China stands as one of the leading producers of waste electrical and electronic equipment(WEEE),facing significant challenges in managing the substantial volumes generated.Despite existing regulations,the informal tre...China stands as one of the leading producers of waste electrical and electronic equipment(WEEE),facing significant challenges in managing the substantial volumes generated.Despite existing regulations,the informal treatment of WEEE persists in some areas due to inadequate recycling networks at the city level.Consequently,there is a critical need for a detailed geographical mapping of WEEE generation to address improper disposal practices effectively.This study introduces the cMAC–EEEs(city Material Cycles and Manufactured Capital–EEEs)database,providing estimates of WEEE generation across approximately 300 prefecture-level cities from 1978 to 2017.It focuses on five commonly used types of electrical and electronic equipment(refrigerators,air conditioners,washing machines,computers,TVs)originating from three key sources(urban residents,rural residents,enterprises).The findings reveal(1)significant spatial variation in WEEE generation within China,with eastern and central city clusters identified as hotspots,particularly for urban residents and enterprises,while the western region exhibits the highest growth rate in WEEE generation,notably among rural residents.(2)The growth in obsolete computers and air conditioners is prominent,especially in rural areas and among enterprises,whereas the generation of obsolete TVs,washing machines,and refrigerators is leveling off and expected to decrease in some urban areas.(3)Enterprises account for a substantial portion of WEEE generation,though uncertainties exist,necessitating further refinement.The study highlights that less developed regions lack adequate recycling facilities,with specific limitations in refrigerators and air conditioners recycling capabilities.To enhance WEEE management,it advocates for increased interregional collaboration and capacity building in less developed areas.Additionally,the regulation of WEEE from private enterprises requires improvement.At the product level,a greater focus on recycling practices for refrigerators and air conditioners is re展开更多
The volume tendency of in-use and end-of-life computers in China were analyzed; the emerging danger of obsolete computers by incorrect treatment was summarized; the integration disposal technologies based on 3R (recyc...The volume tendency of in-use and end-of-life computers in China were analyzed; the emerging danger of obsolete computers by incorrect treatment was summarized; the integration disposal technologies based on 3R (recycle, remanufacture and reuse) engineering aiming at monitors, electronic devices, metals, plastics materials, and overall computers were put forward; the economic and social benefits were also analyzed. The results show that the integration disposal process of obsolete computer is an optimum approach to save the resource of electromechanical products. Remanufacturing and disposal 100 thousand obsolete computers per year can create profits about RMB10million yuan and provide employment for 300 persons. It can be deduced that there are great potential opportunities for the obsolete computers disposal industry containing recycle, remanufacture and reuse engineering.展开更多
Fiber-reinforced polymer (FRP) composites have gradually gained wide acceptance as engineering material applications due to their unique advantages including their high strength-to-weight ratio and excellent corrosion...Fiber-reinforced polymer (FRP) composites have gradually gained wide acceptance as engineering material applications due to their unique advantages including their high strength-to-weight ratio and excellent corrosion resistance. This study was carried out with composites prepared by hot press molding method using coconut spathe fiber as reinforcing material and HDPE (from HDPE can as obsolete polymer) as polymer matrix. Composites were made at 150°C under 60 kN load by taking diverse weight percentage (wt.%) of fiber from 0 to 20 of its total weight. In this research investigation, different properties of the composites such as bulk density, water absorption, tensile and flexural properties, impact strength and hardness test properties were carried out. The fiber content enhancement increases the bulk density in all composites. The rate of water absorption improves with the improvement of fiber addition with respect to HDPE in all composites. But the water absorption was not increased uniformly with the increase of fiber addition in composites. In all cases, composites absorbed water very rapidly up to 80 hrs and then water absorption is in saturated condition. The mechanical properties like tensile strength (TS), flexural strength (FS), impact strength (IS) and hardness were observed to be comparatively more enhanced for 5% composite, while further increasing of fiber addition, all mechanical properties changes irregularly. The irregular nature of change might be caused due to the over loading of fiber in polymer matrix.展开更多
