A novel method was developed to fabricate monodispersed nanocomposite SiO2 sphere (200￣400 nm) containing homogeneously dispersed Ag nanoparticles (2￣6 nm). The morphology of inclusion was controlled through the N-[...A novel method was developed to fabricate monodispersed nanocomposite SiO2 sphere (200￣400 nm) containing homogeneously dispersed Ag nanoparticles (2￣6 nm). The morphology of inclusion was controlled through the N-[3-(Trimethoxysilyl)Propyl]ethylene diamine. TEM images showed that the silver nanoparticles were doped uniformly in silica spheres. UV-Vis showed that the doped silver nanoparticles have a plasmon resonance absorption band at 433 nm. Also SEM, EDX, XRD analyses were conducted to characterize thus-prepared sam- ples.展开更多
Silver(Ag)paste is widely used in semiconductor metallization,especially in silicon solar cells.Ag powder is the material with the highest proportion in Ag paste.The morphology and structure of Ag powder are crucial w...Silver(Ag)paste is widely used in semiconductor metallization,especially in silicon solar cells.Ag powder is the material with the highest proportion in Ag paste.The morphology and structure of Ag powder are crucial which determine its characteristics,especially for the sintering activity.In this work,a simple method was developed to synthesize a type of microcrystalline spherical Ag particles(SP-A)with internal pores and the structural changes and sintering behavior were thoroughly studied by combining ultra-small-angle X-ray scattering(USAXS),small-angle X-ray scattering(SAXS),in-situ heating X-ray diffraction(XRD),focused ion beam(FIB),and thermal analysis measurement.Due to the unique internal pores,the grain size of SP-A is smaller,and the coefficient of thermal expansion(CTE)is higher than that of traditional solid Ag particles.As a result,the sintering activity of SP-A is excellent,which can form a denser sintered body and form silver nanoparticles at the Ag–Si interface to improve silver silicon contact.Polycrystalline silicon solar cell built with SP-A obtained a low series resistance(Rs)and a high photoelectric conversion efficiency(PCE)of 19.26%.These fill a gap in Ag particle structure research,which is significant for the development of high-performance electronic Ag particles and efficient semiconductor devices.展开更多
Artificial prostheses for joint replacement are indispensable in orthopedic surgery.Unfortunately,the implanted surface is attractive to not only host cells but also bacteria.To enable better osteointegration,a mechan...Artificial prostheses for joint replacement are indispensable in orthopedic surgery.Unfortunately,the implanted surface is attractive to not only host cells but also bacteria.To enable better osteointegration,a mechanically stable porous structure was created on a titanium surface using laser treatment and metallic silver particles were embedded in a hydrophilic titanium oxide layer on top.The laser structuring resulted in unique amphora-shaped pores.Due to their hydrophilic surface conditions and capillary forces,the pores can be loaded preoperative with the antibiotic of choice/need,such as gentamicin.Cytotoxicity and differentiation assays with primary human osteoblast-like cells revealed no negative effect of the surface modification with or without gentamicin loading.An in vivo biocompatibility study showed significantly enhanced osteointegration as measured by push-out testing and histomorphometry 56 days after the implantation of the K-wires into rat femora.Using a S.aureus infection model,the porous,silver-coated K-wires slightly reduced the signs of bone destruction,while the wires were still colonized after 28 days.Loading the amphora-shaped pores with gentamicin significantly reduced the histopathological signs of bone destruction and no bacteria were detected on the wires.Taken together,this novel surface modification can be applied to new or established orthopedic implants.It enables preoperative loading with the antibiotic of choice/need without further equipment or post-coating,and supports osteointegration without a negative effect of the released dug,such as gentamicin.展开更多
