A robotic fish driven by oscillating fins, 'Cownose Ray-I', is developed, which is in dorsoventrally flattened shape without a tail. The robotic fish is composed of a body and two lateral fins. A three-factor ...A robotic fish driven by oscillating fins, 'Cownose Ray-I', is developed, which is in dorsoventrally flattened shape without a tail. The robotic fish is composed of a body and two lateral fins. A three-factor kinematic model is established and used in the design of a mechanism. By controlling the three kinematic parameters, the robotic fish can accelerate and maneuver. Forward velocity is dependent on the largest amplitude and the number of waves in the fins, while the relative contribution of fin beat frequency to the forward velocity of the robotic fish is different from the usual result. On the other hand, experimental results on maneuvering show that phase difference has a stronger effect on swerving than the largest amplitude to some extent. In addition, as propulsion waves pass from the trailing edge to the leading edge, the robotic fish attains a backward velocity of 0. 15 m·s^(-1).展开更多
Winding is an important part of the electrical machine and plays a key role in reliability.In this paper,the reliability of multiphase winding structure in permanent magnet machines is evaluated based on the Markov mo...Winding is an important part of the electrical machine and plays a key role in reliability.In this paper,the reliability of multiphase winding structure in permanent magnet machines is evaluated based on the Markov model.The mean time to failure is used to compare the reliability of different windings structure.The mean time to failure of multiphase winding is derived in terms of the underlying parameters.The mean time to failure of winding is affected by the number of phases,the winding failure rate,the fault-tolerant mechanism success probability,and the state transition success probability.The influence of the phase number,winding distribution types,multi three-phase structure,and fault-tolerant mechanism success probability on the winding reliability is investigated.The results of reliability analysis lay the foundation for the reliability design of permanent magnet machines.展开更多
The gas-liquid two-phase swirl flow can increase the gas-liquid two-phase contact area and enhance the heat and mass transfer efficiency between gas and liquid.The swirl flow has important practical application value ...The gas-liquid two-phase swirl flow can increase the gas-liquid two-phase contact area and enhance the heat and mass transfer efficiency between gas and liquid.The swirl flow has important practical application value for promoting gas hydrate formation and ensuring the flow safe of natural gas hydrate slurry.The experimental section was made of plexiglass pipe and the experimental medium was air and water.The flow pattern of the gas-liquid two-phase swirl flow in the horizontal pipe was divided,according to a high-definition camera and the overall characteristics of the gas-liquid interface.The flow pattern map of the gas-liquid two-phase swirl flow in a horizontal pipe was studied.The influence of the flow velocity and vane parameters on pressure drop was investigated.Two types of gas-liquid two-phase swirl flow pressure drop models was established.The homogeneous-phase and split-phase pressure drop models have good prediction on swirl bubble flow,swirl dispersed flow,swirl annular flow and swirl stratified flow,and the predictive error band is not more than 20%.展开更多
Understanding fingering, as a challenge to stable displacement during the immiscible flow, has become a crucial phenomenon for geological carbon sequestration, enhanced oil recovery, and groundwater protection. Typica...Understanding fingering, as a challenge to stable displacement during the immiscible flow, has become a crucial phenomenon for geological carbon sequestration, enhanced oil recovery, and groundwater protection. Typically governed by gravity, viscous and capillary forces, these factors lead invasive fluids to occupy pore space irregularly and incompletely. Previous studies have demonstrated capillary numbers,describing the viscous and capillary forces, to quantificationally induce evolution of invasion patterns.While the evolution mechanisms of invasive patterns have not been deeply elucidated under the constant capillary number and three variable parameters including velocity, viscosity, and interfacial tension.Our research employs two horizontal visualization systems and a two-phase laminar flow simulation to investigate the tendency of invasive pattern transition by various parameters at the pore scale. We showed that increasing invasive viscosity or reducing interfacial tension in a homogeneous pore space significantly enhanced sweep efficiency, under constant capillary number. Additionally, in the fingering crossover pattern, the region near the inlet was prone to capillary fingering with multi-directional invasion, while the viscous fingering with unidirectional invasion was more susceptible occurred in the region near the outlet. Furthermore, increasing invasive viscosity or decreasing invasive velocity and interfacial tension promoted the extension of viscous fingering from the outlet to the inlet, presenting that the subsequent invasive fluid flows toward the outlet. In the case of invasive trunk along a unidirectional path, the invasive flow increased exponentially closer to the outlet, resulting in a significant decrease in the width of the invasive interface. Our work holds promising applications for optimizing invasive patterns in heterogeneous porous media.展开更多
