During the past decades,with the increasing demands in lightweight structural materials,Mg alloys with low density and high performance have been extensively investigated and partly applied in some industries.Especial...During the past decades,with the increasing demands in lightweight structural materials,Mg alloys with low density and high performance have been extensively investigated and partly applied in some industries.Especially when rare earth(RE)elements are added as major alloying elements to Mg alloys,the alloy strength and creep resistance are greatly improved,which have promoted several series of Mg-RE alloys.This paper reviews the progress and developments of high-performance Mg-RE alloys in recent years with emphasis on cast alloys.The main contents include the alloy design,melt purification,grain refinement,castability,novel liquid casting and semisolid forming approaches,and the industrial applications or trials made of Mg-RE alloys.The review will provide insights for future developments of new alloys,techniques and applications of Mg alloys.展开更多
Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivi...Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivity and better thermal stability than yttria-stabilized zirconia(YSZ).However,the low Vickers hardness and toughness are the main shortcomings of RE;TaO-and REjNbOr that limit their applications as TBC materials.To increase the hardness,high entropy(Yu3Ybu3Er/3)sTaOr,(Y13YbnErns)NbO,and(Sm1/6Eu1/6Y 1/6Yb1/6Lu1/6Er1/6)3(Nb1/2Ta1/2)O7 are designed and synthesized in this study.These high entropy ceramics exhibit high Vickers hardness(10.912.0 GPa),close thermal expansion coefficients to that of single-principal-component RE3TaO,and RE;NbO,(7.9×10^-6-10.8×10-6 C-1 at room temperature),good phase stability,and good chemical compatibility with thermally grown Al2O3,which make them promising for applications as candidate TBC materials.展开更多
Ammonia-nitrogen wastewater is produced during the dressing and smelting process of rare-earth ores.Such wastewater includes a very high concentration of NH4＋, as well as other ions（e.g., NH4＋, RE3＋, Al3＋, Fe3＋,...Ammonia-nitrogen wastewater is produced during the dressing and smelting process of rare-earth ores.Such wastewater includes a very high concentration of NH4＋, as well as other ions（e.g., NH4＋, RE3＋, Al3＋, Fe3＋, Ca2＋, Cl–, and Si O32–） with a p H of 5.4–5.6.Its direct discharge will pollute, yet it can be recycled and used as a leaching reagent for ionic rare-earth ores.In this study, leaching kinetics studies of both rare earth ions and impurity ion Al3＋ were conducted in the ammonia-nitrogen wastewater system with the aid of impurity inhibitors.Results showed that the leaching process of rare-earth followed the internal diffusion kinetic model.When the temperature was 298 K and the concentration of NH4＋ was 0.3 mol/L, the leaching reaction rate constant of ionic rare-earth was 1.72 and the apparent activation energy was 9.619 k J/mol.The leaching rate was higher than that of conventional leaching system with ammonium sulfate, which indicated that ammonia-nitrogen wastewater system and the addition of impurity inhibitors could promote ionic rare-earth leaching.The leaching kinetic process of impurity Al3＋ did not follow either internal diffusion kinetic model or chemical reaction control, but the hybrid control model which was affected by a number of process factors.Thus, during the industrial production the leaching of impurity ions could be reduced by increasing the concentration of impurity inhibitors, reducing the leaching temperature to a proper range, accelerating the seepage velocity of leaching solution, or increasing the leaching rate of rare earths.展开更多
As catalytic materials, nanometer rare earth perovskites LaMnO3 were prepared by NaOH-Na2CO3 coprecipitation, followed by supercritical drying, vacuum drying and air drying respectively. The effect of drying processes...As catalytic materials, nanometer rare earth perovskites LaMnO3 were prepared by NaOH-Na2CO3 coprecipitation, followed by supercritical drying, vacuum drying and air drying respectively. The effect of drying processes was studied on the catalyst performance through XRD, TEM, SEM and BET analysis. The results demonstrated that about 30 nm LaMnO3 particles could be prepared by three drying processes respectively. The catalyst materials LaMnO3 dried in vacuum presented the largest specific surface area as 28.71 m2·g－ 1. Compared to the catalyst prepared by dipping cordierite directly in the salt solutions, nanometer LaMnO3 showed better catalytic activity. The light-off temperatures for CO and HC oxidation were both lowered by 100℃ , and its NOx conversion could be up to 100％ at 570℃ .展开更多
The surge arrester of 1000 kV gas-insulated substation (GIS) needs ZnO varistor with high voltage gradient to effectively improve the potential distribution along ZnO varistor column inside the metal-oxide surge arres...The surge arrester of 1000 kV gas-insulated substation (GIS) needs ZnO varistor with high voltage gradient to effectively improve the potential distribution along ZnO varistor column inside the metal-oxide surge arresters. In this paper, the elec-trical and structural parameters of ZnO varistors are changed by doping with some rare-earth oxides, and the mechanism which leads these changes is discussed. When rare-earth oxide additives are added into ZnO varistors, the growing speed is slowed down due to the stabilization of the new spinel phases formed in the grain-boundary by rare-earth oxide additives, then the size of ZnO grains is smaller, and the voltage gradient of varistor increases obviously. By adding suitable amount of oxides of metal Co and Mn, the leakage current can be effectively decreased and the nonlinearity coefficient increased. The novel ZnO varistor samples sintered with the optimal additives have a voltage gradient of 492 V/mm, and the nonlinearity coefficient of 76, but their leakage currents are only 1 μA.展开更多
基金This work is supported by the National Natural Science Foundation of China(Grant Nos.51775334,51821001 and 51701124)National Key Research and Development Program of China(Grant No.2016YFB0701205)+3 种基金China Postdoctoral Science Foundation(Grant No.2020M671360)Natural Science Foundation for Young of Jiangsu Province(Grant No.BK20190863)Jiangsu“Mass Innovation and Entrepreneurship”Talent Program(Shuang Chuang Ph.Ds,2018)Open Research Fund of the State Key Laboratory of Metal Matrix Composites(Grant No.sklmmc-kf18-08).