The spectral properties of trivalent erbium ions（Er^3＋） are systematically studied in a melt-quenched germanate glass（60 GeO2-20PbO-10BaO-10K2O-0.1Ag2O） containing silver（Ag） particles.Thermal treatment of the ...The spectral properties of trivalent erbium ions（Er^3＋） are systematically studied in a melt-quenched germanate glass（60 GeO2-20PbO-10BaO-10K2O-0.1Ag2O） containing silver（Ag） particles.Thermal treatment of the material leads to the precipitation of Ag particles as observed by transmission electron microscopy and confirmed by absorption spectrum for the obvious surface plasmon resonance peak of Ag particles.The fluorescence from Er^3＋ in the 10-min-annealed sample with Ag particles is found to be 4.2 times enhanced compared with the unannealed sample excited by 488-nm Ar＋ laser.A comparison is made between a spectral study performed on the unannealed Er^3＋-doped sample and the one annealed for 20 min.The data of absorption cross section and Judd-Ofelt intensity parameters show the agreement between the two samples no matter whether there are Ag particles,indicating that the introduction of Ag particles by post-heat treatment has no effect on the crystal field environment of Er^3＋ ions.The fluorescence enhancement is attributed to the surface plasmon oscillations of Ag particles in germanate glass.展开更多
Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs wer...Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs were added to an aqueous additive solution for synthesizing a conductive ink,which was used to prepare two types of printing electrodes via screen printing.The first type included two flexible printed electrodes(FPEs):an FPE on a polyethylene terephthalate(PET)film and an FPE on paper.The second one was a polydimethylsiloxane(PDMS)-embedded FPE.The PETbased FPE exhibited high electrochemical stability when its sheet resistance was 0.38Ω/sq for a 50%(w/w)content of FSSPs in the prepared conductive ink.Moreover,the embedded FPE demonstrated excellent mechanical properties and high chemical stability.In addition,the embedded structure was endowed with stretchability,which is important for different devices,such as flexible biomedical sensors and flexible electronics.展开更多
文摘A novel method was developed to fabricate monodispersed nanocomposite SiO2 sphere (200￣400 nm) containing homogeneously dispersed Ag nanoparticles (2￣6 nm). The morphology of inclusion was controlled through the N-[3-(Trimethoxysilyl)Propyl]ethylene diamine. TEM images showed that the silver nanoparticles were doped uniformly in silica spheres. UV-Vis showed that the doped silver nanoparticles have a plasmon resonance absorption band at 433 nm. Also SEM, EDX, XRD analyses were conducted to characterize thus-prepared sam- ples.
基金support of the Soft Science Research Project of Guangdong Province(No.2017B030301013)the Guangdong Innovative Team Program(No.2013N080)the Guangdong Province Major Talent Introducing Program(No.2021QN020687).
文摘Silver(Ag)paste is widely used in semiconductor metallization,especially in silicon solar cells.Ag powder is the material with the highest proportion in Ag paste.The morphology and structure of Ag powder are crucial which determine its characteristics,especially for the sintering activity.In this work,a simple method was developed to synthesize a type of microcrystalline spherical Ag particles(SP-A)with internal pores and the structural changes and sintering behavior were thoroughly studied by combining ultra-small-angle X-ray scattering(USAXS),small-angle X-ray scattering(SAXS),in-situ heating X-ray diffraction(XRD),focused ion beam(FIB),and thermal analysis measurement.Due to the unique internal pores,the grain size of SP-A is smaller,and the coefficient of thermal expansion(CTE)is higher than that of traditional solid Ag particles.As a result,the sintering activity of SP-A is excellent,which can form a denser sintered body and form silver nanoparticles at the Ag–Si interface to improve silver silicon contact.Polycrystalline silicon solar cell built with SP-A obtained a low series resistance(Rs)and a high photoelectric conversion efficiency(PCE)of 19.26%.These fill a gap in Ag particle structure research,which is significant for the development of high-performance electronic Ag particles and efficient semiconductor devices.
基金This work was funded by the Federal Ministry of Education and Research,Germany[grant numbers 03VP03681,03VP03682].