The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage dev...The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage device filled with magnetic nanoencapsulated phase change materials(NEPCMs).The versatile finite element method(FEM)is implemented to numerically solve the governing equations.The effects of various parameters,including the viscosity parameter,ranging from 1 to 3,the thermal conductivity parameter,ranging from 1 to 3,the Rayleigh parameter,ranging from 102 to 3×10^(2),the radiation number,ranging from 0.1 to 0.5,the fusion temperature,ranging from 1.0 to 1.2,the volume fraction of NEPCMs,ranging from 2%to 6%,the Stefan number,ranging from 1 to 5,the magnetic number,ranging from 0.1 to 0.5,and the irreversibility parameter,ranging from 0.1 to 0.5,are examined in detail on the temperature contours,isentropic lines,heat capacity ratio,and velocity fields.Furthermore,the heat transfer rates at both the cold and hot walls are analyzed,and the findings are presented graphically.The results indicate that the time taken by the NEPCMs to transition from solid to liquid is prolonged inside the chamber region as the fusion temperatureθf increases.Additionally,the contours of the heat capacity ratio Cr decrease with the increase in the Stefan number Ste.展开更多
The creations and manipulations of vortexes in ferroelectric materials with external stimuli are expected to be used in the design and fabrication of sensing materials and multifunctional electronic devices.In this wo...The creations and manipulations of vortexes in ferroelectric materials with external stimuli are expected to be used in the design and fabrication of sensing materials and multifunctional electronic devices.In this work,we investigated the surface charge-induced multi-vortex evolution using the phase-field simulations in BiFeO_(3).A combination of domain morphology,polarization distribution and winding number calculation was considered.The results show that vortex and anti-vortex exist simultaneously in pairs,and the total value of winding numbers is always 0.In addition,the minimum distanceΔl between the surface charge regions is 9 nm when the vortex domains are independent of each other.This work provides a reference for the manipulation of ferroelectric vortex induced by surface charges,which lays a theoretical foundation for the design and fabrication of high-density vortex memories.展开更多
In this pedagogically oriented review,we discuss the concept of Berry phase in quantum physics,paying particular attention to their manifestation in Bloch electrons.We have discussed,within the limited scope and passa...In this pedagogically oriented review,we discuss the concept of Berry phase in quantum physics,paying particular attention to their manifestation in Bloch electrons.We have discussed,within the limited scope and passage,a few examples to illustrate the rich and fascinating manifestations of Berry phase in our understanding of many a physical property of a wide range of materials,including optoelectronic responses and quantum transport properties.It is also demonstrated that various topological phases of current interest are characterized by topological numbers,which are in fact incarnations of the Berry phase.A discussion of various techniques for gauge fixing,which may be important to the computation of Berry phase related properties,is also included.展开更多
The relationship between the types of binary alloy phase diagramsof VIII and Ib group elements and the Men- deleev numbers wasdiscussed for the first time using the VIII and IB group elements assolvent metals (A) and ...The relationship between the types of binary alloy phase diagramsof VIII and Ib group elements and the Men- deleev numbers wasdiscussed for the first time using the VIII and IB group elements assolvent metals (A) and the other elements as solute metals (B),basesd on their alloy phase diagram types. The Mendeleev numbers ofthe solvent metals and the solute metals were expressed as M_A andM_B, respectively. A two-dimension map of M_A/M_B was drawn. It isindi- cated that there is an oblique line in the map, which dividesthe binary alloy phase diagram types of solvent metals into twosymmetry parts, the phase diagram types of the other elements withsolvent metals located at the above or down of the line respectively,while on the line, △M = 0.展开更多
基金The supports of National Natural Science Foundation of China (No.50405006)the supports of the innovation foundation of graduate students of National University of Defense Technology (No.B060302) are also gratefully acknowledged
文摘A robotic fish driven by oscillating fins, 'Cownose Ray-I', is developed, which is in dorsoventrally flattened shape without a tail. The robotic fish is composed of a body and two lateral fins. A three-factor kinematic model is established and used in the design of a mechanism. By controlling the three kinematic parameters, the robotic fish can accelerate and maneuver. Forward velocity is dependent on the largest amplitude and the number of waves in the fins, while the relative contribution of fin beat frequency to the forward velocity of the robotic fish is different from the usual result. On the other hand, experimental results on maneuvering show that phase difference has a stronger effect on swerving than the largest amplitude to some extent. In addition, as propulsion waves pass from the trailing edge to the leading edge, the robotic fish attains a backward velocity of 0. 15 m·s^(-1).
