In Shougang Jingtang 5 500m 3 huge blast furnace ( BF ) design , dome combustion hot blast stove ( DCHBS ) technology is developed.DCHBS process is optimized and integrated , and reasonable hot blast stove ( HBS ) tec...In Shougang Jingtang 5 500m 3 huge blast furnace ( BF ) design , dome combustion hot blast stove ( DCHBS ) technology is developed.DCHBS process is optimized and integrated , and reasonable hot blast stove ( HBS ) technical parameters are determined.Mathematic model is established and adopted by computational fluid dynamics ( CFD ) .The transmission theory is studied for hot blast stove combustion and gas flow , and distribution results of HBS velocity field , CO density field and temperature field are achieved.Physical test model and hot trail unit are established , and the numeral calculation result is verified through test and investigation.3-D simulation design is adopted.HBS process flow and process layout are optimized and designed.Combustion air two-stage high temperature preheating technology is designed and developed.Two sets of small size DCHBSs are adopted to preheat the combustion air to 520-600℃.With the precondition of BF gas combustion , the hot blast stove dome temperature can exceed 1 420 ℃. According to DCHBS technical features , reasonable refractory structure is designed.Effective technical measures are adopted to prevent hot blast stove shell intercrystalline stress corrosion.Hot blast stove hot pipe and lining system are optimized and designed.After blowing in , the blast temperature keeps increasing , and the monthly average blast temperature reaches 1 300℃ when burning single BF gas.展开更多
The suppression of nitrogen oxides(NO_x) is the key to reducing pollutant emission of a domestic coal-fired stove due to the limitation of technology condition and economic cost. The decoupling combustion(DC) technolo...The suppression of nitrogen oxides(NO_x) is the key to reducing pollutant emission of a domestic coal-fired stove due to the limitation of technology condition and economic cost. The decoupling combustion(DC) technology invented by Institute of Process Engineering(IPE), Chinese Academy of Sciences(CAS) is characterized by that a traditional stove is separated into a pyrolysis and a combustion chamber as well as a bottom passage between them. In this study, the combustion of briquette from bituminous coal in different operation modes in a typical decoupling stove is tested and simulated to validate the advantage of DC technology over so-called reverse combustion. The smokeless and high-efficiency combustion of bituminous briquette with low emissions of NO_x and CO can be implemented by utilizing low NO_x combustion under low temperature and reduction atmosphere in the pyrolysis chamber as well as after-combustion of char and pyrolysis gas under high temperature and oxidation atmosphere in the combustion chamber. The effects of the main reducing components in pyrolysis gas as well as char on NO_x reduction were numerically investigated in this study, which shows that the reducing ability increases gradually from CH_4, CO to char, but the combined reducing ability of them cannot be determined by a simple addition.展开更多
Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamica...Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamical and dynamical analyses. The results were verified by the previously measured data. Then, the influence of hot stove oper- ation parameters on NOx concentration and the mechanism of liquid water formation in hot stove were studied. The results indicated that in gas period, the dome temperature should be controlled below 1420 ℃ in order to decrease NO~ emission. In the case of banking operation, NOx concentration was about 40--60 times higher than that in gas period. Hence, reasonable measures should be taken to reduce banking operation, especially in the situation of large excess air ratio. Since NOx formed during the whole operation process, the most effective way of preventing liquid water and HNO3 generation is to control the pipe and shell temperature, which should be higher than the condensa- tion temperature of water vapour. The condensation temperature should be considered as the design temperature of pipe and shell for hot stove.展开更多
