sample, the length of the micro column on the separation and the preconcentration are examined in detail, the effect of the existence of organic matrix and the pre ashing temperature on determination of rare earth elements by ETV ICP AES has also been studied.
文摘The development of laser sampling for optical emission spectrometry is reviewed . Advantages and limitations of pulsed laser sampling are compared with those of continuous laser sampling . A novel method of laser sampling of liquid samples for inductively coupled plasma -atomic emission spectrometry has been proposed , and its analytical performance investigated.Experimental results showed that,as a method of sample introduction , laser vaporization of liquid samples enjoyed certain advantages , e.g.,much higher sensitivity, much lower detection limit and reduced sample volume , over solution nebulization . A perspective of the application of laser sampling-inductively coupled plasma - actomic emission spectrometry for rock and mineral analysis is estimated as well.
文摘A new method is proposed to preconcentrate and separate trace scandium from a large volume of aqueous solution by solid liquid extraction with microcrystalline naphthalene. Scandium oxinate can be adsorbed onto microcrystalline naphthalene quantitatively under certain conditions. The effects of various experimental parameters have been optimized. The influence of additive of cobalt (II) on recovery of scandium (III) is studied in detail. The proposed method has been used for determination of Sc in Certified Reference Material of “Vehicle Exhaust Particulates”.
