In recent years,a new type of foundation named composite piled raft foundation (also called long short composite piled raft) has been developed.Where designing shallow foundations would mean unacceptable settlement,or...In recent years,a new type of foundation named composite piled raft foundation (also called long short composite piled raft) has been developed.Where designing shallow foundations would mean unacceptable settlement,or other environmental risks exist which could impair the structure in the future,composite piled raft foundations could be used.Finite element method was applied to study the behavior of this type of foundation subjected to vertical loading.In order to determine an optimal pile arrangement pattern which yields the minimum settlement,various pile arrangements under different vertical stress levels were investigated.Results show that with increasing the vertical stress on the raft,the effectiveness of the arrangements of short and long piles become more visible.In addition,a new factor named "composite piled raft efficiency" (CPRE) has been defined which determines the efficiency of long short piles arrangement in a composite piled raft foundation.This factor will increase when short piles take more axial stresses and long piles take less axial stresses.In addition,it is found that the changes in settlements for different long short piles arrangement are in a well agreement with changes in values of CPRE ratio.Thus,CPRE ratio can be used as a factor to determine the efficiency of piles arrangements in composite piled raft foundation from the view point of reducing raft settlements.展开更多
Aim: Heating by nanoparticles, which are located in the tissue to be treated, is a well-recognized method in hyperthermic oncology. Our objective is to investigate selective, nanoscopic heating without concentrating e...Aim: Heating by nanoparticles, which are located in the tissue to be treated, is a well-recognized method in hyperthermic oncology. Our objective is to investigate selective, nanoscopic heating without concentrating extra artificial nanoparticles. We have in silico calculation to study the heating of the transmembrane protein clusters (rafts) on cell-membrane. The transmembrane protein domains have significantly higher dielectric constant than their lipid neighborhood in the membrane. This difference causes a local gradient in the Specific Absorption Rate (SAR), which could be a factor of heating of the membranes locally, as well as exciting the receptors for various signal transduction in the cells. We suppose that this process determines the observed cellular effects of modulated electro-hyperthermia (mEHT, trade-name: oncothermia). Materials and Methods: In silico models with highly specialized software (Computer Simulation Technology (CST), Darmstadt, Germany) were performed visualizing the selectivity for the membrane domains. Local raft models were created to simulate the electromagnetic (EM) effect of a 13.56 MHz excitation between two perfect electrical conductor plates, simulating the equipotential conditions of the sides of the membrane in the vicinity of the raft. The simulations were performed with near-field (EQS) solver of CST. The electric field, current density, and electric loss density were monitored by the simulations. The applied material properties and parameters refer to the recent literature. Results: In silico models show ten times higher energy-absorption of the transmembrane domains than that of its lipid-membrane surrounding, and intra- and extracellular neighborhood. Depending on the size, orientation, and location of the membrane rafts, the value of SAR varies, but we use only two simplified models to see the absorption properties. Taking into account the characteristics of the EM field effects we showed that the selective energy-absorption increased further by the cell-cell interacti展开更多
Galectin-4, a tandem repeat member of the β-galactoside-binding proteins, possesses two carbohydraterecognition domains （CRD） in a single peptide chain. This lectin is mostly expressed in epithelial cells of the in...Galectin-4, a tandem repeat member of the β-galactoside-binding proteins, possesses two carbohydraterecognition domains （CRD） in a single peptide chain. This lectin is mostly expressed in epithelial cells of the intestinal tract and secreted to the extracellular. The two domains have 40% similarity in amino acid sequence, but distinctly binding to various ligands. Just because the two domains bind to different ligands simultaneously, galectin-4 can be a crosslinker and crucial regulator in a large number of biological processes. Recent evidence shows that galectin-4 plays an important role in lipid raft stabilization, protein apical trafficking, cell adhesion, wound healing, intestinal inflammation, tumor progression, etc. This article reviews the physiological and pathological features of galectin-4 and its important role in such processes.展开更多
Poly(p-phenylene-2,6-benzobisoxazole)(PBO) fibers possess excellent dielectric, mechanical properties and heat resistance. However, the surface of PBO fibers is smooth and highly chemical inert, resulting in poor inte...Poly(p-phenylene-2,6-benzobisoxazole)(PBO) fibers possess excellent dielectric, mechanical properties and heat resistance. However, the surface of PBO fibers is smooth and highly chemical inert, resulting in poor interfacial compatibility to polymer matrix, which severely limits its wider application in high-performance fiber-reinforced resin matrix composites. In this work, random copolymers(P(S-co-BCB-co-MMA)) containing benzocyclobutene in the side-chain were synthesized by reversible addition-fragmentation chain transfer(RAFT) polymerization, which were then utilized to form dense random copolymer membrane on the surface of PBO fibers by thermally cross-linking at 250 °C(PBO@P fibers). Four kinds of synthesized P(S-co-BCB-co-MMA) with different number-average molar mass(Mn) were well controlled and possessed narrow dispersity.When the Mnwas 32300, the surface roughness of PBO@P fibers was increased from 11 nm(PBO fibers) to 39 nm. In addition, PBO@P fibers presented the optimal interfacial compatibility with bisphenol A cyanate(BADCy) resins. And the single fiber pull-out strength of PBO@P fibers/BADCy micro-composites was 4.5 MPa, increasing by 45.2% in comparison with that of PBO fibers/BADCy micro-composites(3.1 MPa). Meantime, PBO@P fibers still retained excellent tensile strength(about 5.1 GPa). Overall, this work illustrates a simple and efficient surface functionalization method, which would provide a strong theoretical basis and technical support for controlling the surface structure & chemistry of inert substrates.展开更多
基金Imam Khomeini International University(IKIU)for providing financial support during the research undertaken in the Civil Engineering Department at IKIU,Iran
文摘In recent years,a new type of foundation named composite piled raft foundation (also called long short composite piled raft) has been developed.Where designing shallow foundations would mean unacceptable settlement,or other environmental risks exist which could impair the structure in the future,composite piled raft foundations could be used.Finite element method was applied to study the behavior of this type of foundation subjected to vertical loading.In order to determine an optimal pile arrangement pattern which yields the minimum settlement,various pile arrangements under different vertical stress levels were investigated.Results show that with increasing the vertical stress on the raft,the effectiveness of the arrangements of short and long piles become more visible.In addition,a new factor named "composite piled raft efficiency" (CPRE) has been defined which determines the efficiency of long short piles arrangement in a composite piled raft foundation.This factor will increase when short piles take more axial stresses and long piles take less axial stresses.In addition,it is found that the changes in settlements for different long short piles arrangement are in a well agreement with changes in values of CPRE ratio.Thus,CPRE ratio can be used as a factor to determine the efficiency of piles arrangements in composite piled raft foundation from the view point of reducing raft settlements.