This paper presents the development and assessment of two low-cost, travelling wave, thermoacoustic generators operating by waste heat energy from cooking stove. One powered by waste heat from a propane-driven stove, ...This paper presents the development and assessment of two low-cost, travelling wave, thermoacoustic generators operating by waste heat energy from cooking stove. One powered by waste heat from a propane-driven stove, the other powered by waste heat from a wood-burning stove. The propane-driven thermoacoustic generator was successfully demonstrated to produce approximately 15 watts of electricity using a commercial audio loudspeaker. The wood-burning thermoacoustic generator was successfully constructed and tested to generate a maximum of 22.7 watts of electricity under a pressurised condition. The latter has a high potential to be used by over 1.5 billion people in rural communities for applications such as LED lighting, charging mobile phones or charging a 12V battery. A comprehensive power assessment of the propane-driving generator as well as the development and performance assessment of the wood-burning generator are described throughout this article.展开更多
Straw pellets are widely promoted and expected to be a cleaner alternative fuel to unprocessed crop residues and rawcoal in rural China.However,the effectiveness of these dissemination programs is not well evaluated.I...Straw pellets are widely promoted and expected to be a cleaner alternative fuel to unprocessed crop residues and rawcoal in rural China.However,the effectiveness of these dissemination programs is not well evaluated.In this field study,emission characteristics of burning strawpellets,rawcoal,and unprocessed corn cobs in heating stoveswere investigated in a pilot village in Northeast China.Emission measurements covering the whole combustion cycle(ignition,flaming,and smoldering phases)shows the promotion of improved heating stoves and straw pellets could reduce pollutant emissions(e.g.,SO_(2) and CO),but increase NO_(X) and PM_(2.5) emissions compared to the initial stove-fuel use pattern in the studied area.There is a significant variance in emission characteristics between different combustion phases.The normalized emission concentrations of the different stove-fuel combinations were higher than the limits in the Chinese national standard for heating stoves,indicating that the standard is not met for real-world emissions.Coal consumption was lower than official data.Household surveys were conducted to identify the barriers to fuel and stove access associated with existing promotion strategies,management,and policies.The pilot program was of the typical“subsidy-and-policy-dependence”pattern and was unlikely to be implemented on a large scale.Technological innovation,operational optimization,and proper policies considering the local socioeconomic factors are needed to sustain the promotion of biomass straw pellets and stoves.展开更多
The computer simulation of the combustion process in blast furnace(BF) stove has been studied by using the k-ε-g turbulent diffusion flame model.The combustion process in blunt annular ceramic burner was calculated b...The computer simulation of the combustion process in blast furnace(BF) stove has been studied by using the k-ε-g turbulent diffusion flame model.The combustion process in blunt annular ceramic burner was calculated by using the software.The profiles of gas and air velocity,temperature of the combustion products,concentration of the components,and the shape and length of the flame during combustion have been researched.Compared with the original annular ceramic burner,the new design of the blunt one improves the mixing of the gas and the air significantly,and shortened the length of the flame.展开更多
文摘In Shougang Jingtang 5 500m 3 huge blast furnace ( BF ) design , dome combustion hot blast stove ( DCHBS ) technology is developed.DCHBS process is optimized and integrated , and reasonable hot blast stove ( HBS ) technical parameters are determined.Mathematic model is established and adopted by computational fluid dynamics ( CFD ) .The transmission theory is studied for hot blast stove combustion and gas flow , and distribution results of HBS velocity field , CO density field and temperature field are achieved.Physical test model and hot trail unit are established , and the numeral calculation result is verified through test and investigation.3-D simulation design is adopted.HBS process flow and process layout are optimized and designed.Combustion air two-stage high temperature preheating technology is designed and developed.Two sets of small size DCHBSs are adopted to preheat the combustion air to 520-600℃.With the precondition of BF gas combustion , the hot blast stove dome temperature can exceed 1 420 ℃. According to DCHBS technical features , reasonable refractory structure is designed.Effective technical measures are adopted to prevent hot blast stove shell intercrystalline stress corrosion.Hot blast stove hot pipe and lining system are optimized and designed.After blowing in , the blast temperature keeps increasing , and the monthly average blast temperature reaches 1 300℃ when burning single BF gas.
