期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Advances in phase stabilization techniques of AN using KDN and other chemical compounds for preparing green oxidizers 被引量:2
1
作者 Pratim Kumar 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2019年第6期949-957,共9页
Research and development of green oxidizers and green fuels as a possible replacement for ammonium perchlorate(NH4ClO4,AP) and hydrazine(N2H4) respectively has been increased considerably in the recent years.AP and hy... Research and development of green oxidizers and green fuels as a possible replacement for ammonium perchlorate(NH4ClO4,AP) and hydrazine(N2H4) respectively has been increased considerably in the recent years.AP and hydrazine are the oxidizer and fuel entities,and used in solid and liquid rocket motors respectively.AP is highly toxic and led to adverse health effects,while hydrazine is carcinogenic in nature.AP is in use from the last several decades for rocket and space shuttle propulsion,while hydrazine is used in upper stage liquid propelled rocket motors.It’s a tough task to replace AP with the currently available green oxidizers;since their ballistic properties are weaker when compared to AP and also they can’t be successfully deployed in a solid rocket motor at present Some important available solid green oxidizers are ammonium nitrate(AN),ammonium dinitramide(ADN),hydroxyl ammonium nitrate(HAN),and hydrazinium nitroformate(HNF).However,AN is one of the cheap and readily available oxidizer,and has great potential to use in solid/liquid rocket motors.Tremendous progress has been envisaged till now,and more progress will be there in the coming future over the development of AN based green energetic materials(GEM’s).A concise overview has been presented over the development of phase stabilized ammonium nitrate(PSAN) and AN/KDN based green oxidizers in the present review paper. 展开更多
关键词 Green oxidizers ammonium nitrate(AN) phase stabilized ammonium nitrate(psan) Dinitramide anion(DA) Potassium dinitramide(KDN) phase stabilizers
下载PDF
HTPE推进剂热分解特性研究 被引量:4
2
作者 李辉 李苗苗 +5 位作者 陈愿 徐森 刘大斌 张伟 郑亭亭 陈静静 《上海航天》 CSCD 2018年第1期132-139,共8页
利用差示扫描量热法(DSC)得到端羟基聚醚(HTPE)推进剂(H01和H02)在不同升温速率下热分解曲线,用Kissinger公式和Ozawa公式计算了H01和H02热分解的表观活化能;利用绝热加速量热仪(ARC)对H01和H02进行绝热量热测试,得到H01和H02的热分解... 利用差示扫描量热法(DSC)得到端羟基聚醚(HTPE)推进剂(H01和H02)在不同升温速率下热分解曲线,用Kissinger公式和Ozawa公式计算了H01和H02热分解的表观活化能;利用绝热加速量热仪(ARC)对H01和H02进行绝热量热测试,得到H01和H02的热分解特性参数。结果表明:HTPE推进剂(基础配方为HTPE/A3/AP/Al/PSAN)中相稳定硝酸铵(PSAN)/高氯酸铵(AP)含量比值增加对推进剂的初始分解峰影响不大,HTPE推进剂的第一步分解是增塑剂A3的热分解,H01和H02的表观活化能分别为127.28kJ·mol^(-1)和123.43kJ·mol^(-1);在绝热条件下,H01的起始分解温度较高(147.78℃),高于H02的起始分解温度(136.44℃),反应结束后,两种物质系统的最大压力分别为0.709 MPa和0.531 MPa;H01的绝热温升(246.94℃)高于H02(184.47℃),发生热分解反应时,严重度更大,初始的热分解反应更为剧烈。因此,PSAN/AP含量比值增加有助于降低HTPE推进剂在热刺激下的响应程度。 展开更多
关键词 HTPE推进剂 差示扫描量热法(DSC) 绝热加速量热仪(ARC) 表观活化能 热分解特性 A3 相稳定硝酸铵(psan) 分解温度
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部