文摘Winding is an important part of the electrical machine and plays a key role in reliability.In this paper,the reliability of multiphase winding structure in permanent magnet machines is evaluated based on the Markov model.The mean time to failure is used to compare the reliability of different windings structure.The mean time to failure of multiphase winding is derived in terms of the underlying parameters.The mean time to failure of winding is affected by the number of phases,the winding failure rate,the fault-tolerant mechanism success probability,and the state transition success probability.The influence of the phase number,winding distribution types,multi three-phase structure,and fault-tolerant mechanism success probability on the winding reliability is investigated.The results of reliability analysis lay the foundation for the reliability design of permanent magnet machines.
基金Project(51574045)supported by the National Nature Science Foundation of China
文摘The gas-liquid two-phase swirl flow can increase the gas-liquid two-phase contact area and enhance the heat and mass transfer efficiency between gas and liquid.The swirl flow has important practical application value for promoting gas hydrate formation and ensuring the flow safe of natural gas hydrate slurry.The experimental section was made of plexiglass pipe and the experimental medium was air and water.The flow pattern of the gas-liquid two-phase swirl flow in the horizontal pipe was divided,according to a high-definition camera and the overall characteristics of the gas-liquid interface.The flow pattern map of the gas-liquid two-phase swirl flow in a horizontal pipe was studied.The influence of the flow velocity and vane parameters on pressure drop was investigated.Two types of gas-liquid two-phase swirl flow pressure drop models was established.The homogeneous-phase and split-phase pressure drop models have good prediction on swirl bubble flow,swirl dispersed flow,swirl annular flow and swirl stratified flow,and the predictive error band is not more than 20%.
基金supported by the National Natural Science Foundation of China Joint Fund Project (Grant/Award Number: U20B6003)National Natural Science Foundation of China (Grant/Award Number: 52304054)。
文摘Understanding fingering, as a challenge to stable displacement during the immiscible flow, has become a crucial phenomenon for geological carbon sequestration, enhanced oil recovery, and groundwater protection. Typically governed by gravity, viscous and capillary forces, these factors lead invasive fluids to occupy pore space irregularly and incompletely. Previous studies have demonstrated capillary numbers,describing the viscous and capillary forces, to quantificationally induce evolution of invasion patterns.While the evolution mechanisms of invasive patterns have not been deeply elucidated under the constant capillary number and three variable parameters including velocity, viscosity, and interfacial tension.Our research employs two horizontal visualization systems and a two-phase laminar flow simulation to investigate the tendency of invasive pattern transition by various parameters at the pore scale. We showed that increasing invasive viscosity or reducing interfacial tension in a homogeneous pore space significantly enhanced sweep efficiency, under constant capillary number. Additionally, in the fingering crossover pattern, the region near the inlet was prone to capillary fingering with multi-directional invasion, while the viscous fingering with unidirectional invasion was more susceptible occurred in the region near the outlet. Furthermore, increasing invasive viscosity or decreasing invasive velocity and interfacial tension promoted the extension of viscous fingering from the outlet to the inlet, presenting that the subsequent invasive fluid flows toward the outlet. In the case of invasive trunk along a unidirectional path, the invasive flow increased exponentially closer to the outlet, resulting in a significant decrease in the width of the invasive interface. Our work holds promising applications for optimizing invasive patterns in heterogeneous porous media.