Objective To observe the clinical effect of acupuncture on the obsolete lateral malleolus joint sprain. Methods Thirty-one cases of patients with obsolete lateral malleolus joint sprain were selected. Jiexi （解溪 ST...Objective To observe the clinical effect of acupuncture on the obsolete lateral malleolus joint sprain. Methods Thirty-one cases of patients with obsolete lateral malleolus joint sprain were selected. Jiexi （解溪 ST 41） were penetrated to Shenmei （申脉 BL 61）, and Yanglingquan （阳陵泉 GB 34） was applied. The needles were retained for 30 min, and the treatment was performed only once, with follow-up visit after 1 month. Results All the patients were cured after treatment, and without relapse on the follow-up visit after 1 month. Conclusion The clinical effect of acupuncture on the obsolete lateral malleolus joint sprain is remarkable.展开更多
In Kazakhstan, there are obsolete pesticides which should be buried in special dedicated and prepared burial sites or neutralized for minimization of dangerous genetic and ecological risks. The work in two years was i...In Kazakhstan, there are obsolete pesticides which should be buried in special dedicated and prepared burial sites or neutralized for minimization of dangerous genetic and ecological risks. The work in two years was identifying the obsolete pesticides in 91 the former warehouses of chemical plant protection products. In two regions （Almaty and Akmola regions） of Kazakhstan, the total amount of 388.6 tones of obsolete pesticides and unidentified stockpile material was observed, along with 513 pesticide containers. Results of the study have shown that soil around storehouses polluted by organochlorine pesticides residues in soil included metabolites of DDT （p, p＇-dichlorodiphenyltrichloroethane） and HCH （hexachlorocyclohexane）. The strategy was to identify pesticide-tolerant plant genotypes which can be used for phytoremediation of pesticide-contaminated soils in Almaty regions of Kazakhstan. The results have shown that selected wild species plants demonstrated ability to phytoaccumulation of organochlorine metabolites and reduce pesticide concentrations in soil （control without plant）. It was shown that accumulation of pesticides depended on the species of plants, plant biomass and pesticide concentrations in soil. The use of mineral fertilizers resulted in stimulation of growth and biomass accumulation followed by an increasing phytoextraction.展开更多
基金supported by the Strategic Pilot Science and Technology Projects of Chinese Academy of Sciences(XDA23030304)the National Natural Science Foundation of China(Grant Nos.52200214,71961147003,and 52070178)+1 种基金Key Program of Frontier Science of the Chinese Academy of Sciences(QYZDB-SSW-DQC012)the China Scholarship Council(Grant No.201904910422).
文摘China stands as one of the leading producers of waste electrical and electronic equipment(WEEE),facing significant challenges in managing the substantial volumes generated.Despite existing regulations,the informal treatment of WEEE persists in some areas due to inadequate recycling networks at the city level.Consequently,there is a critical need for a detailed geographical mapping of WEEE generation to address improper disposal practices effectively.This study introduces the cMAC–EEEs(city Material Cycles and Manufactured Capital–EEEs)database,providing estimates of WEEE generation across approximately 300 prefecture-level cities from 1978 to 2017.It focuses on five commonly used types of electrical and electronic equipment(refrigerators,air conditioners,washing machines,computers,TVs)originating from three key sources(urban residents,rural residents,enterprises).The findings reveal(1)significant spatial variation in WEEE generation within China,with eastern and central city clusters identified as hotspots,particularly for urban residents and enterprises,while the western region exhibits the highest growth rate in WEEE generation,notably among rural residents.(2)The growth in obsolete computers and air conditioners is prominent,especially in rural areas and among enterprises,whereas the generation of obsolete TVs,washing machines,and refrigerators is leveling off and expected to decrease in some urban areas.(3)Enterprises account for a substantial portion of WEEE generation,though uncertainties exist,necessitating further refinement.The study highlights that less developed regions lack adequate recycling facilities,with specific limitations in refrigerators and air conditioners recycling capabilities.To enhance WEEE management,it advocates for increased interregional collaboration and capacity building in less developed areas.Additionally,the regulation of WEEE from private enterprises requires improvement.At the product level,a greater focus on recycling practices for refrigerators and air conditioners is re
文摘The volume tendency of in-use and end-of-life computers in China were analyzed; the emerging danger of obsolete computers by incorrect treatment was summarized; the integration disposal technologies based on 3R (recycle, remanufacture and reuse) engineering aiming at monitors, electronic devices, metals, plastics materials, and overall computers were put forward; the economic and social benefits were also analyzed. The results show that the integration disposal process of obsolete computer is an optimum approach to save the resource of electromechanical products. Remanufacturing and disposal 100 thousand obsolete computers per year can create profits about RMB10million yuan and provide employment for 300 persons. It can be deduced that there are great potential opportunities for the obsolete computers disposal industry containing recycle, remanufacture and reuse engineering.
