The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)...The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)Ho_(0.2)Y_(0.2)Er_(0.2)Yb_(0.2))_(3)NbO_(7))with hierarchical pore structures were prepared by a particle-stabilized foaming method.Atomic-scale analysis reveals that high entropy causes atom displacement and lattice distortion.The high-entropy ceramic foams exhibit high porosity(90.13%-96.13%)and ultralow thermal conductivity(0.0343-0.0592 W/(m·K))at room temperature.High-entropy ceramic foam prepared by a 20 wt%slurry sintered at 1500℃has the porosity of 96.12%and extremely low thermal conductivity of 0.0343 W/(m·K).The existence of walls and secondary pores contributes to reduced thermal conductivity.There is a temperature difference of over 800℃between frontside and backside of the sample under fire resistance test.The research indicates that these as-prepared high-entropy ceramic foams are expected to be promising thermal insulation materials.展开更多
Alkenyl succinic anhydride(ASA) is a popular paper-sizing agent that is generally added to papermaking systems as an aqueous emulsion. Herein, we reviewed the recent work focusing on ASA emulsions stabilized by solid ...Alkenyl succinic anhydride(ASA) is a popular paper-sizing agent that is generally added to papermaking systems as an aqueous emulsion. Herein, we reviewed the recent work focusing on ASA emulsions stabilized by solid particles. Solid particle-stabilized ASA emulsions generally possess high ASA content and exhibit good sizing performance. The particles that have been used to stabilize ASA emulsions typically include montmorillonite, laponite, alumina, TiO_2, Fe_3O_4, polyaluminum sulfate(PAS), and cellulose nanocrystals(CNCs). Montmorillonite is the first extensively studied particle stabilizer for ASA emulsions. Laponite is undoubtedly the most competent particle stabilizer for preparing ASA emulsions with high sizing efficiency. Montmorillonite and laponite can be used individually as stabilizers after modification or as co-stabilizers with other particles or polymers. TiO_2, alumina, PAS, and CNCs are commonly used as stabilizers either individually or with other particles.展开更多
基金supported by the National Natural Science Foundation of China(No.52072301)the State Key Laboratory of Solidification Processing(NPU)(No.2021-TS-08)+3 种基金the State Key Laboratory of New Ceramic and Fine Processing Tsinghua University(No.KFZD202102)the China-Poland International Collaboration Fund of National Natural Science Foundation of China(No.51961135301)the Fundamental Research Funds for the Central Universities(No.D5000210722)State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(No.P2020–009)。
文摘The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)Ho_(0.2)Y_(0.2)Er_(0.2)Yb_(0.2))_(3)NbO_(7))with hierarchical pore structures were prepared by a particle-stabilized foaming method.Atomic-scale analysis reveals that high entropy causes atom displacement and lattice distortion.The high-entropy ceramic foams exhibit high porosity(90.13%-96.13%)and ultralow thermal conductivity(0.0343-0.0592 W/(m·K))at room temperature.High-entropy ceramic foam prepared by a 20 wt%slurry sintered at 1500℃has the porosity of 96.12%and extremely low thermal conductivity of 0.0343 W/(m·K).The existence of walls and secondary pores contributes to reduced thermal conductivity.There is a temperature difference of over 800℃between frontside and backside of the sample under fire resistance test.The research indicates that these as-prepared high-entropy ceramic foams are expected to be promising thermal insulation materials.
基金funded by the National Natural Science Foundation of China(Grant Nos.31270625 and 21406122)
文摘Alkenyl succinic anhydride(ASA) is a popular paper-sizing agent that is generally added to papermaking systems as an aqueous emulsion. Herein, we reviewed the recent work focusing on ASA emulsions stabilized by solid particles. Solid particle-stabilized ASA emulsions generally possess high ASA content and exhibit good sizing performance. The particles that have been used to stabilize ASA emulsions typically include montmorillonite, laponite, alumina, TiO_2, Fe_3O_4, polyaluminum sulfate(PAS), and cellulose nanocrystals(CNCs). Montmorillonite is the first extensively studied particle stabilizer for ASA emulsions. Laponite is undoubtedly the most competent particle stabilizer for preparing ASA emulsions with high sizing efficiency. Montmorillonite and laponite can be used individually as stabilizers after modification or as co-stabilizers with other particles or polymers. TiO_2, alumina, PAS, and CNCs are commonly used as stabilizers either individually or with other particles.
