Hot compression tests of P92 steel at temperatures in the range of 1 173 to 1 523 K and at strain rates in the range of 0.1 to 10 s^-1 were carried out on a Gleeble-3500 thermal-mechanical simulator, and the correspon...Hot compression tests of P92 steel at temperatures in the range of 1 173 to 1 523 K and at strain rates in the range of 0.1 to 10 s^-1 were carried out on a Gleeble-3500 thermal-mechanical simulator, and the corresponding flow curves were measured. The results showed that the flow stress and the peak strain increase with decreasing deformation temperature and increasing strain rate. The critical Z value, below which the complete dynamic reerystallization may occur, was determined to have 4.61 × 10^18. The hot deformation activation energy of the steel was about 437 kJ/mol. The hot deformation equation and the microstructure diagram of P92 steel were obtained. For the convenience of the practical application, the empirical equation for the peak stress can be described as σp=17. 17lnε＋902499/T-524.1.展开更多
Stochastic resonance（SR） enhances the nonlinear system behavior with the assistance of noise, including the sensitivity and selectivity of the response to the exterior stimulus. The energy-transfer mechanism makes t...Stochastic resonance（SR） enhances the nonlinear system behavior with the assistance of noise, including the sensitivity and selectivity of the response to the exterior stimulus. The energy-transfer mechanism makes the weak information revealed in the output spectrum, while the time-waveform is distorted. The distortion analysis was made both from the particle＇s dynan-fics and signal processing. The factors causing the deviation in the output are presented and the function of the recovery system is proposed. By the investigation of the particle＇s motion track in the bistable system and the suggested recovery system, the influences of noise and system parameters on the recovery course were discussed. Moreover, the pulse distortion appearing the recovery waveform caused by the particle＇s transitions at the bistable potential＇ inflexions was explained. Due to different characteristics, cascaded-bistable SR or mono-stable SR was introduced to process different types of signals. The final recovery signal is just the suggested recovery system＇s response to the SR output. Meanwhile, the recovery system is optional, as parameter-tuned or parameter-fixed. Since the method requires no average processing, it is applicable to a single sample with limited length. The numerical simulations reveal that the SR recovery method can recover the waveform containing weak information submerged ha noise effectively. The engineering application to the vibration analysis of metal cutting chose the combination of mono-stable SR and the parameter-fixed recovery system. Because the optimal SR state is not required strongly, the system parameters are tuned in a wider range than the traditional SR processing methods.展开更多
本文提出使用语义增强的Counting B loom FilterReconstruction(RSECBF)算法来快速还原源串或给出源串的聚类特征.它给每个哈希函数独立的哈希映射空间以消除哈希函数的内部冲突;扩展哈希函数使其不受均匀性限制,使得哈希函数可以带有语...本文提出使用语义增强的Counting B loom FilterReconstruction(RSECBF)算法来快速还原源串或给出源串的聚类特征.它给每个哈希函数独立的哈希映射空间以消除哈希函数的内部冲突;扩展哈希函数使其不受均匀性限制,使得哈希函数可以带有语义;利用哈希串的重叠和数量一致性来解决同源哈希串拼接成源串的问题,为源串的还原创造了条件.本文针对Pareto分布的哈希函数,为主成分的还原提出了一个简洁的源串还原算法.对于直接选择部分比特的哈希映射而言,如果主成分分析中的RSECBF不能还原出源串,则还原出来的最长串就是源串的聚类特征.仿真及实际检验表明,B loom Filter可以扩展其哈希函数来实现语义增强,RSECBF还原的结果是可信的.本算法可以在异常行为发生的时候挖掘网络行为特征.展开更多
基金Item Sponsored by National Science and Technology Support Plan of China(2007BAE51B02)
文摘Hot compression tests of P92 steel at temperatures in the range of 1 173 to 1 523 K and at strain rates in the range of 0.1 to 10 s^-1 were carried out on a Gleeble-3500 thermal-mechanical simulator, and the corresponding flow curves were measured. The results showed that the flow stress and the peak strain increase with decreasing deformation temperature and increasing strain rate. The critical Z value, below which the complete dynamic reerystallization may occur, was determined to have 4.61 × 10^18. The hot deformation activation energy of the steel was about 437 kJ/mol. The hot deformation equation and the microstructure diagram of P92 steel were obtained. For the convenience of the practical application, the empirical equation for the peak stress can be described as σp=17. 17lnε＋902499/T-524.1.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2007AA04Z414)National Natural Science Foundation of China (Grant No. 50675153)+1 种基金Tianjin Municipal Natural Science Foundation of China (Grant No. 07JCYBJC04600)Specialized Research Fund for Doctoral Program of Higher Education of China (Grant No. 20060056016)
文摘Stochastic resonance（SR） enhances the nonlinear system behavior with the assistance of noise, including the sensitivity and selectivity of the response to the exterior stimulus. The energy-transfer mechanism makes the weak information revealed in the output spectrum, while the time-waveform is distorted. The distortion analysis was made both from the particle＇s dynan-fics and signal processing. The factors causing the deviation in the output are presented and the function of the recovery system is proposed. By the investigation of the particle＇s motion track in the bistable system and the suggested recovery system, the influences of noise and system parameters on the recovery course were discussed. Moreover, the pulse distortion appearing the recovery waveform caused by the particle＇s transitions at the bistable potential＇ inflexions was explained. Due to different characteristics, cascaded-bistable SR or mono-stable SR was introduced to process different types of signals. The final recovery signal is just the suggested recovery system＇s response to the SR output. Meanwhile, the recovery system is optional, as parameter-tuned or parameter-fixed. Since the method requires no average processing, it is applicable to a single sample with limited length. The numerical simulations reveal that the SR recovery method can recover the waveform containing weak information submerged ha noise effectively. The engineering application to the vibration analysis of metal cutting chose the combination of mono-stable SR and the parameter-fixed recovery system. Because the optimal SR state is not required strongly, the system parameters are tuned in a wider range than the traditional SR processing methods.