基金financial supports from the "Transformational Technologies for Clean Energy and Demonstration",Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA21040400)the National Natural Science Foundation of China(Nos21376244 and 91334107)
文摘The suppression of nitrogen oxides(NO_x) is the key to reducing pollutant emission of a domestic coal-fired stove due to the limitation of technology condition and economic cost. The decoupling combustion(DC) technology invented by Institute of Process Engineering(IPE), Chinese Academy of Sciences(CAS) is characterized by that a traditional stove is separated into a pyrolysis and a combustion chamber as well as a bottom passage between them. In this study, the combustion of briquette from bituminous coal in different operation modes in a typical decoupling stove is tested and simulated to validate the advantage of DC technology over so-called reverse combustion. The smokeless and high-efficiency combustion of bituminous briquette with low emissions of NO_x and CO can be implemented by utilizing low NO_x combustion under low temperature and reduction atmosphere in the pyrolysis chamber as well as after-combustion of char and pyrolysis gas under high temperature and oxidation atmosphere in the combustion chamber. The effects of the main reducing components in pyrolysis gas as well as char on NO_x reduction were numerically investigated in this study, which shows that the reducing ability increases gradually from CH_4, CO to char, but the combined reducing ability of them cannot be determined by a simple addition.
基金Sponsored by National Natural Science Foundation of China(61271303)
文摘Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamical and dynamical analyses. The results were verified by the previously measured data. Then, the influence of hot stove oper- ation parameters on NOx concentration and the mechanism of liquid water formation in hot stove were studied. The results indicated that in gas period, the dome temperature should be controlled below 1420 ℃ in order to decrease NO~ emission. In the case of banking operation, NOx concentration was about 40--60 times higher than that in gas period. Hence, reasonable measures should be taken to reduce banking operation, especially in the situation of large excess air ratio. Since NOx formed during the whole operation process, the most effective way of preventing liquid water and HNO3 generation is to control the pipe and shell temperature, which should be higher than the condensa- tion temperature of water vapour. The condensation temperature should be considered as the design temperature of pipe and shell for hot stove.
文摘This paper presents the development and assessment of two low-cost, travelling wave, thermoacoustic generators operating by waste heat energy from cooking stove. One powered by waste heat from a propane-driven stove, the other powered by waste heat from a wood-burning stove. The propane-driven thermoacoustic generator was successfully demonstrated to produce approximately 15 watts of electricity using a commercial audio loudspeaker. The wood-burning thermoacoustic generator was successfully constructed and tested to generate a maximum of 22.7 watts of electricity under a pressurised condition. The latter has a high potential to be used by over 1.5 billion people in rural communities for applications such as LED lighting, charging mobile phones or charging a 12V battery. A comprehensive power assessment of the propane-driving generator as well as the development and performance assessment of the wood-burning generator are described throughout this article.
基金supported by the Ministry of Science and Technology of China(No.2017YFC0211400)and the China Office of Clean Air Asia.
文摘Straw pellets are widely promoted and expected to be a cleaner alternative fuel to unprocessed crop residues and rawcoal in rural China.However,the effectiveness of these dissemination programs is not well evaluated.In this field study,emission characteristics of burning strawpellets,rawcoal,and unprocessed corn cobs in heating stoveswere investigated in a pilot village in Northeast China.Emission measurements covering the whole combustion cycle(ignition,flaming,and smoldering phases)shows the promotion of improved heating stoves and straw pellets could reduce pollutant emissions(e.g.,SO_(2) and CO),but increase NO_(X) and PM_(2.5) emissions compared to the initial stove-fuel use pattern in the studied area.There is a significant variance in emission characteristics between different combustion phases.The normalized emission concentrations of the different stove-fuel combinations were higher than the limits in the Chinese national standard for heating stoves,indicating that the standard is not met for real-world emissions.Coal consumption was lower than official data.Household surveys were conducted to identify the barriers to fuel and stove access associated with existing promotion strategies,management,and policies.The pilot program was of the typical“subsidy-and-policy-dependence”pattern and was unlikely to be implemented on a large scale.Technological innovation,operational optimization,and proper policies considering the local socioeconomic factors are needed to sustain the promotion of biomass straw pellets and stoves.
基金Item Sponsored by National Natural Science Foundation(50104001)Science and Technology Tackle Key Foundation of Inner Mongolia(980307-4)
文摘The computer simulation of the combustion process in blast furnace(BF) stove has been studied by using the k-ε-g turbulent diffusion flame model.The combustion process in blunt annular ceramic burner was calculated by using the software.The profiles of gas and air velocity,temperature of the combustion products,concentration of the components,and the shape and length of the flame during combustion have been researched.Compared with the original annular ceramic burner,the new design of the blunt one improves the mixing of the gas and the air significantly,and shortened the length of the flame.
