Generally speaking, main flow path of gas turbine is assumed to be perfect for standard 3D computation. But in real engine, the turbine annulus geometry is not completely smooth for the presence of the shroud and asso...Generally speaking, main flow path of gas turbine is assumed to be perfect for standard 3D computation. But in real engine, the turbine annulus geometry is not completely smooth for the presence of the shroud and associated cavity near the end wall. Besides, shroud leakage flow is one of the dominant sources of secondary flow in tur- bomachinery, which not only causes a deterioration of useful work but also a penalty on turbine efficiency. It has been found that neglect shroud leakage flow makes the computed velocity profiles and loss distribution signifi- cantly different to those measured. Even so, the influence of shroud leakage flow is seldom taken into considera- tion during the routine of turbine design due to insufficient understanding of its impact on end wall flows and tur- bine performance. In order to evaluate the impact of tip shroud geometry on turbine performance, a 3D computa- tional investigation for 1.5-stage turbine with shrouded blades was performed in this paper. The following ge- ometry parameters were varied respectively：展开更多
A numerical investigation on over-shroud & inter-shroud leakage flow has been carried out to explore the underneath flow physics at the stage of shrouded Low Pressure(LP) turbine.Compared with the No inter-Shroud ...A numerical investigation on over-shroud & inter-shroud leakage flow has been carried out to explore the underneath flow physics at the stage of shrouded Low Pressure(LP) turbine.Compared with the No inter-Shroud gap's Leakage flow Model(NSLM) and With inter-Shroud gap's Leakage flow Model(WSLM),the aerodynamic characteristics and the heat transfer performance have been studied.Through the aerodynamic point of view,it is concluded that due to the pressure difference between the rotor's passage and the over-shroud cavity,in the stream-wise direction,flow structure has been modified,and the inter-shroud leakage flow may even cause flow separation in the vicinity of the blade passage's throat.In the circumferential direction,separation flows appear over the rotor's shroud surface(upper platform of the shroud).Meanwhile,from the point of view of heat transfer,further provision on contour maps of the non-dimensional Nusselt number reveals that the reattachment of leakage flow would enhance the heat transfer rates and endanger the rotor's labyrinth fins over the shroud.However,due to the limited amount of inter-shroud leakage flow(current computational model),temperature distribution variation along the blade surface(near the rotor's tip section) seems to have only minor insignificant differences.At the end of the paper,the author puts forward some recommendations for the purpose of future successful turbine design.展开更多
The pressing demand for future advanced gas turbine requires to identify the losses in a turbine and to understand the physical mechanisms producing them. In low pressure turbines with shrouded blades, a large portion...The pressing demand for future advanced gas turbine requires to identify the losses in a turbine and to understand the physical mechanisms producing them. In low pressure turbines with shrouded blades, a large portion of these losses is generated by tip shroud leakage flow and associated interaction. For this reason, shroud leakage losses are generally grouped into the losses of leakage flow itself and the losses caused by the interaction between leakage flow and mainstream. In order to evaluate the influence of shroud leakage flow and related losses on turbine performance, computational investigations for a 2-stage low pressure turbine is presented and discussed in this paper. Three dimensional steady multistage calculations using mixing plane approach were performed including detailed tip shroud geometry. Results showed that turbines with shrouded blades have an obvious advantage over unshrouded ones in terms of aerodynamic performance. A loss mechanism breakdown analysis demonstrated that the leakage loss is the main contributor in the first stage while mixing loss dominates in the second stage. Due to the blade-to-blade pressure gradient, both inlet and exit cavity present non-uniform leakage injection and extraction. The flow in the exit cavity is filled with cavity vortex, leakage jet attached to the cavity wall and recirculation zone induced by main flow ingestion. Furthermore, radial gap and exit cavity size of tip shroud have a major effect on the yaw angle near the tip region in the main flow. Therefore, a full calculation of shroud leakage flow is necessary in turbine performance analysis and the shroud geometric features need to be considered during turbine design process.展开更多
基金Financial support from the Innovation Foundation of BUAA for PhD Graduates(YWF-13-A01-014)
文摘Generally speaking, main flow path of gas turbine is assumed to be perfect for standard 3D computation. But in real engine, the turbine annulus geometry is not completely smooth for the presence of the shroud and associated cavity near the end wall. Besides, shroud leakage flow is one of the dominant sources of secondary flow in tur- bomachinery, which not only causes a deterioration of useful work but also a penalty on turbine efficiency. It has been found that neglect shroud leakage flow makes the computed velocity profiles and loss distribution signifi- cantly different to those measured. Even so, the influence of shroud leakage flow is seldom taken into considera- tion during the routine of turbine design due to insufficient understanding of its impact on end wall flows and tur- bine performance. In order to evaluate the impact of tip shroud geometry on turbine performance, a 3D computa- tional investigation for 1.5-stage turbine with shrouded blades was performed in this paper. The following ge- ometry parameters were varied respectively：
基金supported by grants from the National Natural Science Foundation of China(No.51306177)
文摘A numerical investigation on over-shroud & inter-shroud leakage flow has been carried out to explore the underneath flow physics at the stage of shrouded Low Pressure(LP) turbine.Compared with the No inter-Shroud gap's Leakage flow Model(NSLM) and With inter-Shroud gap's Leakage flow Model(WSLM),the aerodynamic characteristics and the heat transfer performance have been studied.Through the aerodynamic point of view,it is concluded that due to the pressure difference between the rotor's passage and the over-shroud cavity,in the stream-wise direction,flow structure has been modified,and the inter-shroud leakage flow may even cause flow separation in the vicinity of the blade passage's throat.In the circumferential direction,separation flows appear over the rotor's shroud surface(upper platform of the shroud).Meanwhile,from the point of view of heat transfer,further provision on contour maps of the non-dimensional Nusselt number reveals that the reattachment of leakage flow would enhance the heat transfer rates and endanger the rotor's labyrinth fins over the shroud.However,due to the limited amount of inter-shroud leakage flow(current computational model),temperature distribution variation along the blade surface(near the rotor's tip section) seems to have only minor insignificant differences.At the end of the paper,the author puts forward some recommendations for the purpose of future successful turbine design.
基金supported by the Innovation Foundation of BUAA for PhD Graduates(YWF-13-A01-014)
文摘The pressing demand for future advanced gas turbine requires to identify the losses in a turbine and to understand the physical mechanisms producing them. In low pressure turbines with shrouded blades, a large portion of these losses is generated by tip shroud leakage flow and associated interaction. For this reason, shroud leakage losses are generally grouped into the losses of leakage flow itself and the losses caused by the interaction between leakage flow and mainstream. In order to evaluate the influence of shroud leakage flow and related losses on turbine performance, computational investigations for a 2-stage low pressure turbine is presented and discussed in this paper. Three dimensional steady multistage calculations using mixing plane approach were performed including detailed tip shroud geometry. Results showed that turbines with shrouded blades have an obvious advantage over unshrouded ones in terms of aerodynamic performance. A loss mechanism breakdown analysis demonstrated that the leakage loss is the main contributor in the first stage while mixing loss dominates in the second stage. Due to the blade-to-blade pressure gradient, both inlet and exit cavity present non-uniform leakage injection and extraction. The flow in the exit cavity is filled with cavity vortex, leakage jet attached to the cavity wall and recirculation zone induced by main flow ingestion. Furthermore, radial gap and exit cavity size of tip shroud have a major effect on the yaw angle near the tip region in the main flow. Therefore, a full calculation of shroud leakage flow is necessary in turbine performance analysis and the shroud geometric features need to be considered during turbine design process.
