In recent years,conjugated polymers have attracted great attention in the application as photovoltaic donor materials in polymer solar cells(PSCs).Broad absorption,lower-energy bandgap,higher hole mobility,relatively ...In recent years,conjugated polymers have attracted great attention in the application as photovoltaic donor materials in polymer solar cells(PSCs).Broad absorption,lower-energy bandgap,higher hole mobility,relatively lower HOMO energy levels,and higher solubility are important for the conjugated polymer donor materials to achieve high photovoltaic performance.Side-chain engineering plays a very important role in optimizing the physicochemical properties of the conjugated polymers.In this article,we review recent progress on the side-chain engineering of conjugated polymer donor materials,including the optimization of flexible side-chains for balancing solubility and intermolecular packing(aggregation),electron-withdrawing substituents for lowering HOMO energy levels,and two-dimension(2D)-conjugated polymers with conjugated side-chains for broadening absorption and enhancing hole mobility.After the molecular structural optimization by side-chain engineering,the2D-conjugated polymers based on benzodithiophene units demonstrated the best photovoltaic performance,with powerconversion efficiency higher than 9%.展开更多
Long-alkyl tail triphenylene （TP） side-chain liquid crystalline polymers （SCLCPs） with different spacer length （P-m-TP, m = 2, 3, 4, 6, 8, which is the number of carbon atom in the flexible alkyl spacers） have b...Long-alkyl tail triphenylene （TP） side-chain liquid crystalline polymers （SCLCPs） with different spacer length （P-m-TP, m = 2, 3, 4, 6, 8, which is the number of carbon atom in the flexible alkyl spacers） have been successfully synthesized via free radical polymerization. The differential scanning calorimetry （DSC）, polarized light microscopy （POM）, ultraviolet-visible spectroscopy （UV- Vis）, wide-angle X-ray diffraction （WAXD） and small-angle X-ray scattering （SAXS） measurements were performed to investigate the influence of multiple effects on the self-organization behaviors of P-m-TP, including steric effect, decoupling effect and π-π stacking effect. The experimental results revealed that P-m-TP （m = 2, 3, 4） formed the columnar phase which was developed by the TP moieties and the main chain as a whole, suggesting that the side-chains had strong steric effect even though the number of spacer length （m） exceeded 4. In addition, the clearing points （Tis） of the polymers were above 300 ℃. When m = 6 and 8, the polymers displayed hexagonal columnar phase and exhibited the low Tis （91 and 80 ℃ respectively）, originating from the self-assembly of triphenylene due to the decoupling effect and π-π stacking effect. This work offers a viable and inspiring pathway to control the phase transition temperature and phase structure ofTP SCLCPs via simply tailoring the spacer length and increasing the alkyl tail length of TP.展开更多
The fundamental optical storage mechanism of the laser light eddressable azobenzene moiety is briefly introduced.A modular and flexible synthesis design furnishes polyester matrices covalently integrating cyanoazobenz...The fundamental optical storage mechanism of the laser light eddressable azobenzene moiety is briefly introduced.A modular and flexible synthesis design furnishes polyester matrices covalently integrating cyanoazobenzene in regularlyspaced side chains. Thin films of these materials are particularly well suited for holographic storape. Notable figures of meritsof liquid crystalline polyesters are response time to blue-green laser light of the order of nanoseconds, storage capacityexpressed as 5000 lines/mm, and high, permanent (almost nine years) diffraction efficiency of the order of 50% or greater,and erasability, The implications of the main chain nature for polyester morphology and for the permanency of the inducedanisotropy are discussed, The design and methods of preparation of other significantly different polymer scaffolds supportingcyanoazobenzene are elaborated. Oligopeptides always result in amorphous materials, whereas copolymethacrylates anddendritic or hyperbranched polyesters provide some materials that exhibit liquid crystallinity. However, none of these scaffolds affords materials that result in permanent anisotropy when exposed to interfering laser light.展开更多
A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily 'tunab1e' by simple mechanical perturbation. Thepolymerization...A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily 'tunab1e' by simple mechanical perturbation. Thepolymerization of 10- [ 4 - (4' -methoxyphenoxycarbonyl )phenoxycarbonyl] - 1 -decyne (4 ) in itiated by theWCl_6-Ph_4Sn/dioxane complex yields polymer 5 with a M_w of 28400. The molecular structure of 5 ischaracterized by NMR, IR, and UV spectroscopy and its liquid crystalline behavior is investigated by DSC,POM, and XRD analysis. Upon mechanical perturbation, 5 exhibits unusual agitation-induced high-strengthdisclinations, shear-induced inversion walls, and solidification-induced banded textures. Such phenomenahave been observed in the main-chain liquid crystalline polymers with rigid backbones, but have seldom beenreported for the side-chain liquid crystalline polymers with flexible backbones, suggesting that the rigidpolyacetylene backbone of 5 plays a constructive role in inducing the novel molecular alignments.展开更多
合成了含联苯液晶基元的甲基丙烯酸酯单体,通过溶液聚合合成了一系列含不同长度尾链的聚甲基丙烯酸酯类侧链液晶聚合物(P-6biCm),采用1 H NMR对分子结构进行了表征,通过DSC、POM和1D WXRD对其热力学性质及本体相行为进行了表征.结果表明...合成了含联苯液晶基元的甲基丙烯酸酯单体,通过溶液聚合合成了一系列含不同长度尾链的聚甲基丙烯酸酯类侧链液晶聚合物(P-6biCm),采用1 H NMR对分子结构进行了表征,通过DSC、POM和1D WXRD对其热力学性质及本体相行为进行了表征.结果表明,当m=1,2,3,4时,聚合物可形成近晶相E相和近晶A相;当m=6,8时聚合物只形成近晶A相;当m>10时,聚合物可形成近晶B相和近晶A相.同时随尾链长度增加,聚合物的清亮点升高.展开更多
基金supported by the National Basic Research Program of China(2014CB643501)the National Natural Science Foundation of China(91433117,91333204 and 21374124)
文摘In recent years,conjugated polymers have attracted great attention in the application as photovoltaic donor materials in polymer solar cells(PSCs).Broad absorption,lower-energy bandgap,higher hole mobility,relatively lower HOMO energy levels,and higher solubility are important for the conjugated polymer donor materials to achieve high photovoltaic performance.Side-chain engineering plays a very important role in optimizing the physicochemical properties of the conjugated polymers.In this article,we review recent progress on the side-chain engineering of conjugated polymer donor materials,including the optimization of flexible side-chains for balancing solubility and intermolecular packing(aggregation),electron-withdrawing substituents for lowering HOMO energy levels,and two-dimension(2D)-conjugated polymers with conjugated side-chains for broadening absorption and enhancing hole mobility.After the molecular structural optimization by side-chain engineering,the2D-conjugated polymers based on benzodithiophene units demonstrated the best photovoltaic performance,with powerconversion efficiency higher than 9%.
