Pt-Ru, Pt and Ru catalysts supported on zirconia were prepared by impregnation method and were tested in selective oxidation of methylamine （MA） in aqueous media. Among three catalysts, Ru/ZrO2 was more active than ...Pt-Ru, Pt and Ru catalysts supported on zirconia were prepared by impregnation method and were tested in selective oxidation of methylamine （MA） in aqueous media. Among three catalysts, Ru/ZrO2 was more active than Pt/ZrO2 while Pt-Ru/ZrO2 demonstrated the best catalytic activity due to the fact that Pt addition efficiently promoted the dispersion of active species in bimetallic catalyst. Therefore, the - 100% TOC conversion and N2 selectivity were achieved over Pt-Ru/ZrO2, Pt/ZrO2 and Ru/ZrO2 catalysts at 190, 220 and 250 ℃, respectively.展开更多
Polymer-stabilized platinum/ruthenium bimetallic colloids （Pt/Ru） were synthesized by polyol reduction with microwave irradiation and characterized by TEM and XPS. The colloidal nanoparticles have small and narrow s...Polymer-stabilized platinum/ruthenium bimetallic colloids （Pt/Ru） were synthesized by polyol reduction with microwave irradiation and characterized by TEM and XPS. The colloidal nanoparticles have small and narrow size distributions. Catalytic performance of the Pt/Ru colloidal catalysts was investigated on the selective hydrogenation of crontonaldehyde （CRAL）. A suitable amount of the added metal ions and base can improve the selectivity of CRAL to crotylalcohol （CROL） remarkably. The catalytic activity and the selectivity are dependent on the compositions of bimetallic colloids. Thereinto, PVP-stabilized 9Pt/1Ru colloid with a molar ratio of metals Pt：Ru = 9：1 shows the highest catalytic selectivity 77.3% to CROL at 333 K under 4.0 MPa of hydrogen.展开更多
The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle ...The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.展开更多
We present a simple method to increase the efficiency of a direct ethanol fuel cell by a periodic modulation of the load(pulsed mode). The fuel cell was periodically short circuited with a resistor(1 Ω) for a few sec...We present a simple method to increase the efficiency of a direct ethanol fuel cell by a periodic modulation of the load(pulsed mode). The fuel cell was periodically short circuited with a resistor(1 Ω) for a few seconds(high load period) followed by a low load period of up to 100 s when the resistor was disconnected. The open circuit voltage(OCV) values before and after the short circuit of the cell showed an increase of up to 70 mV. The higher OCV was due to the oxidation and removal of strongly adsorbed CO during the electric short circuit when the electric potential of the anode was increased to be close to the cathode potential. The depoisoned anode surface was much more active directly after the short circuit. The slow decrease of the OCV observed after the short circuit was caused by the subsequent poisoning of the anode surface, which can be neutralized by another short circuit. In general, a stable increase in cell performance was obtained by repetition of the electric short circuit. The data showed that the pulse mode gave an increase in the power generated by the direct ethanol fuel cell by up to 51% and was 6% on average. It is anticipated that this mode of operation can be used also in different types of polymer electrolyte membrane fuel cells where CO poisoning is a problem, and after optimization of the parameters, a much higher gain in efficien-cy can be obtained.展开更多
基金Supported by the National Natural Science Foundation of China(21373245,21173242)the State Key Development Program for Basic Research of China(2013CB632404)+1 种基金the National High Technology Research and Development Program of China(2012AA051501)the Project Support of Gansu Provincial Science &Technology Department(1304FKCA085)
文摘Pt-Ru, Pt and Ru catalysts supported on zirconia were prepared by impregnation method and were tested in selective oxidation of methylamine （MA） in aqueous media. Among three catalysts, Ru/ZrO2 was more active than Pt/ZrO2 while Pt-Ru/ZrO2 demonstrated the best catalytic activity due to the fact that Pt addition efficiently promoted the dispersion of active species in bimetallic catalyst. Therefore, the - 100% TOC conversion and N2 selectivity were achieved over Pt-Ru/ZrO2, Pt/ZrO2 and Ru/ZrO2 catalysts at 190, 220 and 250 ℃, respectively.
基金This work was supported by the National Natural Science Foundation of China(Nos.29774037,29873058)the Chinese Academy of Sciences(No.KJ952-J1-508)is gratefully acknowledged.
文摘Polymer-stabilized platinum/ruthenium bimetallic colloids （Pt/Ru） were synthesized by polyol reduction with microwave irradiation and characterized by TEM and XPS. The colloidal nanoparticles have small and narrow size distributions. Catalytic performance of the Pt/Ru colloidal catalysts was investigated on the selective hydrogenation of crontonaldehyde （CRAL）. A suitable amount of the added metal ions and base can improve the selectivity of CRAL to crotylalcohol （CROL） remarkably. The catalytic activity and the selectivity are dependent on the compositions of bimetallic colloids. Thereinto, PVP-stabilized 9Pt/1Ru colloid with a molar ratio of metals Pt：Ru = 9：1 shows the highest catalytic selectivity 77.3% to CROL at 333 K under 4.0 MPa of hydrogen.
文摘The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.
基金supported by the Ministry of Science and Higher Education (Poland) under the grant N N204 527739
文摘We present a simple method to increase the efficiency of a direct ethanol fuel cell by a periodic modulation of the load(pulsed mode). The fuel cell was periodically short circuited with a resistor(1 Ω) for a few seconds(high load period) followed by a low load period of up to 100 s when the resistor was disconnected. The open circuit voltage(OCV) values before and after the short circuit of the cell showed an increase of up to 70 mV. The higher OCV was due to the oxidation and removal of strongly adsorbed CO during the electric short circuit when the electric potential of the anode was increased to be close to the cathode potential. The depoisoned anode surface was much more active directly after the short circuit. The slow decrease of the OCV observed after the short circuit was caused by the subsequent poisoning of the anode surface, which can be neutralized by another short circuit. In general, a stable increase in cell performance was obtained by repetition of the electric short circuit. The data showed that the pulse mode gave an increase in the power generated by the direct ethanol fuel cell by up to 51% and was 6% on average. It is anticipated that this mode of operation can be used also in different types of polymer electrolyte membrane fuel cells where CO poisoning is a problem, and after optimization of the parameters, a much higher gain in efficien-cy can be obtained.
