Control of dust in underground coal mines is critical for mitigating both safety and health hazards.For decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effective...Control of dust in underground coal mines is critical for mitigating both safety and health hazards.For decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effectiveness of various dust control technologies in coal mines.Recent studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains(CACs)to reduce respirable dust in key operator positions.While detailed dust characterization was not a focus of such studies,this is a growing area of interest.Using preserved filter samples from three previous NIOSH studies,the current work aims to explore the effect of two different scrubbers(one wet and one dry)and a roof bolter CAC on respirable dust composition and particle size distribution.For this,the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive X-ray.Results indicate that dust composition was not appreciably affected by either scrubber or the CAC.However,the wet scrubber and CAC appeared to decrease the overall particle size distribution.Such an effect of the dry scrubber was not consistently observed,but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return air.Aside from the insights gained with respect to the three specific dust control case studies revisited here,this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.展开更多
The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry o...The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry of Au and Cu alloys and associated minerals, and mineralization type. This study is aiming at the genetic history of ore-bearing fluid events, geochemical evaluation and exploration significance. The results showed that the mineralization could be considered as a single major episode generated by metamorphic mesothermal solution rich in sulfides and unsaturated respect to Au. It was differentiated into many stages; started with formation of auriferous pyrite that was pseudomorphed by secondary hematite, limonite and goethite. Three phases of Au alloy were precipitated, and Cu＋Sn and Ag-rich alloys were produced respectively and followed by deposition of two generations of barren pyrite. Calcite and ankerite were crystalized, surrounded and partially replaced some of early formed minerals. Finally, barren muscovite recrystallized around and inside both later formed carbonate minerals that were free of any sign of Au in their structures. The processes of deformation, recrystallization, annealing, dissolution, remobilization and re-precipitation played the most important roles in the genetic history of the mineralization.展开更多
Corrosion inhibition characteristics of bio polymer dextran was studied for the corrosion control of 6061 Al-15%_((v)) SiC_((P)) composite and its base alloy in 1 mol·L^(-1) HCl. Standard electrochemical techniqu...Corrosion inhibition characteristics of bio polymer dextran was studied for the corrosion control of 6061 Al-15%_((v)) SiC_((P)) composite and its base alloy in 1 mol·L^(-1) HCl. Standard electrochemical techniques such as potentiodynamic polarization(PDP) measurements and electrochemical impedance spectroscopy(EIS) method were adopted for corrosion rate measurement. Surface morphology was studied by scanning electron microscopy(SEM) and elemental mapping was done by energy dispersive X-ray(EDX) analysis. Suitable mechanism was proposed for corrosion and inhibition process. Results indicated that dextran acts as an excellent anticorrosive agent for the corrosion control of 6061 Al-15%_((v)) SiC_((P)) composite, with maximum inhibition efficiency of 91% for the concentration of 0.4 g·L^(-1) at 303 K. Dextran acted as a mixed type of inhibitor, and got physically adsorbed both on composite and base alloy by obeying Langmuir adsorption isotherm. Dextran is proved to be a green inhibitor with environmental and economic benefits.展开更多
The antioxidant and anticorrosive effect of Tragia involucrate L.(T. involucrate L.) was evaluated to aid in finding new compounds which can be used for various purposes. The total phenolic(TPC) and flavonoid content(...The antioxidant and anticorrosive effect of Tragia involucrate L.(T. involucrate L.) was evaluated to aid in finding new compounds which can be used for various purposes. The total phenolic(TPC) and flavonoid content(TFC),antioxidant activity(DPPH, reducing potential and phosphomolybdenum), and electrochemical measurements,Fourier transform infrared(FT-IR), UV–visible(UV–vis) spectral analysis, scanning electron microscopy/energydispersive X-ray spectroscopy(SEM–EDX) and atomic force microscopy(AFM) were done to analyze the potency and also the inhibition efficiency of T. involucrate L. against 1 mol·L^(-1) HCl on low carbon steel. The TPC(145.21 mg GAE·g^(-1)), TFC(52.32 mg QCE·g^(-1)) and antioxidant activities were found to be significant. The electrochemical studies performed by AC impedance measurements showed significant changes in impedance spectra without causing any change in Nyquist plots. An increase in charge transfer resistance(Rct) values, a blockage in active sites exhibiting cathodic and anodic inhibition shows the action of inhibitor on low carbon steel. This was later confirmed by FT-IR and UV–vis which showed variation in absorption band at 270 nm and273 nm(before immersion) and 208 and 281 nm(after immersion). The same was tested again by SEM–EDX through altered strength of iron and oxygen bands and using AFM by analyzing the change in average roughness values of low carbon steel before(61.65 nm) and after(97.87 nm) exposure to blank acid without inhibitor, while it was shifted to 81.58 nm in acid with inhibitor. All these results showed strong evidence adding values to T. involucrate L. plant extract in inhibiting corrosion on low carbon steel and by promoting antioxidant importance of the extract which helps in scavenging free radicals.展开更多
基金CDC/NIOSH for funding this research(75D30119C05529)。
文摘Control of dust in underground coal mines is critical for mitigating both safety and health hazards.For decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effectiveness of various dust control technologies in coal mines.Recent studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains(CACs)to reduce respirable dust in key operator positions.While detailed dust characterization was not a focus of such studies,this is a growing area of interest.Using preserved filter samples from three previous NIOSH studies,the current work aims to explore the effect of two different scrubbers(one wet and one dry)and a roof bolter CAC on respirable dust composition and particle size distribution.For this,the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive X-ray.Results indicate that dust composition was not appreciably affected by either scrubber or the CAC.However,the wet scrubber and CAC appeared to decrease the overall particle size distribution.Such an effect of the dry scrubber was not consistently observed,but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return air.Aside from the insights gained with respect to the three specific dust control case studies revisited here,this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.
