基于七自由度(seven degrees of freedom,7-DOF)机械手臂的结构和自运动特性,提出通过对关节位置进行几何分析,求解机械臂逆运动学的方法.该方法在自运动构型的基础上,以0坐标系为其他坐标系的基系,根据同一向量在不同坐标系之间的投影...基于七自由度(seven degrees of freedom,7-DOF)机械手臂的结构和自运动特性,提出通过对关节位置进行几何分析,求解机械臂逆运动学的方法.该方法在自运动构型的基础上,以0坐标系为其他坐标系的基系,根据同一向量在不同坐标系之间的投影特性与关节角之间存在着的对应关系,实现对七自由度机械臂逆运动学的求解.该方法能够求解出针对任一特定末端位姿的所有理论逆解.通过引入机械臂优化的二次目标,对所有理论逆解进行优化,可得最优逆解用于机械臂控制.与梯度投影法等通用算法相比,该方法具有直观简练、计算量小等优点,且不同的末端位姿求解过程互不影响,对系列性末端位姿连续求解不存在累积误差.展开更多
The current motion planning approaches for redundant manipulators mainly includes two categories： improved gradient-projection method and some other efficiency numerical methods. The former is excessively sensitive t...The current motion planning approaches for redundant manipulators mainly includes two categories： improved gradient-projection method and some other efficiency numerical methods. The former is excessively sensitive to parameters, which makes adjustment difficult; and the latter treats the motion planning as general task by ignoring the particularity, which has good universal property but reduces the solving speed for on-line real-time planning. In this paper, a novel stepwise solution based on self-motion manifold is proposed for motion planning of redundant manipulators, namely, the chief tasks and secondary tasks are implemented step by step. Firstly, the posture tracking of end-effector is achieved accurately by employing the non-redundant joint. Secondly, the end-effector is set to keep stationary. Finally, self-motion of manipulator is realized via additional work on the gradient of redundant joint displacement. To verify this solution, experiments of round obstacle avoiding are carried out via the planar 3 degree-of-~eedom manipulator. And the experimental results indicate that this motion planning algorithm can effectively achieve obstacle avoiding and posture tracking of the end-effector. Compared with traditional gradient projection method, this approach can accelerate the problem-solving process, and is more applicable to obstacle avoiding and other additional work in displacement level.展开更多
The presented work examines the mechanism and conditions of self-motion in bodies as systems of interacting elements. It is shown how the oscillation parameters of these elements determine the mode of motion of the sy...The presented work examines the mechanism and conditions of self-motion in bodies as systems of interacting elements. It is shown how the oscillation parameters of these elements determine the mode of motion of the system (body). In this case, the motion is considered as a consequence of symmetry breaking of forces in the systems themselves, and not as a reaction of individual elements to external influences. It is shown that such a violation takes place both in the gravitational field and when the system moves by inertia. Examples of the influence of changes in phase (φ) and frequency (f) parameters of the system elements on the velocity mode of its motion in space are considered. The identity of the causes of self-motion is revealed both in the case of gravitation and inertial motion.展开更多
Architectural singularity belongs to the Type II singularity,in which a parallel manipulator(PM)gains one or more degrees of freedom and becomes uncontrollable.PMs remaining permanently in a singularity are beneficial...Architectural singularity belongs to the Type II singularity,in which a parallel manipulator(PM)gains one or more degrees of freedom and becomes uncontrollable.PMs remaining permanently in a singularity are beneficial for linearto-rotary motion conversion.Griffis-Duffy(GD)platform is a mobile structure admitting a Bricard motion.In this paper,we present a coordinate-free approach to the design of generalized GD platforms,which consists in determining the shape and attachment of both the moving platform and the fixed base.The generalized GD platform is treated as a combination of six coaxial single-loop mechanisms under the same constraints.Owing to the inversion,hidden in the geometric structure of these single-loop mechanisms,the mapping from a line to a circle establishes the geometric transformation between the fixed base and the moving platform based on the center of inversion,and describes the shape and attachment of the generalized GD platform.Moreover,the center of inversion not only identifies the location of rotation axis,but also affects the shape of the platform mechanism.A graphical construction of generalized GD platforms using inversion,proposed in the paper,provides geometrically feasible solutions of the manipulator design for the requirement of the location of rotation axis.展开更多
文摘基于七自由度(seven degrees of freedom,7-DOF)机械手臂的结构和自运动特性,提出通过对关节位置进行几何分析,求解机械臂逆运动学的方法.该方法在自运动构型的基础上,以0坐标系为其他坐标系的基系,根据同一向量在不同坐标系之间的投影特性与关节角之间存在着的对应关系,实现对七自由度机械臂逆运动学的求解.该方法能够求解出针对任一特定末端位姿的所有理论逆解.通过引入机械臂优化的二次目标,对所有理论逆解进行优化,可得最优逆解用于机械臂控制.与梯度投影法等通用算法相比,该方法具有直观简练、计算量小等优点,且不同的末端位姿求解过程互不影响,对系列性末端位姿连续求解不存在累积误差.