基金financially supported by the National Natural Science Foundation of China (No.21504075)Natural Science Foundation of Hunan Province (No.2017JJ3294)
文摘Long-alkyl tail triphenylene （TP） side-chain liquid crystalline polymers （SCLCPs） with different spacer length （P-m-TP, m = 2, 3, 4, 6, 8, which is the number of carbon atom in the flexible alkyl spacers） have been successfully synthesized via free radical polymerization. The differential scanning calorimetry （DSC）, polarized light microscopy （POM）, ultraviolet-visible spectroscopy （UV- Vis）, wide-angle X-ray diffraction （WAXD） and small-angle X-ray scattering （SAXS） measurements were performed to investigate the influence of multiple effects on the self-organization behaviors of P-m-TP, including steric effect, decoupling effect and π-π stacking effect. The experimental results revealed that P-m-TP （m = 2, 3, 4） formed the columnar phase which was developed by the TP moieties and the main chain as a whole, suggesting that the side-chains had strong steric effect even though the number of spacer length （m） exceeded 4. In addition, the clearing points （Tis） of the polymers were above 300 ℃. When m = 6 and 8, the polymers displayed hexagonal columnar phase and exhibited the low Tis （91 and 80 ℃ respectively）, originating from the self-assembly of triphenylene due to the decoupling effect and π-π stacking effect. This work offers a viable and inspiring pathway to control the phase transition temperature and phase structure ofTP SCLCPs via simply tailoring the spacer length and increasing the alkyl tail length of TP.
文摘The fundamental optical storage mechanism of the laser light eddressable azobenzene moiety is briefly introduced.A modular and flexible synthesis design furnishes polyester matrices covalently integrating cyanoazobenzene in regularlyspaced side chains. Thin films of these materials are particularly well suited for holographic storape. Notable figures of meritsof liquid crystalline polyesters are response time to blue-green laser light of the order of nanoseconds, storage capacityexpressed as 5000 lines/mm, and high, permanent (almost nine years) diffraction efficiency of the order of 50% or greater,and erasability, The implications of the main chain nature for polyester morphology and for the permanency of the inducedanisotropy are discussed, The design and methods of preparation of other significantly different polymer scaffolds supportingcyanoazobenzene are elaborated. Oligopeptides always result in amorphous materials, whereas copolymethacrylates anddendritic or hyperbranched polyesters provide some materials that exhibit liquid crystallinity. However, none of these scaffolds affords materials that result in permanent anisotropy when exposed to interfering laser light.
基金This project was in part supported by the Hong Kong Research Grants Council(HKUST597/95P&6149/97P)
文摘A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily 'tunab1e' by simple mechanical perturbation. Thepolymerization of 10- [ 4 - (4' -methoxyphenoxycarbonyl )phenoxycarbonyl] - 1 -decyne (4 ) in itiated by theWCl_6-Ph_4Sn/dioxane complex yields polymer 5 with a M_w of 28400. The molecular structure of 5 ischaracterized by NMR, IR, and UV spectroscopy and its liquid crystalline behavior is investigated by DSC,POM, and XRD analysis. Upon mechanical perturbation, 5 exhibits unusual agitation-induced high-strengthdisclinations, shear-induced inversion walls, and solidification-induced banded textures. Such phenomenahave been observed in the main-chain liquid crystalline polymers with rigid backbones, but have seldom beenreported for the side-chain liquid crystalline polymers with flexible backbones, suggesting that the rigidpolyacetylene backbone of 5 plays a constructive role in inducing the novel molecular alignments.
文摘合成了含联苯液晶基元的甲基丙烯酸酯单体,通过溶液聚合合成了一系列含不同长度尾链的聚甲基丙烯酸酯类侧链液晶聚合物(P-6biCm),采用1 H NMR对分子结构进行了表征,通过DSC、POM和1D WXRD对其热力学性质及本体相行为进行了表征.结果表明,当m=1,2,3,4时,聚合物可形成近晶相E相和近晶A相;当m=6,8时聚合物只形成近晶A相;当m>10时,聚合物可形成近晶B相和近晶A相.同时随尾链长度增加,聚合物的清亮点升高.