文摘During the past decades,with the increasing demands in lightweight structural materials,Mg alloys with low density and high performance have been extensively investigated and partly applied in some industries.Especially when rare earth(RE)elements are added as major alloying elements to Mg alloys,the alloy strength and creep resistance are greatly improved,which have promoted several series of Mg-RE alloys.This paper reviews the progress and developments of high-performance Mg-RE alloys in recent years with emphasis on cast alloys.The main contents include the alloy design,melt purification,grain refinement,castability,novel liquid casting and semisolid forming approaches,and the industrial applications or trials made of Mg-RE alloys.The review will provide insights for future developments of new alloys,techniques and applications of Mg alloys.
基金This study was financially supported by the National Natural Science Foundation of China(Nos.51672064 and 51972089).
文摘Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivity and better thermal stability than yttria-stabilized zirconia(YSZ).However,the low Vickers hardness and toughness are the main shortcomings of RE;TaO-and REjNbOr that limit their applications as TBC materials.To increase the hardness,high entropy(Yu3Ybu3Er/3)sTaOr,(Y13YbnErns)NbO,and(Sm1/6Eu1/6Y 1/6Yb1/6Lu1/6Er1/6)3(Nb1/2Ta1/2)O7 are designed and synthesized in this study.These high entropy ceramics exhibit high Vickers hardness(10.912.0 GPa),close thermal expansion coefficients to that of single-principal-component RE3TaO,and RE;NbO,(7.9×10^-6-10.8×10-6 C-1 at room temperature),good phase stability,and good chemical compatibility with thermally grown Al2O3,which make them promising for applications as candidate TBC materials.
基金Project supported by National Natural Science Foundation of China(51164010)the Natural Science Foundation of Jiangxi Province(2010GZC0048)
文摘Ammonia-nitrogen wastewater is produced during the dressing and smelting process of rare-earth ores.Such wastewater includes a very high concentration of NH4＋, as well as other ions（e.g., NH4＋, RE3＋, Al3＋, Fe3＋, Ca2＋, Cl–, and Si O32–） with a p H of 5.4–5.6.Its direct discharge will pollute, yet it can be recycled and used as a leaching reagent for ionic rare-earth ores.In this study, leaching kinetics studies of both rare earth ions and impurity ion Al3＋ were conducted in the ammonia-nitrogen wastewater system with the aid of impurity inhibitors.Results showed that the leaching process of rare-earth followed the internal diffusion kinetic model.When the temperature was 298 K and the concentration of NH4＋ was 0.3 mol/L, the leaching reaction rate constant of ionic rare-earth was 1.72 and the apparent activation energy was 9.619 k J/mol.The leaching rate was higher than that of conventional leaching system with ammonium sulfate, which indicated that ammonia-nitrogen wastewater system and the addition of impurity inhibitors could promote ionic rare-earth leaching.The leaching kinetic process of impurity Al3＋ did not follow either internal diffusion kinetic model or chemical reaction control, but the hybrid control model which was affected by a number of process factors.Thus, during the industrial production the leaching of impurity ions could be reduced by increasing the concentration of impurity inhibitors, reducing the leaching temperature to a proper range, accelerating the seepage velocity of leaching solution, or increasing the leaching rate of rare earths.
文摘As catalytic materials, nanometer rare earth perovskites LaMnO3 were prepared by NaOH-Na2CO3 coprecipitation, followed by supercritical drying, vacuum drying and air drying respectively. The effect of drying processes was studied on the catalyst performance through XRD, TEM, SEM and BET analysis. The results demonstrated that about 30 nm LaMnO3 particles could be prepared by three drying processes respectively. The catalyst materials LaMnO3 dried in vacuum presented the largest specific surface area as 28.71 m2·g－ 1. Compared to the catalyst prepared by dipping cordierite directly in the salt solutions, nanometer LaMnO3 showed better catalytic activity. The light-off temperatures for CO and HC oxidation were both lowered by 100℃ , and its NOx conversion could be up to 100％ at 570℃ .
基金Supported by the National Nature Science Foundation of China (Grant Nos. 50425721 and 50737001)the 11th Five-Year National S&T Supporting Plan (Grant No. 2006BAA02A16)
文摘The surge arrester of 1000 kV gas-insulated substation (GIS) needs ZnO varistor with high voltage gradient to effectively improve the potential distribution along ZnO varistor column inside the metal-oxide surge arresters. In this paper, the elec-trical and structural parameters of ZnO varistors are changed by doping with some rare-earth oxides, and the mechanism which leads these changes is discussed. When rare-earth oxide additives are added into ZnO varistors, the growing speed is slowed down due to the stabilization of the new spinel phases formed in the grain-boundary by rare-earth oxide additives, then the size of ZnO grains is smaller, and the voltage gradient of varistor increases obviously. By adding suitable amount of oxides of metal Co and Mn, the leakage current can be effectively decreased and the nonlinearity coefficient increased. The novel ZnO varistor samples sintered with the optimal additives have a voltage gradient of 492 V/mm, and the nonlinearity coefficient of 76, but their leakage currents are only 1 μA.