文摘Artificial prostheses for joint replacement are indispensable in orthopedic surgery.Unfortunately,the implanted surface is attractive to not only host cells but also bacteria.To enable better osteointegration,a mechanically stable porous structure was created on a titanium surface using laser treatment and metallic silver particles were embedded in a hydrophilic titanium oxide layer on top.The laser structuring resulted in unique amphora-shaped pores.Due to their hydrophilic surface conditions and capillary forces,the pores can be loaded preoperative with the antibiotic of choice/need,such as gentamicin.Cytotoxicity and differentiation assays with primary human osteoblast-like cells revealed no negative effect of the surface modification with or without gentamicin loading.An in vivo biocompatibility study showed significantly enhanced osteointegration as measured by push-out testing and histomorphometry 56 days after the implantation of the K-wires into rat femora.Using a S.aureus infection model,the porous,silver-coated K-wires slightly reduced the signs of bone destruction,while the wires were still colonized after 28 days.Loading the amphora-shaped pores with gentamicin significantly reduced the histopathological signs of bone destruction and no bacteria were detected on the wires.Taken together,this novel surface modification can be applied to new or established orthopedic implants.It enables preoperative loading with the antibiotic of choice/need without further equipment or post-coating,and supports osteointegration without a negative effect of the released dug,such as gentamicin.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61078061 and 11104023)the Natural Science Foundation of Liaoning Province,China (Grant No. 20111032)+1 种基金the State Key Development Program for Basic Research of China (Grant No. 2012CB626801)the Fundamental Research Funds for the Central Universities (Grant No. 2011QN152)
文摘The spectral properties of trivalent erbium ions（Er^3＋） are systematically studied in a melt-quenched germanate glass（60 GeO2-20PbO-10BaO-10K2O-0.1Ag2O） containing silver（Ag） particles.Thermal treatment of the material leads to the precipitation of Ag particles as observed by transmission electron microscopy and confirmed by absorption spectrum for the obvious surface plasmon resonance peak of Ag particles.The fluorescence from Er^3＋ in the 10-min-annealed sample with Ag particles is found to be 4.2 times enhanced compared with the unannealed sample excited by 488-nm Ar＋ laser.A comparison is made between a spectral study performed on the unannealed Er^3＋-doped sample and the one annealed for 20 min.The data of absorption cross section and Judd-Ofelt intensity parameters show the agreement between the two samples no matter whether there are Ag particles,indicating that the introduction of Ag particles by post-heat treatment has no effect on the crystal field environment of Er^3＋ ions.The fluorescence enhancement is attributed to the surface plasmon oscillations of Ag particles in germanate glass.
基金This work was supported by the International Joint Research Center for Biomass Chemistry and Materials,Shaanxi International Science and Technology Cooperation Base(2018GHJD-19)the Shaanxi Key Industry Innovation Chain Projects(2020ZDLGY11-03)+2 种基金the Science and Technology Plan of Weiyang District of Xi'an(201910)the Scientific Research Plan Projects of Shaanxi Education Department(19JK0131)The project was also supported by the Foundation of Key Laboratory of Pulp and Paper Science and Technology of the Ministry of Education/Shandong Province of China(KF201814).
文摘Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs were added to an aqueous additive solution for synthesizing a conductive ink,which was used to prepare two types of printing electrodes via screen printing.The first type included two flexible printed electrodes(FPEs):an FPE on a polyethylene terephthalate(PET)film and an FPE on paper.The second one was a polydimethylsiloxane(PDMS)-embedded FPE.The PETbased FPE exhibited high electrochemical stability when its sheet resistance was 0.38Ω/sq for a 50%(w/w)content of FSSPs in the prepared conductive ink.Moreover,the embedded FPE demonstrated excellent mechanical properties and high chemical stability.In addition,the embedded structure was endowed with stretchability,which is important for different devices,such as flexible biomedical sensors and flexible electronics.