基金supported by National Hi-tech Research and Develop- ment Program of China (863 Program, Grant No. 2005AA404291)
文摘The current motion planning approaches for redundant manipulators mainly includes two categories： improved gradient-projection method and some other efficiency numerical methods. The former is excessively sensitive to parameters, which makes adjustment difficult; and the latter treats the motion planning as general task by ignoring the particularity, which has good universal property but reduces the solving speed for on-line real-time planning. In this paper, a novel stepwise solution based on self-motion manifold is proposed for motion planning of redundant manipulators, namely, the chief tasks and secondary tasks are implemented step by step. Firstly, the posture tracking of end-effector is achieved accurately by employing the non-redundant joint. Secondly, the end-effector is set to keep stationary. Finally, self-motion of manipulator is realized via additional work on the gradient of redundant joint displacement. To verify this solution, experiments of round obstacle avoiding are carried out via the planar 3 degree-of-~eedom manipulator. And the experimental results indicate that this motion planning algorithm can effectively achieve obstacle avoiding and posture tracking of the end-effector. Compared with traditional gradient projection method, this approach can accelerate the problem-solving process, and is more applicable to obstacle avoiding and other additional work in displacement level.
文摘The presented work examines the mechanism and conditions of self-motion in bodies as systems of interacting elements. It is shown how the oscillation parameters of these elements determine the mode of motion of the system (body). In this case, the motion is considered as a consequence of symmetry breaking of forces in the systems themselves, and not as a reaction of individual elements to external influences. It is shown that such a violation takes place both in the gravitational field and when the system moves by inertia. Examples of the influence of changes in phase (φ) and frequency (f) parameters of the system elements on the velocity mode of its motion in space are considered. The identity of the causes of self-motion is revealed both in the case of gravitation and inertial motion.
基金Supported by National Natural Science Foundation of China (Grant Nos.U1813221,52075015)Personnel Startup Project of Zhejiang A&F University Scientific Research Development Foundation of China (Grant No.2024LFR015)。
文摘Architectural singularity belongs to the Type II singularity,in which a parallel manipulator(PM)gains one or more degrees of freedom and becomes uncontrollable.PMs remaining permanently in a singularity are beneficial for linearto-rotary motion conversion.Griffis-Duffy(GD)platform is a mobile structure admitting a Bricard motion.In this paper,we present a coordinate-free approach to the design of generalized GD platforms,which consists in determining the shape and attachment of both the moving platform and the fixed base.The generalized GD platform is treated as a combination of six coaxial single-loop mechanisms under the same constraints.Owing to the inversion,hidden in the geometric structure of these single-loop mechanisms,the mapping from a line to a circle establishes the geometric transformation between the fixed base and the moving platform based on the center of inversion,and describes the shape and attachment of the generalized GD platform.Moreover,the center of inversion not only identifies the location of rotation axis,but also affects the shape of the platform mechanism.A graphical construction of generalized GD platforms using inversion,proposed in the paper,provides geometrically feasible solutions of the manipulator design for the requirement of the location of rotation axis.