文摘The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage device filled with magnetic nanoencapsulated phase change materials(NEPCMs).The versatile finite element method(FEM)is implemented to numerically solve the governing equations.The effects of various parameters,including the viscosity parameter,ranging from 1 to 3,the thermal conductivity parameter,ranging from 1 to 3,the Rayleigh parameter,ranging from 102 to 3×10^(2),the radiation number,ranging from 0.1 to 0.5,the fusion temperature,ranging from 1.0 to 1.2,the volume fraction of NEPCMs,ranging from 2%to 6%,the Stefan number,ranging from 1 to 5,the magnetic number,ranging from 0.1 to 0.5,and the irreversibility parameter,ranging from 0.1 to 0.5,are examined in detail on the temperature contours,isentropic lines,heat capacity ratio,and velocity fields.Furthermore,the heat transfer rates at both the cold and hot walls are analyzed,and the findings are presented graphically.The results indicate that the time taken by the NEPCMs to transition from solid to liquid is prolonged inside the chamber region as the fusion temperatureθf increases.Additionally,the contours of the heat capacity ratio Cr decrease with the increase in the Stefan number Ste.
基金supported financially by the National Key Research and Development Program of China(Grant No.2019YFA0307900),the National Natural Science Foundation of China(Grant Nos.51972028 and 12004036)and the China Postdoctoral Science Foundation(Grant No.2020M680375).This project is also supported by Young Elite Scientists Sponsorship Program by BAST(No.BYFSS2023072)State Key Laboratory of New Ceramic and Fine Processing Tsinghua University(No.KFZD202201).
文摘The creations and manipulations of vortexes in ferroelectric materials with external stimuli are expected to be used in the design and fabrication of sensing materials and multifunctional electronic devices.In this work,we investigated the surface charge-induced multi-vortex evolution using the phase-field simulations in BiFeO_(3).A combination of domain morphology,polarization distribution and winding number calculation was considered.The results show that vortex and anti-vortex exist simultaneously in pairs,and the total value of winding numbers is always 0.In addition,the minimum distanceΔl between the surface charge regions is 9 nm when the vortex domains are independent of each other.This work provides a reference for the manipulation of ferroelectric vortex induced by surface charges,which lays a theoretical foundation for the design and fabrication of high-density vortex memories.
基金supported by the National Natural Science Foundation of China(Grant No.11725415)
文摘In this pedagogically oriented review,we discuss the concept of Berry phase in quantum physics,paying particular attention to their manifestation in Bloch electrons.We have discussed,within the limited scope and passage,a few examples to illustrate the rich and fascinating manifestations of Berry phase in our understanding of many a physical property of a wide range of materials,including optoelectronic responses and quantum transport properties.It is also demonstrated that various topological phases of current interest are characterized by topological numbers,which are in fact incarnations of the Berry phase.A discussion of various techniques for gauge fixing,which may be important to the computation of Berry phase related properties,is also included.
文摘The relationship between the types of binary alloy phase diagramsof VIII and Ib group elements and the Men- deleev numbers wasdiscussed for the first time using the VIII and IB group elements assolvent metals (A) and the other elements as solute metals (B),basesd on their alloy phase diagram types. The Mendeleev numbers ofthe solvent metals and the solute metals were expressed as M_A andM_B, respectively. A two-dimension map of M_A/M_B was drawn. It isindi- cated that there is an oblique line in the map, which dividesthe binary alloy phase diagram types of solvent metals into twosymmetry parts, the phase diagram types of the other elements withsolvent metals located at the above or down of the line respectively,while on the line, △M = 0.