文摘Aim: Heating by nanoparticles, which are located in the tissue to be treated, is a well-recognized method in hyperthermic oncology. Our objective is to investigate selective, nanoscopic heating without concentrating extra artificial nanoparticles. We have in silico calculation to study the heating of the transmembrane protein clusters (rafts) on cell-membrane. The transmembrane protein domains have significantly higher dielectric constant than their lipid neighborhood in the membrane. This difference causes a local gradient in the Specific Absorption Rate (SAR), which could be a factor of heating of the membranes locally, as well as exciting the receptors for various signal transduction in the cells. We suppose that this process determines the observed cellular effects of modulated electro-hyperthermia (mEHT, trade-name: oncothermia). Materials and Methods: In silico models with highly specialized software (Computer Simulation Technology (CST), Darmstadt, Germany) were performed visualizing the selectivity for the membrane domains. Local raft models were created to simulate the electromagnetic (EM) effect of a 13.56 MHz excitation between two perfect electrical conductor plates, simulating the equipotential conditions of the sides of the membrane in the vicinity of the raft. The simulations were performed with near-field (EQS) solver of CST. The electric field, current density, and electric loss density were monitored by the simulations. The applied material properties and parameters refer to the recent literature. Results: In silico models show ten times higher energy-absorption of the transmembrane domains than that of its lipid-membrane surrounding, and intra- and extracellular neighborhood. Depending on the size, orientation, and location of the membrane rafts, the value of SAR varies, but we use only two simplified models to see the absorption properties. Taking into account the characteristics of the EM field effects we showed that the selective energy-absorption increased further by the cell-cell interacti
文摘Galectin-4, a tandem repeat member of the β-galactoside-binding proteins, possesses two carbohydraterecognition domains （CRD） in a single peptide chain. This lectin is mostly expressed in epithelial cells of the intestinal tract and secreted to the extracellular. The two domains have 40% similarity in amino acid sequence, but distinctly binding to various ligands. Just because the two domains bind to different ligands simultaneously, galectin-4 can be a crosslinker and crucial regulator in a large number of biological processes. Recent evidence shows that galectin-4 plays an important role in lipid raft stabilization, protein apical trafficking, cell adhesion, wound healing, intestinal inflammation, tumor progression, etc. This article reviews the physiological and pathological features of galectin-4 and its important role in such processes.
基金support and funding from National Scientific Research ProjectSpace Supporting Fund from China Aerospace Science and Industry Corporation (2019-HT-XG)+1 种基金Fundamental Research Funds for the Central Universities (310201911qd003)China Postdoctoral Science Foundation (2019M653735)。
文摘Poly(p-phenylene-2,6-benzobisoxazole)(PBO) fibers possess excellent dielectric, mechanical properties and heat resistance. However, the surface of PBO fibers is smooth and highly chemical inert, resulting in poor interfacial compatibility to polymer matrix, which severely limits its wider application in high-performance fiber-reinforced resin matrix composites. In this work, random copolymers(P(S-co-BCB-co-MMA)) containing benzocyclobutene in the side-chain were synthesized by reversible addition-fragmentation chain transfer(RAFT) polymerization, which were then utilized to form dense random copolymer membrane on the surface of PBO fibers by thermally cross-linking at 250 °C(PBO@P fibers). Four kinds of synthesized P(S-co-BCB-co-MMA) with different number-average molar mass(Mn) were well controlled and possessed narrow dispersity.When the Mnwas 32300, the surface roughness of PBO@P fibers was increased from 11 nm(PBO fibers) to 39 nm. In addition, PBO@P fibers presented the optimal interfacial compatibility with bisphenol A cyanate(BADCy) resins. And the single fiber pull-out strength of PBO@P fibers/BADCy micro-composites was 4.5 MPa, increasing by 45.2% in comparison with that of PBO fibers/BADCy micro-composites(3.1 MPa). Meantime, PBO@P fibers still retained excellent tensile strength(about 5.1 GPa). Overall, this work illustrates a simple and efficient surface functionalization method, which would provide a strong theoretical basis and technical support for controlling the surface structure & chemistry of inert substrates.