文摘Fiber-reinforced polymer (FRP) composites have gradually gained wide acceptance as engineering material applications due to their unique advantages including their high strength-to-weight ratio and excellent corrosion resistance. This study was carried out with composites prepared by hot press molding method using coconut spathe fiber as reinforcing material and HDPE (from HDPE can as obsolete polymer) as polymer matrix. Composites were made at 150°C under 60 kN load by taking diverse weight percentage (wt.%) of fiber from 0 to 20 of its total weight. In this research investigation, different properties of the composites such as bulk density, water absorption, tensile and flexural properties, impact strength and hardness test properties were carried out. The fiber content enhancement increases the bulk density in all composites. The rate of water absorption improves with the improvement of fiber addition with respect to HDPE in all composites. But the water absorption was not increased uniformly with the increase of fiber addition in composites. In all cases, composites absorbed water very rapidly up to 80 hrs and then water absorption is in saturated condition. The mechanical properties like tensile strength (TS), flexural strength (FS), impact strength (IS) and hardness were observed to be comparatively more enhanced for 5% composite, while further increasing of fiber addition, all mechanical properties changes irregularly. The irregular nature of change might be caused due to the over loading of fiber in polymer matrix.
文摘Objective To observe the clinical effect of acupuncture on the obsolete lateral malleolus joint sprain. Methods Thirty-one cases of patients with obsolete lateral malleolus joint sprain were selected. Jiexi （解溪 ST 41） were penetrated to Shenmei （申脉 BL 61）, and Yanglingquan （阳陵泉 GB 34） was applied. The needles were retained for 30 min, and the treatment was performed only once, with follow-up visit after 1 month. Results All the patients were cured after treatment, and without relapse on the follow-up visit after 1 month. Conclusion The clinical effect of acupuncture on the obsolete lateral malleolus joint sprain is remarkable.
文摘In Kazakhstan, there are obsolete pesticides which should be buried in special dedicated and prepared burial sites or neutralized for minimization of dangerous genetic and ecological risks. The work in two years was identifying the obsolete pesticides in 91 the former warehouses of chemical plant protection products. In two regions （Almaty and Akmola regions） of Kazakhstan, the total amount of 388.6 tones of obsolete pesticides and unidentified stockpile material was observed, along with 513 pesticide containers. Results of the study have shown that soil around storehouses polluted by organochlorine pesticides residues in soil included metabolites of DDT （p, p＇-dichlorodiphenyltrichloroethane） and HCH （hexachlorocyclohexane）. The strategy was to identify pesticide-tolerant plant genotypes which can be used for phytoremediation of pesticide-contaminated soils in Almaty regions of Kazakhstan. The results have shown that selected wild species plants demonstrated ability to phytoaccumulation of organochlorine metabolites and reduce pesticide concentrations in soil （control without plant）. It was shown that accumulation of pesticides depended on the species of plants, plant biomass and pesticide concentrations in soil. The use of mineral fertilizers resulted in stimulation of growth and biomass accumulation followed by an increasing phytoextraction.