文摘The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry of Au and Cu alloys and associated minerals, and mineralization type. This study is aiming at the genetic history of ore-bearing fluid events, geochemical evaluation and exploration significance. The results showed that the mineralization could be considered as a single major episode generated by metamorphic mesothermal solution rich in sulfides and unsaturated respect to Au. It was differentiated into many stages; started with formation of auriferous pyrite that was pseudomorphed by secondary hematite, limonite and goethite. Three phases of Au alloy were precipitated, and Cu＋Sn and Ag-rich alloys were produced respectively and followed by deposition of two generations of barren pyrite. Calcite and ankerite were crystalized, surrounded and partially replaced some of early formed minerals. Finally, barren muscovite recrystallized around and inside both later formed carbonate minerals that were free of any sign of Au in their structures. The processes of deformation, recrystallization, annealing, dissolution, remobilization and re-precipitation played the most important roles in the genetic history of the mineralization.
文摘Corrosion inhibition characteristics of bio polymer dextran was studied for the corrosion control of 6061 Al-15%_((v)) SiC_((P)) composite and its base alloy in 1 mol·L^(-1) HCl. Standard electrochemical techniques such as potentiodynamic polarization(PDP) measurements and electrochemical impedance spectroscopy(EIS) method were adopted for corrosion rate measurement. Surface morphology was studied by scanning electron microscopy(SEM) and elemental mapping was done by energy dispersive X-ray(EDX) analysis. Suitable mechanism was proposed for corrosion and inhibition process. Results indicated that dextran acts as an excellent anticorrosive agent for the corrosion control of 6061 Al-15%_((v)) SiC_((P)) composite, with maximum inhibition efficiency of 91% for the concentration of 0.4 g·L^(-1) at 303 K. Dextran acted as a mixed type of inhibitor, and got physically adsorbed both on composite and base alloy by obeying Langmuir adsorption isotherm. Dextran is proved to be a green inhibitor with environmental and economic benefits.
基金supported by the KU Research Professor Program of Konkuk University
文摘The antioxidant and anticorrosive effect of Tragia involucrate L.(T. involucrate L.) was evaluated to aid in finding new compounds which can be used for various purposes. The total phenolic(TPC) and flavonoid content(TFC),antioxidant activity(DPPH, reducing potential and phosphomolybdenum), and electrochemical measurements,Fourier transform infrared(FT-IR), UV–visible(UV–vis) spectral analysis, scanning electron microscopy/energydispersive X-ray spectroscopy(SEM–EDX) and atomic force microscopy(AFM) were done to analyze the potency and also the inhibition efficiency of T. involucrate L. against 1 mol·L^(-1) HCl on low carbon steel. The TPC(145.21 mg GAE·g^(-1)), TFC(52.32 mg QCE·g^(-1)) and antioxidant activities were found to be significant. The electrochemical studies performed by AC impedance measurements showed significant changes in impedance spectra without causing any change in Nyquist plots. An increase in charge transfer resistance(Rct) values, a blockage in active sites exhibiting cathodic and anodic inhibition shows the action of inhibitor on low carbon steel. This was later confirmed by FT-IR and UV–vis which showed variation in absorption band at 270 nm and273 nm(before immersion) and 208 and 281 nm(after immersion). The same was tested again by SEM–EDX through altered strength of iron and oxygen bands and using AFM by analyzing the change in average roughness values of low carbon steel before(61.65 nm) and after(97.87 nm) exposure to blank acid without inhibitor, while it was shifted to 81.58 nm in acid with inhibitor. All these results showed strong evidence adding values to T. involucrate L. plant extract in inhibiting corrosion on low carbon steel and by promoting antioxidant importance of the extract which helps in scavenging free radicals.
