Highly precise acoustic impedance inversion is a key technology for pre-drilling prediction by VSP data. In this paper, based on the facts that VSP data has high resolution, high signal to noise ratio, and the downgoi...Highly precise acoustic impedance inversion is a key technology for pre-drilling prediction by VSP data. In this paper, based on the facts that VSP data has high resolution, high signal to noise ratio, and the downgoing and upgoing waves can be accurately separated, we propose a method of predicting the impedance below the borehole in front of the bit using VSP data. First, the method of nonlinear iterative inversion is adopted to invert for impedance using the VSP corridor stack. Then, by modifying the damping factor in the iteration and using the preconditioned conjugate gradient method to solve the equations, the stability and convergence of the inversion results can be enhanced. The results of theoretical models and actual data demonstrate that the method is effective for pre-drilling prediction using VSP data.展开更多
Synthetic Aperture Radar Interferometry(InSAR)has shown its potential on seismic deformation monitoring since it can achieve the accuracy of centimeter level or even the millimeter level.However,the irregular varietie...Synthetic Aperture Radar Interferometry(InSAR)has shown its potential on seismic deformation monitoring since it can achieve the accuracy of centimeter level or even the millimeter level.However,the irregular varieties of ionosphere can induce the additional phase delay on SAR interferometry,restricting its further application in high-precision deformation monitoring.Although several methods have been proposed to correct the ionospheric phase delay on SAR interferometry,the performances of them haven't been evaluated and compared.In this study,three commonly used methods,including polynomial fitting,azimuth offset and split-spectrum are applied to L'Aquila Earthquake to correct the ionospheric phase delay on two Phased Array type L-band Synthetic Aperture Radar(PALSAR)onboard the Advanced Land Observing Satellite-1(ALOS-1)images.The result indicates that these three methods can effectively correct the ionospheric phase delay error for SAR interferometry,where the standard deviations of the ionosphere-corrected results have decreased by almost a factor of 1.8 times for polynomial fitting method,4.2 times for azimuth offset method and 2.5 times for split-spectrum method,compared to those of the original phase.Furthermore,the result of the sliding distribution inversion of the seismic fault shows the best performance for split-spectrum method.展开更多
文摘Highly precise acoustic impedance inversion is a key technology for pre-drilling prediction by VSP data. In this paper, based on the facts that VSP data has high resolution, high signal to noise ratio, and the downgoing and upgoing waves can be accurately separated, we propose a method of predicting the impedance below the borehole in front of the bit using VSP data. First, the method of nonlinear iterative inversion is adopted to invert for impedance using the VSP corridor stack. Then, by modifying the damping factor in the iteration and using the preconditioned conjugate gradient method to solve the equations, the stability and convergence of the inversion results can be enhanced. The results of theoretical models and actual data demonstrate that the method is effective for pre-drilling prediction using VSP data.
基金National Science Foundation of China(Nos.42074040,41941019,41790445)National Key R&D Program of China(Nos.2020YFC1512001,2019YFC1509800)Shenzhen Science and Technology Program(No.KQTD20180410161218820)。
文摘Synthetic Aperture Radar Interferometry(InSAR)has shown its potential on seismic deformation monitoring since it can achieve the accuracy of centimeter level or even the millimeter level.However,the irregular varieties of ionosphere can induce the additional phase delay on SAR interferometry,restricting its further application in high-precision deformation monitoring.Although several methods have been proposed to correct the ionospheric phase delay on SAR interferometry,the performances of them haven't been evaluated and compared.In this study,three commonly used methods,including polynomial fitting,azimuth offset and split-spectrum are applied to L'Aquila Earthquake to correct the ionospheric phase delay on two Phased Array type L-band Synthetic Aperture Radar(PALSAR)onboard the Advanced Land Observing Satellite-1(ALOS-1)images.The result indicates that these three methods can effectively correct the ionospheric phase delay error for SAR interferometry,where the standard deviations of the ionosphere-corrected results have decreased by almost a factor of 1.8 times for polynomial fitting method,4.2 times for azimuth offset method and 2.5 times for split-spectrum method,compared to those of the original phase.Furthermore,the result of the sliding distribution inversion of the seismic fault shows the best performance for split-spectrum method.
